YASUI and 10651000 IC Reader User Manual Manual
YASUI & CO. IC Reader Manual
Manual
IC Reader
I snstruction
YASUI CO & .
YASUI Bldg 3 7 4 Ikejiri Setagaya ku Tokyo
154 0001 Japan
, - - , , - , ,
- ,
-
.
, , - /
/ , - .
-
, ,
.
- /
.
-
.
- , ,
.
-
.
-
.
The manufacuture shall in no event be liable for any damage
resulting from improper use Negligence to follow the warnings
and cautions in the instructions manual or the labels on the
machine unskillfulness use of non original optional consumable
accessories spase parts non authorized modification
The manufacture shall in no event be liable for any conseqential
or indirect damages including but not limited to loss of production
or loss of profit or damages due to machine downtime
Damages to the instrument and or human bodies resulting from
contacting with high temperature parts are not compensated by the
manufacturer
Dameges resulting from delay of reaction at emergency and
mistaken operation are not compensated by the manufacturer
Dameges from electrical noise over voltege or wiring error are
not compensated by the manufacturer
Mold production results or casting results by the machine or by
this manual are not compensated by the manufacturer
No part of this document may be copied or in any way reproduced
without the expressed writing consent of the manufacturer
■Specifications
・T connected to model name IC , and this
product is a reading and writing product of the IC tags
his product ICR d s only C
According to the upper figure, please connect ICC and ICR d.
operation method
Please refer to ICC manual.
Attention in the setting
Please do not put the corner which is heavy goods / sharpness
on the main body and the cord.
Please do not soak it in water.
Maintenance
When water appeared, please wipe it off with clean cloth
immediately.
Please do not wipe it with an organic solvent (thinner benzine).
, - i
.
-
< >
・
< >
・
・
・
< >
・
・
Product name IC Reader
Model number ICR-d
Radio Frequency 13.56MHｚ
Correspondence IC tag ISO-1593
Cable 1ｍ
Power supply DC5V, 200mA
Consumption electricity About 600ｍW (Max 1000mW)
Maximum Tx power 200mW
Use environment Temperature 0～50℃ Humidity 20～80％
A thing without the dew condensation
Save environment Temperature -10～70℃ Humidity 10～90％
A thing without the dew condensation
ICR d-ICC
This telecommunication equipment conforms
to NTC technical requirement
FCC ID: X3D10651000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Note:
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.