Xmark IPSR 434MHz International Patient Security Receiver User Manual
Xmark Corporation 434MHz International Patient Security Receiver Users Manual
Xmark >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1384915 |
| Application ID | AIWZv2gTTNGDaDPusA0Pbg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.69kB (583665 bits) |
| Date Submitted | 2010-12-02 00:00:00 |
| Date Available | 2010-12-03 00:00:00 |
| Creation Date | 2010-10-15 13:12:20 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2010-10-15 13:13:15 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS4 (6.0.5) |
Service Light The red service light is located on the lower side of the Receiver, next to the service pin, and is used for troubleshooting. Red Service LED state Off Flashing every 0.5 sec. Description Normal operation. Unconfigured Receiver. Run Auto Configure using the PS System Manager. On Failure. Check power supply to the device. Download Neuron firmware to the Receiver using the PS System Manager. Momentarily Service pin pressed. on Warranty Stanley Healthcare Solutions’ products are warranted against defects in materials and workmanship and shall perform in accordance with published specifications for a period of one year. Stanley Healthcare Solutions’ warranty is limited solely to the repair or replacement of the defective part or product. Stanley Healthcare Solutions reserves the right to change product specifications without notice. Limitation of Liability This Product has been designed for use to assist in the prevention of patient abduction and/or wandering incidents. The range, accuracy, function and performance of this Product may vary from the published specifications due to many factors, including, but not limited to, site impairments from structural effects, metal objects in the vicinity, placement of the receiver and transmitter, interference from other electrical devices, atmospheric effects, installation, and maintenance. There may be other factors, which also affect performance of this Product. XMARK Corporation (“XMARK”) does not guarantee that this Product will detect 100% of patient abductions and/or wandering incidents, nor does XMARK guarantee that this Product will not return false reports of calls for patient abductions and/or wandering incidents. Monthly testing and maintenance of this Product, as described in the Product documentation, is essential to verify the system is operating correctly and to ensure that the probability of detecting an alarm and/or locating the transmitter are maximized. The failure to undertake regular testing and maintenance will increase the risk of system failure and failure to detect patient abductions and/or wandering incidents. The failure to undertake regular testing and maintenance will increase the risk of false reports of patient abductions and/or wandering incidents. XMARK hereby disclaims all warranties, express or implied, arising out of or in connection with any of its Products of the use or performance thereof, including but not limited to, where allowable by law, all other implied warranties or conditions of merchantability, fitness for a particular purpose, and those arising by statute or otherwise in law or from a course of dealing or usage of trade. XMARK’s liability to you or anyone claiming through or on behalf of you with respect to any claim or loss arising out of the use or misuse of XMARK’s Product, defective products or materials, improper installation or maintenance of XMARK’s Product or products or the system in which they are incorporated, or alleged to have resulted from an act or omission of XMARK or any person, negligent or otherwise, shall be limited to the following, at XMARK’s sole option: 1) the repair or replacement of defective Product or materials supplied by XMARK during the warranty period as set out in the Product documentation; or, at the option of XMARK, 2) a refund of the purchase price of the Product supplied by XMARK. In no event shall XMARK be liable for general, specific, indirect, consequential, incidental, exemplary or punitive damages or any losses or expenses suffered by you or anyone else, whether or not XMARK, or its employees, officers, agents, resellers or installers has been informed of the risk of such loss or expense and whether or not such losses or expenses were foreseeable. Statements United States—Federal Communication Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Changes or modifications not expressly approved by XMARKcouldvoidtheuser’sauthoritytooperatetheequipment. Canada—Industry Canada The term “IC:” before the certification/registration number only signifies that Industry Canada technical specifications were met. European Union—CE Declaration XMARK hereby declares that this radio frequency receiver is in compliance with the essential requirements and other relevant provisions of the following EU directives: (1) RTTE Directive 1999/5/EC, (2) CE mark Directive 2004/108/CE, and (3) LVD 2006/95/EC. Patient Security Receiver Installation Guide Patient Security Receiver Installation Guide Part Number: 816A1001 Important! Have you: • Pulled network and power cable? • Resolved power supply requirements? • Selected the location for the PS Receiver? Read these instructions thoroughly before installing the PS Receiver. Faulty installation can lead to system failure. Materials Required • International Patient Security Receiver (p/n 816A1001) • Facility floor plan indicating Receiver position and network wiring path • 105 Ω network terminator (p/n 805A2401) - if this is the last device on the network segment Specifications Model Part Number Frequency Supply Voltage Current Draw International Patient Security Receiver 816A1001 434.17 MHz 12-30 VDC 150 mA max. @ 12 V, 80 mA max. @ 24V Detection 35 ft. (11 m) for typical Receiver setup Radius 50 ft (15 m) Receiver in open space Communications LonWorks two wire Ethernet port - currently nonfunctional. Temperature Operating: 32°F to 120°F (0°C to 49°C) Storage: -22° to 158° F (-30° to 70°C) Humidity 0-85% RH @ 70°F (21°C), non-condensing Dimensions Approximately 6.1 x 4.9 x 1.7 in. (155 x 125 x 45 mm) Weight Approximately 8.5 oz. (240 g) Recommended Receiver Antenna Orientation For best coverage, ensure that the antennas are at least 3 ft. (91 cm) from metal objects, such as framing or air ducts. Do not encase, wrap, or otherwise cover the antennas. One antenna must be pointing downward with the second antenna aimed horizontally into a clear area, free of metal objects. The two antennas must be at right angles to one another. Use the illustrations below as a guideline for antenna orientation. 309 Legget Drive Ottawa, ON K2K 3A3 Canada Telephone: 1.866.559.6275 International: +1 (613) 592.6997 Facsimile: (613) 592.4296 Web site: www.stanleyhealthcare.com © 2010 XMARK Corporation. All Rights Reserved. Printed in Canada. October 2010. 981-806009-000 Rev 03. Certified to the ISO 9001 Quality Standard Installation Considerations • Position the Receiver beneath ceiling obstructions— When installing above drop ceilings, mount the Receiver below metal duct work and pipes • If ceiling tiles are foil-backed, mount Receiver below. • Route cables up and away from the Receiver—When the cable is not in conduit, route it directly away from the Receiver for at least 1 foot (30 cm). • Install the Receiver temporarily until testing is complete—Fastenings should be secure enough that the Receiver can be permanently mounted without disturbing its orientation. • Point the horizontal antenna into a clear area, away from metal objects—One antenna always points downwards, with the second antenna (horizontal) at a 90 degree angle (can be adjusted to suit site conditions). Make sure the horizontal antenna is not running parallel to cabling in the ceiling. • Observe temperature and humidity restrictions— Refer to the Specifications table. • Leave slack in the cable—Leave at least 10 ft. (3 m) of slack in the communication and power cables to allow for adjustments in the location of the Receiver. • No user adjustments to internal circuitry—Tampering may cause component or system failure, or both, and will void the warranty. Installing the Patient Security Receiver • Ensure that the power supply and network are turned off to prevent electrical shock or damage to equipment. • Touch your hand to ground to discharge any electrostatic charge before handling the Receiver. 4 Install the Mounting Plate. Referring to the facility floor plan, decide the position of the Receiver. Do not place near metal objects and structural frames. Ensure that the service light will be visible and that space is allowed for the antennas. Install the mounting plate using one of the following methods. A Fasten to a suspended ceiling guy wire, using: • 1 multi-function Caddy clip • 2 machine screws • 2 hex nuts • 2 lock washers, OR B Install directly to a ceiling or a wall using: • 2 wood screws • 2 hollow wall anchors, OR Install to a receptacle box, using: • 2 machine screws 5 Install the Receiver to the Mounting Plate. Plug the wired terminal block into the Receiver and install the Receiver onto the Mounting Plate, using the screws removed in Step 2. DO NOT place excess network and power supply wires inside the Receiver case. 6 Attach the two clips to lock the antennas in place. Do not supply power to the Receiver or any other network device until all connections are complete. Final Steps Once all devices are installed, power up the Receiver and other devices. Using the PS System Manager, run Auto Configure to install the new devices, and then configure them for operation. The coverage area of the Receiver must also be checked. The steps below correspond to the numbers in Figure 1. Status Light 1 Record the LonWorks Neuron ID number. The green status light is located on the front of the Locate and record the LonWorks Neuron ID number Receiver, and indicates the current status of the Receiver. onto the facility floor plan indicating the Receiver’s Green Status LED Description position and network wiring path. Affix one of the state supplied Neuron ID labels on the floor plan and affix Off No tags within range or no power. the other on the Receiver in a visible location. Flashing The Receiver is receiving tag 2 Remove the Mounting Plate from the Receiver by coincident with transmissions. sliding it off. If the Receiver is to be installed to a tag transmissions receptacle box, pass the network and power supply Flashing steady Wink command currently operating. wires through the hole in the Mounting Plate. for two seconds, NOTE: Intermittent flashes between off for one the steady two second flash indicates 3 Wire the terminal block. second repeatedly the presence of tags within the area. Connect the LonWorks Network IN, Network Failure. Check power connections or On OUT, and Power Supply to the terminals. If the download firmware to the Receiver Receiver is at the end of the network segment, using the PS System Manager. then terminate the network segment with a 105 Ω terminator. Patient Security Receiver Installation Guide If the Receiver is not at the end of the network segment, connect the wires as shown below. If the Receiver is at the end of the network segment, use a terminator as shown below. ! Labelled "OUT" ! Labelled "OUT" DO NOT CONNECT DO NOT CONNECT ITEM A 105 terminator (at each end of network) NETWORK NEG- POS+ IN POWER (non-polarized) NETWORK NETWORK NEG- POS+ OUT IN POWER (non-polarized) (non-polarized) For ceiling mounts, fasten to a suspended ceiling guy wire using a caddy clip. 4B Place one Neuron ID label on the Receiver in a visible location. Figure 1: Physical Connections for the Receiver Patient Security Receiver Installation Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2010:10:15 13:12:20-04:00 Modify Date : 2010:10:15 13:13:15-04:00 Metadata Date : 2010:10:15 13:13:15-04:00 Creator Tool : Adobe InDesign CS4 (6.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11440 bytes, use -b option to extract) Version ID : 1 Instance ID : uuid:475b97c7-0a64-481b-b7fa-2ab61c39df31 Document ID : xmp.did:2F7A49C581A4DE11BAF2969FAE6B7795 Original Document ID : adobe:docid:indd:28a52c56-7a8f-11dc-a0f2-ae93726622ec Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:2E7A49C581A4DE11BAF2969FAE6B7795 Derived From Document ID : xmp.did:94788163300FDE118A33EEC5A8D3B8D7 Derived From Original Document ID: adobe:docid:indd:28a52c56-7a8f-11dc-a0f2-ae93726622ec Derived From Version ID : 1 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:1964A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1A64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1B64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1C64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1D64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1E64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:1F64A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:2064A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:2164A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:2264A93FE6E3DD11A2C794D3A61AD0AF, xmp.iid:8637F14503E4DD11A2C794D3A61AD0AF, xmp.iid:8737F14503E4DD11A2C794D3A61AD0AF, xmp.iid:8837F14503E4DD11A2C794D3A61AD0AF, xmp.iid:8937F14503E4DD11A2C794D3A61AD0AF, xmp.iid:8A37F14503E4DD11A2C794D3A61AD0AF, xmp.iid:6CF8E67232E6DD118916ACB3508D2723, xmp.iid:6DF8E67232E6DD118916ACB3508D2723, xmp.iid:6EF8E67232E6DD118916ACB3508D2723, xmp.iid:6FF8E67232E6DD118916ACB3508D2723, xmp.iid:70F8E67232E6DD118916ACB3508D2723, xmp.iid:73F8E67232E6DD118916ACB3508D2723, xmp.iid:74F8E67232E6DD118916ACB3508D2723, xmp.iid:75F8E67232E6DD118916ACB3508D2723, xmp.iid:A860090CF4E6DD11BAC1CB79C1004D31, xmp.iid:40769619AC02DE11A8EFE692575998A0, xmp.iid:41769619AC02DE11A8EFE692575998A0, xmp.iid:42769619AC02DE11A8EFE692575998A0, xmp.iid:43769619AC02DE11A8EFE692575998A0, xmp.iid:2CF87E4C3E03DE11AD44E80E326101EB, xmp.iid:2DF87E4C3E03DE11AD44E80E326101EB, xmp.iid:2EF87E4C3E03DE11AD44E80E326101EB, xmp.iid:2FF87E4C3E03DE11AD44E80E326101EB, xmp.iid:30F87E4C3E03DE11AD44E80E326101EB, xmp.iid:31F87E4C3E03DE11AD44E80E326101EB, xmp.iid:32F87E4C3E03DE11AD44E80E326101EB, xmp.iid:33F87E4C3E03DE11AD44E80E326101EB, xmp.iid:34F87E4C3E03DE11AD44E80E326101EB, xmp.iid:35F87E4C3E03DE11AD44E80E326101EB, xmp.iid:DCD3822E6A03DE11AD44E80E326101EB, xmp.iid:DDD3822E6A03DE11AD44E80E326101EB, xmp.iid:DED3822E6A03DE11AD44E80E326101EB, xmp.iid:DFD3822E6A03DE11AD44E80E326101EB, xmp.iid:E0D3822E6A03DE11AD44E80E326101EB, xmp.iid:E1D3822E6A03DE11AD44E80E326101EB, xmp.iid:E2D3822E6A03DE11AD44E80E326101EB, xmp.iid:E3D3822E6A03DE11AD44E80E326101EB, xmp.iid:E4D3822E6A03DE11AD44E80E326101EB, xmp.iid:E5D3822E6A03DE11AD44E80E326101EB, xmp.iid:E6D3822E6A03DE11AD44E80E326101EB, xmp.iid:93784CE01404DE11B33C84CAE99FDFE5, xmp.iid:94784CE01404DE11B33C84CAE99FDFE5, xmp.iid:95784CE01404DE11B33C84CAE99FDFE5, xmp.iid:96784CE01404DE11B33C84CAE99FDFE5, xmp.iid:97784CE01404DE11B33C84CAE99FDFE5, xmp.iid:98784CE01404DE11B33C84CAE99FDFE5, xmp.iid:99784CE01404DE11B33C84CAE99FDFE5, xmp.iid:9A784CE01404DE11B33C84CAE99FDFE5, xmp.iid:9B784CE01404DE11B33C84CAE99FDFE5, xmp.iid:9C784CE01404DE11B33C84CAE99FDFE5, xmp.iid:F9A9EEA34604DE11B33C84CAE99FDFE5, xmp.iid:CCAB66FDCC04DE11B586E6343EECA750, xmp.iid:ED6FFE85D804DE11A9F3A0567523697F, xmp.iid:EE6FFE85D804DE11A9F3A0567523697F, xmp.iid:EF6FFE85D804DE11A9F3A0567523697F, xmp.iid:F06FFE85D804DE11A9F3A0567523697F, xmp.iid:F16FFE85D804DE11A9F3A0567523697F, xmp.iid:F26FFE85D804DE11A9F3A0567523697F, xmp.iid:F36FFE85D804DE11A9F3A0567523697F, xmp.iid:F46FFE85D804DE11A9F3A0567523697F, xmp.iid:F56FFE85D804DE11A9F3A0567523697F, xmp.iid:C017B4B3EE04DE118340B5119B3EB6DB, xmp.iid:C117B4B3EE04DE118340B5119B3EB6DB, xmp.iid:C217B4B3EE04DE118340B5119B3EB6DB, xmp.iid:C317B4B3EE04DE118340B5119B3EB6DB, xmp.iid:C417B4B3EE04DE118340B5119B3EB6DB, xmp.iid:C717B4B3EE04DE118340B5119B3EB6DB, xmp.iid:D6473139F704DE11B284B2C5EA69D042, xmp.iid:D7473139F704DE11B284B2C5EA69D042, xmp.iid:D8473139F704DE11B284B2C5EA69D042, xmp.iid:D9473139F704DE11B284B2C5EA69D042, xmp.iid:B9F661F30405DE11B284B2C5EA69D042, xmp.iid:BAF661F30405DE11B284B2C5EA69D042, xmp.iid:278084477F0ADE119139B5F0ECF6E073, xmp.iid:288084477F0ADE119139B5F0ECF6E073, xmp.iid:298084477F0ADE119139B5F0ECF6E073, xmp.iid:2A8084477F0ADE119139B5F0ECF6E073, xmp.iid:2B8084477F0ADE119139B5F0ECF6E073, xmp.iid:2C8084477F0ADE119139B5F0ECF6E073, xmp.iid:2D8084477F0ADE119139B5F0ECF6E073, xmp.iid:308084477F0ADE119139B5F0ECF6E073, xmp.iid:1637447D8B0ADE119139B5F0ECF6E073, xmp.iid:89CA46B1A70CDE118804D5293C0E0958, xmp.iid:E9621E036E0DDE11B8AE998F1BD9CFD8, xmp.iid:EA621E036E0DDE11B8AE998F1BD9CFD8, xmp.iid:F5A5D054FE0EDE11840799A18E826AAB, xmp.iid:F6A5D054FE0EDE11840799A18E826AAB, xmp.iid:F7A5D054FE0EDE11840799A18E826AAB, xmp.iid:F8A5D054FE0EDE11840799A18E826AAB, xmp.iid:F9A5D054FE0EDE11840799A18E826AAB, xmp.iid:FAA5D054FE0EDE11840799A18E826AAB, xmp.iid:FBA5D054FE0EDE11840799A18E826AAB, xmp.iid:41F04A462A0FDE118A33EEC5A8D3B8D7, xmp.iid:42F04A462A0FDE118A33EEC5A8D3B8D7, xmp.iid:90788163300FDE118A33EEC5A8D3B8D7, xmp.iid:91788163300FDE118A33EEC5A8D3B8D7, xmp.iid:92788163300FDE118A33EEC5A8D3B8D7, xmp.iid:93788163300FDE118A33EEC5A8D3B8D7, xmp.iid:94788163300FDE118A33EEC5A8D3B8D7, xmp.iid:2E7A49C581A4DE11BAF2969FAE6B7795, xmp.iid:2F7A49C581A4DE11BAF2969FAE6B7795, xmp.iid:307A49C581A4DE11BAF2969FAE6B7795, xmp.iid:D40135F394E6DE118279EE865621AA25, xmp.iid:D50135F394E6DE118279EE865621AA25, xmp.iid:D60135F394E6DE118279EE865621AA25, xmp.iid:D70135F394E6DE118279EE865621AA25, xmp.iid:F342040EC2E8DE11A558D85A5659BC73, xmp.iid:F442040EC2E8DE11A558D85A5659BC73, xmp.iid:28A2A2EDE2EBDE119971D67617B9C72D, xmp.iid:29A2A2EDE2EBDE119971D67617B9C72D, xmp.iid:2BA2A2EDE2EBDE119971D67617B9C72D, xmp.iid:08078B5F1510DF118CEFE275EE439BE6, xmp.iid:F46040D8D217DF118A1381CAEC89F0A2, xmp.iid:EEFE8FEF27C7DF119CEEDF39B8B0BF00, xmp.iid:71BF2FE1ADD7DF118B7B921AF904EDFB, xmp.iid:72BF2FE1ADD7DF118B7B921AF904EDFB, xmp.iid:73BF2FE1ADD7DF118B7B921AF904EDFB, xmp.iid:74BF2FE1ADD7DF118B7B921AF904EDFB, xmp.iid:75BF2FE1ADD7DF118B7B921AF904EDFB, xmp.iid:C29827547FD8DF118D8CBF763AF6DA49 History When : 2009:01:16 10:56:34-05:00, 2009:01:16 10:56:34-05:00, 2009:01:16 10:58:19-05:00, 2009:01:16 11:18:45-05:00, 2009:01:16 11:25:23-05:00, 2009:01:16 11:34:09-05:00, 2009:01:16 11:38:39-05:00, 2009:01:16 11:40:21-05:00, 2009:01:16 13:50:47-05:00, 2009:01:16 13:55:16-05:00, 2009:01:16 14:24:20-05:00, 2009:01:16 15:08:21-05:00, 2009:01:16 15:16:01-05:00, 2009:01:16 15:17:15-05:00, 2009:01:16 15:18:17-05:00, 2009:01:19 09:07:04-05:00, 2009:01:19 09:16:45-05:00, 2009:01:19 09:52:50-05:00, 2009:01:19 09:54:36-05:00, 2009:01:19 10:50:26-05:00, 2009:01:19 10:53:48-05:00, 2009:01:19 10:55:12-05:00, 2009:01:19 11:19:45-05:00, 2009:01:20 08:12:53-05:00, 2009:02:24 14:48:25-05:00, 2009:02:24 14:49:32-05:00, 2009:02:24 14:53:42-05:00, 2009:02:24 15:43:31-05:00, 2009:02:25 08:14:57-05:00, 2009:02:25 08:33:53-05:00, 2009:02:25 09:27:05-05:00, 2009:02:25 09:27:54-05:00, 2009:02:25 09:28:14-05:00, 2009:02:25 09:28:39-05:00, 2009:02:25 10:54-05:00, 2009:02:25 10:55:11-05:00, 2009:02:25 11:02:44-05:00, 2009:02:25 11:04:07-05:00, 2009:02:25 13:29:04-05:00, 2009:02:25 13:32:29-05:00, 2009:02:25 13:33:26-05:00, 2009:02:25 14:02:20-05:00, 2009:02:25 14:02:20-05:00, 2009:02:25 14:28:35-05:00, 2009:02:25 14:50:22-05:00, 2009:02:25 14:55:07-05:00, 2009:02:25 15:00:12-05:00, 2009:02:25 15:07:22-05:00, 2009:02:25 15:10:02-05:00, 2009:02:26 09:50:57-05:00, 2009:02:26 10:26:34-05:00, 2009:02:26 10:38:06-05:00, 2009:02:26 11:10:19-05:00, 2009:02:26 11:36:48-05:00, 2009:02:26 13:44:12-05:00, 2009:02:26 13:49:52-05:00, 2009:02:26 13:52:04-05:00, 2009:02:26 15:05:22-05:00, 2009:02:26 15:06:38-05:00, 2009:02:26 15:47:11-05:00, 2009:02:27 07:48:53-05:00, 2009:02:27 09:11:27-05:00, 2009:02:27 09:25:59-05:00, 2009:02:27 09:48:51-05:00, 2009:02:27 10:48:12-05:00, 2009:02:27 10:52:01-05:00, 2009:02:27 10:53:43-05:00, 2009:02:27 10:53:58-05:00, 2009:02:27 10:56:08-05:00, 2009:02:27 10:58:12-05:00, 2009:02:27 11:50:13-05:00, 2009:02:27 11:50:33-05:00, 2009:02:27 12:03:21-05:00, 2009:02:27 12:29:40-05:00, 2009:02:27 12:31:05-05:00, 2009:02:27 12:36:37-05:00, 2009:02:27 13:22:31-05:00, 2009:02:27 13:23:29-05:00, 2009:02:27 13:24:51-05:00, 2009:02:27 14:20:52-05:00, 2009:02:27 14:29:28-05:00, 2009:02:27 14:34:48-05:00, 2009:03:06 13:47:44-05:00, 2009:03:06 13:54:24-05:00, 2009:03:06 14:02:37-05:00, 2009:03:06 14:03:15-05:00, 2009:03:06 14:05:07-05:00, 2009:03:06 14:11:10-05:00, 2009:03:06 15:08:54-05:00, 2009:03:06 15:14:41-05:00, 2009:03:06 15:34:34-05:00, 2009:03:09 08:42:04-04:00, 2009:03:10 08:38:32-04:00, 2009:03:10 08:39:22-04:00, 2009:03:12 08:07:17-04:00, 2009:03:12 09:38:13-04:00, 2009:03:12 09:43:08-04:00, 2009:03:12 09:44:51-04:00, 2009:03:12 10:53:36-04:00, 2009:03:12 10:54:54-04:00, 2009:03:12 11:23:01-04:00, 2009:03:12 13:54:59-04:00, 2009:03:12 14:01:32-04:00, 2009:03:12 14:05:36-04:00, 2009:03:12 14:15:11-04:00, 2009:03:12 14:15:38-04:00, 2009:03:12 14:17:28-04:00, 2009:03:12 14:17:28-04:00, 2009:09:18 14:37:25-04:00, 2009:09:18 14:37:25-04:00, 2009:09:18 14:39:01-04:00, 2009:12:11 16:19:29-05:00, 2009:12:11 16:20:55-05:00, 2009:12:11 16:23:57-05:00, 2009:12:11 16:24:36-05:00, 2009:12:14 10:13:48-05:00, 2009:12:14 10:15:22-05:00, 2009:12:18 09:43:49-05:00, 2009:12:18 09:46:52-05:00, 2009:12:18 10:15:55-05:00, 2010:02:02 11:09:42-05:00, 2010:02:12 07:33:38-05:00, 2010:09:23 11:37:36-04:00, 2010:10:14 12:12:45-04:00, 2010:10:14 12:25:19-04:00, 2010:10:14 12:26:22-04:00, 2010:10:14 13:54:04-04:00, 2010:10:14 14:25:06-04:00, 2010:10:15 13:12:02-04:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 72.00 Manifest Placed Y Resolution : 300.00, 300.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches Manifest Reference Instance ID : uuid:0b450788-6b7e-11d7-8c91-c1a675903b1e, uuid:0b450788-6b7e-11d7-8c91-c1a675903b1e, xmp.iid:8EF8CA98870ADE11BF6CDC3452F2AA46 Manifest Reference Document ID : adobe:docid:photoshop:0b450782-6b7e-11d7-8c91-c1a675903b1e, adobe:docid:photoshop:0b450782-6b7e-11d7-8c91-c1a675903b1e, xmp.did:8EF8CA98870ADE11BF6CDC3452F2AA46 Doc Change Count : 5690 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CS4 (6.0.5)EXIF Metadata provided by EXIF.tools