Yamaha 170602_mtx_mrx_xmv_ex_rcps_v310_rev10_en MTX3, MTX5 D, MRX7 XMV Series, EXi8, EXo8 Remote Control Protocol Specifications V3.1.0 Mtx Mrx Ex Spec V310 En

• 0. Revision History
• 1. Setup
  • 1.1. Connection Procedure
  • 1.2. Configuring the Remote Controller
  • 1.3. Device Configuration
    • 1.3.1. MTX3, MTX5-D and MRX7-D
    • 1.3.2. XMV, EXi8 and EXo8
    • 1.3.3. MRX7-D and Remote Control Setup List
• 2. Command List
  • 2.1. Commands from a device sent to a remote controller
  • 2.2. Commands for controlling a device
  • 2.3. Extended commands
• 3. Command Specifications
  • 3.1. Basic Command Specifications
  • 3.2. Commands a Device Sends to a Remote Controller
    • 3.2.1. Device status change notification
    • 3.2.2. Parameter change notification
    • 3.2.3. Meter information notification
    • 3.2.4. Preset change notification
    • 3.2.5. Snapshot change notification
    • 3.2.6. Event processing change notification
  • 3.3. Commands for controlling a device
    • 3.3.1. Device status query
    • 3.3.2. Device run mode change
    • 3.3.3. MTX external control protocol run mode setting
    • 3.3.4. Parameter query
    • 3.3.5. Parameter setting
    • 3.3.6. Meter control
    • 3.3.7. Preset processing
    • 3.3.8. Snapshot Recall processing
  • 3.4. Extended commands
    • 3.4.1. Product information query request
    • 3.4.2. Preset processing request
    • 3.4.3. Event processing request
  • 3.5. Command Errors
    • 3.5.1. Command Error Notifications
• 4. Command Sequence
  • 4.1. Communication start sequence
  • 4.2. Parameter sync sequence
  • 4.3. Parameter query sequence at any given time
  • 4.4. Meter data request/query sequence
  • 4.5. Preset recall request sequence
  • 4.6. Sequence when parameters are changed by another controller
• 5. Meter Value
• 6. Parameter Value Details
  • 6.1. Fader parameter
    • 6.1.1. Fader with "-Infinity to 0dB" range
    • 6.1.2. Fader with "-Infinity to 10dB" range
  • 6.2. Other parameters (MTX3, MTX5-D)
    • 6.2.1. INPUT PATCH
    • 6.2.2. INPUT CHANNEL
      • 6.2.2.1. 3BAND EQ
      • 6.2.2.2. GATE
      • 6.2.2.3. COMPRESSOR
      • 6.2.2.4. AGC
      • 6.2.2.5. DUGAN AUTOMIXER
    • 6.2.3. EFFECT
    • 6.2.4. ZONE
      • 6.2.4.1. PAGING (MTX5-D only)
      • 6.2.4.2. 1st/2nd PRIORITY
      • 6.2.4.3. ANC
    • 6.2.5. ROUTER
      • 6.2.5.1. ROUTER
      • 6.2.5.2. OSCILLATOR
    • 6.2.6. OUTPUT CHANNEL
      • 6.2.6.1. 4BAND EQ
      • 6.2.6.2. SPEAKER PROCESSOR
    • 6.2.7. OUTPUT PATCH
      • 6.2.7.1. OUTPUT PATCH
      • 6.2.7.2. YDIF PATCH
    • 6.2.8. MY4-AEC
      • 6.2.8.1. MY4-AEC Input Patch
      • 6.2.8.2. MY4-AEC FBS
  • 6.3. Other parameters (MRX7-D)
    • 6.3.1. Ambient Noise Compensator
    • 6.3.2. Auto Gain Control
    • 6.3.3. Combiner
      • 6.3.3.1. Room Combiner
      • 6.3.3.2. Room Combiner plus Automixer
    • 6.3.4. Dynamics
      • 6.3.4.1. Compressor
      • 6.3.4.2. Gate/Ducking
      • 6.3.4.3. Limiter
      • 6.3.4.4. Paging Ducker
    • 6.3.5. Effect
    • 6.3.6. EQ
      • 6.3.6.1. GEQ
      • 6.3.6.2. PEQ
    • 6.3.7. Filter
      • 6.3.7.1. HPF/LPF/BPF
    • 6.3.8. Mixer
      • 6.3.8.1. Dugan Automixer
    • 6.3.9. Oscillator
    • 6.3.10. Paging
    • 6.3.11. Speech Privacy
    • 6.3.12. Speaker Processor
    • 6.3.13. MY4-AEC (MTX5-D only)
      • 6.3.13.1. MY4-AEC FBS
• 7. Parameter List
  • 7.1. MTX3/MTX5-D
  • 7.2. MRX7-D
  • 7.3. XMV Series
  • 7.4. EXi8
  • 7.5. EXo8
  • 7.6. MY4-AEC
    • 7.6.1. MTX3, MTX5-D
    • 7.6.2. MRX7-D
• 8. Meter List
  • 8.1. MTX3/MTX5-D
  • 8.2. MRX7-D
  • 8.3. XMV Series
  • 8.4. EXi8
  • 8.5. EXo8