Yamaha 6_DTX 5000 QCguide DTX Connection Diagram
User Manual: Yamaha DTX-5000 Connection Diagram
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
Quick-Connect Guide DTX-5000 Home Theater in a Box ��� ���� ������� Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect Guide will help you get started. Follow the steps to assemble and connect the speakers first. Refer to your Owner’s Manuals as well as those that came with your other components for complete instructions and precautions. Be sure to turn off all power while making connections. You will need the following which are not included in the package: Phillips screwdriver, wire cutter/stripper, toggle bolts, molly anchor screws or sheet metal screws. 1 In the Box 2 Room Layout (8) (4) (2) Inspect Contents After unpacking, inspect the contents to confirm you have the above items: two main speakers, three rear speakers, one center speaker, speaker wire, two bases, two speaker stands, two finishing brackets, RCA cable, one bag each of long screws (8) and short screws (4), center speaker bracket and screw, subwoofer, non-skid pads for base, non-skid pads for stands, cable protection seal for base, audio/video RCA cable, HTR-5750 Receiver with remote, and DV-S5770 DVD Player with remote, and optical cable. Also included, but not shown, are AM and FM antennas and three related Owner’s Manuals. 3 4 Main Speaker Assembly Attach Bases to Stands Apply the non-skid pads as shown in the inset. Identify both speaker stands and both bases and attach using short screws as shown. 7 5 Thread Speaker Wires Cut speaker wire to appropriate lengths for all speaker connections and set aside. Place each long stand upright on its base. Thread main speaker wire through oval opening on stand and pull through opening on underside of base. Pull wire all the way through leaving extra length near oval opening as shown. Apply non-skid pads on stands. Use this size screw 6 Speaker Placement After assembly of the speakers place them so they appear in the approximate positions as shown in the diagram above. Rear Speakers TYPICAL 1 3/4" 16 7/32" Use this size screw Speaker Wire 8 9 For mounting screws, use minimum 13/4" tapping screw (not included). Leave 1/4" space between screw head and wall. Connect Main Speaker Wire For illustration purposes, stand, which is now attached to speaker, is not shown in diagram above. Locate screw-type input terminals at the rear of each of the speakers. Connect the speaker wire as shown. The positive (+) side of the wire with the white stripe attaches to the red terminal. The negative (-) side attaches to the black terminal. (Please see your NS-FP9500 Owner’s Manual for more detailed instructions on speaker wire connections.) Place assembled main speakers in desired location to the left and right of the viewing/audio source. (See Step 2, Room Layout.) Mount Rear Speakers and Rear Center Speaker (Optional) Fasten mounting screws into a firm wall or wall support as shown. Hang the keyholes on the back of the each of the speakers on the protruding screws. Attach speaker wire as shown in Step 6. NOTE Banana plug connectors (not included) can be used to connect speaker wire to speaker terminals. Please see your Owner’s Manual for directions. WARNING If you are unsure of how to securely and safely fasten speakers to a wall, please contact a reliable source about the best type of hardware for your particular wall’s construction. Secure installation is the purchaser’s responsibility. See Owner’s Manual for additional instructions and precautions. Attach Main Speakers Lay stands down. Line up holes so that oval opening is near speaker wire connections on speaker. Attach main speakers using long screws as shown. Attach cable protection seal to base as shown in inset. Center Speaker Assembly Attach Finishing Brackets on top of two speaker stands. Attach Bracket and Speaker Wire Attach bracket to center speaker using supplied screw as shown. Attach speaker wire as shown in Step 6. 10 16 7/32" HTR-5750 Receiver Receiver Connections Connect Speakers Positive (+) side of the wire with white stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. CAUTION Receiver must not be plugged in while connecting speakers. FRONT Right Left CENTER SURROUND BACK SURROUND Right Left YST-SW030 Subwoofer 11 12 13 AM Loop Antenna Indoor FM Antenna HTR-5750 Receiver HTR-5750 Receiver DV-S5770 DVD Player HTR-5750 Receiver Subwoofer Connection Connect RCA Cable Connect RCA cable to subwoofer. Set subwoofer VOLUME control to half-way mark and POWER to OFF. Connect RCA cable to receiver from subwoofer. WARNING Components must not be plugged in while connecting them. Wait until all connections are made before plugging in your components. Antenna Connection Connect Antennas to Receiver Locate AM loop antenna and indoor FM antenna. Keeping receiver unplugged, connect as shown. For more information about obtaining clear reception and grounding, see your Owner’s Manual. DVD Player Connection DVD Player Optical Connection Remove dust cap on optical input as shown on insets. Connect optical cable to receiver. Connect optical cable to DVD player from receiver. 15 14 DVD Player Video Connection Top: Connect RCA video cable to receiver: Yellow to “DVD,” as shown, and leave White and Red unplugged. Bottom: Connect video cable to DVD player from receiver: Yellow to “Video,” as shown, and leave White and Red unplugged. 16 HTR-5750 Receiver HTR-5750 Receiver HTR-5750 Receiver DSS/Cable/ HDTV Tuner Box Audio/Video OUT Video Game Console Video Game Console Connection AUDIO/VIDEO IN VCR Connection Connect VCR (optional) Connect audio/video cables (not included) as shown. NOTE VCR shown is for illustration purposes only. When using a hi-fistereo VCR, set the Tuner/Line switch on the VCR to “Line” position to record from another source connected to the HTR-5750 receiver. Audio/Video OUT Connect DSS/Cable/HDTV Tuner Box (optional) Connect RCA audio/video cables (not included) and optional optical cable (not pictured) to “DTV/CBL” terminals on receiver to A/V OUT connections on Box as shown. Connect Game Console or Video Camera (optional) Connect RCA audio/video cables (not included) as shown. AUDIO/VIDEO OUT VCR DSS/Cable/HDTV Tuner Connection 19 18 20 HTR-5750 Receiver 17 HTR-5750 Receiver HTR-5750 Receiver CD Player MD/CD-R Recorder Audio IN Audio OUT Video Monitor CD Player Connection Connect CD Player (optional) Connect RCA audio Video IN Video Monitor Connection Connect a Video Monitor Connect an RCA video cable (not included) to receiver Monitor OUT from your video monitor as shown . cables (not included) to “CD” terminals on receiver as shown. If your CD Player has digital output terminal, connect digital cable (not included) to HTR-5750 Receiver Digital Input terminal. See page 17 of your HTR-5750 Owner’s Manual for more information. Enjoy the Yamaha Home Theater Experience Be sure to put batteries in your remotes (see Owner’s Manuals for instructions). Refer to your Owner’s Manuals for each component in your system for more information. Now, relax and enjoy the unparalleled sound of your Yamaha Home Theater system. Part No. 5000QCG rev1 04/04 MD/CD-R Player Connection Connect MD/CD-R Recorder (optional) Connect RCA audio cables (not included) to “MD/CD-R” terminals on receiver as shown. Plug In Plug in the subwoofer, receiver, DVD player and other components. Power on the receiver first, then the subwoofer, and the others next. Adjust volume on the receiver. Please see each of your your respective Owner’s Manuals for recommended guidelines and settings. YAMAHA ELECTRONICS CORPORATION, USA 6660 Orangethorpe Avenue Buena Park, CA 90620 http://www.yamaha.com Phone: 1-800-292-2982 ©2004 Yamaha Electronics Corporation Printed in USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d8dc3c92-0286-11d9-a43e-003065b8caf8 Create Date : 2004:04:12 13:29:57Z Modify Date : 2004:09:09 10:36:57-07:00 Metadata Date : 2004:09:09 10:36:57-07:00 Creator Tool : Adobe InDesign 2.0.2 Version ID : 1 Rendition Class : proof:pdf Document ID : adobe:docid:indd:b5a03c9a-8e17-11d8-accd-cd1507a21362 Rendition Of Document ID : adobe:docid:indd:b5a03c9a-8e17-11d8-accd-cd1507a21362 Rendition Of Version ID : 1 Rendition Of Rendition Class : default Format : application/pdf Title : 6_DTX-5000-QCguide.indd Trapped : False Creator : Adobe InDesign 2.0.2 Producer : Adobe PDF Library 5.0EXIF Metadata provided by EXIF.tools