Xirgo Technologies XT1000 Wireless Zigbee Sensor User Manual user guide

Download:
Mirror Download [FCC.gov]
Document ID	2381900
Application ID	zYC4LrXz5H4whZZNkiyl8g==
Document Description	user guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.42kB (317778 bits)
Date Submitted	2014-09-08 00:00:00
Date Available	2015-03-07 00:00:00
Creation Date	2014-09-03 17:36:56
Producing Software	Nitro Pro 9 (9. 0. 5. 9)
Document Lastmod	2014-09-03 17:37:02
Document Title	user guide
Document Creator	Nitro Pro 9 (9. 0. 5. 9)

XT-1010 User Guide
Model: XT-1010
FCC ID: GKM-XT1000
IC: 10281A-XT1000
Version 1.1
Table of Contents
Document Change History .......................................................................................... 3
1. Introduction ........................................................................................................... 4
1.1 Feature Matrix................................................................................................................................................................................. 4
2. Hardware Description ............................................................................................. 5
2.1 Hardware Specifications ............................................................................................................................................................. 6
2.2 Cable Harness Description ......................................................................................................................................................... 6
2.3 LED Description.............................................................................................................................................................................. 7
3. Device Mounting Options: ...................................................................................... 7
3.1 Screw Mounting.............................................................................................................................................................................. 7
3.2 Magnetic Mounting........................................................................................................................................................................ 8
3.3 VHB Tape Mounting...................................................................................................................................................................... 8
4. Quick Start Guide.................................................................................................... 9
4.1 Device Installation......................................................................................................................................................................... 9
4.2 Pairing the XT1010Z and the XT4860G5 ...........................................................................................................................10
4.3 Unpairing Devices........................................................................................................................................................................10
Document Change History
Revision
1.0
1.1
Date
8/28/2014
9/2/2014
Author
Johnny Chen
Johnny Chen
Changes
Document Creation
Revision Based on Nader’s Feedback
1. Introduction
The XT-1010 is a wireless ZigBee sensor that pairs with the XT-4860G5 generally known as the Base
Unit to provide inclination data based on a 3-axis digital accelerometer readout with an accuracy of
±1 degree. Additional general purpose digital IO sensors can also be queried and transmitted to the
XT-4860G5. The XT-1010 leverages a high efficiency solar energy harvesting platform to support long
term, remote deployments without the burden of frequent battery replacement. This installation
guide describes the physical hardware, associated parts, mounting options, and a quick start-up
procedure.
1.1 Feature Matrix
Feature Description
High Efficiency Solar Panel
6600mAh Rechargeable Li-Ion Battery
Diagnostic LEDs
Optional Digital IO Sensors and 1-Wire Serial Bus
ZigBee pairing with XT-4860G5
Inclinometer Data based on 3-axis Dig Accel. with 1 deg. accuracy
Over-the-air FW upgrade via XT-4860G5
XT-1010







2. Hardware Description
Below is a depiction of key interfaces of the XT-1010:
ZigBee Pairing
Button
Device Label
8-Pin Bayonet
Connector
Solar Panel
LED Indicators
An optional Cable Harness that interfaces with the unit is shown below. The Cable provides
external power, when available, as well as interface to the IO HW options
2.1 Hardware Specifications
ZigBee Specification
Technology
Frequency Band
Antenna gain
Transmit power
Data Rate
Power Requirements
D.C. Power (if Avail.)
Battery
Physical Connection
Interface Connector
Programming
Mechanical
Case Material
Dimension
Weight
Operating Temperature
Protection Rating
ZigBee IEEE 802.15.4 DSSS modem
2405-2483.5MHz
0.5 dBi (peak again), -0.5 dBi (Average gain)
12dBm/MHz
250 kbps
8-24V, 12 V nominal
Internal 6600mAh rechargeable Li-Ion
8-pin Bayonet type
Serial (UART Logic Level)
ABS plastic with weather-proofing for outdoor use
7.6” X 4.9” X 1.4”
18 oz.
-30°C to +70°C
IP67
2.2 Cable Harness Description
Pin #
Wire
Color
Pin Name
White
IN1
Yellow
IN2
Black
Green
Ground
Out
Blue
UART-Rx
Brown
UART-Tx
Red
Orange
VBATT
ADC
Functional Description
Port Characteristic
Ignition Sense
Input port
8v to 24v, Internally pulled low
2.4 to 24V, < 0.2 V
Note: Internally pulled high
Ground
Output Port (Defaulted open circuit)
External battery negative terminal
Main battery voltage, DC
Analog Input
3.3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None; 8N1
3.3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None;8N1
8-24 V, 12V Nom.
8-24 V
2.3 LED Description
LED
GPS (Green)
Description
Pairing Successful
Stand-by for Pairing
Status
Solid for 30 Seconds then OFF
Blinking Steadily
3. Device Mounting Options:
3.1 Screw Mounting
The XT-1010 can be mounted via 4 mounting screw, 2 per side as depicted below.
3.2 Magnetic Mounting
The XT-1010 can also be provided with 4 pre-installed (or kitted separately) magnets as depicted
below.
3.3 VHB Tape Mounting
For semi-permanent mounting option, the device can be mounted with 3M VHB tape as shown
below.
4. Quick Start Guide
4.1 Device Installation
The XT1010 (Sensor unit) pairs with the XT-4860G5 (Base unit) and provides inclinometer data
based on the on-board 3-axis digital accelerometer output which in turn is transmitted to end
user Server over the cellular network. The proper installation of the unit is critical to acquiring
accurate inclinometer data. An application note entitled “Installing and Pairing the XT-4860 and
XT-1010 for Wireless Inclinometer Functionality” contains detailed instructions for installing and
pairing the two devices. This quick start guide will give you basic steps for installation and
pairing of the two devices. Refer to the application note for any additional detail and instructions.
FACE BASE UNIT
FACE SENSOR
When installing the device, make sure the Base unit (XT-4860G5) faces the Sensor unit (XT-1010)
Each Unit has a label near the 8-pin Connector to show the direction of device installation. The
Base and the Sensor must be on the same plane and facing each other for optimal performance.
The picture below illustrates the ideal orientation of the two devices
As an example, below depicts possible mounting positions of the two Units for a man-lift
application.
4.2 Pairing the XT1010Z and the XT4860G5
With both Base and Sensor units properly oriented, the pairing process of the two devices can
begin. Note that only one Sensor unit can be paired with one Base unit. During the pairing process,
the devices are calibrated and normalized relative to each other. Once the calibration is complete,
the Devices must not be moved or repositioned.
To begin the pairing process, press the black button located near the circular connector on the
side of the Base unit for 5 seconds. You should see the amber LED light (marked with “Z”) flashing
4 times per second. This LED pattern signifies that the Base unit is searching for the Sensor unit
that it is meant to pair with. There is a 60-second window for the pairing process to complete. If
the pairing process was not successful within 60 seconds, then the unit will return to its
configured normal state and the process needs to be repeated if pairing is still needed. At any
time during pairing, the process can be stopped or reset by pressing and holding the button on
either device for 15 seconds, then releasing, or by simply waiting for a timeout.
Pairing Button
During the Base unit 60-second pairing time, press and hold the pairing button on the Sensor unit
for 5 seconds. The green LED (marked with a “C”) will flash 4 times per second as well. A typical
pairing process takes about 3 to 5 seconds after pressing the pairing buttons of both Units. After
successful pairing, the Base unit’s orange LED will turn off and the Sensor unit’s green LED will
turn solid for 30 seconds, then it will turn off. After the pairing process, the Sensor unit will
automatically send inclinometer data to the base unit at a rate of 1 sample per 5 seconds.
4.3 Un-pairing Devices
To un-pair a set of paired XT-4860 and XT-1010 devices, press and hold the button on the XT4860 device for 15 seconds, then release. That device will attempt to notify its XT-1010 pair of
the pairing reset. There is no LED feedback for a pairing reset. The pairing reset can be performed
individually on an XT-4860 or XT-1010 device if the paired device is no longer present.
10
FCC/IC:
REGULATORY COMPLIANCE INFORMATION
This equipment with FCC-ID: GKM-XT1000 and IC: 10281A-XT-1000, Model: XT-1010
is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.
NOTICE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications of
Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Les changements ou modifications non expressément approuvés par la partie responsable de la conformité
pourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le onctionnemen
Radio frequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2014:09:03 17:36:56Z
Modify Date                     : 2014:09:03 17:37:02Z
XMP Toolkit                     : 3.1-701
Creator Tool                    : Nitro Pro 9  (9. 0. 5. 9)
Metadata Date                   : 2014:09:03 17:37:02Z
Format                          : application/pdf
Creator                         : 
Title                           : 
Description                     : 
Keywords                        : 
Producer                        : Nitro Pro 9  (9. 0. 5. 9)
Document ID                     : uuid:b2104b3f-a0e6-4262-841b-3f16599a6c4a
Page Mode                       : UseNone
Page Count                      : 11

EXIF Metadata provided by EXIF.tools