YEALINK T56A Smart Media Phone User Manual Yealink SIP T56A Quick Start Guide V80 10

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. Smart Media Phone Yealink SIP T56A Quick Start Guide V80 10

Users Manual

Download: YEALINK T56A Smart Media Phone User Manual Yealink SIP T56A Quick Start Guide V80 10
Mirror Download [FCC.gov]YEALINK T56A Smart Media Phone User Manual Yealink SIP T56A Quick Start Guide V80 10
Document ID3342305
Application IDK8dK8F3CZAT5KIXxMN9PNA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize287.91kB (3598937 bits)
Date Submitted2017-04-01 00:00:00
Date Available2017-04-01 00:00:00
Creation Date2017-02-17 18:23:45
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2017-04-01 17:28:29
Document TitleYealink_SIP-T56A_Quick_Start_Guide_V80_10
Document CreatorAdobe Illustrator CS6 (Windows)

Smart Media Phone
SIP-T56A
Quick Start Guide (V80.10)
www.yealink.com
Applies to firmware version 58.80.0.10 or later.
Packaging Contents
The following items are included in your package. If you find anything missing, contact your system
administrator.
IP Phone
Handset
Handset Cord
Ethernet Cable
(2m CAT5E FTP cable)
Quick Start Guide
Power Adapter
(Optional)
Stand
Wall Mount Bracket
(Optional)
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved
third-party accessories may result in reduced performance.
Assembling the Phone
1. Attach the stand, as shown below:
PUSH
2. Attach the optional wall mount bracket, as shown below:
PUSH
Note: The hookswitch tab has a lip which allows the handset to stay on-hook when the IP phone is mounted
vertically. For more information, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.
3. Connect the handset and optional headset, as shown below:
PC
Internet
DC5V
Note: The headset should be purchased separately.
4. Connect the optional USB flash drive, as shown below:
Note: The USB port can also be used to connect color-screen expansion module EXP50 or USB headset. For more
information on how to use EXP50, refer to Yealink EXP50 User Guide. For more information on how to use
USB headset, refer to the documentation from the manufacturer.
5. Connect the AC power or PoE, as shown below:
Power Adapter
(DC 5V)
PC
Internet
PC
Internet
DC5V
AC Power Option
DC5V
PoE ( Power over
Ethernet ) Option
IEEE 802.3af compliant
PoE Hub/Switch
Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party
power adapter may cause the damage to the phone.
6. Connect to the network, as shown below:
You have two options for network connection. You can select one of them according to the current office
environment.
a) Connect to the wired network:
PC
PC Connection
(Optional)
PC
Internet
DC5V
Note: If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by
Yealink.
b) Connect to the wireless network:
1) Swipe down from the top of the screen to enter the control center.
2) Tap Settings->Basic->Wi-Fi.
3) Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available wireless networks in your area.
4) Select an available wireless network from the list of networks.
5) If the network is secure, enter its password in the Password field.
6) Tap Connect to connect to the wireless network.
Hardware Component Instructions
32
14
14
13
12
10
1211
1215
Item
Item
Item
Power Indicator LED
Speakerphone Key
11
Keypad
Touch Screen
TRANSFER Key
12
Speaker
HEADSET Key
HOLD Key
13
Hookswitch Tab
MUTE Key
MESSAGE Key
14
Hookswitch
REDIAL Key
10
Volume Key
15
USB2.0 port
Startup
After the IP phone is connected to the network
and supplied with power, it automatically begins
the initialization process. After startup, the
phone is ready for use. You can configure the
phone via web user interface or phone user
interface.
Welcome
Initializing...
Please wait
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Settings->Status to obtain the IP address of the phone.
3. Open a web browser on your computer, enter the IP address into the address bar
(e.g., "http://192.168.0.10" or "192.168.0.10"), and then press Enter.
4. Enter the user name (default: admin) and password (default: admin) in the login page and click
Confirm.
Network Settings: Click on Network->Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain
its valid network settings, e.g., IP address, subnet mask, gateway address and DNS
address.
Static IP Address: If the phone cannot contact a DHCP server for any reason, you need to
configure IP address, subnet mask, gateway address, primary DNS address
and secondary DNS address for the phone manually.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via
PPPoE mode. Contact the ITSP for the PPPoE user name and password.
Note: The IP phone also supports IPv6, but IPv6 is disabled by default.
The wrong network settings may result in inaccessibility of your phone and may have an impact on the
network performance. Contact your system administrator for more information.
Account Settings: Click on Account->Register->Account X (X=1,2,3...15,16)
Parameters of the account:
Register Status:
It shows the register status of the current account.
Line Active:
You can select Enabled/Disabled to enable/disable the account.
Label:
It is shown on the touch screen to identify the account.
Display Name:
It is shown as Caller ID when placing a call.
Register Name:
It is an authenticated ID for authentication provided by ITSP (required).
User Name:
It is provided by ITSP for registration (required).
Password:
It is provided by ITSP for registration (required).
Server Host:
It is provided by ITSP for registration (required).
Register status icons on the touch screen:
(Gray) Register Failed
(Green) Registered
(Green and Flashing) Registering
Note: Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
Configuring via phone user interface
Network Settings:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Settings->Advanced (default password: admin)->Network->WAN Port/VLAN
/Webserver Type/802.1x/VPN/LLDP/CDP/NAT to configure the network.
Account Settings:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Settings->Advanced (default password: admin)->Accounts to configure the account.
Using Your Phone
Status Icons
The icons on the status bar of the touch screen give information about phone:
Icons
Description
(White)
Shows that Wi-Fi is turned on.
(Green)
Shows that the phone is connected to wireless network successfully.
(White)
Shows that Bluetooth is turned on.
Shows that wired network is unavailable.
(Green)
Shows that Bluetooth headset is paired successfully.
(Green)
Shows that Bluetooth-Enabled mobile phone is paired successfully.
Shows that the phone is locked.
Shows that “Forward” is turned on.
Shows that “Do Not Disturb” is turned on.
Shows that “Auto Answer” is turned on.
Shows that you have missed calls.
Shows that you have unread voice mails.
Shows that “Silent” is turned on.
Shows that a USB flash drive is detected.
Using the Touch Screen
By default, the IP phone supports three idle screens. The home screen displays as below:
Status Bar
Phone Dialer
Digital Clock Widget
Directory
Tap to add DSS keys.
History
Android Keys
Screen Indicator
To navigate the touch screen:
Swipe left or right to switch among different idle screens.
Tap
to go back to the previous screen.
Tap
to return to the idle screen.
Tap
to view and manage recently used applications.
To change the wallpaper:
1. Long tap the empty spot on the idle screen.
2. Tap WALLPAPERS.
3. Select a desired picture.
4. Tap Set wallpaper.
To add a widget to the idle screen:
1. Long tap the empty spot on the idle screen.
2. Tap WIDGETS.
3. Drag the desired widget up/down/left/right to the destination spot on the idle screen.
Control Center and Notification Center
Swipe down from the top of the screen to enter the control center and the notification center.
Display the phone’s time and date.
Control Center
To turn on/off common functions quickly, capture a
screenshot or go to the Settings screen, tap
corresponding icons.
To adjust the screen brightness, drag the slider.
Notification Center
Notification center displays the list of Notification,
Missed Calls, Voice Mail and Forwarded.
To delete all notifications, tap
To delete a specific notification, swipe left or right.
To view the details, tap the desired notification message.
Android keys.
Swipe up from the bottom of the screen to hide this screen.
Entering and Updating Data
To use onscreen keyboard:
1.Tap the input field, the onscreen keyboard will display on the touch screen:
Tap to backspace.
Label automatically to identify the
context-sensitive features.
Tap Next to go to next field.
Tap Done to confirm the settings.
Tap Send to dial out the number.
Tap Go to browse the web page.
Tap to switch to the uppercase input mode.
Tap to switch to the numeric&symbolic input
mode.
Tap to access input options to configure Input Languages or Android Keyboard Settings(AOSP).
2.When you finish entering, tap
to hide the onscreen keyboard.
To use keypad:
Dial or enter number.
To select a field option:
Tap the field name, tap the desired option in the pop-up dialog box.
Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then tap Send.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then tap Send.
Using the headset:
1. With the headset connected, press
to activate the headset mode.
2. Enter the number, and then tap Send.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Ending a Call
Using the handset:
Hang up the handset or tap the EndCall soft key.
Using the speakerphone:
Press
or tap the EndCall soft key.
Using the headset:
Tap the EndCall soft key.
Redial
Press
to enter the Placed Calls list, and then tap the desired entry.
Press
twice when the phone is idle to dial out the last dialed number.
Call Mute and Un-mute
Press
to mute the microphone during a call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press
or tap the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press
or tap the Resume soft key.
If there is more than one call on hold, tap the call you want to resume, and press
the Resume soft key.
or tap
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press
or tap the Transfer soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press
Semi-Attended Transfer
1. Press
or tap the Transfer soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or tap the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press
or tap the Transfer soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or tap the Transfer soft key when the second party answers.
Call Forward
To enable call forward:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Settings->Features->Call Forward.
3. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
4. Enter the number you want to forward to. For No Answer Forward, tap the After Ring Time
field, and then tap the desired ring time to wait before forwarding.
5. Tap
to accept the change.
Call Conference
1. Tap the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press
or tap Conference.
3. Tap the Conference soft key again when the second party answers. All parties are now joined in
the conference.
4. Tap the EndCall soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by tapping the Split soft key.
Voice Message
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting
at the message center. The power indicator LED slowly flashes red.
To listen to voice messages: (Ensure the voice mail code is already configured on the phone.)
1. Do one of the following:
Press
Swipe down from the top of the screen to enter the notification center, tap Voice Mail and
then select the desired item.
2. Follow the voice prompts to listen to your voice messages.
Customizing Your Phone
Call History
1. Tap
, and then select the desired call list on the left.
2. Drag up and down to scroll.
3. Tap
after the desired entry, and then you can do the following:
Tap Send to place a call.
Tap Add to add the entry to the local directory.
Tap Edit to edit the phone number of the entry before placing a call.
Tap Blacklist to add the entry to the blacklist.
Tap Delete to delete the entry from the list.
Contact Directory
To add a contact:
1. Tap , and then select the desired group on the left.
2. Tap
to add a contact.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
4. Tap
to accept the change.
To edit a contact:
1. Tap , and then select the desired group on the left.
2. Tap
after the desired contact.
3. Edit the contact information.
4. Tap
to accept the change.
To delete a contact:
1. Tap , and then select the desired group on the left.
2. Tap
after the desired contact and then tap Delete.
3. Tap OK when the touch screen prompts “Delete selected item?”.
Note: You can add contacts from call history easily. For more information, refer to Call History above.
Volume Adjustment
Press
Press
Press
during a call to adjust the receiver volume of the handset/speakerphone/headset.
when the phone is idle or ringing to adjust the ringer volume.
to adjust the media volume in the corresponding screen.
10
FCC Statement
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
''This product meets the applicable Innovation, Science and Economic Development Canada technical
specifications. / Ce produit répond à la innovation, des sciences et de Développement économique Canada
spécifications techniques applicables.”
''The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected
to a telephone interface. The termination of an interface may consist of any combination of devices subject
only to the requirement that the sum of the RENs of all the devices not exceed five. / Le nombre équivalent
de sonneries (REN) indique le nombre maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut consister en une combinaison de dispositifs, à la seule
condition que la somme des REN de tous les dispositifs ne dépasse pas cinq.''
About us
Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP
products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today,
customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network
communications.
More about Yealink
Since 2001, Yealink has continued to develop state-of-the art, hi-tech VoIP communication terminals that include IP
video phones, IP phones and USB phones. With a worldwide market in more than 140 countries, the company has also
established a first-class international service network.
Our priorities are quality, functionality, ease-of-use, customer support and competitive pricing. To provide new solutions
for the future in this fast-evolving sector, Yealink’s large, talented and highly-experienced VoIP R&D team is totally
purcommitted to the suit of excellence.
To date, we have passed more than 80 interoperability tests and meet certification requirements set by leading VoIP
system and platforms. Yealink works in close partnership with T-Mobile, Telefonica, Portugal Telecom and other leading
telecommunication service providers.
Canada Statement
This device complies with Industry Canada's licence-exempt RSSs.Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage;
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users
can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed
and operated with a minimum distance of 20 centimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé
et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
6 938818 301665
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: 309, 3th Floor, No.16, Yun Ding North Road, Huli
District, Xiamen City, Fujian, P.R. China
Copyright©2017 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : Yealink_SIP-T56A_Quick_Start_Guide_V80_10
Metadata Date                   : 2017:02:17 18:23:45+08:00
Modify Date                     : 2017:04:01 17:28:29+08:00
Create Date                     : 2017:02:17 18:23:45+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 48
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 3205 bytes, use -b option to extract)
Instance ID                     : uuid:8a92167e-690d-4cc9-82b8-e20375bf5f7a
Document ID                     : xmp.did:4C1DFAC9FAF4E611A45CF3B050E9F357
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:1a4d0651-6019-4f94-8f79-99215862d9e9
Derived From Document ID        : xmp.did:68BF1C617EEAE611B29FE640C2CEFCA0
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:CFF3F11B3221E511B89FBE75B7751C66, xmp.iid:4C1DFAC9FAF4E611A45CF3B050E9F357
History When                    : 2015:07:03 11:18+08:00, 2017:02:17 18:23:39+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\yl1037\Desktop\T56-CONTROL.jpg, C:\Users\yl1037\Desktop\2.jpg, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\lock_icon.png, C:\Users\yl1037\Desktop\T49\images\蓝牙手机1.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\wifi_open.png, E:\yealink\T57V\资源\图标\net32.png, C:\Users\yl1005\Desktop\Ug\titlebar_usb.png, C:\Users\yl1005\Desktop\icon_call_miss.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\blue_tooth_connecting_0.png, C:\Users\yl1005\Desktop\dss_forward_down.png, C:\Users\yl1005\Desktop\Ug\sgdsg.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\ring_mute.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\auto_answer.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\blue_tooth_connecting_0.png, C:\Users\yl1005\Desktop\dss_dnd.png, \\10.3.5.202\phone-src\yealink\resource\Pics\T49\49.80.251.27\images\icon\wifi_open.png, E:\yealink\T57V\资源\图标\14.1dss增加.png, E:\yealink\T57V\资源\图标\13.2方形点击.png, E:\yealink\T57V\资源\图标\12.2圆形点击态.png, E:\yealink\T57V\资源\图标\11.2三角点击态.png, C:\Users\yl1037\Desktop\33.1推出键.png, E:\yealink\T57V\资源\图标\3.1确认添加.png, E:\yealink\T57V\资源\图标\3.1确认添加.png, E:\yealink\T57V\资源\图标\3.1确认添加.png, E:\yealink\T57V\资源\图标\6.2左侧联系人.png, E:\yealink\T57V\资源\图标\6.2左侧联系人.png, E:\yealink\T57V\资源\图标\6.3左侧历史记录.png, E:\yealink\T57V\资源\图标\6.2左侧联系人.png, E:\yealink\T49+CP860-最终定稿\注册图标变\dss_line_registered_down.png, E:\yealink\T49+CP860-最终定稿\注册图标变\dss_line_fail_down.png, E:\yealink\T49+CP860-最终定稿\注册图标变\dss_line_down.png, C:\Users\yl1005\Desktop\nc_clean_up.png, C:\Users\yl1005\Desktop\wifi_info.png, C:\Users\yl1005\Desktop\wifi_info.png, C:\Users\yl1005\Desktop\wifi_info.png, E:\yealink\T57V\资源\P图\onscreen.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 145.000279
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Font Name                       : 096-CAI978, 104-CAI978, ArialMT, MicrosoftNewTaiLue, MicrosoftPhagsPa, MicrosoftPhagsPa-Bold, AdobeSongStd-Light, MicrosoftYaHei-Bold
Font Family                     : 096-CAI978, 104-CAI978, Arial, Microsoft New Tai Lue, Microsoft PhagsPa, Microsoft PhagsPa, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, Regular, Regular, Regular, Regular, Bold, L, Bold
Font Type                       : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 1.00 December 13, 1998, initial release, Version 1.00 January 3, 1999, initial release, Version 5.21, Version 5.90, Version 5.90, Version 5.90, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 6.02
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : 57763=096-CAI978.ttf, 57781=104-CAI978.ttf, arial.ttf, ntailu.ttf, Microsoft_PhagsPa.ttf, Microsoft PhagsPa bold.ttf, AdobeSongStd-Light (v5.010).otf, msyhbd.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Creator                         : Adobe Illustrator CS6 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: T2C-T56A

Navigation menu