YEALINK W60B DECT IP Base Station User Manual Yealink W60B W56H Quick Start Guide V81 1

YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD. DECT IP Base Station Yealink W60B W56H Quick Start Guide V81 1

User Manual

Quick Start Guide(V81.30) DECT IP Phonewww.yealink.com For W60B firmware 77.81.0.30 or laterFor W56H firmware 61.81.0.30 or laterW60B & W56H
Packaging Contents W56H HandsetUSB Charger CradlePower AdapterBelt Clip1Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Note: Yealink W60 DECT IP phone consists of one W60B base station and one W56H handset.W56H Package ContentsW56H Handset W60B Base Station Base Stand USB Charger CradleBelt Clip 2 Power AdaptersEthernet Cable Rechargeable Battery Quick Start Guide Handset Protective Case (Optional)Rechargeable Battery Quick Start Guide Handset Protective Case (Optional)W60 Package Contents
1. Connect the base station power and the network using Method a or Method b.a. AC Power Option b. PoE (Power over Ethernet) Option2Note: If you choose Method a, use Yealink supplied power adapter (5V/600mA). A third-party power adapter may damage the base station. If you choose Method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant. Packaging Contents IEEE 802.3af compliant PoE Hub/SwitchMACSN 2a. (Desktop Installation) Attach and remove the base stand.W60B Base Station Base Stand Power Adapter Ethernet Cable Quick Start GuideW60B Package ContentsAssembling the DECT PhoneMACSN MACSN Attach the Base Stand Remove the Base StandAlign the snap-fits with the corresponding holes and push forward, snapping them into the holes.Remove the snap-fits from the holes horizontally.
3. Insert the battery into the handset.4. Attach the Belt Clip.35. (Optional) Mount the charger cradle to the wall.36.00mm1:136mmMACSN 59mm59mmMACSN battery2b. (Wall-Mount Installation) Attach the base station.
6. Connect the charger cradle and charge the handset. 4ShortcutsShortcut keys help you quickly access to frequently used phone features. Check the default shortcut keys below:Press the left soft key to access the call history.Press the right soft key to check the line status. Press to place an internal call.Press to increase the ringer volume. Press to access the directory.Press to decrease the ringer volume. Press one or more times to switch among different input modes or enter “#”. Press to select the special characters or enter “*”. Press a digit key one or more times to enter the desired character or digit. Press the Del soft key to delete entered characters. Press the Save soft key to accept the change or to cancel. Note: Use Yealink supplied power adapter (5V/600mA). A third-party power adapter may damage the handset. Check the charging status on the top right corner of the LCD screen.225453166Entering and Editing Data134Getting Started
Network SettingsDHCPYou can configure the base station to obtain network settings in one of the following ways: 5Easy Registration: Normal Registration: Handset RegistrationYou can register up to 8 handsets to one W60B base station. Each handset can be registered to 4 different base stations.When the handset LCD screen prompts “Press base paging 2s then press Reg.”, long press on the base station till the registration LED flashes. There are two methodsto register a new handset: 1.Press the OK soft key on the handset, and then select Register Handset.2.Select the desired base station and then press the OK soft key. The handset begins searching the base station.3.Press the OK soft key after searching a base station successfully. 4.Enter the base station PIN (default: 0000), and then press the Done soft key to complete registration.1.Press the Reg soft key on the handset to register quickly.To register to multiple base stations, press the OK to enter the main menu, and select Settings->Registration->Register Handset, then repeat steps 2-4. Note: If the handset is registered to the base station successfully, the handset LCD screen prompts “Handset Subscribed” and “Base NO.”( last 4 characters indicate the base station’s MAC address). If the handset LCD screen prompts “Searching for Base”, check if your base station is powered on or not.By default, the base station attempts to contact a DHCP server in your network to obtain the valid network settings, e.g., IP address, subnet mask, gateway address and DNS address.
Static6To configure the network parameters for the base station manually: 1.Press the OK key to enter the main menu, and then select Settings->System Settings->Network (default PIN: 0000)->Basic.3.Press to select the corresponding IP address mode.2.Select the desired IP address mode from the IP Mode field. 4.Make the desired changes.5.Press the Save soft key to accept the change. Turning Handset On/OffTo turn the handset on, do one of the following: Place the handset in the charger cradle. The handset will be turned on automatically.To turn the handset off:Locking/Unlocking KeypadSilent ModePress , then the LCD screen lights up. Long press to turn the handset off. Long press when the handset is idle to switch the silent mode to On. Long press when the handset is idle to lock the keypad. Long press again to switch the silent mode to Off. Long press again to unlock the keypad. Note: The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6 is disabled by default. Wrong network settings may result in inaccessibility of your DECT phone may affect the network performance. Contact your system administrator for the network parameters.Basic OperationsIf the base station cannot contact a DHCP server for any reason, you need to configure the IP address, subnet mask, gateway address, primary DNS address and secondary DNS address for the base station manually.
Handset Name 1.Press the OK key to enter the main menu, and then select Settings->Handset Name. 3.Press the Save soft key to accept the change. Ring Tones4.Press the Save soft key to accept the change. Local DirectoryTo add a contact:1.Press the OK key to enter the main menu, and then select Directory. 3.Enter the desired value in the Name, Number, Mobile and Extension field respectively. 2.Press the Options soft key, and then select New Contact. 4.Press the Save soft key to accept the change. To edit a contact:1.Press the OK key to enter the main menu, and then select Directory. Press or when the handset is idle or ringing to adjust the ringer volume. Volume AdjustmentPress or during a call to adjust the receiver volume of speakerphone/earpiece/earphone. 3.Press or to select the desired ring tone. 2.Press or to highlight the desired entry. To rename the handset:3.Press the Options soft key, and then select Edit. 4.Edit the value in the Name, Number, Mobile and Extension field respectively. 5.Press the Save soft key to accept the change. To delete a contact:1.Press the OK key to enter the main menu, and then select Directory. 3.Press the Options soft key, and then select Delete to delete the selected entry. 2.Press or to highlight the desired entry. 7 2.Press or to highlight the Intercom Call option or the desired line. 2.Edit the value in the Rename field. 1.Press the OK key to enter the main menu, and then select Settings->Audio->Ring Tones->Melodies.Handset Settings
Placing CallsTo place a call from the local directory: To place a call from the call history:To assign a speed dial number: 1.Press the History soft key when the handset is idle, and then select the desired call history list. To place a call directly:1.Press when the handset is idle. Enter the desired number when the handset is idle.2.Press or to highlight the desired entry, and then press or to dial out using the default line. To place a call from the redial list:1.Press when the handset is idle.2.Press or to highlight the desired entry, and then press or . If multiple numbers for the contact are stored, press or to highlight the desired number, and then press or again to dial out using the default line. 82.Press or to highlight the desired entry, and then press or to dial out using the default line. 1.Press the OK key to enter the main menu, and then select Settings->Telephony-> Speed Dial. 2.Press or to highlight the desired digit key, and then press the Assign soft key. 3.Press or to highlight the desired entry, and then press the OK soft key. If both the office number and mobile number are stored, press or to highlight the desired number, and then press the OK soft key again.Press to enter the pre-dialing screen.Enter the desired number using the keypad.If there are multiple lines assigned to your handset as outgoing lines, press the Line soft key to select the desired line. If you do not select a line, the handset uses the default outgoing line to dial out.2.Press , or to dial out. 1.Do one of the following:Basic Call Features
To place a call using the speed dial key: Long press the speed dial key to call the preset number directly. Answering CallsTo answer a call, do one of the following:Press the Accept soft key. Ending CallsPress . Press .Press .Call Hold and ResumeTo place a call on hold:To resume a call, do one of the following:If there is only a call on hold, press the Resume soft key. Press the Options soft key during a call, and then select Hold. If there are two calls on hold, press the Resume soft key to resume the current call.Press the Swap soft key to swap between calls. Blind TransferCall TransferYou can transfer a call in the following ways:1.Press the Options soft key during a call, and then select Transfer. Call MutePress again to un-mute the call. Press during a call to mute the call. 9Press .Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by pressing .3.Press the Transfer soft key. 2.Enter the number you want to transfer the call to.
Semi-Attended TransferAttended TransferCall Forward1.Press the Options soft key during a call, and then select Transfer. 1.Press the Options soft key during a call, and then select Transfer. 2.Enter the number you want to transfer the call to.To enable the call forward feature on a specific line:Always----Incoming calls are forwarded immediately. Busy----Incoming calls are forwarded when the line is busy. No Answer----Incoming calls are forwarded if not answered after a period of time. 1.Press the OK key to enter the main menu, and then select Call Features->Call Forward. 5.Enter the number you want to forward the incoming calls to in the Target field. 6.Press the Save soft key to accept the change. 2.Enter the number you want to transfer the call to. 4.Press the Transfer soft key after the call is answered. 4.Select Enabled from the Status field. For No Answer Forward, press or to select the desired ring time to wait before forwarding in the After Ring Time field. 2.Press or to highlight the desired line, and then press the OK soft key. 3.Press or to highlight the desired forwarding type, and then press the OK soft key.104.Press the Transfer soft key when you hear the ring-back tone. 3.Press , or to dial out. 3.Press , or to dial out.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.Web: www.yealink.comAddr: 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. ChinaCopyright©2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved.About YealinkTechnical SupportVisit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you to use Yealink Ticketingsystem (https://ticket.yealink.com) to submit all your technical issues.Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider that primarily offers video conferencing systems and voice communication solutions. Founded in 2001, Yealink leverages its independent research and development and innovation to pursue its core mission: “Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s second-largest SIP phone provider and is number one in the China market.W6 0 - E N

Navigation menu