Yaesu Musen 20515X20 HH AMATEUR SCANNING RECEIVER User Manual OM
Yaesu Musen Co., Ltd. HH AMATEUR SCANNING RECEIVER OM
Contents
- 1. Operating Manual 1
- 2. Operating Manual 2
- 3. Operating Manual 3
- 4. Operating Manual 4
Operating Manual 2
Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Accessories & Options Supplied Accessories r SBR-24LI 7.4 V, 1800 mAh Lithium-Ion Battery Pack r SAD-11C/F/U*1 Battery Charger SAD-18B*2 Battery Charger r Antenna r Belt Clip r USB cable r Operating Manual (this manual) r Quick Manual r Warranty Card zz Ensure that the name of the dealer from which you purchased the transceiver and the date of purchase are indicated on the warranty card. zz If any item is missing, contact the dealer from which you purchased the transceiver. Available Options r SBR-24LI r SAD-11C/F/U*1 SAD-18B*2 r SBH-28 r SDD-13 r E-DC-6 r MH-34B4B r SSM-57A r SSM-63A r CT-44 r CN-3 r SHC-27 r CT-27 7.4 V, 1800 mAh Lithium-Ion Battery Pack Battery Charger Battery Charger Rapid Charger DC Cable with Noise Filter and Cigarette-Lighter Plug DC Cable (USA/EXP market only) Speaker / Microphone Earpiece Microphone VOX Headset Microphone Adapter BNC-to-SMA Adapter(BNCJ-SMAP) Soft Case Cloning Cable *1 “B” suffix is for use with 120 VAC (Type-A plug), “C” suffix is for use with 230-240 VAC (Type-C plug), “F” suffix is for use with 220 VAC, “H” suffix is for use with 220-230 VAC (Australian plug), and “U” suffix is for use with 230 VAC (Type-BF plug). *2 USA Version Availability of accessories may vary. Some accessories are supplied as standard per local requirements, while others may be unavailable in some regions. Consult your Yaesu Dealer for details regarding these and any newly-available options. Connection of any accessory not approved by Yaesu, should it cause damage, may void the Limited Warranty on this apparatus. FT-70DR/FT-70DE Operating Manual Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Controls & Connections Transceiver ⑨ ① ② ⑩ ⑬ ⑭ ③ ④ ⑤ ⑥ ⑦ ⑪ ⑫ ⑮ ⑯ ⑧ ① Antenna Jack (SMA)* ② LCD (Liquid Crystal Display) The display shows current operating conditions. ③ [PTT] switch • Press and hold [PTT] switch to transmit, and release it to receive. • In the Set mode, press this switch to save the new setting and return to normal operation. ④ Microphone ⑤ [MONI/T.CALL] Switch USA/EXP version While [MONI/T.CALL] Switch is pressed: Squelch OFF European version While [MONI/T.CALL] Switch is pressed: T.CALL ⑥ [VOL] Switch Rotate the DIAL knob while pressing and holding this key to adjust the audio volume level. ⑦ [Power] (Lock) Switch • When the power is off, press and hold: Power on • When the power is on, press and hold: Power off • When the power is on, press : Engages and releases the key lock FT-70DR/FT-70DE Operating Manual Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Controls & Connections ⑧ Battery pack* ⑨ DIAL Knob • Rotate to change the frequency or select a memory channel. • Rotate to select the desired item for set mode. ⑩ MODE/STATUS Indicator Indicates the transmission/reception status with a two-color combination on the upper and lower portions of the Mode/Status indicator. Communication status Analog Audio Digital Audio Receiving Digital Data Receiving signals with unmatched tone frequency or DCS code Analog Audio Transmitting Digital Audio Digital Data Left portion Green Right portion Green Blue White Blink in blue Red Red Blue White ⑪ Speaker ⑫ Keypad The functions of the keys are described in detail on the next page. ⑬ Strap Hole ⑭ MIC/SP jack* Connect a speaker microphone or earpiece microphone to this jack. The waterproof protection cannot be attained when an external microphone is connected. Do not connect any microphone which is not specified by Yaesu. A failure can result. ⑮ DATA Jack* • Connect to the PC using a supplied USB cable. * For instruction to update the firmware, access YAESU website. ⑯ EXT DC IN Jack* •When charging the battery pack, connect the battery charger to this jack. • In the USA/EXP market, connect an external power supply adapter with a cigarette lighter plug (SDD-13) or an external power cable (E-DC-6) to this jack. Do not connect any battery charger which is not specified by Yaesu. A failure can result. *: When the included antenna and battery pack are installed and the MIC/SP jack, EXT DC IN jack, and DATA jack are securely covered with rubber caps, the FT-70DR/DE meets the waterproofing performance conforming to IP54 (See page 4). FT-70DR/FT-70DE Operating Manual Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Controls & Connections Key AMS Primary Function (PRESS Key) VFO or Memory Recall Third Function (Press and Hold) - Activates the AMS feature - Selects AMS Mode (AUTO/MANUAL/FM FIX/DN FIX/VW FIX) Activates the “Secondary”key function - Enters the Set mode. Selects the receive mode among MODE FM(AM), DN and VW Deactivates the “Secondary”key function Switches between the frequency display and memory tag display - - Reverses the transmit and receive frequencies while working through a repeater - Turns on/off the GM function Press and hold this key to erase all characters after the cursor - Selects the DG-ID or DP-ID BAND Moves operation to the next-highest frequency band Moves the cursor to the right Moves operation to the next-lowest frequency band - V/M Switches between the VFO mode and Memory Channel mode Press and hold [V/M] key to complete the Enables the Dual memory channel Watch function registration Number “1” Number “1” Selects the desired transmit power output level. - Number “2” Number “2”, or char- Starts the scanner acters “A”, “B”, or “C” upward (toward a higher frequency or a higher channel number) - Number “3” Number “3”, or char- Selects the DTMF acters “D”, “E”, or “F” mode. - Number “4” Number “4”, charac- Selects the frequenters “G”, “H”, or “I” cy steps - Number “5” Number “5”, charac- Activates the ters “J”, “K”, or “L” CTCSS or DCS operation - Recall the “HOME” HM/RV (favorite frequency) channel GM Inputting Memory Tag Secondary Function (PRESS [F] + Key) Moves the cursor to the left. Activates the “Memory Write” mode (for memory channel storage) FT-70DR/FT-70DE Operating Manual Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Controls & Connections Key Primary Function (PRESS Key) VFO or Memory Recall Third Function (Press and Hold) Number “6” Number “6”, or characters “M”, “N”, or “O” Number “7” Number “7”, or charP1*(Enters the Set acters “P”, “Q”, “R”, mode [13 DC VLT]) or “S” - Number “8” Number “8”, or char- P2*(Enters the acters “T”, “U”, or “V” Set mode [57 RX MOD]) - Number “9” Number “9”, or char- Selects the Memory acters “W”, “X”, “Y”, Scan “Skip” channel or “Z” or “Select” channel - Number “0” Number “0”, or sym- Selects the direction bols “(space)”, “-”, of the up link fre“/”, “?”, or “!” quency shift (either “–”, “+”, or “simplex”) during repeater operation. Press and hold this key will fix the digits after the cursor with zeros during frequency input. Inputting Memory Tag Secondary Function (PRESS [F] + Key) Selects the CTCSS Tone or DCS code - *: You can program the secondary function of the key to another function. FT-70DR/FT-70DE Operating Manual Application for FCC / IC FCC ID: K6620515X20, IC: 511B-20515X20 Controls & Connections Display Frquency / Memory Tag / Set Mode Item Memory Channel Number / HOME Channel Volume Bar Graph S Meter / PO Meter Icon Description of operation GM (Gropu Monitor) Feature Active :SKIP Scan Channel :Preferential Scan Channel (blink) Priority Channel Repeater Shift Direction :Tone Encoder Active :Tone Squelch Active :Tone Squelch Active PAGER Feature Active Displays battery condition :Full battery power :Enough battery power :Poor battery power. Charge battery :Charge battery immediately (blink) 10 FT-70DR/FT-70DE Operating Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : YAESU MUSEN CO., LTD. Create Date : 2016:11:21 18:40:21+09:00 Modify Date : 2016:11:21 18:42:39+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:11:21 18:42:39+09:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Title : OM Creator : YAESU MUSEN CO., LTD. Document ID : uuid:8c01e437-f988-465e-a9b8-d1e0c4fd9423 Instance ID : uuid:b22e23d9-4a89-4e90-9658-224937b8c5cf Producer : Adobe PDF Library 10.0.1 Page Count : 6EXIF Metadata provided by EXIF.tools