YEALINK W60B DECT IP Base Station User Manual Yealink W60B W56H Quick Start Guide V81 1

Download:
Mirror Download [FCC.gov]
Document ID	3570710
Application ID	jnCgUJwIPQXbHi/Z+AMkVg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	175.78kB (2197226 bits)
Date Submitted	2017-09-20 00:00:00
Date Available	2017-09-20 00:00:00
Creation Date	2017-08-04 13:47:05
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-08-04 13:47:05
Document Title	Yealink W60B & W56H Quick Start Guide_V81_1
Document Creator	Adobe Illustrator CS6 (Windows)

DECT IP Phone
W60B & W56H
Quick Start Guide(V81.30)
www.yealink.com
For W60B firmware 77.81.0.30 or later
For W56H firmware 61.81.0.30 or later
W60 Package Contents
Packaging Contents
W56H Handset W60B Base Station
Ethernet Cable
Belt Clip
Base Stand
USB Charger Cradle
Rechargeable Battery Quick Start Guide
2 Power Adapters
Handset Protective Case
(Optional)
Note: Yealink W60 DECT IP phone consists of one W60B base station and one W56H handset.
W56H Package Contents
W56H Handset
Rechargeable Battery
USB Charger Cradle
Quick Start Guide
Belt Clip
Power Adapter
Handset Protective Case (Optional)
Note: We recommend that you use the accessories provided or approved by Yealink. The use
of unapproved third-party accessories may result in reduced performance.
W60B Package Contents
W60B Base Station
Base Stand
Power Adapter
Ethernet Cable
Quick Start Guide
Assembling the DECT Phone
Packaging Contents
1. Connect the base station power and the network using Method a or
Method b.
a. AC Power Option
b. PoE (Power over Ethernet) Option
IEEE 802.3af compliant
PoE Hub/Switch
Note:
If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand
Remove the Base Stand
MAC
MAC
MAC
SN
SN
SN
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
Remove the snap-fits from the
holes horizontally.
2b. (Wall-Mount Installation) Attach the base station.
MAC
MAC
SN
SN
59m
59m
3. Insert the battery into the handset.
battery
4. Attach the Belt Clip.
5. (Optional) Mount the charger cradle to the wall.
36.00mm
36m
1:1
6. Connect the charger cradle and charge the handset.
Note:
Use Yealink supplied power adapter (5V/600mA). A third-party power adapter may
damage the handset.
Check the charging status on the top right corner of the LCD screen.
Getting Started
Shortcuts
Shortcut keys help you quickly access to frequently used phone features. Check the
default shortcut keys below:
Press
to place an internal call.
Press
to decrease the ringer volume.
Press the left soft key to access the call history.
Press the right soft key to check the line status.
Press
to increase the ringer volume.
Press
to access the directory.
Entering and Editing Data
Press
one or more times to switch among different input modes or enter “#”.
Press
to select the special characters or enter “*”.
Press a digit key one or more times to enter the desired character or digit.
Press the Del soft key to delete entered characters.
Press the Save soft key to accept the change or
to cancel.
Handset Registration
You can register up to 8 handsets to one W60B base station. Each handset can be
registered to 4 different base stations.
When the handset LCD screen prompts “Press base paging 2s then press Reg.”, long
press
on the base station till the registration LED flashes. There are two methods
to register a new handset:
Easy Registration:
1.Press the Reg soft key on the handset to register quickly.
Normal Registration:
1.Press the OK soft key on the handset, and then select Register Handset.
2.Select the desired base station and then press the OK soft key. The handset begins
searching the base station.
3.Press the OK soft key after searching a base station successfully.
4.Enter the base station PIN (default: 0000), and then press the Done soft key to
complete registration.
To register to multiple base stations, press the OK to enter the main menu, and select
Settings->Registration->Register Handset, then repeat steps 2-4.
Note: If the handset is registered to the base station successfully, the handset LCD
screen prompts “Handset Subscribed” and “Base NO.”( last 4 characters indicate
the base station’s MAC address).
If the handset LCD screen prompts “Searching for Base”, check if your base
station is powered on or not.
Network Settings
You can configure the base station to obtain network settings in one of the following
ways:
DHCP
By default, the base station attempts to contact a DHCP server in your network to
obtain the valid network settings, e.g., IP address, subnet mask, gateway address and
DNS address.
Static
If the base station cannot contact a DHCP server for any reason, you need to configure
the IP address, subnet mask, gateway address, primary DNS address and secondary
DNS address for the base station manually.
To configure the network parameters for the base station manually:
1.Press the OK key to enter the main menu, and then select Settings->System
Settings->Network (default PIN: 0000)->Basic.
2.Select the desired IP address mode from the IP Mode field.
3.Press
to select the corresponding IP address mode.
4.Make the desired changes.
5.Press the Save soft key to accept the change.
Note:
The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6
is disabled by default.
Wrong network settings may result in inaccessibility of your DECT phone may affect
the network performance. Contact your system administrator for the network
parameters.
Basic Operations
Turning Handset On/Off
To turn the handset on, do one of the following:
Press
, then the LCD screen lights up.
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Long press
to turn the handset off.
Locking/Unlocking Keypad
Long press
when the handset is idle to lock the keypad.
Long press
again to unlock the keypad.
Silent Mode
Long press
when the handset is idle to switch the silent mode to On.
Long press
again to switch the silent mode to Off.
Handset Settings
Handset Name
To rename the handset:
1.Press the OK key to enter the main menu, and then select Settings->Handset Name.
2.Edit the value in the Rename field.
3.Press the Save soft key to accept the change.
Volume Adjustment
Press
or
Press
or
/earphone.
when the handset is idle or ringing to adjust the ringer volume.
during a call to adjust the receiver volume of speakerphone/earpiece
Ring Tones
1.Press the OK key to enter the main menu, and then select Settings->Audio->Ring
Tones->Melodies.
2.Press
or
to highlight the Intercom Call option or the desired line.
3.Press
or
to select the desired ring tone.
4.Press the Save soft key to accept the change.
Local Directory
To add a contact:
1.Press the OK key to enter the main menu, and then select Directory.
2.Press the Options soft key, and then select New Contact.
3.Enter the desired value in the Name, Number, Mobile and Extension field
respectively.
4.Press the Save soft key to accept the change.
To edit a contact:
1.Press the OK key to enter the main menu, and then select Directory.
2.Press
or
to highlight the desired entry.
3.Press the Options soft key, and then select Edit.
4.Edit the value in the Name, Number, Mobile and Extension field respectively.
5.Press the Save soft key to accept the change.
To delete a contact:
1.Press the OK key to enter the main menu, and then select Directory.
2.Press
or
to highlight the desired entry.
3.Press the Options soft key, and then select Delete to delete the selected entry.
To assign a speed dial number:
1.Press the OK key to enter the main menu, and then select Settings->Telephony->
Speed Dial.
2.Press
or
to highlight the desired digit key, and then press the Assign soft key.
3.Press
to highlight the desired entry, and then press the OK soft key.
or
If both the office number and mobile number are stored, press
the desired number, and then press the OK soft key again.
or
to highlight
Basic Call Features
Placing Calls
To place a call directly:
1.Do one of the following:
Enter the desired number when the handset is idle.
Press
to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the desired line. If you do not select a line, the handset uses the
default outgoing line to dial out.
2.Press
or
to dial out.
To place a call from the local directory:
1.Press
when the handset is idle.
2.Press
or
to highlight the desired entry, and then press
or
to dial out
using the default line.
If multiple numbers for the contact are stored, press
or
to highlight the desired
number, and then press
or
again to dial out using the default line.
To place a call from the call history:
1.Press the History soft key when the handset is idle, and then select the desired call
history list.
2.Press
or
to highlight the desired entry, and then press
or
to dial out
using the default line.
To place a call from the redial list:
1.Press
2.Press
when the handset is idle.
or
to highlight the desired entry, and then press
or
To place a call using the speed dial key:
Long press the speed dial key to call the preset number directly.
Answering Calls
To answer a call, do one of the following:
Press the Accept soft key.
Press
Press
Press
Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing
Ending Calls
Press
Call Mute
Press
during a call to mute the call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Options soft key during a call, and then select Hold.
To resume a call, do one of the following:
If there is only a call on hold, press the Resume soft key.
If there are two calls on hold, press the Resume soft key to resume the current call.
Press the Swap soft key to swap between calls.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1.Press the Options soft key during a call, and then select Transfer.
2.Enter the number you want to transfer the call to.
3.Press the Transfer soft key.
Semi-Attended Transfer
1.Press the Options soft key during a call, and then select Transfer.
2.Enter the number you want to transfer the call to.
3.Press
or
to dial out.
4.Press the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1.Press the Options soft key during a call, and then select Transfer.
2.Enter the number you want to transfer the call to.
3.Press
or
to dial out.
4.Press the Transfer soft key after the call is answered.
Call Forward
To enable the call forward feature on a specific line:
1.Press the OK key to enter the main menu, and then select Call Features->Call
Forward.
2.Press
or
to highlight the desired line, and then press the OK soft key.
3.Press
key.
or
to highlight the desired forwarding type, and then press the OK soft
Always----Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the line is busy.
No Answer----Incoming calls are forwarded if not answered after a period of time.
4.Select Enabled from the Status field.
5.Enter the number you want to forward the incoming calls to in the Target field.
For No Answer Forward, press
or
to select the desired ring time to wait
before forwarding in the After Ring Time field.
6.Press the Save soft key to accept the change.
10
About Yealink
Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution
provider that primarily offers video conferencing systems and voice communication solutions.
Founded in 2001, Yealink leverages its independent research and development and innovation
to pursue its core mission: “Easy collaboration, high productivity.” The company’s high-quality
UC terminal solutions enhance the work efficiency and competitive advantages of its customers
in over 100 countries. Yealink is the world’s second-largest SIP phone provider and is number
one in the China market.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product
documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing
system (https://ticket.yealink.com) to submit all your technical issues.
W6 0 - E N
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: 309, 3th Floor, No.16, Yun Ding North Road, Huli
District, Xiamen City, Fujian, P.R. China
Copyright©2017 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : Yealink W60B & W56H Quick Start Guide_V81_1
Metadata Date                   : 2017:08:04 13:47:05+08:00
Modify Date                     : 2017:08:04 13:47:05+08:00
Create Date                     : 2017:08:04 13:47:05+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 112
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 3352 bytes, use -b option to extract)
Instance ID                     : uuid:4d9df587-707a-419a-b584-89980ff52595
Document ID                     : xmp.did:225FD74DD878E7118925FA7FBBA7CDA1
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:215FD74DD878E7118925FA7FBBA7CDA1
Derived From Document ID        : xmp.did:215FD74DD878E7118925FA7FBBA7CDA1
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:CD557C15D4DCE411BF87E64847A10383, xmp.iid:225FD74DD878E7118925FA7FBBA7CDA1
History When                    : 2015:04:07 13:45:32+08:00, 2017:08:04 13:47:01+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 9.499989
Max Page Size H                 : 14.000007
Max Page Size Unit              : Centimeters
Font Name                       : 066-CAI978, 104-CAI978, MicrosoftPhagsPa, MicrosoftPhagsPa-Bold, ArialMT, Arial-BoldMT, 096-CAI978, AdobeGothicStd-Bold
Font Family                     : 066-CAI978, 104-CAI978, Microsoft PhagsPa, Microsoft PhagsPa, Arial, Arial, 096-CAI978, Adobe 고딕 Std
Font Face                       : Regular, Regular, Regular, Bold, Regular, Bold, Regular, B
Font Type                       : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 1.00 December 7, 1998, initial release, Version 1.00 January 3, 1999, initial release, Version 5.90, Version 5.90, Version 5.20, Version 5.20, Version 1.00 December 13, 1998, initial release, Version 1.006;PS 1.003;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : 066-CAI978.ttf, 104-CAI978.ttf, phagspa.ttf, phagspab.ttf, arial.ttf, arialbd.ttf, 096-CAI978.ttf, AdobeGothicStd-Bold.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 颜色组 1
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=63 M=68 Y=69 K=78
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 63.281298
Swatch Groups Colorants Magenta : 67.968798
Swatch Groups Colorants Yellow  : 69.140601
Swatch Groups Colorants Black   : 78.125000
Producer                        : Adobe PDF library 10.01
Page Count                      : 12
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools