Yaesu Musen 30573X30 HANDHELD MARINE TRANSCEIVER User Manual 5

Download:
Mirror Download [FCC.gov]
Document ID	2360592
Application ID	FkOU7ipw6NQ5mFgqwc6d4Q==
Document Description	User Manual 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.3kB (1616279 bits)
Date Submitted	2014-08-17 00:00:00
Date Available	2014-10-01 00:00:00
Creation Date	2014-08-17 20:35:27
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-08-17 20:35:45
Document Title	User Manual 5
Document Creator	Adobe InDesign CS6 (Windows)

14.12 SUMMARY OF THE DSC SETUP MENU
Item
INDIVIDUAL DIR.
INDIVIDUAL REPLY
INDIVIDUAL ACK.
INDIVIDUAL RING
GROUP DIR.
POSITION REPLY
AUTO POS POLLING
AUTO POS INTERVAL
AUTO CH CHANGE
POS UNFIX WAIT
DSC BEEP
Page 96
Description
Sets addresses used for individual call
Selects a reply to individual call
Selects the message to be sent automatically as an individual call acknowledgement
Selects the ringing time when an individual
call or a position request
Sets addresses used for group call
Selects a reply to position request
Switches on and off of the AUTO POS
POLLING function
Sets the transmission interval of AUTO
POS POLLING signal
Selects the delay time to move to the
requested channel automatically after
receiving a distress call, All Ship call, or
group call
Sets the maximum wait time till obtaining
a position information when receiving a
distress call, POS Report call, or acknowledgement to POS request call
Switches on and off of the alarm sound
when receiving a DSC call
Default Value
−
MANUAL
ABLE TO COMPLY
2 min
−
AUTO
AUTO POS REQUEST
5 min
30 s
15 s
INDIVI.:
All Ship:
GROUP:
POS RQ.:
POS RP:
Geog.:
Polling:
Test Call:
On
On
On
Off
Off
On
On
On
HX870
15 GPS SETUP
The “GPS Setup” mode allows the parameters for the HX870 internal GPS unit
to be custom-configured for your operating requirements.
15.1 GPS ON/OFF
This selection allows the internal GPS unit to be turned on or off to conserve
battery power. The default setting is “ON”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
3. Press the [SELECT] soft key, then select
“GPS ON/OFF” with the CH▲/CH▼ key.
4. Press the [SELECT] soft key.
5. Press the CH▲/CH▼ key to select “ON”.
6. Press the [ENTER] soft key to save the new
setting.
7. Press the CLR key to return to radio operation.
GPS SETUP
ON
GPS ON/OFF
POWER SAVE
DIRECTION
LOCATION FORMAT
TIME OFFSET
TIME AREA
TIME FORMAT
BACK
SELECT
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
GPS SETUP
GPS ON/OFF
OFF
ON
INT at PWR OFF
BACK
ENTER
15.2 POWER SAVE
This menu item selects the Battery Save Mode for the internal GPS unit. The
default setting for the Power Save Mode is “AUTO”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
3. Press the [SELECT] soft key, then select
“POWER SAVE” with the CH▲/CH▼ key.
4. Press the [SELECT] soft key.
GPS SETUP
ON
GPS ON/OFF
POWER SAVE
DIRECTION
LOCATION FORMAT
TIME OFFSET
TIME AREA
TIME FORMAT
BACK
HX870
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
SELECT
Page 97
5. Press the CH▲/CH▼ key to select the
GPS SETUP
POWER SAVE
desired level.
OFF
50%
OFF: GPS Signals are always being
70%
80%
received.
90%
BACK
ENTER
AUTO: Activates the GPS receiver automatically when GPS signals are received.
50%: Activates the GPS receiver for 3 seconds every 3 seconds.
75%: Activates the GPS receiver for 3 seconds every 9 seconds.
90%: Activates the GPS receiver for 3 seconds every 27 seconds.
6. Press the [ENTER] soft key to store the selected setting.
7. Press the CLR key to return to radio operation.
15.3 LOCATION FORMAT
This menu item selects the coordinate system to be shown on the HX870
display. The default setting is “ddd mm.mmm”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
GPS SETUP
3. Press the [SELECT] soft key, then select
ON
GPS ON/OFF
“LOCATION FORMAT” with the CH▲/CH▼ POWER SAVE
DIRECTION
LOCATION FORMAT
key.
TIME OFFSET
AREA
4. Press the [SELECT] soft key, then press TIME
TIME FORMAT
BACK
SELECT
the CH▲/CH▼ key to select the desired
coordinate system. The location format can
be selected from “ddd’mm.ss”, “ddd’mm.mm”,
and “ddd’mm.mmm”.
5. Press the [ENTER] soft key to save the new setting.
6. Press the CLR key to return to radio operation.
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
GPS SETUP
LOCATION FORMAT
ddd°
mm.mmm
ddd°
mm.mm
ddd°
mm.ss
BACK
ENTER
15.4 TIME OFFSET
Sets the local time offset between UTC (Universal Time Coordinated) and local
time shown on the display. The offset is added or subtracted from the time
received from the GPS or chart plotter. Time is only displayed when a GPS or
chart plotter is connected.
Refer to section “6.4 CHANGING THE GPS TIME” for details.
Page 98
HX870
15.5 TIME AREA
This menu selection allows the radio to show UTC time or local time with the
offset.
Refer to section “6.5 CHANGING THE TIME LOCATION” for details.
15.6 TIME FORMAT
This menu selection allows the radio to show time in 12-hour or 24-hour format.
Refer to section “6.6 CHANGING THE TIME FORMAT” for details.
15.7 UNIT OF MEASURE
This section allows you to set the speed, distance and altitude units.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
GPS SETUP
3. Press the [SELECT] soft key, then press
POWER SAVE
the CH▲/CH▼ key to select “UNIT OF DIRECTION
LOCATION FORMAT
TIME OFFSET
MEASURE”.
TIME AREA
TIME FORMAT
4. Press the [SELECT] soft key.
UNITS OF MEASURE
BACK
SELECT
5. Press the CH▲/CH▼ key to select the item
you want to set.
6. Press the [SELECT] soft key.
7. Press the CH▲/CH▼ key to select the unit.
8. Press the [ENTER] soft key to store the new setting.
9. Press the CLR key to return to radio operation.
HX870
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
GPS SETUP
UNITS OF MEASURE
kts
SPEED
DISTANCE
nm
ALTITUDE
ft
BACK
SELECT
Page 99
15.8 PINNING
This selection is used to enable or disable position updates when the vessel
is not underway. The default setting is “OFF”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
SETUP
DSC SETUP
2. Press the CH▲/CH▼ key to select “GPS
GM SETUP
SETUP” menu.
WAYPOINT SETUP
CH SETUP
GPS SETUP
3. Press the [SELECT] soft key, then select
GPS SETUP
UNITS OF MEASURE
ATIS SETUP
ON
PINNING
“PINNING” with the CH▲/CH▼ key.
BACK
SELECT
POSITION INPUT
ON
D-GPS
4. Press the [SELECT] soft key.
OUTPUT SENTENCES
GPS SETUP
INTERVAL
PINNING
5. Press the CH▲/CH▼ key to select “ON” or LOGGER
LOG ERASE
OFF
BACK
SELECT
“OFF”.
ON
ON: When pinning is turned on, the HX870
will not update its position unless the
BACK
ENTER
vessel travels over 10Ft.
OFF: When the vessel is underway or stopped, the HX870 continuously
updates its position (unless transmitting). This improves accuracy of
the position fix.
6. Press the [ENTER] soft key to save the new setting.
7. Press the CLR key to return to radio operation.
15.9 SBAS (Satellite Based Augmentation System)
This selection enables or disables SBAS such as WAAS, EGNOS and MSAS
as some areas (Australia for example) can have problems with GPS reception
with SBAS enabled. The default setting is “ON”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
3. Press the [SELECT] soft key, then press the
CH▲/CH▼ key to select “D-GSP”.
4. Press the [SELECT] soft key.
5. Press the CH▲/CH▼ key to select “ON” or
“OFF”.
6. Press the [ENTER] soft key to store the new
setting.
7. Press the CLR key to return to radio operation.
Page 100
GPS SETUP
UNITS OF MEASURE
ON
PINNING
POSITION INPUT
ON
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
BACK
SELECT
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
GPS SETUP
D-GPS
OFF
ON
BACK
ENTER
HX870
15.10 OUTPUT SENTENCES
This selection is used to setup the NMEA output sentences of the HX870.
By default, all the NMEA sentences are turned “OFF”.
1. Press the MENU key to display “MENU”, then
select “SETUP” with the CH▲/CH▼/◄/►
key.
2. Press the CH▲/CH▼ key to select “GPS
SETUP” menu.
GPS SETUP
3. Press the [SELECT] soft key, then select
UNITS OF MEASURE
ON
PINNING
“OUTPUT SENTENCES” with the CH▲/CH▼
POSITION INPUT
ON
D-GPS
key.
OUTPUT SENTENCES
LOGGER INTERVAL
4. Press the [SELECT] soft key.
LOG ERASE
BACK
SELECT
5. Press the CH▲/CH▼ key to select the
desired sentence type, then press the
[ENTER] soft key.
6. Press the CH▲/CH▼ key to select “ON” or
“OFF”.
7. Press the [ENTER] soft key to save the new
setting.
8. Repeat steps 5 through 7 to set the other sentences.
9. Press the CLR key to return to radio operation.
SETUP
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
ATIS SETUP
BACK
SELECT
GPS SETUP
OUTPUT SENTENCES
ON
GLL
GGA
GSA
GSV
ON
RMC
BACK
ENTER
15.11 LOGGER INTERVAL
1. Press the MENU key to display “MENU”, then select “SETUP”
with the CH▲/CH▼/◄/► key.
2. Press the CH▲/CH▼ key to select “GPS SETUP” menu.
3. Press the [SELECT] soft key, then select “LOGGER INTERVAL” with the CH▲/CH▼ key.
4. Press the CH▲/CH▼ key to select the desired time and
press the [ENTER] soft key.
5. Press the CLR key to return to radio operation.
Log time for each logger interval setting
5 sec: Aprox. 8 hours
15 sec: Aprox. 25 hours
30 sec: Aprox. 50 hours
1 min: Aprox. 100 hours
5 min: Aprox. 500 hours
HX870
GPS SETUP
UNITS OF MEASURE
ON
PINNING
POSITION INPUT
ON
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
BACK
SELECT
GPS SETUP
LOGGER INTERVAL
5sec
15sec
30sec
1min
5min
BACK
ENTER
Page 101
15.12 LOG ERASE
1. Press the MENU key to display “MENU”, then select “SETUP”
with the CH▲/CH▼/◄/► key.
2. Press the CH▲/CH▼ key to select “GPS SETUP” menu.
3. Press the [SELECT] soft key, then select “LOGGER ERASE”
with the CH▲/CH▼ key.
4. Select “CANCEL” or “OK” on the confirmation screen, then
press the [ENTER] soft key.
5. Press the CLR key to return to radio operation.
GPS SETUP
UNITS OF MEASURE
ON
PINNING
POSITION INPUT
ON
D-GPS
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
BACK
SELECT
GPS SETUP
LOG ERASE
CANCEL
OK
BACK
15.13 SUMMARY OF THE GPS SETUP
Item
UNIT POWER
POWER SAVE
LOCATION FORMAT
TIME OFFSET
TIME AREA
TIME FORMAT
UNIT OF MEASURE
PINNING
D-GPS
OUTPUT
SENTENCES
LOGGER INTERVAL
LOG ERASE
Page 102
Description
Switches on and off of the GPS unit power
Selects the power save mode of the GPS
unit
Selects the coordinate system to be
displayed
Sets the offset time from the UTC (available only when “LOCAL” is selected in the
item “TIME AREA”)
Selects the time location to be displayed
from UTC or local
Selects the time format from 12-hour or
24-hour display (fixed to “24H” when “UTC”
is selected in the item “TIME AREA”)
Selects the unit when displaying speed,
distance, and altitude
Switches on and off of position updates for
vessel not underway
Switched on and off of use of SBAS
Selects a sentence to be output to the
USB terminal
Selects the interval time of logging
Erases the log data
ENTER
Default Value
ON
AUTO
dd mm.mmm
00:00
UCT
24H
SPEED:
kts
DISTANCE: nm
ALTITUDE: ft
OFF
ON
OFF
1 min
−
HX870
16 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.
•
•
•
Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
Ensure that the supply voltage to the transceiver does not exceed 8.5 VDC
or fall below 6 VDC.
Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility. Address and phone numbers for this facility, as well as warranty
information, are contained in section “18 WARRANTY”.
16.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by emailing
yaesuparts@yaesu.com or calling:
Marine Division of YAESU U.S.A.
6125 Phyllis Drive, Cypress, California 90630
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
• SBH-12 Charger Cradle: XXX
• CAT460 Antenna: AY139X001
• Belt Clip (CLIP-22): XXX
• MIC/SP Plastic Cap: RA108700B
• MIC/SP Cap O-Ring: RA046760A
• MIC/SP Rubber: RA1555900
HX870
Page 103
16.2 FACTORY SERVICE
In the unlikely event that the radio fails to perform or needs servicing, please
contact the following:
Standard Horizon
Attention Marine Repair Department
6125 Phyllis Drive, Cypress, California 90630, U.S.A.
Telephone (800) 366-4566
For repairs in Canada
Westcom Marine
488 East 62nd Avenue Vancouver BC V5X2G1
Telephone (604) 327-6280
An “RA” (Return Authorization) number is not necessary to send a product in
for service. Include a brief note describing the problem along with your name,
return address, phone number, and proof of purchase.
16.3 TROUBLESHOOTING CHART
SYMPTOM
PROBABLE CAUSE
REMEDY
The USA/INTL/CAN
modes do not function.
Proper operation not
followed.
Cannot output sound by
pressing and holding the
SQL key.
Low battery.
Specify the item number from
“SETUP MENU” – “CH SETUP” – “CH
GROUP”.
Charge battery. Refer to section 6
of this manual.
Press the VOL+ key until background noise outputs.
Press and hold the       key to unlock.
Program the MMSI number. Refer
to section “9.2.2 Programming
the MMSI”.
Internal GPS receiver is “on”. Refer
to “14.1 GPS ON/OFF”.
Move to a less obstructed position.
Keys do not function.
Cannot transmit a DSC
Call.
Cannot fix the GPS satellites.
Indicator does not light
when charging a battery.
Page 104
Audio volume level is too
low.
Key Lock is “on”.
MMSI number is not
programmed.
Internal GPS receiver is
“off”.
Poor location for GPS
satellite reception.
Defective battery SBR13LI.
The transceiver is not set
onto the SBH-12 Charger
Cradle properly.
Power is not supplied
to the SBH-12 Charger
Cradle.
Contact Standard Horizon dealer.
Set the transceiver onto the SBH-12
Charger Cradle properly.
Connect SAD-11B or E-DC-19A to
the SBH-12 Charger Cradle for AC/
DC power supplies.
HX870
17 CHANNEL ASSIGNMENTS
Tables on the following columns list the VHF Marine Channel assignments for
U.S.A. and International use. Below are listed some data about the charts.
1. VTS. Where indicated, these channels are part of the U.S. Coast Guard’s
Vessel Traffic System.
2. Alpha channel numbers, that is, channel numbers followed by the letter A
(such as Channel 07A) are simplex channels on the U.S.A. or Canadian
channel assignments whose counterparts in the International assignments
are duplex channels. International channels do not use “alpha” numbers. If
you call the Coast Guard on Channel 16, they will sometimes ask you to “go
to channel 22 Alpha”. This is a channel assigned to U.S.A, and Canadian
Coast Guards for handling distress and other calls. If your radio is set for
International operation you will go to Channel 22 instead of 22A, and will
not be able to communicate with the Coast Guard. To use Channel 22A,
your radio must be set for USA or Canada operation, usually by a U/I/C
(USA/International/Canada) control or combination of controls. Channel
22 (without an “A”) is an International duplex channel for port operations.
Some radios indicate an “A” adjacent to the alpha channels on the display;
on others “alpha” is not indicated but the proper channel is selected based
on the U/I/C setting.
3. Bridge-to-Bridge channels (for example, Channel 13) are for use by bridge
operators on inter-coastal waterways and rivers. It is also used by marine
vessels in the vicinity of these bridges for navigation and for communicating
with the bridge operators. Note that a limit of 1 Watt is specified for these
channels.
4. The S/D column on the chart indicates either S (simplex) or D (duplex).
Simplex means transmitting and receiving on the same frequency. Only
one party at a time can talk, unlike a telephone. Be sure to say “over” and
release your microphone push-to-talk switch at the end of each transmission. Duplex operation involves the use of one frequency for transmitting
and a separate frequency for receiving. On channels specified as duplex on
the charts, correct mode of operation is established automatically by your
radio when you select a channel; you cannot change the mode. And you
still must release the push-to-talk switch after each transmission in order
to listen to the radio.
5. Channels normally used by recreational boaters are those that include the
term “non-commercial” in the Channel Use column of the chart. Some
of these are shared with other users and some are used only in certain
geographic regions.
HX870
Page 105
6. Marine vessels equipped with VHF radios are required to monitor Channel
16.
7. 156.050 MHz and 156.175 MHz are available for port operations and
commercial communications purposes when used only within the U.S. Coast
Guard designated Vessel Traffic Services (VTS) area of New Orleans, on
the lower Mississippi River from the various pass entrances in the Gulf of
Mexico to Devil’s Swamp Light at River Mile 242.4 above head of passes
near Baton Rouge.
8. 156.250 MHz is available for port operations communications use only
within the U.S. Coast Guard designated VTS radio protection areas of New
Orleans and Houston described in Sec. 80.383. 156.250 MHz is available
for intership port operations communications used only within the area of
Los Angeles and Long Beach harbors, within a 25- nautical mile radius of
Point Fermin, California.
9. 156.550 MHz, 156.600 MHz and 156.700 MHz are available in the U.S.
Coast Guard designated port areas only for VTS communications and
in the Great Lakes available primarily for communications relating to the
movement of ships in sectors designated by the St. Lawrence Seaway
Development Corporation or the U.S. Coast Guard. The use of these
frequencies outside VTS and ship movement sector protected areas is
permitted provided they cause no interference to VTS and ship movement
communications in their respective designated sectors.
10. Use of 156.875 MHz is limited to communications with pilots regarding the
movement and docking of ships. Normal output power must not exceed 1
watt. 5: 156.375 MHz and 156.650 MHz are available primarily for intership
navigational communications. These frequencies are available between
coast and ship on a secondary basis when used on or in the vicinity of locks
or drawbridges. Normal output power must not exceed 1 watt. Maximum
output power must not exceed 10 watts for coast stations or 25 watts for
ship stations.
11. On the Great Lakes, in addition to bridge-to-bridge communications, 156.650
MHz is available for vessel control purposes in established vessel traffic
systems. 156.650 MHz is not available for use in the Mississippi River
from South Pass Lighted Whistle Buoy “2” and Southwest Pass entrance
Mid-channel Lighted Whistle Buoy to mile 242.4 above Head of Passes
near Baton Rouge. Additionally it is not available for use in the Mississippi
River-Gulf Outlet, the Mississippi River-Gulf Outlet Canal, and the Inner
Harbor Navigational Canal, except to aid the transition from these areas.
12. Use of 156.375 MHz is available for navigational communications only in
the Mississippi River from South Pass Lighted Whistle Buoy “2” and SouthPage 106
HX870
13.
14.
15.
16.
17.
18.
west Pass entrance Mid channel Lighted Whistle Buoy to mile 242.4 above
head of Passes near Baton Rouge, and in addition over the full length of
the Mississippi River-Gulf Outlet Canal from entrance to its junction with the
Inner Harbor Navigation Canal, and over the full length of the Inner Harbor
Navigation Canal from its junction with the Mississippi River to its entry to
Lake Pontchartrain at the New Seabrook vehicular bridge.
Within 120 km (75 miles) of the United States/Canada border, in the area of
the Puget Sound and the Strait of Juan de Fuca and its approaches, 157.425
MHz is half of the duplex pair designated as Channel 88. In this area, Channel 88 is available to ship stations for communications with public coast
stations only. More than 120 km (75 miles) from the United States/Canada
border in the area of the Puget Sound and the Strait of Juan de Fuca, its
approaches, the Great Lakes, and the St. Lawrence Seaway, 157.425
MHz is available for intership and commercial communications. Outside
Puget Sound area and its approaches and the Great Lakes, 157.425 MHz
is also available for communications between commercial fishing vessels
and associated aircraft while engaged in commercial fishing activities.
When the frequency 156.850 MHz is authorized, it may be used additionally for search and rescue training exercises conducted by state or local
governments.
The frequency 156.850 MHz is additionally available to coast stations on
the Great Lakes for transmission of scheduled Coded Marine Weather Forecasts (MAFOR), Great Lakes Weather Broadcast (LAWEB) and scheduled
Notices to Mariners or Bulletins. F3C and J3C emissions are permitted.
Coast Stations on the Great Lakes must cease weather broadcasts which
cause interference to stations operating on 156.800 MHz until the interference problem is resolved.
The frequency 157.100 MHz is authorized for search and rescue training
exercises by state or local government in conjunction with U.S. Coast Guard
stations. Prior U.S. Coast Guard approval is required. Use must cease
immediately on U.S. Coast Guard request.
The duplex pair for channel 20 (157.000/161.600 MHz) may be used for
ship to coast station communications.
Available for assignment to coast stations, the use of which is in accord
with an agreed program, for the broadcast of information to ship stations
concerning the environment.
HX870
Page 107
CH
01
01A
02
03
03A
04
04A
05
05A
06
07
07A
08
09
10
11
12
13
14
15
15
16
17
18
18A
19
19A
19A
20
20A
21
21A
22
22A
23
23A
24
25
26
27
28
Page 108
VHF MARINE CHANNEL CHART
I S/D
TX
RX
CHANNEL USE
X D 156.050 160.650 Public Correspondence (Marine Operator)
156.050
Port Operation and Commercial.
VTS in selected areas
X D 156.100 160.700 Public Correspondence (Marine Operator)
X D 156.150 160.750 Public Correspondence (Marine Operator)
156.150
U.S. Government Only, Coast Guard
X D 156.200 160.800 Public Correspondence (Marine Operator),
Port operation, ship movement
156.200
Pacific coast: Coast Guard, East Coast:
Commercial fishing
X D 156.250 160.850 Public Correspondence (Marine Operator),
Port operation, ship movement
156.250
Port operation. VTS in Seattle
X S
156.300
Inter-ship Safety
X D 156.350 160.950 Public Correspondence (Marine Operator),
Port operation, ship movement
156.350
Commercial
X S
156.400
Commercial (Inter-ship only)
X S
156.450
Boater Calling channel, Commercial &
Non-commercial (Recreational)
X S
156.500
Commercial
X S
156.550
Commercial. VTS in selected areas
X S
156.600
Port operation. VTS in selected areas
X S
156.650
Inter-ship Navigation Safety (Bridge-to-bridge)
X S
156.700
Port operation. VTS in selected areas
--156.750 Environmental (Receive only)
X S
156.750
Commercial, non-commercial,
ship movement (1 W)
X S
156.800
International Distress, Safety and Calling
X S
156.850
State Controlled (1 W)
X D 156.900 161.500 Port operation, ship movement
156.900
Commercial
X D 156.950 161.550 Port operation, ship movement
156.950
US: Commercial
156.950
Coast Guard
X D 157.000 161.600 Canadian Coast Guard Only,
International: port operations and shipment
157.000
Port operation
X D 157.050 161.650 Port operation, ship movement
157.050
U.S. Government Only,
Canadian Coast Guard
X D 157.100 161.700 Port operation, ship movement
157.100
US and Canadian Coast Guard Liaison and aritime Safety Information Broadcasts announced
on channel 16
X D 157.150 161.750 Public Correspondence (Marine Operator)
157.150
U.S. Government Only
X D 157.200 161.800 Public Correspondence (Marine Operator)
X D 157.250 161.850 Public Correspondence (Marine Operator)
X D 157.300 161.900 Public Correspondence (Marine Operator)
X D 157.350 161.950 Public Correspondence (Marine Operator)
X D 157.400 162.000 Public Correspondence (Marine Operator)
HX870
CH
60
61
61A
62
62A
63
63A
64
64A
65A
66
66A
67
68
69
70
71
72
73
74
75
76
77
77
78
78A
79
79A
65
HX870
VHF MARINE CHANNEL CHART
I S/D
TX
RX
CHANNEL USE
X D 156.025 160.625 Public Correspondence (Marine Operator)
X D 156.075 160.675 Public Correspondence (Marine Operator),
Port operation, ship movement
156.075
Public Coast: Coast Guard;
East Coast: commercial fishing only
X D 156.125 160.725 Public Correspondence (Marine Operator),
Port operation, ship movement
156.125
Public Coast: Coast Guard;
East Coast: commercial fishing onl
X D 156.175 160.775 Public Correspondence (Marine Operator),
Port operation, ship movement
156.175
Port Operation and Commercial.
VTS in selected areas
X D 156.225 160.825 Public Correspondence (Marine Operator),
Port operation, ship movement
156.225
Public Correspondence (Marine Operator),
Port operation, ship movement
X D 156.275 160.875 Public Correspondence (Marine Operator),
Port operation, ship movement
156.275
Port Operations
X D 156.325 160.925 Public Correspondence (Marine Operator),
Port operation, ship movement
156.325
Port Operations
X S
156.375
US: Commercial.
Used for Bridge-to-bridge communi-cations in
lower Mississippi River. Inter-ship only,
Canada: Commercial fishing, S&R
X S
156.425
Non-commercial (Recreational)
X S
156.475
US: Non-commercial (Recreational),
Canada: Commercial fishing only,
International: Inter-ship, Port operations and
Ship movement
X S
156.525
Digital selective calling
(voice communications not allowed)
X S
156.575
US, Canada: Non-commercial (Recreational),
International: Port operations and Ship movement
X S
156.625
Non-commercial (Inter-ship only)
X S
156.675
US: Port Operations,
Canada: Commercial fishing only,
International: Inter-ship, Port operations and
Ship movement
X S
156.725
US: Port Operations,
Canada: Commercial fishing only,
International: Inter-ship, Port operations and
Ship movement
X S
156.775
Port Operations (Inter-ship only) (1W)
X S
156.825
Port Operations (Inter-ship only) (1W)
156.875
Port Operations (Inter-ship only) (1W)
X S
156.875
Port Operations (Inter-ship only)
X D 156.925 161.525 Public Correspondence (Marine Operator),
Port operation, ship-movement
156.925
Non-commercial (Recreational)
X D 156.975 161.575 Port operation and Ship movement
156.975
Commercial
Page 109
CH
80
80A
81
81A
81A
82
82A
83
83
83A
84
85
86
87
87A
88
88A
WX01
WX02
WX03
WX04
WX05
WX06
WX07
WX08
WX09
WX10
VHF MARINE CHANNEL CHART
I S/D
TX
RX
X D 157.025 161.625
157.025
X D 157.075 161.675
157.075
157.075
157.125 161.725
157.125
157.175 161.775
157.175 161.775
157.175
157.225 161.825
157.275 161.875
157.325 161.925
157.375
157.375
157.425
157.425
--162.550
--162.400
--162.475
--162.425
--162.450
--162.500
--162.525
--161.650
--161.775
--163.275
CHANNEL USE
Port operation, ship movement
Commercial
Port operation, ship movement
U.S. Government Only Environmental protection operations
Canadian Coast Guard Only
Public Correspondence (Marine Operator),
Port operation, ship movement
U.S. Government Only,
Canadian Coast Guard Only
Canadian Coast Guard Only
Public Correspondence (Marine Operator)
U.S. Government Only,
Canadian Coast Guard Only
Public Correspondence (Marine Operator)
Public Correspondence (Marine Operator)
Public Correspondence (Marine Operator)
Port operation, ship movement
Public Correspondence (Marine Operator)
Port operation, ship movement
Commercial, Inter-ship Only
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
Weather (receive only)
NOTE: Simplex channels, 03A, 21A, 23A, 61A, 64A, 81A, 82A and 83A CANNOT be lawfully
used by the general public in U.S.A. waters.
Page 110
HX870
18 WARRANTY
Marine Products Limited Warranty
PLEASE NOTE
The following “Limited Warranty” is for valid for products that have been
purchased in the United States and Canada. For limited Warranty details
outside the United States, contact the dealer in your country.
STANDARD HORIZON (a division of YAESU U.S.A.) warrants, to the original
purchaser only, each new Marine Communications Product (“Product”) manufactured and/or supplied by STANDARD HORIZON against defects in materials
and workmanship under normal use and service for a period of time from the
date of purchase as follows:
Fixed Mount and Portable Transceivers
1 year - if purchased before 01/01/91
3 years - if purchased between 01/01/91 and 01/01/94
3 years Waterproof - if purchased after 01/01/94
Loud hailers
1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91
Associated Chargers
1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91
Associated Batteries - 1 year. Note: Batteries will be deemed deflective only
if storage capacity drops below 80% of rated capacity or if leakage develops.
Associated Accessories - 1 year. Includes: Microphones/Handsets, External
Speakers, Antennas, Carrying Accessories, Power Supplies, and Signaling
Boards.
To receive warranty service, the purchaser must deliver the Product, transportation and insurance prepaid, to STANDARD HORIZON, Attention Marine repairs
6125 Phyllis Drive, Cypress, California 90630, U.S.A. Include proof of purchase
indicating model. serial number, and date of purchase. STANDARD HORIZON
will return the Product to the purchaser freight prepaid. Products purchased
prior to January 1, 1991 will bear the STANDARD HORIZON warranty terms
in effect prior to that date.
In the event of a defect, malfunction or failure of the Product during the warranty
period, STANDARD HORIZON’s liability for any breach of contract or any
breach of express or implied warranties in connection with the sale of Products
shall be limited solely to repair or replacement, at its option, of the Product or
HX870
Page 111
part(s) therein which, upon examination by STANDARD HORIZON, appear to
be defective or not up to factory specifications. STANDARD HORIZON may, at
its option, repair or replace parts or subassemblies with new or reconditioned
parts and subassemblies. Parts thus repaired or replaced are warranted for
the balance of the original applicable warranty.
STANDARD HORIZON will not warrant installation, maintenance or service of
the Products. In all instances, STANDARD HORIZON’s liability for damages
shall not exceed the purchase price of the defective Product.
This warranty only extends to Products sold within the 50 States of the United
States of America and the District of Columbia.
STANDARD HORIZON will pay all labor to repair the product and replacement parts charges incurred in providing the warranty service except where
purchaser abuse or other qualifying exceptions exist. The purchaser must pay
any transportation expenses incurred in returning the Product to STANDARD
HORIZON for service.
This limited warranty does not extend to any Product which has been subjected
to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD
HORIZON, improper installation, or subjected to use in violation of instructions
furnished by STANDARD HORIZON, nor does this warranty extend to Products
on which the serial number has been removed, defaced, or changed. STANDARD HORIZON cannot be responsible in any way for ancillary equipment not
furnished by STANDARD HORIZON which is attached to or used in connection
with STANDARD HORIZON’s Products, or for the operation of the Product with
any ancillary equipment, and all such equipment is expressly excluded from
this warranty. STANDARD HORIZON disclaims liability for range, coverage, or
operation of the Product and ancillary equipment as a whole under this warranty.
STANDARD HORIZON reserves the right to make changes or improvements
in Products, during subsequent production, without incurring the obligation to
install such changes or improvements on previously manufactured Products.
The implied warranties which the law imposes on the sale of this Product are
expressly LIMITED, in duration, to the time period specified above. STANDARD
HORIZON shall not be liable under any circumstances for consequential damages resulting from the use and operation of this Product, or from the breach of this
LIMITED WARRANTY, any implied warranties, or any contract with STANDARD
HORIZON. IN CONNECTION WITH THE SALE OF ITS PRODUCTS, STANDARD HORIZON MAKES NO WARRANTIES, EXPRESS OR IMPLIED AS TO
THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
OTHERWISE, EXCEPT AS EXPRESSLY SET FORTH HEREIN.
Page 112
HX870
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above
limitations or exclusions may not apply. This warranty gives specific legal rights,
and there may be other rights which may vary from state to state.
ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COVERED
UNDER THE TERMS OF THIS LIMITED WARRANTY.
HX870
Page 113
ON-LINE WARRANTY REGISTRATION
THANK YOU for buying STANDARD HORIZON (a division of YAESU
U.S.A.) products! We are confident your new radio will serve your
needs for many years!
Please visit www.standardhorizon.com to register your Marine
VHF. It should be noted that visiting the website from time to time may
be beneficial to you, as new products are released they will appear
on the STANDARD HORIZON website. Also a statement regarding
product support should be added to the manual.
Product Support Inquiries
If you have any questions or comments regarding the use of the radio,
you can visit the STANDARD HORIZON website to send an E-Mail
or contact the Product Support team at (714) 827-7600 ext 6300 M-F
8:00-5:00 PST.
In addition to the warranty, STANDARD HORIZON includes a lifetime
“flat rate” and “customer loyalty” programs to provide service after the
warranty period has expired. If you wish to obtain the flat rate price
for out-of-warranty repair, you must include the information on the
Owner’s Record with the unit when you return it to your Dealer or to
STANDARD HORIZON.
Lifetime Flat Rate Service Program: For the original Owner only, for
the lifetime of the unit, STANDARD HORIZON will repair the unit to
original specifications.
Note: The flat rate amount is payable by the Owner only if STANDARD
HORIZON or the STANDARD HORIZON Dealer determines that a
repair is needed. After the repair, a 90-day warranty will be in effect
from the date of return of the unit to the Owner.
This service program is not available for equipment which has failed as
a result of neglect, accident, breakage, misuse, improper installation
or modification, or water damage (depending on the product).
Page 114
HX870
19 INSTALLATION OF THE SBT-13
The SBT-13 is a battery case that holds five “AAA” size Alkaline batteries and
is used with the HX870 transceiver. The Alkaline batteries can be used for
receiving and transmission in an emergency, and battery life will be shortened
dramatically.
1. Slide the five “AAA” size Alkaline batteries into the SBT-13 with the Negative
(−) side of the batteries touching the spring connections inside the SBT-13.
2. Slide the battery cover lock switch to the “UNLOCK” position, then press
“PUSH” to open the battery cover.
3. Install the SBT-13 into the battery rest on the bottom of the transceiver
pushing it to the battery contacts until it clicks.
4. Attach the battery cover, then slide the battery cover lock switch to the
“LOCK” position.
NOTE
When the SBT-13 Alkaline Battery Case is used, the HX870 transmit
output is fixed to 1 W.
HX870
Page 115
20 SPECIFICATIONS
Performance specifications are nominal, unless otherwise indicated, and are
subject to change without notice. Measured in accordance with TIA/EIA-603.
20.1 GENERAL
Frequency Range......................................... TX: 156.025 MHz - 157.425 MHz
RX: 156.050 MHz - 163.275 MHz
Channel Spacing....................................................................................25 kHz
Frequency Stability....................±3 ppm (−4 °F to +140 °F [−20 °C to +60 °C])
Emission Type..................................... 16K0G3E for Voice, 16K0G2B for DSC
Antenna Impedance.................................................................................. 50 Ω
Supply Voltage..........................7.4V DC, Negative Ground (Battery Terminal)
Current Consumption........................................................... 330 mA (Receive)
100 mA (Standby, GPS On)
60 mA (Standby, GPS Off)
1.6 A / 1.0 A / 0.7 A
(TX: 6W / 2W / 1W)
Operating Temperature.............................−4 °F to +140 °F (−20 °C to +60 °C)
DSC Individual Directory............................................................ 100 Memories
DSC Group Directory................................................................... 20 Memories
DSC Format............................................................................. ITU-R M.493-13
NMEA Output............................ DSC, DSE, GLL, GGA, GSA, GSV, and RMC
Case Size (W x H x D).........2.44” x 5.43” x 1.69” (62 mm x 138 mm x 43 mm)
(w/o knob & antenna)
Weight..................................................................................... 11.36 oz (322 g)
w/ SBR-13LI, hand strap, belt clip & antenna
20.2 TRANSMITTER
RF Power Output...................6 W (HI) / 2 W (MIDDLE) / 1 W (LOW) (@7.4 V)
Modulation Type.................................................................Variable Reactance
Maximum Deviation................................................................................±5 kHz
Spurious Emission.................................................................... −75 dBc typical
Microphone Impedance............................................................................. 2 kΩ
Page 116
HX870
20.3 RECEIVER (for Voice and DSC)
Circuit Type.............................................Double-Conversion Superheterodyne
Intermediate Frequencies..........................................for Voice 1st: 38.85 MHz
2nd: 450 kHz
for DSC 1st: 30.4 MHz
2nd: 450 kHz
Sensitivity...................................................for Voice 0.25 μV for 12 dB SINAD
for DSC 0.5 μV for 12 dB SINAD
Adjacent Channel Selectivity........................................................ 70 dB typical
Intermodulation............................................................................. 70 dB typical
Hum & Noise Ratio...................................................................................40 dB
Selectivity..................................................... 12 kHz / 25 kHz (−6 dB / −60 dB)
AF Output (Internal SP)..................... 700 mW @16 Ω for 10 % THD (@7.4 V)
20.4 GPS
Receiver Channels.........................................................................66 channels
Sensitivity.........................................................................Less than −147 dBm
Time to First Fix......................................................1 min typical (@Cold Start)
5 sec typical (@Hot Start)
Geodetic Datum................................................................................... WGS84
20.5 NMEA OUTPUT
NMEA 0183 Output Sentence (9600 baud).................. DSC, DSE, GGA, GLL,
RMC, GSA & GSV
HX870
Page 117
21 FCC RADIO LICENSE INFORMATION
Standard Horizon radios comply with the Federal Communication Commission
(FCC) requirements that regulate the Maritime Radio Service.
21.1 STATION LICENSE
An FCC ship station license is no longer required for any vessel traveling in
U.S. waters (except Hawaii) which is under 20 meters in length. However, any
vessel required to carry a marine radio on an international voyage, carrying
a HF single side band radiotelephone or marine satellite terminal is required
to have a ship station license. FCC license forms, including applications for
ship (605) and land station licenses can be downloaded via the Internet at
http://www.fcc.gov/Forms/Form605/605.html. To obtain a form from the FCC,
call (888) 225-5322.
21.2 RADIO CALL SIGN
Currently the FCC does not require recreational boaters to have a Ship Radio
Station License. The USCG recommends the boats registration number and
the state to be used when calling another vessel.
21.3 CANADIAN SHIP STATION LICENSING
You may need a license when traveling in Canada. If you do need a license
contact their nearest field office or regional office or write:
Industry Canada
Radio Regulatory Branch
Attn: DOSP
300 Slater Street
Ottawa, Ontario
Canada, KIA 0C8
21.4 FCC / INDUSTRY CANADA INFORMATION
The following data pertaining to the transceiver is necessary to fill out the
license application.
Type Acceptance........................................................................... FCC Part 80
Output Power.......................1 Watt (low), 2 Watts (middle) and 6 Watts (high)
Emission...........................................................................16K0G3E, 16K0G2B
Frequency Range.......................................................156.025 to 163.275 MHz
FCC Type Number...................................................................... K6630573X30
Industry Canada Type Approval............................................. 511B-30573X30
Page 118
HX870
22 RF EXPOSURE SAFETY STATEMENT
SAFETY INFORMATION
Your wireless handheld portable transceiver contains a low power transmitter. When the Push-to-Talk (PTT) button is pushed, the transceiver sends out
radio frequency (RF) signals. In August 1996, the Federal Communications
Commission adopted RF exposure guidelines with safety levels for hand-held
wireless devices.
This device is authorized to operate at a duty factor not to exceed 50 % (this
corresponds to 50% transmission time and 50 % reception time).
WARNING: To maintain compliance with the FCC’s RF exposure guidelines,
this transmitter and its antenna must maintain a separation distance of at least
1 inch (2.5 centimeters) from your face. Speak in a normal voice, with the
antenna pointed up and away from the face at the required separation distance.
If you use a headset accessory for this radio, with the radio worn on your body,
use only the Yaesu belt clip for this transceiver, and ensure that the antenna is
at least 1 inch (2.5 centimeters) from your body when transmitting.
Use only the supplied antenna. Unauthorized antennas, modifications, or
attachments could damage the transmitter, and may violate FCC regulations.
CONSIGNES DE SECURITE
Votre émetteur-récepteur portatif sans fil contient un émetteur à faible puissance.
Lorsque vous appuyez sur le bouton Push-to-Talk (PTT), l’émetteur-récepteur
émet des signaux de radiofréquence (RF). En août 1996, la FCC (Commission
Fédérale des Communications) a adopté des directives relatives à l’exposition
aux RF avec des niveaux de sécurité pour les appareils sans fils portatifs.
Le fonctionnement de cet appareil est autorisé à un facteur d’utilisation ne
dépassant pas 50 % (correspondant à 50% de la durée de transmission et
50% de la durée de réception).
AVERTISSEMENT: Pour assurer la conformité avec les directives d’exposition
RF de la FCC, cet émetteur-récepteur et son antenne doivent être maintenus
à une distance minimum d’un pouce (2,5 centimètre) de votre visage. Parlez
avec une voix normale, avec l’antenne dirigée vers le haut et éloignée du
visage, à la distance requise.
Si vous utilisez un casque pour cette radio, et que vous portez la radio sur vous,
utilisez exclusivement le clip de ceinture Yaesu pour cet émetteur-récepteur,
et assurez-vous que l’antenne se trouve à une distance minimum d’un pouce
(2,5 centimètres) de votre corps pendant l’émission.
Utilisez exclusivement l’antenne fournie. Les antennes, les modifications ou
les accessoires non autorisés peuvent endommager l’émetteur-récepteur et
enfreindre les réglementations FCC.
HX870
Page 119
23 FCC NOTICE
NOTICE
Unauthorized changes or modifications to this equipment may void
compliance with FCC Rules. Any change or modification must be
approved in writing by STANDARD HORIZON.
NOTICE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Page 120
HX870
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Changes or modifications to this device not expressly approved by YAESU U.S.A.
could void the User’s authorization to operate this device.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)
approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques
de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le
type d’antenne et son gain de sorte que la puissance isotrope rayonnée quivalente
(p.i.r.e.) ne dépassepas l’intensité nécessaire à l’établissement d’une communication
satisfaisante.
This radio transmitter (identify the device by certification number, or model number
if Category II) has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou
son numéro de modèle s’il fait partie du matériel de catégorie I) a été approuvé par
Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous
et ayant un gain admissible maximal et l’impédance requise pour chaque type
d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de
l’émetteur. l’établissement d’une communication satisfaisante.
HX870
Page 121
YAESU U.S.A.
6125 Phyllis Drive, Cypress, California 90630
www.standardhorizon.com
Page 122
Copyright 2014
YAESU MUSEN CO., LTD.
All rights reserved.
No portion of this manual
may be reproduced
without the permission of
YAESU MUSEN CO., LTD.
Printed in China
HX870

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2014:08:17 20:35:27-04:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2014:08:17 20:35:45-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:08:17 20:35:45-04:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Document ID                     : uuid:2509c4d3-cd19-45dc-99af-6018d34fda53
Instance ID                     : uuid:4559cddc-6f01-4c4f-a8ea-ff0d3a8f75b9
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 27

EXIF Metadata provided by EXIF.tools