Yaesu Musen 20335X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual Cover pmd
Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER Cover pmd
Contents
- 1. Operating Manual 1
- 2. Operating Manual
Operating Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1215303 |
| Application ID | Pj4Bcc+gfdJtope0cJGyLQ== |
| Document Description | Operating Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 336.8kB (4210054 bits) |
| Date Submitted | 2009-12-17 00:00:00 |
| Date Available | 2009-12-17 00:00:00 |
| Creation Date | 2009-12-17 10:51:16 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2009-12-17 10:53:25 |
| Document Title | Cover.pmd |
| Document Creator | PageMaker 7.0J |
| Document Author: | yohtaki |
FCC ID: K6620335X40 IC: 511B-20335X40 DUAL BAND FM TRANSCEIVER FTM-350R OPERATING MANUAL VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. YAESU UK LTD. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U.K. VERTEX STANDARD HK LTD. Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VERTEX STANDARD (AUSTRALIA) PTY., LTD. Normanby Business Park, Unit 14/45 Normanby Road Notting Hill 3168, Victoria, Australia FCC ID: K6620335X40 IC: 511B-20335X40 Contents FRONT PANEL CONTROLS & SWITCHES [FWD]/[BCK](PAGE) KEY FCC ID: K6620335X40 IC: 511B-20335X40 [B](BAND) KEY Press these keys briefly to select the operating function pages. The available pages are: “Radio” page, “Timer” page, “Baro/Alti” page, “Navigation” page , and “GPS Status” page . : Requires optional “FGPS-1” GPS Unit. Press and hold in these keys toggle the Dual Receive feature “on” and “off”. [PTT] KEY Press this key to transmit. [SET](SET MODE) KEY Press this key to change the operating band of the Main band. Available bands are: Left Band: AM Radio, FM Radio, 144 MHz Band, 430 MHz Band, and Audio Line-In Right Band: 144 MHz Band and 430 MHz band You may assign the other function to this key. See page 36. [F](FUNCTION) KEY Press this key to access the Set Mode. Press this key to change the current functions of the [SMART FUNCTION] keys. [DIAL] KNOB Rotate this knob to select the operating frequency (or memory channel) of the left side receiver. Press and hold this knob for one second to enable to tuning the VFO frequency in 1 MHz step. When the left side receiver is set to “Main” band, press this knob briefly to activates the Band Scorp feature. When the leftside receiver is set to “Sub” band, press this knob briefly to change the left side receiver to “Main” band. [DIAL] KNOB MICROPHONE [VOL] KNOB Adjusts the left side receiver’s audio volume. [SMART FUNCTION] KEY These four keys select many of the most important operating features of the transceiver. When changing the operating function page or pressing the [FUNCTION] key, the current function of these key will change and appear above each keys. FTM-350R OPERATING MANUAL [VOL] KNOB Adjusts the right side receiver’s audio volume. [POWER] SWICTH Rotate this knob to select the operating frequency (or memory channel) of the right side receiver. Press and hold this knob for one second to enable to tuning the VFO frequency in 1 MHz step. When the right side receiver is set to “Main” band, press this knob briefly to activates the Band Scorp feature. When the right side receiver is set to “Sub” band, press this knob briefly to change the right side receiver to “Main” band. Press and hold this key for two seconds to toggle the transceiver’s power on and off. Press this key briefly while the transceiver is turned on to toggle the key lockout feature on or off. FCC ID: K6620335X40 IC: 511B-20335X40 TIMER PAGE OPERATION “CLOCK” “COUNT UP” TIMER 24 35 “COUNT DOWN” TIMER 24 35 1 Press the [FWD ] or [BCK] key repeatedly, until the 1 Press the [FWD ] or [BCK ] key repeatedly, until the 1 Press the [FWD ] or [BCK] key repeatedly, until the “Timer Page” appears. 2 Press the [MODE] key repeatedly, until the “Clock” appears. “Timer Page” appears. Press the [MODE] key repeatedly, until the “Count Up” timer appears. The “Count Up” timer has two kinds: which is with Lap function and without Lap function. Press the [SETUP] key to set the interval time of the timer beep: rotate the [DIAL] knob to select the interval time, then press the [SETUP] key. Press the [START] key to initiate the “Count Up” timer. Press the [LAP] key to save the lap time, if desired (up to four laps). Press the [STOP] key to stop the “Count Up” timer. Press and hold the [START] key for two seconds to reset the “Count Up” timer. “Timer Page” appears. Press the [MODE] key repeatedly, until the “Count Down” timer appears. The “Count Down” timer has two kinds: which is with Lap function and without Lap function. Press the [SETUP] key to set the setup time: rotate the [DIAL ] knob to select the setup time, then press the [SETUP] key. Press the [START] key to initiate the “Count Down” timer. Press the [LAP] key to save the lap time, if desired (up to four laps). Press the [STOP] key to stop the “Count Down” timer. Press and hold the [START] key for two seconds to reset the “Count Down” timer. To return to the “Radio” page, press the [FWD] or [BCK] key repeatedly, until the “Radio” Page appears. The FTM-350’s clock is setup from the Set mode item “I01 DATA&TIME ADJUST” in the “TIMER/CLOCK” group. See page 39 for details. To return to the “Radio” page, press the [FWD] or [BCK] key repeatedly, until the “Radio” Page appears. To return to the “Radio” page, press the [FWD] or [BCK] key repeatedly, until the “Radio” Page appears. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 RADIO PAGE BASIC OPERATION BASIC OPERATION You can do the basic operation in numerical order of the illustration below. 31 MICROPHONE 1 Press and hold the [POWER] key for two seconds to turn the transceiver on. 2 Rotates the [VOL] knob to adjust the audio volume level. 3 Adjusts the squelch throshold level: rotates the [DIAL] knob after pressing the [SQL] key. Press the [DIAL] knob briefly to set the “Main” band. Press the [B] key to select the operating band of the “Main” band. Rotate the [DIAL] knob to select the operating frequency. Speak into the microphone in a normal voice level while pressing the [PTT] key. Press and hold the [POWER] key for two seconds to turn the transceiver off. FTM-350R OPERATING MANUAL [SMART FUNCTION] KEY FCC ID: K6620335X40 IC: 511B-20335X40 GENERAL The radio operation of the FTM-350 performs by changing the [SMART FUNCTION] key into various functions by pushing the [F] key. [SMART FUNCTION] key [FUNCTION] key The function command of the [SMART FUNCTION] key replace as follows by pressing the [F] key. Recall the desired function you want to operate, and perform it. Default F-1 F-2 V/M SCAN SQL DW LOCK LOCK REV SKIP 1 POW AF-D 2 REV SKIP 1 XPLAY POW AF-D 2 VOICE When install the optional Voice Guide Unit. F-1 F-2 F-3 V/M SCAN zREC SQL DW X CLR LOCK LOCK LOCK When install the optional Voice Guide Unit and GPS Antenna Unit. F-1 F-2 F-3 F-4 V/M SCAN SyLIST zREC SQL DW MSG X CLR LOCK LOCK LOCK LOCK REV SKIP 1 BCOM XPLAY POW AF-D 2 B-TX VOICE When press and hold the [F] key for two seconds. SQL TYPE TyFRQ LOCK DyCOD PyFRQ 1: The [SKIP] command is appeared only in memory mode. 2: You may change the [AF-D] command to other command by Set Mode item “G05 F KEY”. See page ???. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 [SMART FUNCTION] KEY [SMART FUNCTION] KEY COMMAND DETAILS V/M SQL F-1 LOCK REV POW SCAN DW F-2 LOCK SKIP AF-D SyLIST MSG F-3 LOCK BCOM B-TX zREC X CLR F-4 LOCK XPLAY VOICE Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Switches frequency control betwenn the “VFO” and “Memory System”. Activates the “Memory Write” mode (for memory channel strage). Activates the Squelch threshold level. No Action. Toggle the key lockout feature “on and “off”. Toggle the transceiver’s power “on and “off”. Reverse transmit and receive frequencies while working through a repeater. No Action. Selects the desired transmit power output level (“LOW”, “MID”, and “HIGH”) No Action Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Activates the Scanner. No Action. Activates the Dual Watch feature. No Action. Toggle the key lockout feature “on and “off”. Toggle the transceiver’s power “on and “off”. Selects the “scan flag” to the current memory channel. No Action. Activates the AF Dual function. No Action. Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Initiates the recording of the incoming receiver audio. No Action. Clears the recording data. No Action. Toggle the key lockout feature “on and “off”. Toggle the transceiver’s power “on and “off”. Play back the recording data. No Action. Announces the operating frequency of the “Main” band. No Action. Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Press Key Press & Hold Key Initiates the recording of the incoming receiver audio. No Action. Clears the recording data. No Action. Toggle the key lockout feature “on and “off”. Toggle the transceiver’s power “on and “off”. Play back the recording data. Selects the Voice Memory Register (slot 1 - 8, or ALL). Announces the operating frequency of the “Main” band. No Action. Press Key Press & Hold Key Press Key TyFRQ Press & Hold Key Press Key SQL LOCK Press & Hold Key Press Key DyCOD Press & Hold Key Press Key PyFRQ Press & Hold Key TYPE Selects the Tone Squelch type. No Action. Selects the CTCSS Tone frequency. No Action. Toggle the key lockout feature “on and “off”. Toggle the transceiver’s power “on and “off”. Selects the DCS code. No Action. Selects the User Programmed Reverse CTCSS Tone frequency.. No Action. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 MEMORY OPERATION MEMORY STORAGE Before beginning the Memory Storage operation, select the desired frequncy while operating in the VFO mode by the “Main” band. Be sure to set up any desired CTCSS or DCS tones, as well as any desired pereater offset. The power level may also be set at this time, if you wish to store it. 12 22 1 Press and hold in the [V/M] key for two seconds to appear the “Memory Edit” window. 2 If you wish to append an Alpha/numeric “Tag” to this channel, press and hold the [V/M] key again, then enter the desired name “Tag” (up to 8 character) by following examples. Otherwise, skip to the next step. Example 1: Press the one of the microphone’s keypad. Press the [A] / [B] key to move the cursor, and press the [C] key to delete all data after the cursor. You may change the character (capital alphabet, small alphabet, numeric, and symbol) by pressing the [ ] key. Example 2: Rotate the left side [DIAL] knob to select character/number and press the [] key to move the cursor to the next digit. Press the [BS] key to backspace the cursor. You may change the character (capital alphabet, small alphabet, numeric, and symbol) by pressing the [FONT] key. 3 Press the the [V/M] key to store the frequency into memory. Impotant Note On rare occasions the memorized data may become corrupted by miss operation, or static electricity. When repairs are made the memory data may be lost. Please write down or record the memorized information so you will be able to restore it if needed. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 MEMORY OPERATION STORING INDEPENDENT TRANSMIT FREQUNCY (“ODD SPLIT”) All memories can store an independent transmit frequncy, for operation on repeaters with non-standard shift. Before beginning this procedures, store the receive frequency using the method already described on the previous page. 13 1 Tune the desired transmit frequncy on the “Main” band, then press and hold in the [V/M] key for two seconds. 2 Rotate the left side [DIAL] knob to select the same memory channel number as used in step 1 above. 3 Press the [TXIN] key to store the independent transmit frequncy into memory. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 MEMORY OPERATION MEMORY RECALL 1 Press the [V/M] key, the “Main” band becomes to the memory mode. 2 Rotate the [DIAL] knob to select the select the desired memory channel. 3 To return to the VFO mode, press the the [V/M] key. When the radio is already set to memory mode, you may recall the memory of the “Main” band by the microphone’s keypad. For example, to recall the memory channel #14, press [0] Æ [1] Æ [4]. When recall the “Odd Splits” memory channel, the “ ” indication will appear in the display. When recall the “Tagged” memory channel, displays the memory channel with a Alpha/numeric “Tag”, and small frequency indication is appeared on the “Tag” indication. You may exchange the relationship between “Tag” indication and “Frequency” indication via Set Mode item “D018 MEMORY DISPLAY” in the “MEMORY” group. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 MEMORY OPERATION MEMORY EDIT You may edit the memory channel via the Set Mode item “D02 MEMORY EDIIT” in the “MEMORY” group. LABELING MEMORIES 1. Rotate the left side [DIAL] knob to select the memory channel on which you wish to append a label or change a label. 2. Press the [V/M] key for two seconds. Append or change a label by the same manner as the step 2 of the “Memory Storage” procedures (see page 6). COPYING MEMORIES 1. Rotate the left side [DIAL] knob to select the memory channel on which you wish to copy. 2. Press the [SEL] key. The selected colum will blink. 3. Rotate the left side [DIAL] knob to select the memory channel on which you wish to store the data. 4. Press the [CPY] key to copy the memory channel data. 5. Press the [SEL] key to stop the blinking colum. DELETING MEMORIES 1. Rotate the left side [DIAL] knob to select the memory channel on which you wish to delete. 2. Press the [SEL] key. The selected colum will blink. 3. Press the [DEL] key to delete the memory channel data. FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 MEMORY OPERATION MEMORY CHANNEL SORT You may sort and renumber the memory channels by frequency, from low to high via the “Special Function” mode. 1. Turn the radio off. 2. Turn the radio on while press and holding the key which is located at the left of the [POWER] switch to enter the “Special Function” mode. 3. When sort the memory channels in the left band, rotate the left side [DIAL] knob to select the function menu item “3 L-MEMORY SORT”. When sort the memory channels in the right band, rotate the left side [DIAL] knob to select the function menu item “4 R-MEMORY SORT”. 4. Press the left side [DIAL] knob, to display the confirmation message “OK? [SET]” on the display. If you decide to channel the memory channel sort, press the [ESC] key. 5. Press the left side [DIAL] knob again. Several seconds after pressing the left side [DIAL] knob, the FTM-350 is reset automatically and sorting is complete. 10 FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 AF DUAL OPERATION The AF Dual function allows you to monitor your desired amateur band frequencies while listening to an FM broadcast stations. 1 Press the [F] key repeatedly, until the [SMART FUNCTION] key’s category replaces to “F-2” mode. 2 Press the [AD-F] key to activate the AF Dual function. The left side receiver switches to FM Broadcast. You may monitor the right side receiver frequency while receiving the FM Broadcast station. Rotate the left side [DIAL] knob to tune the desired FM broadcast stations. If you want to change the audio source to AM Broadcast station or Line-In audio, press and hold the [AD-F] key for two seconds to access the Set Mode, select the desired audio sorce by rorating the left side [DIAL] knob and then press the [ESC] key. When a signal is received in the amateur band, the amateur band audio is output to the speaker. The FM or AM broadcast station will no longer be heard. When the right side receiver is set in the amateur band by “Main” band, you may transmit on the amateur band by pressing the [PTT] key. Press the [AD-F] key to disable the AF Dual function and return to normal operation. FTM-350R OPERATING MANUAL 11 FCC ID: K6620335X40 IC: 511B-20335X40 BAND SCOPE OPERATION GENERAL The Band Scope allows viewing operating activity on channel above or below the current operating channel in the VFO mode. 23 1 Press the “Main” band’s [DIAL] knob to activate the Band Scope. 2 Press the [BW] key to toggle the visible bandwidth to “±22 channels” and “±50 channels”. 3 Press the [ATT] key to reduce the receiving signal to approximately 10 dB, if desired (except the AM and FM Broadcast bands). 4 Press the [STOP] key to step the sweep of the Band Scope temporily, if desired. Press the [START] key to start the sweep of the Band Scope again. 5 Press the “main” band’s [DIAL] knob to disable the Band Scope and return to normal operation. 12 FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 BAND SCOPE OPERATION ENHANCED MODE You may perform the enhanced band scope operation while mono-band operation, when expand the function of the Band Scope by the “Special Function” mode. 34 Rotate the “Main” band’s [DIAL] knob to tune the operating frequency. Rotate the “Sub” band’s [DIAL] knob to move the cursor (S). Press the [C=CSR] key to return the cursor to band center. Press the [SCSR] key, replace the “S” cursor to “U”. In this case, you may tune the operating frequency with the cursor together by rotating the “Sub” band’s [DIAL] knob. 5 Press the [C=CSR] key to return the current frequency and cursor to both band center, and replace the “U” cursor to “S”. Switching to the Enhanced Mode 1. Turn the radio off. 2. Turn the radio on while press and holding the key which is located at the left of the [POWER] switch to enter the “Special Function” mode. 3. Rotate the left side [DIAL] knob to select the function menu item “8 BAND SCOPE”. 4. Press the left side [DIAL] knob, then rotate the left side [DIAL] knob to select “SPECIAL”. 5. Press the left side [DIAL] knob to save the new setting. 6. Press the [ESC] key, the FTM-350R is reset automatically. FTM-350R OPERATING MANUAL 13 FCC ID: K6620335X40 IC: 511B-20335X40 CTCSS/DCS/EPCS OPERATION CTCSS OPERATION 1. Press and hold in the [F] key for two seconds to replaces the [SMART FUNCTION] key’s category to “SQL”. 2. Press the [TYPE] key repeatedly, until the “TONE SQL” notation appears; this activates the CTCSS operation. 3. Press the [TyFRQ] key, then rotate the “Main” band’s [DIAL] knob to select the desired CTCSS frequency. 4. Press the [ESC] key to save the new setting and exit to normal operation. 5. To finish the CTCSS operation, press the [TYPE] key repeatedly, until the “OFF” notation appears. You may customize the CTCSS operation so that a ringing “bell” sounds alerts you taht a call is coming in via Set Mode item “J01 BELL RINGER” in the “SIGNALING” group. See page 40 for details. DCS OPERATION 1. Press and hold in the [F] key for two seconds to replaces the [SMART FUNCTION] key’s category to “SQL”. 2. Press the [TYPE] key repeatedly, until the “DCS” notation appears; this activates the DCS operation. 3. Press the [DyCOD] key, then rotate the “Main” band’s [DIAL] knob to select the desired DCS code. 4. Press the [ESC] key to save the new setting and exit to normal operation. 5. To finish the DCS operation, press the [TYPE] key repeatedly, until the “OFF” notation appears. You may customize the DCS operation so that a ringing “bell” sounds alerts you taht a call is coming in via Set Mode item “J01 BELL RINGER” in the “SIGNALING” group. See page 40 for details. 14 FTM-350R OPERATING MANUAL FCC ID: K6620335X40 IC: 511B-20335X40 CTCSS/DCS/EPCS OPERATION EPCS OPERATION The EPCS (Enhanced Paging & Code Squelch) feature allows you to place a call to a specific station (Paging), and to receive calls of your choice directed only to you (Code Squelch). The EPCS feature use two pairs of (alternately switched) CTCSS tones which are stored in the pager memories. Basically, your receiver remains silent until it receives the CTCSS tone pair that matches those stored in the receiving pager memory. 1. Store the CTCSS tone pair via Set Mode item “J04 PAGER CODE” in the “SIGNALING” group. Sub menu “1: RX” sets the first tone of the receiving CTCSS tone pair, and the second tone of the receiving CTCSS tone pair is set to Sub menu “2: RX”. In a similar manner, set the transmitting CTCSS tone pair in the Sub menu “3: RX” and “4: RX”. 2. Press and hold in the [F] key for two seconds to replaces the [SMART FUNCTION] key’s category to “SQL”. 3. Press the [TYPE] key repeatedly, until the “PAGER” notation appears; this activates the EPCS feature. 4. To finish the EPCS operation, press the [TYPE] key repeatedly, until the “OFF” notation appears. You may customize the EPCS operation so that a ringing “bell” sounds alerts you taht a call is coming in via Set Mode item “J01 BELL RINGER” in the “SIGNALING” group. See page 40 for details. FTM-350R OPERATING MANUAL 15 FCC ID: K6620335X40 IC: 511B-20335X40 SCAN OPERATION VFO SCAN 1. Press the [F] key repeatedly until the [SMART FUNCTION] key’s category replaces to “F-1”, then set the “Main” band to VFO mode by pressing the [V/M] key on the “F1” category, if necessary. 2. Press the [F] key briefly to change the [SMART FUNCTION] key’s category to “F2”. 3. Press the [SCAN] key on the “F-2” category to initiate the VFO scan. 3. Press the [SCAN] key again to stop the VFO scan. You may customize the functions of the VFO Scan via following Set Mode items “F02 SCAN DIRECTION”, “F03 SCAN RESUME”, “F04 SCAN STOP BEEP” in the “SCAN” group, and “G08 RX COVERAGE” in the “SYSTEM” group. MEMORY SCAN 1. Press the [F] key repeatedly until the [SMART FUNCTION] key’s category replaces to “F-1”, then set the “Main” band to memory mode by pressing the [V/M] key on the “F-1” category, if necessary. 2. Press the [F] key briefly to change the [SMART FUNCTION] key’s category to “F2”. 3. Press the [SCAN] key on the “F-2” category to initiate the memory scan. 4. Press the [SCAN] key again to stop the memory scan. You may customize the functions of the Memory Scan via Set Mode items “D03 MEMORY SCAN TYEP” in the “MEMORY” group, “F04 MEMORY SKIP/SELCT”, “F03 SCAN RESUME”, “F04 SCAN STOP BEEP” in the “SCAN” group, and “G08 RX COVERAGE” in the “SYSTEM” group. 16 FTM-350R OPERATING MANUAL
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2009:12:17 10:53:25-05:00 Create Date : 2009:12:17 10:51:16-05:00 Metadata Date : 2009:12:17 10:53:25-05:00 Creator Tool : PageMaker 7.0J Format : application/pdf Title : Cover.pmd Creator : yohtaki Document ID : uuid:d70557d3-8b34-4be7-b078-7cc6e4c2abcb Instance ID : uuid:12109aa6-9461-4747-b5f1-c6e4ee0e7d02 Producer : Acrobat Distiller 7.0.5 (Windows) Has XFA : No Page Count : 18 Author : yohtakiEXIF Metadata provided by EXIF.tools