YASUI and 10651000 IC Reader User Manual Manual

YASUI & CO. IC Reader Manual

Manual

IC ReaderI snstructionYASUI CO & .YASUI Bldg 3 7 4 Ikejiri Setagaya ku Tokyo154 0001 Japan , - - , , - , , - ,
- . , , - // , - .- , , .- / .- .- , , .- 　 .- .The manufacuture shall in no event be liable for any damageresulting from improper use Negligence to follow the warningsand cautions in the instructions manual or the labels on themachine unskillfulness use of non original optional consumableaccessories spase parts non authorized modificationThe manufacture shall in no event be liable for any conseqentialor indirect damages including but not limited to loss of productionor loss of profit or damages due to machine downtimeDamages to the instrument and or human bodies resulting fromcontacting with high temperature parts are not compensated by themanufacturerDameges resulting from delay of reaction at emergency andmistaken operation are not compensated by the manufacturerDameges from electrical noise over voltege or wiring error arenot compensated by the manufacturerMold production results or casting results by the machine or bythis manual are not compensated by the manufacturerNo part of this document may be copied or in any way reproducedwithout the expressed writing consent of the manufacturer
■Specifications・T connected to model name IC , and this product is a reading and writing product of the IC tagshis product ICR d s only CAccording to the upper figure, please connect ICC and ICR d.operation methodPlease refer to ICC manual.Attention in the settingPlease do not put the corner which is heavy goods / sharpness on the main body and the cord.Please do not soak it in water.MaintenanceWhen water appeared, please wipe it off with clean cloth immediately.Please do not wipe it with an organic solvent (thinner benzine). , - i .-< >　　　・< > ・ ・・< > ・ ・　　 Product name IC ReaderModel number ICR-dRadio Frequency 13.56MHｚCorrespondence IC tag ISO-1593Cable 1ｍPower supply DC5V, 200mAConsumption electricity About 600ｍW (Max 1000mW)Maximum Tx power 200mWUse environment Temperature 0～50℃　Humidity 20～80％A thing without the dew condensationSave environment Temperature -10～70℃　Humidity 10～90％A thing without the dew condensationICR d-ICCThis telecommunication equipment conformsto NTC technical requirement FCC ID: X3D10651000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Note: This equipment has been tested and found to comply with the limits for a Class B Digital Device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu