YASUI and 10651000 IC Reader User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1231598
Application ID	IcH0iWNFSmnyhTAF4Q0+uQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.82kB (197701 bits)
Date Submitted	2010-01-22 00:00:00
Date Available	2010-01-22 00:00:00
Creation Date	2010-01-07 17:05:32
Producing Software	AntennaHouse PDF Driver 2.0.0-sn
Document Lastmod	2010-01-07 17:05:32
Document Title	Manual

I C R e a de r
Instructions
YA S U I & CO .
YASUI Bldg , 3 - 7 - 4 , Ikejiri , Setagaya - ku , Tokyo ,
154 - 0001 , Japan
- The manufacuture shall in no event be liable for any damage
resulting from improper use . Negligence to follow the warnings
and cautions in the instructions manual or the labels on the
machine , unskillfulness , use of non - original optional / consumable
accessories / spase parts , non - authorized modification .
- The manufacture shall in no event be liable for any conseqential
or indirect damages including , but not limited to , loss of production
or loss of profit or damages due to machine downtime .
- Damages to the instrument and / or human bodies resulting from
contacting with high temperature parts are not compensated by the
manufacturer .
- Dameges resulting from delay of reaction at emergency and
mistaken operation are not compensated by the manufacturer .
- Dameges from electrical noise , over voltege , or wiring error are
not compensated by the manufacturer .
- Mold production results or casting results by the machine or by
this manual are not compensated by the manufacturer .
- No part of this document may be copied or in any way reproduced
without the expressed writing consent of the manufacturer .
■Spe ci fi cati on s
Product name
Model number
Radio Frequency
Correspondence IC tag
Cable
Power supply
Consumption electricity
Maximum Tx power
IC Reader
ICR-d
13.56MHｚ
ISO-1593
1ｍ
DC5V, 200mA
About 600ｍW (Max 1000mW)
200mW
Temperature 0～50℃ Humidity 20～80％
Use environment
A thing without the dew condensation
Temperature -10～70℃ Humidity 10～90％
Save environment
A thing without the dew condensation
This telecommunication equipment conforms
to NTC technical requirement
FCC ID: X3D10651000
・T his product , ICR - d i s connected only to model name IC C , and this
product is a reading and writing product of the IC tags .
ICR - d
ICC
・According to the upper figure, please connect ICC and ICR - d.
< operation method >
・Please refer to ICC manual.
< Attention in the setting >
・Please do not put the corner which is heavy goods / sharpness
on the main body and the cord.
・Please do not soak it in water.
< Maintenance >
・When water appeared, please wipe it off with clean cloth
immediately.
・Please do not wipe it with an organic solvent (thinner benzine).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Note:
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2010:01:07 17:05:32+09:00
Modify Date                     : 2010:01:07 17:05:32+09:00
Producer                        : AntennaHouse PDF Driver 2.0.0-sn
Page Count                      : 4

EXIF Metadata provided by EXIF.tools