Yamaha TF5 TF3 TF1 TF RACK V3.1 Reference Manual TF5/TF3/TF1/TF En Rm F0
User Manual: Yamaha TF5/TF3/TF1/TF-RACK Reference Manual
Open the PDF directly: View PDF 
.
Page Count: 104
| Download | |
| Open PDF In Browser | View PDF |
DIGITAL MIXING CONSOLE V3.1 Reference Manual EN Table of contents Table of contents Overview ................................................................................... 4 Maintenance screen................................................................. 79 Using this document................................................................................................ 4 The display .............................................................................................................. 4 Initialize All Memory screen .................................................................................... 79 Initialize Current Memory screen ............................................................................ 80 Initialize NY64-D screen (V3.0 and later) ................................................................ 80 Input Port Trim screen ............................................................................................ 81 Output Port Trim screen ......................................................................................... 81 Fader Calibration screen (TF5/TF3/TF1) .................................................................. 82 Channel Color Calibration screen (TF5/TF3/TF1) .................................................... 83 Universal operations ................................................................. 8 Library screen .......................................................................................................... 8 Keyboard screen .................................................................................................... 10 Menu .................................................................................................................... 10 Button and slider operations .................................................................................. 10 Reference ................................................................................. 84 Toolbar.................................................................................... 11 SCENE screen ........................................................................................................ METER screen ........................................................................................................ RECORDER screen (INPUT/OUTPUT/TITLE LIST screen) .......................................... MONITOR screen .................................................................................................. SETUP screen (V3.0 and later)................................................................................ LOGIN screen (V3.0 and later) ............................................................................... 11 13 14 18 21 38 List of parameters saved in Scenes and Presets........................................................ 84 Access limitation parameter list............................................................................... 90 Quick Config Input and input channel relationships ............................................... 92 Warnings and error messages ................................................................................. 94 Index........................................................................................ 96 Product dimensions................................................................. 98 OVERVIEW screen.................................................................... 42 CH STRIP section ................................................................................................... 42 FADER section........................................................................................................ 44 Configuration screens............................................................. 47 INPUT screen ......................................................................................................... EQ screen .............................................................................................................. GATE screen .......................................................................................................... COMP screen ........................................................................................................ FX screen (FX1/2, InsFX1–6) .................................................................................. SEND TO AUX screen ............................................................................................ ASSIGN screen....................................................................................................... CH VIEW screen ..................................................................................................... CH NAME screen ................................................................................................... GEQ screen............................................................................................................ OUTPUT screen ..................................................................................................... SEND FROM screen ............................................................................................... DCA ASSIGN screen............................................................................................... DELAY screen (V2.5 and later)................................................................................ 47 49 53 55 57 62 63 64 71 72 74 75 76 78 -2- TF Series Reference Manual Table of contents Procedures Adjusting the send level from AUX channels, STEREO channels, and SUB channel to a MATRIX channel (V2.5 and later) ..................................... Assigning channels to a DCA group............................................................................... Using the maintenance screen....................................................................................... Calibrating the faders .................................................................................................... If a fader must be calibrated again................................................................................. Adjusting channel colors................................................................................................ Recalling a Preset............................................................................................................. 9 Editing a Preset................................................................................................................ 9 Displaying configuration screens ................................................................................... 11 Saving the current settings as a new Scene.................................................................... 12 Recalling a Scene........................................................................................................... 12 Editing a Scene.............................................................................................................. 12 Setting the input ........................................................................................................... 15 Setting the output ......................................................................................................... 16 Recording...................................................................................................................... 17 Playing back files stored on a USB storage device .......................................................... 18 Checking the input signals ............................................................................................ 19 Setting the oscillator...................................................................................................... 20 Using Recall safe function .............................................................................................. 25 Configuring settings in the PREFERENCE screen............................................................. 29 Assigning a feature to a [USER DEFINED KEY] ................................................................ 32 Assigning a feature to a [USER DEFINED KNOB] ............................................................ 33 Assigning a feature to the footswitch............................................................................. 33 Configuring the custom fader bank ............................................................................... 34 Recalling the CUSTOM FADER BANK (TF5/TF3/TF1) ...................................................... 34 Applying access permissions .......................................................................................... 40 Resetting user settings ................................................................................................... 40 Loading user settings to other TF series consoles ........................................................... 40 OVERVIEW screen operations......................................................................................... 44 Copying settings from one channel and applying them to another channel .................. 45 Setting stereo link and the input source......................................................................... 48 Adjusting EQ in manual mode ....................................................................................... 51 Adjusting EQ in 1-knob EQ mode .................................................................................. 51 Setting HPF ................................................................................................................... 52 Setting LPF .................................................................................................................... 52 Setting the gate............................................................................................................. 54 Setting the compressor.................................................................................................. 56 Setting an effect ............................................................................................................ 58 Setting an insert effect................................................................................................... 58 Adjusting the SEND TO AUX level.................................................................................. 63 Using GEQ .................................................................................................................... 73 Using faders to adjust GEQ (TF5/TF3/TF1) ..................................................................... 73 Adjusting the SEND FROM level .................................................................................... 75 -3- 75 77 79 82 82 83 TF Series Reference Manual Overview Overview Using this document The display You can search for keywords and view reference pages while using this document. Here we will introduce the different screens displayed on the TF Series console display. OVERVIEW screen Searching for keywords You can use the search function of your PDF viewing software to search for the desired text within the document. When using Adobe Reader, enter the desired text in the search bar and press your computer'skey to begin the search. This screen is displayed when you first turn on the console. From here you can move to other screens depending on the operations that you want to perform. You can return to the OVERVIEW screen at any time by pressing the Home key ( ). For the TF5/TF3/TF1, the CH STRIP section is displayed. Moving backward and forward in your viewing history When viewing this document using Adobe Reader, you can easily move backward and forward in your viewing history. This is particularly useful when you click a link to jump to another page, and then want to return to the original page. Using the index An index of the keywords and topics in this document can be found on page 96. You can use the index to easily jump to the desired explanation or topic. For the TF-RACK, the FADER section is displayed. You can switch between the CH STRIP section and FADER section by pressing the Home key ( ). For more information about the OVERVIEW screen, see page 42. -4- TF Series Reference Manual Overview I Navigation area Configuration screens You can touch an area of the OVERVIEW screen to display the configuration screen for the corresponding area. ձ ղ Displays the features of the currently selected channel. You can drag the screen up and down to display other features. CH1–CH32 1 Displays the INPUT screen. (page 47) 2 Displays the EQ screen. (page 49) 3 Displays the GATE screen. (page 53) 4 Displays the COMP screen. (page 55) 5 Displays the FX1 screen. (page 57) 6 Displays the FX2 screen. (page 57) 7 Displays the SEND TO AUX screen. (page 62) 8 Displays the ASSIGN screen. (page 63) 9 Displays the CH VIEW screen. (page 64) ճ 1 Toolbar (page 11) ձ ղ ճ մ յ ն Displays buttons for frequently used features. When you touch a button, the corresponding configuration screen in the main area of the display. 2 Navigation area շ Allows you to select which screen is displayed in the main area of the display. 3 Main area (page 47) ո Displays the screen that you select using the toolbar or navigation area. չ -5- TF Series Reference Manual Overview CH33–CH40 1 Displays the INPUT screen. (page 47) 2 Displays the EQ screen. (page 49) 3 Displays the FX1 screen. (page 57) 4 Displays the FX2 screen. (page 57) 5 Displays the SEND TO AUX screen. (page 62) 6 Displays the ASSIGN screen. (page 63) 7 Displays the CH VIEW screen. (page 64) FX RTN 1/2 1 Displays the SEND FROM screen. (page 75) 2 Displays the FX1 screen. (page 57) 3 Displays the EQ screen. (page 49) 4 Displays the SEND TO AUX screen. (page 62) 5 Displays the ASSIGN screen. (page 63) 6 Displays the CH VIEW screen. (page 64) ձ ղ ճ ձ ղ ճ մ մ յ յ ն ն AUX1–AUX8 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the GEQ screen. (page 72) 4 Displays the COMP screen. (page 55) 5 Displays the OUTPUT screen. (page 74) 6 Displays the CH VIEW screen. (page 64) շ STIN1/2 1 Displays the INPUT screen. (page 47) 2 Displays the EQ screen. (page 49) 3 Displays the FX1 screen. (page 57) 4 Displays the FX2 screen. (page 57) 5 Displays the SEND TO AUX screen. (page 62) 6 Displays the ASSIGN screen. (page 63) 7 Displays the CH VIEW screen. (page 64) ձ ձ ղ ճ մ յ ղ ն ճ մ յ ն շ -6- TF Series Reference Manual Overview AUX9/10–AUX19/20 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the COMP screen. (page 55) 4 Displays the INSFX screen. (page 57) 5 Displays the OUTPUT screen. (page 74) 6 Displays the CH VIEW screen. (page 64) STEREO 1 Displays the EQ screen. (page 49) 2 Displays the GEQ screen. (page 72) 3 Displays the COMP screen. (page 55) 4 Displays the OUTPUT screen. (page 74) 5 Displays the CH VIEW screen. (page 64) ձ ղ ճ ձ ղ ճ մ մ յ յ ն SUB DCA1–DCA8 1 Displays the DCA ASSIGN screen. (page 76) 2 Displays the CH VIEW screen. (page 64) 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the COMP screen. (page 55) 4 Displays the OUTPUT screen. (page 74) 5 Displays the CH VIEW screen. (page 64) ձ ձ ղ ճ մ յ ղ MATRIX1–MATRIX4 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the DELAY screen. (page 78) 4 Displays the OUTPUT screen. (page 74) 5 Displays the CH VIEW screen. (page 64) ձ ղ ճ մ յ -7- TF Series Reference Manual Universal operations Universal operations In this section we will introduce the screens that are displayed when you press the Library key ( ) and the Menu key ( ), which are found in the Display section of the console's top panel. Library screen Allows you to recall saved Presets. A Preset is a collection of settings that are customized for a certain type of input, microphone, instrument, etc. By recalling a Preset, you can set up a channel quickly and easily according to the type of input, and then fine-tune the settings to your specific needs. You can even save your own Presets. ձ ղ ճ պ չ մ ո շ 4 List You can click a header in the list to sort the items by that header. (List items cannot be sorted by "Information".) To select a Preset, simply touch it. The selected Preset is highlighted, and can then be saved, recalled, or edited. A lock icon is displayed or cleared each time you touch the column. When the icon is displayed, the Preset is write-protected. The date on which the Preset was last saved is displayed in the Date column. 5 Recall on/off checkboxes Allow you to determine which parameters will be recalled (checkbox on) and not be recalled (checkbox off). Input channels HA: Analog/digital gain setting, phantom power on/off, phase setting Input Select: Input source settings Name: Channel name, icon, and color AUX 1–8, STEREO channels GEQ: GEQ settings Name: Channel name, icon, and color FX RTN, AUX9/10–AUX19/20 channels FX: Effect settings Name: Channel name, icon, and color SUB, MATRIX1–4 channels Name: Channel name, icon, and color 6 Recall CH button յ Recalls a Preset to the selected channel. 7 Edit button ն Touch this button to display the keyboard so you can edit the title and comment. (Keyboard screenpage 10) 1 Channel name Displays the name of the channel. 8 Store button Saves the settings for the current channel as a Preset. The settings will overwrite the Preset selected in the Library list. 2 Category selection button Allows you to select a category. Presets that match the selected category are displayed in the Library list. 9 Store As button 3 Library selection button Allows you to switch between the available Libraries. The Presets that are stored in the selected Library are displayed in the list. LIBRARY A: Displays the Presets stored in LIBRARY A. LIBRARY B: Displays the Presets stored in LIBRARY B. -8- Saves the settings for the current channel as a new Preset. Touch this button to display the keyboard so you can enter the Preset name. (Keyboard screenpage 10) 0 Preset number (V1.1 and later) Displays the Preset number. The first number indicates the number of Presets in the selected category (2), and the second number indicates the total number of Presets. TF Series Reference Manual Universal operations Displaying the Library screen from a configuration screen Editing a Preset When you display the Library screen from a configuration screen, one of the following buttons is added to the Library screen, depending on the configuration screen you were using. Recall EQ button Displayed when you enter the Library from the EQ screen, and recalls EQ settings only. Recall Gate button Displayed when you enter the Library from the GATE screen, and recalls GATE settings only. Recall COMP button Displayed when you enter the Library from the COMP screen, and recalls COMP settings only. Recall FX button Displayed when you enter the Library from the FX screen, and recalls FX settings only. Recall GEQ button Displayed when you enter the Library from the GEQ screen, and recalls GEQ settings only. 1. Recall the desired Preset. 2. Touch the Edit button. Display the keyboard so you can edit the title and comment. (Keyboard screenpage 10) Store As button Edit the desired items. Store button 3. touch the Store or Store As button. Store button: Saves the settings for the current channel as a Preset. The settings will overwrite the Preset selected in the Library list. Edit button Store As button: Saves the settings for the current channel as a new Preset. Library screen menu Press the Menu key ( Recalling a Preset ) from the Library screen to display the following items. 1. Touch a Library selection button to select the Library that contains the desired Preset. A list of Presets is displayed. 1 Copy ձ Copies the selected Preset. 2 Cut ղ Preset list Cuts the selected Preset. 3 Paste Pastes the copied or cut Preset to the Library. ճ 4 Delete Deletes the selected Preset. մ You can click a header in the list to sort the items by that header. (List items cannot be sorted by "Information".) 2. Touch the desired Preset. The selected Preset is highlighted. 3. Select the items that will be recalled. Turn the checkboxes on for items that you want to recall. 4. Touch the Recall CH button. The Preset is recalled to the selected channel. -9- TF Series Reference Manual Universal operations Keyboard screen Button and slider operations Allows you to edit titles and comments. 䐟 Item 䐠 䐡 䐢 Term Close button [X] Touch to close the current screen. OK button Applies the current settings. Cancel button Cancels the operation and returns to the previous screen. Clear button Clears the information you entered. Jump icon Displays the relevant screen. Slider Flashes in pink when you touch it to indicate it can be operated. You can then drag the slider on the display or turn the [TOUCH AND TURN] knob to adjust the setting. 䐣 1 Cancel button Pan slider Discards any changes you made and returns to the previous screen. Balance slider 2 OK button Saves the changes you made. Description Flashes in pink when you touch it to indicate it can be operated by the [TOUCH AND TURN] knob. Edit icon Displays the screen where you can edit information, such as the keyboard screen. Menu Touch a button with "M" displayed on it to display the menu. Text box When you touch a text box that can accept values, it flashes in pink to indicate that its content can be changed. Touch the box again to display the screen that allows you to enter values. You can also change the value by turning the [TOUCH AND TURN] knob. When you touch a text box that can accept text, the keyboard screen is displayed. On and off Switches between on and off when you touch the item. 3 Title field Enter the name of the Scene here. 4 Comment field Enter comments about the Scene here. 5 Keyboard Touch to enter the desired text. Menu Displays a menu of options available in the current screen. The content of the menu varies depending on which screen is being displayed. For information about each menu, refer to the description for the corresponding page. When on (example): When off (example): - 10 - TF Series Reference Manual Toolbar Toolbar SCENE screen Provides access to frequently used features and system settings. The toolbar is displayed regardless of the screen content. ձ ղ ճ մ յ ն Allows you to manage previously saved mixer setups, or "Scenes". When you recall a Scene, you can exempt certain settings from being replaced by the settings contained in the Scene; this is called "recall safe". շ 䐟 䐠 1 Displays the SCENE screen. 2 Displays the METER screen. (page 13) 3 Displays the RECORDER screen. (page 14) 4 Displays the MONITOR screen. (page 18) 5 Displays the SETUP screen. (page 21) (V3.0 and later) 6 Displays the current time. (page 36) 7 Displays the LOGIN screen. (page 38) (V3.0 and later) The name of the user that is currently logged in is displayed with the icon. Additionally, the following items may be displayed to indicate the corresponding status. ACCESS: The console is accessing the USB storage device that is connected to its USB connector. CUE: The cue is turned on. OSCILLATOR: The oscillator is turned on. Quick Config: Quick Config is being used. (V2.0 and later) Displaying configuration screens 䐡 䐢 䐣 1 Scene list selection button Allows you to switch between the available Scene lists. SCENE A: Displays Scene list A. SCENE B: Displays Scene list B. 2 Scene list When you touch an icon, the corresponding configuration screen is displayed. To return to the previous screen, touch the icon again, or touch the close button ([X]) in the upper right of the screen. Displays the Scenes saved in the selected Scene list. You can click a header in the list to sort the items by that header. (List items cannot be sorted by "Information".) To select a Scene, simply touch it. The selected Scene is highlighted, and can then be saved, recalled, or edited. A green triangle is displayed next to the Scene that is currently recalled. A lock icon is displayed or cleared each time you touch the column. When the icon is displayed, the Scene is write-protected. The date on which the Scene was last saved is displayed in the Date column. - 11 - TF Series Reference Manual Toolbar 3 Store button Saves the current mixer setup and assigns it to the Scene number selected in the Scene list. Touch this button to display the keyboard so you can edit the title and comment. (Keyboard screenpage 10) Recalling a Scene 1. Touch a Scene list selection button to select the Scene list that contains the desired Scene. The Scene list is displayed. 2. Touch the desired Scene. 4 Recall button The selected Scene is highlighted. Recalls the Scene that is selected in the Scene list. You can click a header in the list to sort the items by that header. (List items cannot be sorted by "Information".) 5 Edit button Touch this button to display the keyboard so you can edit the title and comment. (Keyboard screenpage 10) Selected Scene Saving the current settings as a new Scene 1. Touch the Scene area of the Toolbar. 2. Touch a Scene list selection button to select the Scene list. The Scene list is displayed. 3. Touch a blank Scene. 3. Touch the Recall button. The mixer settings saved in the Scene are recalled. The name of the recalled Scene is displayed in the upper left of the screen. Blank Scene Editing a Scene 4. Touch the Store button. Display the keyboard so you can edit the title and comment (Keyboard screenpage 10). 1. Select the Scene that you want to edit. 2. Touch the Edit button. Display the keyboard so you can edit the title and comment (Keyboard screenpage 10). Enter the new Scene name and a comment. 5. Touch the OK button. The settings will be saved as a new Scene. Edit the desired items. 3. Touch the OK button. The settings will overwrite the Scene selected in the Scene list. - 12 - TF Series Reference Manual Toolbar METER screen SCENE screen menu Press the Menu key ( ) from the Scene screen to display the following items. 1 Copy ձ Displays the input and output level of all the channels, and allows you to select the metering point (i.e., the point at which the level is detected). Copies the selected Scene. ձ ղ ճ 2 Cut ղ Cuts the selected Scene. 3 Paste Pastes the copied or cut Scene to the Scene list. ճ 4 Delete Deletes the selected Scene. մ մ յ 1 Input metering point selection menu Select the input level metering point from the menu. PRE HPF: After the head amp; before the HPF PRE FADER: Before the fader POST ON: After the [ON] key 2 Output metering point selection menu Select the output level metering point from the menu. PRE EQ: Before the EQ PRE FADER: Before the fader POST ON: After the [ON] key 3 Peak Hold button Turn this button on to hold the peak level for each level meter. Turn this button off to remove the peak level that was being held. The Peak Hold on/off setting affects both input and output channels. NOTE You can assign the Peak Hold button to a [USER DEFINED KEY]. (page 29) - 13 - TF Series Reference Manual Toolbar 4 Meters RECORDER screen (INPUT/OUTPUT/TITLE LIST screen) Display the input and output levels of the channels. 5 Meter display selection button Allows you to select how many meters are displayed. Three display modes are available. մ յ մ յ մ You can connect a USB storage device to the console's iPad connector and use the console to record audio to the device, play back audio files stored on the device, and manage audio files stored on the device. When a USB storage device is connected to the iPad connector, your TF series console can record its internal signals to the device as an audio file and play back files that are stored on the device. You can also connect an iOS device to the console and use your iPad or iPhone as an audio input source for the mixer. Recorded files are formatted as 48 kHz, 24-bit stereo WAV files. Playback is supported for WAV and MP3 (MPEG-1 Audio Layer-3) files. These features allow you to record signals from the STEREO and AUX buses to the USB storage device, and use audio files that are saved on your iPad or USB storage device as the source for the console's ST IN 1 channel. NOTE • Simultaneous recording and playback is not supported. • While recording, the signal being recorded cannot be used as an INPUT channel. • Compatible USB storage devices must be formatted in FAT32. If necessary, connect the device to the USB connector (on the right side of the top panel) and use the contextual menu in the SAVE/LOAD screen to format the device. • Use only USB storage devices with a sector size of 512 bytes. (Certain large-capacity hard disk drives may not be compatible with the console.) • USB storage devices with an allocation unit size under 4096 bytes are not supported. (This may apply to small-capacity USB memory devices.) • For recording, we recommend using a high-speed device, such as a hard disk drive (HDD) or solid-state drive (SSD). USB memory devices and iOS devices can be used for playback only. • For playback, MP3 files must be encoded at 44.1 kHz or 48 kHz, with a bit rate of 128 kbps–320 kbps. Files encoded using variable bit rate (VBR) can be played back, but file length and elapsed playback time may not be displayed properly. յ - 14 - TF Series Reference Manual Toolbar NOTE INPUT/OUTPUT screen When an iPad or other iOS device is connected, "iOS device is connected. Use transport control on the device." is displayed, and the playback button is not displayed. Use the corresponding app on the iOS device to control playback. Allows you to configure inputs and outputs for playback and recording. ձ ղ ճ յ ն մ շ 1 RECORD source selection menu Allows you to select the source that will be recorded. The source selected here is also output to CH33 and CH34 of the USB TO HOST connector. Setting the input 1. Touch the RECORD source selection menu and select the source you want to record. 2 RECORD level meter Displays the recording level. 3 RECORD level slider Adjusts the recording level. 4 RECORD CUE button Turns the recording source cue on and off. 2. Drag the RECORD level slider and adjust the recording level. 5 PLAYBACK level meter Displays the playback level. 6 PLAYBACK level slider Adjusts the playback level. 7 PLAYBACK CUE button Turns the playback source cue on and off. RECORD level slider - 15 - TF Series Reference Manual Toolbar 3. If you want to monitor the record source, touch the RECORD CUE button to turn the cue on. TITLE LIST screen When a USB storage device is connected to the console via the iPad connector, you can use this screen to play back audio files saved on the device and record the signal from the 2MIX source to the device. Setting the output ձ 1. Drag the PLAYBACK level slider and adjust the playback level. ղ ճ մ PLAYBACK level slider 2. Touch the PLAYBACK CUE button to turn the cue on. յ ն շ ո չ պ ջ ռ ս 1 Parent directory button Displays the directory that is one level above the current directory. 2 Current directory Displays the path of the current directory on the USB storage device. 3 USB storage device information Displays the volume name of the USB storage device. The amount of available space (i.e., available capacity and available percentage of total capacity) on the USB storage device is also displayed. 4 File list Displays a list of the files in the current directory. You can click a header in the list to sort the items by that header. Touch a file name to select the file for playback or editing. Touch the music note icon to start and pause playback. Files whose checkboxes are turned on will be played back-to-back during continuous playback. The name of each file in the directory is displayed in the File Name column. Artist information is displayed in the Artist column (MP3 files only) and the length of the file is displayed in the Time column. - 16 - TF Series Reference Manual Toolbar 5 Follow playback button NOTE When this button is turned on during continuous playback, the file that is currently playing is highlighted in the file list. When an iPad or other iOS device is connected, "iOS device is connected. Use transport control on the device." is displayed, and the playback button is not displayed. Use the corresponding app on the iOS device to control playback. 6 File information When playing back an MP3 file, the file's bit rate and the current playback location are displayed here. When playing back a WAV file, the file's sample rate and the current playback location are displayed here. When recording, the WAV file's sample rate and the elapsed recording time are displayed here. 7 Playback mode selector button You can select the desired playback mode. Touch the button to toggle through the available modes. : SINGLE playback; the file is played and then playback stops. : SINGLE REPEAT; the file plays repeatedly until you stop playback. : ALL; all files with checkboxes turned on in the file list are played back one after another, and then playback stops. : ALL REPEAT; all files with checkboxes turned on in the file list are played back one after another, and then playback repeats until you stop playback. Recording 1. Connect a compatible USB storage device to the iPad connector. 2. Touch the record button. 8 Previous button The record button begins flashing to indicate that the console is in record-ready mode. Moves the playback location to the beginning of the current file or to the beginning of the previous file. 9 Stop button Stops playback and recording. 0 Play/pause button Starts and pauses playback. 3. When you're ready to start recording, touch the play/pause button. The record button remains lit during recording. You can touch the play/pause button to pause and resume recording. 4. When you're ready to stop recording, touch the stop button. The recorded file is named automatically based on the console's date and time setting. 5. If necessary, touch the file name edit button and change the file name. A Next button Moves the playback location to the beginning of the next file. B Record button Sets the console to record-ready mode. C File name edit button Allows you to edit the file's name. - 17 - TF Series Reference Manual Toolbar MONITOR screen Playing back files stored on a USB storage device 1. Touch the file that you want to play in the file list. To play a file stored in a different directory, touch the parent directory button and navigate to the desired directory. Parent directory button Selected file Allows you to manage cue and monitor signals and to control oscillators. The CUE/MONITOR screen is used to control the signals that are monitored using headphones and near-field monitors. Here you can select the sources that will be continuously monitored, and select individual channels for monitoring using the CUE feature. The OSCILLATOR screen is used to configure the oscillator and turn it on and off. The console has a built-in oscillator that can output a sine wave or pink noise to the desired bus, allowing you to check external devices or test the characteristics of a venue. CUE/MONITOR screen Allows you to monitor certain inputs using headphones or speakers. You can select which sources will be monitored, change the monitor signal to mono, or add a delay. ձ 2. Touch the playback mode selector button and select the desired mode. 3. Touch the play button. ղ ճ մ յ Playback mode selector button Play button Playback begins. ն RECORDER screen menu Press the Menu key ( շ ) from the RECORDER screen to display the following items. 1 Make Dir Makes a new directory in the current directory. ո 2 Delete ձ Deletes the selected file. պ չ 1 CUE mode button Used to select the CUE mode. Mix CUE: Enables cue for multiple channels. Last CUE: Enables cue for the last channel selected. ղ 2 CUE point selection buttons Selects the point in the signal path that will be monitored. PFL: Before the fader AFL: After the fader (inputs are PFL only) 3 Mono button Allows you to change the monitor signal to mono. - 18 - TF Series Reference Manual Toolbar 4 Delay button Checking the input signals Delays the monitor signal. 1. Touch a CUE mode button to select the desired cue mode. 5 Monitor output button Turns the monitor output on and off. The signal is output from the [PHONES] jack regardless of this setting. 2. Select the desired monitor sources by touching the corresponding monitor selection buttons. 6 Monitor level meter Displays the monitor level. 7 Monitor level slider 3. Select the desired cue point by touching the corresponding CUE point selection button. 4. Touch the monitor output button to turn the monitor output on and off. Adjusts the monitor output level. The signal is output from the [PHONES] jack regardless of this setting. 8 Clear CUE button Cancels all cue selections. 9 Delay setting Determines the delay time by specifying distance (meters or feet) or time (milliseconds). Touch a text box to display the keyboard and enter a value. (page 10) 5. Drag the monitor level slider to adjust the monitor level. 0 Monitor selection buttons Allow you to select the sources that will be monitored. TF5/TF3/TF1 Monitor level slider TF-RACK 6. Select the desired delay time. Touch one of the delay setting text boxes to display the keyboard. You can set the delay time by specifying distance (meters and feet) or time (milliseconds). Delay button 7. Touch the delay button. The delay is turned on. - 19 - Delay setting Text boxes TF Series Reference Manual Toolbar 6 Oscillator assignment buttons OSCILLATOR screen Determine which channels the oscillator is sent to. You can select multiple channels. Allows you to configure the oscillator. ձ ղ ճ Setting the oscillator 1. Touch the oscillator mode button and select the desired mode. 2. Use the oscillator assignment buttons to determine which channels the oscillator signal will be sent to. Channel is selected մ ն յ 1 Oscillator mode button 3. Touch the oscillator output button to turn on the oscillator output. 4. While referring to the oscillator output level meter, drag the oscillator level slider to adjust the oscillator output level. Allows you to select the oscillator mode. SINE WAVE: A sine wave will be output continuously. PINK NOISE: Pink noise will be output continuously. BURST NOISE: Pink noise will be output intermittently. 2 Parameter sliders Allows you to adjust parameters for the oscillator. When the oscillator mode is set to SINE WAVE, this setting determines the frequency of the sine wave. When the oscillator mode is set to BURST NOISE, this setting determines the Width (duration of the noise) and Interval (length of silence between noise bursts). When the oscillator mode is set to PINK NOISE, nothing is displayed here. Oscillator output button When the oscillator mode is set to SINE WAVE, you can also adjust the frequency of the oscillator. When the oscillator mode is set to BURST NOISE, you can also adjust Width (duration of each noise burst) and the Interval (duration of each silence between noise bursts). Oscillator level slider 3 Oscillator output button Turns the oscillator output on and off. When the oscillator is turned on, the oscillator signal is sent to the input channels that are selected by the oscillator assignment buttons. Oscillator output meter 4 Oscillator output level slider Adjusts the oscillator output level. 5 Oscillator output meter Displays the oscillator output level. - 20 - TF Series Reference Manual Toolbar 9 +48V Master button SETUP screen (V3.0 and later) Allows you to configure general mixer settings, as well as settings for OMNI OUT, Recall Safe, [USER DEFINED KEYS], [USER DEFINED KNOBS], custom fader banks, and other preferences. յ ն ո ձ ճ ղ Master button that turns the console's phantom power feature on and off. When this button is turned off, phantom power will not be supplied to any channels, even if their +48V buttons are turned on. (page 47) 0 Brightness icon (page 35) Displays the BRIGHTNESS screen. մ A Network icon (page 35) Displays the NETWORK screen. B Time icon (page 36) Displays the TIME screen. C Log icon (page 37) Displays the LOG screen. շ D Help icon (page 37) Displays the HELP screen. չ E About icon (page 38) Displays the ABOUT screen. պ ջ ռ ս վ տ 1 Bus Setup icon (page 22) Displays the BUS SETUP screen. 2 OMNI OUT icon (page 22) Displays the OMNI OUT screen. 3 Slot Setup icon (page 23) (V2.0 and later) Displays the SLOT SETUP screen. 4 Recall Safe icon (page 25) Displays the RECALL SAFE screen. 5 Save/Load icon (page 26) Displays the SAVE/LOAD screen. 6 Preference icon (page 28) Displays the PREFERENCE screen. 7 User Defined Control icon (page 29) Displays the USER DEFINED CONTROLS screen. 8 Custom Fader Bank icon (page 34) Displays the CUSTOM FADER BANK screen. - 21 - TF Series Reference Manual Toolbar BUS SETUP screen OMNI OUT screen Allows you to configure bus settings. You can change basic settings such as stereo/mono, Pan Link, etc. These settings are included when saving a Scene. ձ ղ Allows you to configure the output channels that are sent to the OMNI OUT jacks. ղ ճ ձ մ 1 OMNI OUT1–16 buttons Allows you to select which OMNI OUT jack will be configured. The name of the channel currently assigned to each OMNI OUT jack is also displayed in the buttons. 1 AUX1/2–AUX7/8 signal type buttons Determines how each pair of buses is processed. You can set each pair to be either Stereo (an odd and even numbered bus are paired and main parameters are shared between the two) or MONO x2 (two independent mono channels). 2 Output channel buttons Determines which output channel or monitor output will be assigned to the OMNI OUT jack you selected for 1. If you select None, nothing will be output to the corresponding OMNI OUT jack. 2 AUX1/2–AUX7/8 Pan Link buttons Turns pan link on and off for AUX1/2–AUX7/8. These buttons are only displayed if the Signal Type of the corresponding bus is set to Stereo. When these buttons are turned on, the pan setting of signals sent from input channels to the corresponding two buses will link with the Stereo bus pan setting. OMNI OUT screen menu Press the Menu key ( 3 AUX9/10–AUX19/20 Pan Link buttons ) from the OMNI OUT screen to display the following items. 1 Clear All Turns pan link on and off for AUX9/10–AUX19/20. Clears all assignments for each OMNI OUT jack (all will be set to None). 4 STEREO/SUB Level Link button (V1.1 and later) When turned on, the levels of the STEREO channel and the SUB channel are linked. For V3.0 and later, when turned on, the gain for both channels can be adjusted together but the difference in gain between the two channels is maintained. Additionally, for TF5/TF3/TF1, you can adjust the difference in gain between the two channels by adjusting the faders while pressing the [SEL] key on the panel. - 22 - ձ TF Series Reference Manual Toolbar If Dante Device Lock has been enabled for the corresponding Tio1608-D, a lock icon is displayed on the UNIT ID button. (V3.1 and later) SLOT SETUP screen (V2.0 and later) Displays settings and information related to the Tio1608-D I/O Rack that is connected to the console via the NY64-D that is installed in the expansion slot. The information that is displayed varies depending on the connection status of the Tio1608-D and the Quick Config settings. NOTE Quick Config automatically configures essential settings, making it easy to connect a Tio1608-D. It can automatically configure Dante Network settings and audio signal patching for connections between the console and up to three Tio1608-D units. For information about Tio1608-D settings, refer to the documentation for the Tio1608-D. NOTE Dante Device Lock is a feature that prevents unintended operation. Dante Controller (v3.10.0.19 and later) is required to use Dante Device Lock. 3 Quick Config status indicator Indicates the status of the Tio1608-D's [QUICK CONFIG] switch. Displayed in gray when turned off, and white when turned on. Displayed in orange if the Dante settings set by Dante Controller differ from the Quick Config settings. 4 +48V Master status indicator Indicates the status of the Tio1608-D's +48V Master switch. Displayed in gray when turned off, and red when turned on. ձ ջ ղ ճ մ յ ն 5 Version information Displays the version of the Tio1608-D firmware, as well as the Dante firmware contained in the Tio1608-D. 6 Identify button Helps you identify the connected Tio1608-D. While this button is being touched, the LED on the corresponding Tio1608-D flashes. NOTE պ շ ո If the audio signals of the Tio1608-D that corresponds to the UNIT ID button are patched, the Identify button and various information about the Tio1608-D (error details, status, and version) are displayed, regardless of the Quick Config button status. չ 1 UNIT ID button Allows you to select the unit ID of the Tio1608-D whose information is displayed. If the Tio1608-D is operating in Dante AES67 mode, "AES67" is displayed above and to the right of the unit ID. 7 Quick Config button NOTE Dante Controller (v3.10.0.19 and later) is required in order for the Tio1608-D to operate in AES67 mode. 2 SYSTEM and SYNC indicators Turns the console's Quick Config feature on and off. Displayed in gray when turned off, and white when turned on. Displayed in orange if the Dante settings set by Dante Controller differ from the Quick Config settings. For information about Tio1608-D channel support when using Quick Config, see "Quick Config Input and input channel relationships" (page 92). Display the same information as the [SYSTEM] and [SYNC] indicators on the Tio1608-D. If an error occurs, details are displayed on the UNIT ID button. - 23 - TF Series Reference Manual Toolbar 0 Channel display area NOTE • You can use Dante Controller to change Dante patches even when the Quick Config feature is enabled. However, Quick Config patching will be applied when you restart the console. If you want to use Dante Controller to change these settings, disable the Quick Config feature. • If devices that are configured by Quick Config are also locked by Dante Device Lock, a message is displayed and the Quick Config may not be implemented. (V3.1 and later) • Up to 24 I/O racks (Tio1608-D, R series, etc.) can be connected to the same Dante network. If more racks are connected, a message is displayed and the HA control may not operate properly. The following information is displayed when the console's Quick Config button is turned on and a Tio1608-D with the [QUICK CONFIG] switch turned on is connected. • CH Name • CH Color • +48V setting for each channel (the indicator below and to the left of the channel icon lights in red when turned on) 8 with OUTPUT checkbox Determines whether the Tio1608-D OUTPUT ports are connected to the console when the console is turned on and Quick Config is enabled. When the checkbox is turned on and if Quick Config is enabled, the Tio1608-D and the console are patched automatically. This checkbox can be turned on and off when the Quick Config button is turned off. A SLOT display area (V3.1 and later) Displays the status of the expansion slot. If no NY card is installed, "No Card" is displayed. NOTE • When Quick Config is enabled, only one TF series console on the network can use the Tio1608-D OUTPUT ports. If one or more other Tio1608-D units on the network have OUTPUT ports used by another TF series console, the with OUTPUT checkbox turns off automatically and a popup screen is displayed. • When the with OUPUT checkbox is turned off and you are using Dante Controller for patching, refer to "Quick Config Input and input channel relationships" (page 92) for information about output port assignments for channels. If an NY64-D is installed and Dante Device Lock has been enabled, a lock icon is displayed. 9 HA Control button Determines whether the head amp of the Tio1608-D is controlled by the console. Displayed in gray when turned off, and white when turned on. When turned off, analog gain and +48V phantom power is disabled for input channels set to SLOT, and the current setting is displayed. If the NY64-D is operating in Dante AES67 mode, "AES67" is displayed above and to the right of the SLOT display area. NOTE • When there are multiple host devices on the same network that can control the head amp, repeated operations could result, therefore we recommend having only one host device control the head amp. • Even when Quick Config is turned off, you can use Dante Controller to patch into the corresponding SLOT input channel (refer to "Quick Config Input and input channel relationships" (page 92)) and control the head amp for up to 8 I/O racks. NOTE Dante Controller (v3.10.0.19 and later) is required in order for the NY64-D to operating in AES67 mode. - 24 - TF Series Reference Manual Toolbar RECALL SAFE screen Using Recall safe function 1. Touch a channel selection button to select the channels or DCA groups that you want to configure for recall safe. Allows you to configure which items are recalled and which items are not (i.e., recall safe) when recalling Scenes and Presets. "Recall safe" allows you to select certain parameters, channels, DCA groups, etc. whose settings will not be replaced when recalling a Preset or Scene. 2. Touch the recall safe on/off buttons according to the items you want to make recall safe. ձ ղ ճ Recall safe on/off buttons 3. Touch the SAFE buttons for each channel to enable or disable the settings you made above. 4. Touch the [X] button to close the screen, and proceed to recall the desired Preset or Scene. մ 1 Channel selection buttons Allows you to select which types of channels will be configured. When you select a channel type, the different parameters that can be configured as recall safe are displayed. SAFE buttons 2 Parameter names Touch the M button to turn SAFE parameters on and off for all channels of the same type. The M button turns green when all SAFE parameters are turned on. If turned off for a parameter on all channels, it is displayed in gray. Finally, if recall safe is turned on for a parameter but not for all channels, the M button under the parameter name is displayed in blue. 3 Recall safe on/off buttons Turns recall safe on and off for the corresponding parameter. When turned on, the corresponding parameter is recall safe, i.e., its setting will not be changed when a Preset or Scene is recalled. For OMNI OUT assignments, recall safe can be turned on and off for OMNI OUT PATCH only. 4 Channel information Displays the channel ID, name, and icon. Touch the SAFE button to turn safe recall on and off for the corresponding channel. When turned on, parameters whose recall safe on/off buttons are in the "on" position will not be recalled. - 25 - TF Series Reference Manual Toolbar 5 Edit button SAVE/LOAD screen Allows you to edit the selected file's file name and comment. Displays a list of saved directories and files. ձ 6 Load button ղ Loads the file selected in the file list. The LOAD SELECT screen is displayed when you press the Load button. (V2.0 and later) ճ 7 Save button Saves the current settings by overwriting them over the file selected in the file list. 8 Save As button Saves the current settings by saving them as a new file. SAVE/LOAD screen menu Touch the Menu key ( մ ) from the SAVE/LOAD screen to display the following items. 1 Copy ձ Copies the selected file. 2 Paste ղ ո շ ն Pastes the file into the current directory. 3 Make Dir յ ճ 1 Parent directory button Displays the directory that is one level above the current directory. This button is grayed out if the current directory is the top directory. մ 2 Current directory Displays the name of the current directory. յ 3 Volume name Creates a new directory. 4 Delete Deletes the selected file. 5 Format Formats the USB storage device that is connected to the console. Displays the volume name of the USB storage device and the amount of available space. 4 File list Displays a list of the directories and files stored on the USB storage device. When an item in the file list is selected, it is highlighted to indicate it will be the subject of any subsequent operations. You can touch a header in the list to sort the items by that header. Touch the same header again to switch between ascending and descending order. File Name: Displays directory and file names. An icon is displayed for each item so that you can distinguish between the two. Comment: Displays any comments you have entered for TF Series console files. To edit a file's comment, select the file and then touch the Edit button to display the keyboard (page 10). Date: Displays each item's modified date. - 26 - TF Series Reference Manual Toolbar Data that can be saved and loaded LOAD SELECT screen (V2.0 and later) The following data can be saved and loaded on the SAVE/LOAD screen. Allows you to select which data is loaded when you load a TF Series setup file. Data that is saved/loaded Description Scene Memory All Scenes and the current Scene Channel Library All channel Presets +48V Master ձ Mute Safe Mute Master ղ Cue Except channel cue settings Oscillator Except oscillator on Monitor Meter Recall Safe User Defined Keys User Defined Knobs Foot Switch ճ Custom Fader Bank մ 1 All/Custom selection button Allows you to select the type of data that will be loaded. When All is selected, all data will be loaded. When Custom is selected, the checkboxes on this screen can be used to select the data that will be loaded. 2 Data selection checkboxes Turn on the checkboxes according to the type of data that you want to load. The User Account checkbox is displayed for both All and Custom, but you can change the checkbox setting only when you are logged in as the Administrator. 3 Load button Preference Except the following settings: Help Language, Show Help at Startup, Touch Area Optimization, [Home] Key Slot Setup Quick Config, HA Control User Account Only when logged in as Administrator Data that is not saved/loaded Description Cue Channel cue settings Oscillator Oscillator on Brightness Preference Help Language, Show Help at Startup, Touch Area Optimization settings, [Home] Key Date Time Touch this button to load the data. Network Console Lock 4 Override Protected Scenes & Libraries checkbox When this checkbox is turned on, protected Scenes and Libraries will also be overwritten by loaded data. If you want to prevent protected Scenes and Libraries from being overwritten, turn off this checkbox. Input Port Trim Output Port Trim Fader Calibration Channel Color Calibration - 27 - TF Series Reference Manual Toolbar 2 Confirmation section PREFERENCE screen Allows you to configure general operating settings regarding confirmation message display, [SEL] key behavior, etc. ձ ղ ճ մ Store/Recall: When turned on, a confirmation message is displayed when you store and recall features. INPUT Select/OUTPUT Patch: When turned on, a confirmation message is displayed when you change the input selection or OMNI OUT patching. 1 Auto CH Select section 3 Help section INPUT/OUTPUT: When turned on, a channel of the corresponding type will be selected automatically when you operate that channel's fader. You can turn this feature on and off independently for input channels and output channels. [CUE] > [SEL] LINK: When turned on, a channel will be selected when you turn its CUE on. Memorize [SEL] Position for Each FADER BANK: Determines whether channel positions are remembered in fader banks. - 28 - Help Language: Determines the language used when displaying the HELP screen. Show Help at Startup: Determines whether the HELP screen is displayed automatically after the console starts up. TF Series Reference Manual Toolbar 4 Others section USER DEFINED CONTROLS screen This screen allows you to assign features to the [USER DEFINED KEYS], [USER DEFINED KNOBS], and to the footswitch. ձ Touch Sensing Area Optimization: Allows you to optimize the touchscreen's sensitivity. Stand: Optimized for operating the touchscreen when you are positioned above it, such as when standing. Sit: Optimized for operating the touchscreen when you are positioned below it, such as when sitting. [TAP] Key Blink (V2.0 and later): Allows you to turn the flashing [TAP] key on or off. The [TAP] key can be used to tap the tempo even when the flashing is turned off. Display Delay Scale (V2.5 and later): You can select the desired units (meters, feet, milliseconds) that are displayed in the MATRIX channel DELAY box. [HOME] Key (V3.0 and later): Allows you to choose what is displayed when you press the Home key ( ) to display the OVERVIEW screen. You can choose CH Strip, Fader, or Both. When Both is selected, you can switch between the CH STRIP section and FADER section by pressing the Home key ( ). ճ յ ղ 1 Keys button Allows you to assign features to the [USER DEFINED KEYS] on the top panel. 2 Key setup buttons (A–F) Touch the desired button to display the screen that allows you to assign features to the corresponding key. Features that can be assigned to [USER DEFINED KEYS] FUNCTION No Assign PARAMETER1 Brightness Bank Change CH ON Configuring settings in the PREFERENCE screen 1. Use the buttons on the PREFERENCE screen to configure the settings as desired. 2. When finished, touch the close button ([X]). - 29 - Specific CH PARAMETER2 Description No feature is assigned Switches the brightness setting bank. This feature is supported from V1.1. CH 1–40, ST IN 1, ST IN 2, FX 1, FX 2, DCA 1–8, AUX 1–8, AUX 9/10–19/20, STEREO, SUB MATRIX1–4 (V2.5 and later) Turns the channel assigned to PARAMETER 2 on and off. TF Series Reference Manual Toolbar FUNCTION PARAMETER1 Inc Dec CH Select Specific CH CUE Specific CH Effect Bypass EQ Band Select Help Meter Monitor PARAMETER2 CH 1–40, ST IN 1L–ST IN 2R FX1L–FX2R, AUX 1–8, AUX 9–20, STEREO L, STEREO R, SUB MATRIX1–4 (V2.5 and later) CH 1–40, ST IN 1, ST IN 2, FX 1, FX 2, DCA 1–8, AUX 1–8, AUX 9/10–19/20, STEREO, SUB MATRIX1–4 (V2.5 and later) FX 1, FX 2, INS FX 1–6 HPF, LPF, Low, Low-Mid, High-Mid, High Peak Hold ON Output Source Select STEREO, SUB, STIN 1, STIN 2, STIN (TF-RACK), USB 33/34, Playback Oscillator On Oscillator Specific CH Page Change Bookmark with “SEL” Close Popup Play/Pause Stop Next Transport FUNCTION PARAMETER1 Inc Dec Store Recall Inc Recall Dec Recall SCENE Selects the channel assigned to PARAMETER 2. Direct Recall/ Store Description PARAMETER2 Same as the INC, DEC, STORE, and RECALL keys. Recalls the next numbered Scene. Recalls the previous numbered Scene. Recalls the Scene number assigned to PARAMETER 2. Press and hold for more than two seconds to assign the current settings to that Scene number. A00–99, B00–99 3 Knobs button Turns the cue on and off for the channel assigned to PARAMETER 2. Allows you to assign features to the [USER DEFINED KNOBS]. Bypasses the effect assigned to PARAMETER 2. ճ Selects the band assigned to PARAMETER 2. (V3.0 and later) Displays help information. Turns the peak hold on and off. Turns the monitor out on and off. Selects the monitor source assigned to PARAMETER 2. Turns the oscillator on and off. AUX 1–20, STEREO L, STEREO R, SUB Bookmark Recorder Description Select channels in order of the direction selected for PARAMETER 1. Previous Rec Auto Rec Rec & Start Turns the oscillator sent to the channel assigned to PARAMETER 2 on and off. Press and hold for more than 2 seconds to bookmark the current screen. Press and hold for less than two seconds to display the bookmarked screen. The selected channel is saved with the bookmark. Same as above. Closes the popup screen. Same as the Play/Pause button on the RECORDER screen. Same as the Stop button on the RECORDER screen. Same as the Next button on the RECORDER screen. Same as the Previous button on the RECORDER screen. Same as the Rec button on the RECORDER screen. Recording stops and the file is saved, and then recording resumes immediately as a new file. Recording starts immediately without entering record-ready mode. մ Knob setup buttons 4 Knob setup buttons - 30 - Touch the desired button to display the screen that allows you to assign features to the corresponding [USER DEFINED KNOBS]. Features that can be assigned to [USER DEFINIED KNOBS] Features No Assign Description No feature is assigned CH Name Adjusts the brightness of the CH NAME. (TF5/TF3/TF1 only) CH Color Adjusts the brightness of the CH COLOR indicator. (TF5/TF3/TF1 only) Screen Adjusts the brightness of the touchscreen. Panel Adjusts the brightness of the panel LEDs. CH Level Specific CH Adjusts the level of the channel assigned to PARAMETER 2. (V3.0 and later) CH Select Inc/Dec Selects the channel. (V3.0 and later) Brightness Monitor Level Adjusts monitor level. TF Series Reference Manual Toolbar Features Selected CH Features that can be assigned to the footswitch Description CH Level Adjusts the level of the selected channel. (V3.0 and later) Comp 1-knob/Thr Adjusts 1-knob or threshold for the selected channel's COMP. When 1-knob COMP is turned on, adjusts 1-knob; when 1-knob COMP is turned off, adjusts threshold. Digital Gain Adjusts the DIGITAL GAIN of the selected channel. (V3.0 and later) EQ 1-knob/Gain Adjusts 1-knob or gain for the selected channel's EQ. When 1-knob EQ is turned on, adjusts 1-knob; when 1-knob EQ is turned off, adjusts gain. EQ Band Select Selects the band for the selected channel. (V3.0 and later) EQ Frequency Adjusts EQ frequency for the selected channel. EQ Q Adjusts EQ Q for the selected channel. Gate Threshold Adjusts gate threshold for the selected channel. HPF Adjusts HPF for the selected channel. Turn the knob to adjust the frequency. Input Gain Adjusts analog gain or digital gain for the selected channel. When the channel's input is an analog source, adjusts analog gain. When the channel's input is a digital source (i.e., USB, iPad, or STIN), adjusts digital gain. Send Level Adjusts the send level to the bus selected for PARAMETER2 (FX, AUX, SUB) for the selected channel. (V3.0 and later) Pan/BAL Adjusts pan or balance for the selected channel. FUNCTION No Assign Brightness CH ON PARAMETER1 Bank Change Specific CH Inc Dec CH Select Specific CH Clear Cue 5 Foot Switch button Allows you to assign features to the footswitch. յ CUE Specific CH Effect Bypass EQ Band Select Help Meter Monitor Mute Master Oscillator ն Foot Switch setup button 6 Foot Switch setup button Peak Hold ON Output Source Select Input FX Oscillator On Specific CH Bookmark Displays the features that can be assigned to the footswitch. Page Change Bookmark with “SEL” Close Popup - 31 - PARAMETER2 Description No feature is assigned Switches the brightness setting bank. This feature is supported from V1.1. CH 1–40, ST IN 1, ST IN 2, FX 1, FX 2, Turns the channel assigned to PARAMETER 2 DCA 1–8, AUX 1–8, on and off. AUX 9/10–19/20, STEREO, SUB MATRIX1–4 (V2.5 and later) Select channels in order of the direction selected for PARAMETER 1. CH 1–40, ST IN 1L–ST IN 2R, FX1L–FX2R, Selects the channel assigned to AUX 1–8, AUX 9–20, PARAMETER 2. STEREO L, STEREO R, SUB MATRIX1–4 (V2.5 and later) Clears all cue selections. Same as the CLEAR CUE key on the top panel. CH 1–40, ST IN 1, ST IN 2, FX 1, FX 2, Turns the cue on and off for the channel DCA 1–8, AUX 1–8, assigned to PARAMETER 2. AUX 9/10–19/20, STEREO, SUB MATRIX1–4 (V2.5 and later) FX 1, FX 2, Bypasses the effect assigned to PARAMETER 2. INS FX 1–6 Selects the band assigned to PARAMETER 2. HPF, LPF, Low, Low-Mid, High-Mid, High (V3.0 and later) Displays help information. Turns the peak hold on and off. Turns the monitor out on and off. STEREO, SUB, ST IN 1, ST IN 2, Selects the monitor source assigned to STIN (TF-RACK), PARAMETER 2. USB 33/34, Playback Same as the corresponding MUTE key on the top panel. Turns the oscillator on and off. AUX 1–20, Turns the oscillator sent to the channel STEREO L, STEREO R, assigned to PARAMETER 2 on and off. SUB Press and hold for more than 2 seconds to bookmark the current screen. Press and hold for less than two seconds to display the bookmarked screen. The selected channel is saved with the bookmark. Same as above. Closes the popup screen. TF Series Reference Manual Toolbar FUNCTION PARAMETER1 PARAMETER2 Play/Pause Stop Next Recorder Transport Previous Rec Auto Rec Rec & Start SCENE Inc Dec Store Recall Inc Recall Dec Recall Direct Recall/ Store TAP TEMPO Description Same as the Play/Pause button on the RECORDER screen. Same as the Stop button on the RECORDER screen. Same as the Next button on the RECORDER screen. Same as the Previous button on the RECORDER screen. Same as the Rec button on the RECORDER screen. Recording stops and the file is saved, and then recording resumes immediately as a new file. Recording starts immediately without entering record-ready mode. Assigning a feature to a [USER DEFINED KEY] 1. Touch the Keys button. The screen where you can select the desired [USER DEFINED KEY] is displayed. Buttons A–F correspond to [USER DEFINED KEYS] A–F. 2. Touch the Key button that corresponds to the [USER DEFINED KEY] that you want to configure. The configuration screen is displayed. Same as the INC, DEC, STORE, and RECALL keys. A00–99, B00–99 Recalls the next numbered Scene. Recalls the previous numbered Scene. Recalls the Scene number assigned to PARAMETER 2. Press and hold for more than two seconds to assign the current settings to that Scene number. Same as the TAP key on the top panel. Feature assignment screen When you select a Function, the items available for Parameter 1 are displayed. Likewise, when you select an item for Parameter 1, the items available for Parameter 2 are displayed. Some Functions may not have items available for Parameter 1; some Parameter 1 items may not have items available for Parameter 2. 3. Scroll through the Function list and select the desired feature. 4. Scroll through the Parameter 1 list and select the desired item. If items are available in the Parameter 2 list, select the desired item. 5. Touch the OK button. - 32 - TF Series Reference Manual Toolbar Assigning a feature to a [USER DEFINED KNOB] Assigning a feature to the footswitch 1. Touch the Knobs button. 1. Touch the Foot Switch button. 2. Touch the Foot Switch setup button. The screen where you can select the desired [USER DEFINED KNOB] is displayed. The configuration screen is displayed. Buttons A–D correspond to [USER DEFINED KNOBS] A–D. 2. Touch the Knob button that corresponds to the [USER DEFINED KNOB] that you want to configure. The configuration screen is displayed. 3. Scroll through the Function list and select the desired feature. 3. Scroll through the Function list and select the desired feature. 4. Scroll through the Parameter 1 list and select the desired item. If items are available in the Parameter 2 list, select the desired item. 5. Touch the OK button. 4. Scroll through the Parameter 1 list and select the desired item. If items are available in the Parameter 2 list, select the desired item. 5. Touch the OK button. - 33 - TF Series Reference Manual Toolbar CUSTOM FADER BANK screen Configuring the custom fader bank The custom fader bank allows you to choose different channels, regardless of type (input channels, AUX buses, MATRIX (V2.5 and later), DCA groups, etc.), and group them into a bank of faders. 1. Touch a fader button to select the fader that you want to configure. ղ 2. Touch the desired the channel button according to which channel you want to assign to the fader you selected in step 1. 3. Repeats steps 1–2 and configure other faders as desired. ձ 1 Fader buttons Allow you to select which fader will be configured. CUSTOM FADER BANK screen menu Touch the Menu key ( items. ) from the CUSTOM FADER BANK screen to display the following 2 Channel buttons 1 Clear All Determines which channel will be assigned to the fader you selected for 1. If you select None, nothing will be assigning to the corresponding fader. Clears all assignments for each fader bank (all will be set to None). ձ Recalling the CUSTOM FADER BANK (TF5/TF3/TF1) 1. Press the [INPUT2] and [OUTPUT] keys on the top panel at the same time. - 34 - TF Series Reference Manual Toolbar 2 Power Saving Mode button BRIGHTNESS screen Allows you to adjust the brightness of the touchscreen, as well as the LEDs, name display, and channel colors on the top panel. You can save brightness settings into BANK A and BANK B, allowing you to recall the desired brightness settings to suit your work conditions. TF5/TF3/TF1 ձ ղ Allows you to set the amount of time that passes before console switches to power saving mode. You can choose 30 seconds, 2 minutes, 5 minutes, 10 minutes, 15 minutes, or never. 3 Screen brightness slider Adjusts the brightness of the touchscreen. 4 Panel brightness slider Adjusts the brightness of the LEDs on the top panel. 1–10: In low lighting conditions, an auxiliary light lights, which makes the key top easier to read. 11–20: In bright lighting conditions, an auxiliary light does not light, which helps emphasize contrast. ճ 5 CH Name brightness slider (TF5/TF3/TF1) Adjusts the brightness of the channel names displayed on the top panel. մ 6 CH Color brightness slider (TF5/TF3/TF1) յ Adjusts the brightness of the channel colors on the top panel. ն TF-RACK ձ NETWORK screen ղ Allows you to configure the console's network address, which is needed when you connect a computer to the NETWORK connector. Configure these settings according to the connected computer or network. NOTE When connecting the console to a LAN, refer to the TF Editor Installation Guide. ձ մ ղ ճ մ ճ 1 Bank selection buttons Allow you to switch between BANK A and BANK B. BANK A: Selects BANK A brightness settings. BANK B: Selects BANK B brightness settings. For V1.1 and later, you can switch between the banks using [USER DEFINED KEYS] or a footswitch. - 35 - յ ն TF Series Reference Manual Toolbar 1 IP address provisioning method button TIME screen Select the setting that matches how the console will configure its IP address. DHCP: The console receives its IP address automatically. Static IP: The console's IP address is set manually. Allows you to set the console's internal clock and change the date and time format. The date and time set here are used as a timestamp when saving Scenes. 2 IP Address ձ Determines the unique address that identifies the console on the network. ղ ճ մ 3 Subnet Mask Defines how many bits are used for network addresses on the connected network. 4 Gateway The address of the network device (gateway) that facilitates communication between different devices on the network. յ 5 Unit Name Allows you to specify a name that can be used to identify the console on the network. 6 PIN for MonitorMix (V1.1 and later) ն This is a 4-digit password that is required when accessing the console using the MonitorMix app. MonitorMix is an application that allows performers to adjust the levels of the monitor mix directly from the stage. 1 Date setting NOTE When the DHCP button is selected, items 2–4 are not needed. 2–4 are only needed when you select the Static IP button. Configure these parameters as needed. Determines the console's date setting. 2 Date format setting Allows you to select the date format. The following formats are available. MM/DD/YYYY DD/MM/YYYY YYYY/MM/DD 3 Region Allows you to change the region. 4 DST (+1:00) Enables daylight saving time. When turned on, the current time advances by one hour. 5 Time format setting Allows you to select the time format. 24-Hour 12-Hour (uses AM and PM) 6 Time setting Determines the console's time setting. - 36 - TF Series Reference Manual Toolbar LOG screen HELP screen When messages are displayed while using the console, they are logged by date and time and can be viewed later on this screen. ձ ղ Displays information about console operations. If "Show Help at Startup" is turned on in the PREFERENCE screen, the HELP screen is displayed automatically after the console starts up. You can swipe left and right to view different pages. ճ 1 Time Stamp field Displays the date and time of each message. You can touch the header to sort messages by date and time. 2 Message field Displays messages. You can touch the header to sort messages alphabetically by message. 3 Save button Allows you to save the log to a USB storage device. This button is not available when no USB storage device is connected. - 37 - TF Series Reference Manual Toolbar LOGIN screen (V3.0 and later) ABOUT screen Displays system software version information and license information. ձ ղ Allows you to assign permissions for accessing the TF series console. By limiting which parameters can be operated by different users, you can prevent improper operation and specify what guest engineers can and cannot do when operating the console. ձ ղ 1 Version button ճ 1 User icons Display the icon, name, and comments for each user. When you touch an item, the console prompts you to enter the password for the corresponding user. If there is no password assigned to a user, you can log in by simply touching the user's icon. Administrator Can use all features. Only one administrator can be configured for the console. The administrator is the only user that can set the access permissions of other users. If another user has locked the console, the administrator can release the console lock. The only setting that must be set for the administrator is the password. Guest Can use features according to the access permissions set by the administrator. Only one guest can be configured for the console. Access permissions and comments can be assigned to the guest. User Can use features according to the access permissions set by the administrator. Three users can be configured for the console. A user name, password, access permissions, and comments can be assigned to each user. Displays the console's system software version number. (V2.0 and later) Displays the Dante version of the connected NY64-D, if installed. 2 License button Displays system software license information. - 38 - TF Series Reference Manual Toolbar When setting a password for the first time, enter the desired password in the New Password text box, and then enter the password again in the Verify text box. When changing a password, enter the current password in the Old Password text box, and then set the new password. NOTE • There is no password saved for the administrator in the factory default settings. (All users have full access.) In order to set permissions for other users, you must first set a password for the administrator. • If a user with a password assigned is logged in to the console when the console is turned off, the console will prompt the user to enter that password when the console is turned on the next time. If another user wants to log in, press the cancel button when prompted to enter the password, and then select the desired user in the LOGIN screen. 2 Console lock icon Prompts you to enter the password for the current user. If the correct password is entered, the CONSOLE LOCK screen is displayed. (page 41) 4 Comment text box Displays the keyboard screen so that you can enter a comment. 3 User account icon 5 Access Permission Edit button Displays the USER ACCOUNT screen. Displays the ACCESS PERMISSION screen. When logged in as the administrator, you can set the access permissions of the selected user for each parameter. USER ACCOUNT screen (V3.0 or later) Allows the administrator to set the access permissions for the other users. ACCESS PERMISSION screen (V3.0 and later) Allows you to select which parameters can be used and not used by each user. This screen is only displayed when logged in as the administrator. ղ ճ ձ ձ մ ղ յ մ 1 User selection area ճ Allows you to select which user's settings you will configure. Information about the selected user is displayed on the right side of the screen. 2 User Name text box Displays the keyboard screen so that you can edit the user name. You cannot edit the user name of the administrator and guest accounts. 1 Selection buttons Allows you to select a channel to assign access permission to. According to which button you have selected, the different parameters that can be assigned access permissions are displayed. You can set access permissions for operations that are not associated with channels, such as the SETUP screen or the SCENE screen, by touching the GENERAL button. 3 Password Edit button Displays the keyboard screen so that you can edit the password. - 39 - TF Series Reference Manual Toolbar 2 Parameter names Touch the button to allow/restrict access to the parameters for all channels of the same type. The button turns green when access is allowed for all channels. If access is allowed for only some channels, it is displayed in blue, and if access is restricted for all channels, it is displayed in gray. 3 Access permission on/off buttons Allow (on) and restrict (off) access to the corresponding parameters. The selected user can only use the parameters that are allowed here. For details about each parameter, refer to the parameter list. (page 84) 4 Channel information Displays the channel ID, name, and icon. Touch the button to allow/restrict access to the parameters for the corresponding channel. The button turns green when access is allowed for all parameters. If access is allowed for only some parameters, it is displayed in blue, and if access is restricted for all parameters, it is displayed in gray. ACCESS PERMISSION screen menu Press the Menu key ( Applying access permissions 1. From the LOGIN screen, log in as the administrator. 2. From the LOGIN screen, touch the User Account icon to display the USER ACCOUNT screen. 3. Select the desired user, then set the user name, password, and comments. 4. Touch the Access Permission Edit button to display the ACCESS PERMISSION screen. 5. Restrict (turn off) the parameters that you do not want the user to access. 6. To confirm whether the access permissions were set as desired, return to the LOGIN screen and log in as the user you set access permissions for. 7. Operate a parameter that you restricted. "Permission Denied!" is displayed if the parameter is restricted. Resetting user settings If the console is reset, all user passwords are deleted and all restrictions are released. (page 79) ) from the ACCESS PERMISSION screen to display the following options. 1 Copy ձ ղ ճ Loading user settings to other TF series consoles 1. From the SAVE/LOAD screen, save the console's internal settings. 2. Log in as the administrator using the console to which you want load the user settings. 3. From the SAVE/LOAD screen, select the settings file you saved in step 1 and touch the Load button. 4. From the LOAD SELECT screen, select user accounts on the CUSTOM tab and touch the Load button. Copies the ACCESS PERMISSION settings of the selected user to the clipboard. 2 Paste Pastes the ACCESS PERMISSION settings in the clipboard to the selected user. 3 High Level 4 Mid Level մ յ 5 Low Level Applies ACCESS PERMISSION settings to the selected user based on their proficiency. High Level: For advanced users. Only network and clock settings are restricted. All other parameters are allowed. Mid Level: For moderately proficient users. System settings are restricted. All other parameters, such as channel operations, are allowed. Low Level: For beginners. Most parameters are restricted. Channel on/off and fader level adjustments are allowed. - 40 - TF Series Reference Manual Toolbar CONSOLE LOCK screen You can lock the console to prevent it from being operated accidentally. While the CONSOLE LOCK screen is displayed, controls are disabled and the console cannot be operated. To unlock the console, touch and hold the CONSOLE LOCK screen. If you are prompted to enter a password, enter the password of the current user or the administrator. - 41 - TF Series Reference Manual OVERVIEW screen OVERVIEW screen 4 Displays the COMP screen. (page 55) 5 Displays the FX1 screen. (page 57) 6 Displays the FX2 screen. (page 57) 7 Displays the SEND TO AUX screen. (page 62) 8 Displays the ASSIGN screen. (page 63) 9 Displays the CH VIEW screen. (page 64) Displays information about the channel strips. You can display the OVERVIEW screen by pressing the Home key ( ). For the TF5/TF3/TF1, the CH STRIP section is displayed as the home screen; for the TF-RACK, the FADER section is displayed. Additionally, for the TF-RACK, you can switch between the CH STRIP section and FADER section by pressing the Home key. NOTE For the TF5/TF3/TF1, the FADER section is displayed on the OVERVIEW screen when SETUPPREFERENCEOther[HOME] key is set to "Both". In this case, you can switch between the CH STRIP section and FADER section by pressing the Home key while the OVERVIEW screen is displayed. Stereo channels պ ճ ղ մ յ ն CH STRIP section Input channels ձ ղ շ ղ ձ ճ ո չ ղ մ ճ մ յ յ ն ն շ ն 1 Displays the INPUT screen. (page 47) 2 Displays the EQ screen. (page 49) 3 Displays the FX1/FX2 screen. (page 57) 4 Displays the SEND TO AUX screen. (page 62) 5 Displays the ASSIGN screen. (page 63) 6 Displays the CH VIEW screen. (page 64) 7 Displays the GEQ screen. (page 72) 8 Displays the COMP screen. (page 55) ո չ 1 Displays the INPUT screen. (page 47) 2 Displays the EQ screen. (page 49) 3 Displays the GATE screen. (page 53) - 42 - TF Series Reference Manual OVERVIEW screen 9 Displays the OUTPUT screen. (page 74) 0 Displays the SEND FROM screen (page 75) (V3.0 and later) 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the GEQ screen. (page 72) 4 Displays the COMP screen. (page 55) 5 Displays the OUTPUT screen. (page 74) 6 Displays the CH VIEW screen. (page 64) AUX1–AUX8 channels ձ MATRIX1–4 channels (V2.5 and later) ղ ճ մ ձ յ ղ ճ ն մ 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the GEQ screen. (page 72) 4 Displays the COMP screen. (page 55) 5 Displays the OUTPUT screen. (page 74) 6 Displays the CH VIEW screen. (page 64) յ 1 Displays the SEND FROM screen. (page 75) 2 Displays the EQ screen. (page 49) 3 Displays the DELAY screen. (page 78) 4 Displays the OUTPUT screen. (page 74) 5 Displays the CH VIEW screen. (page 64) AUX9/10–19/20 channels, SUB channel NOTE ձ ձ ղ ղ ճ ճ մ յ • MATRIX channels 1–4 are in the OUTPUT FADER BANK. To use the faders on the top panel to control these channels, press the [OUTPUT] key in the FADER BANK section, and then display the OUTPUT BANK in the channel strip. • For TF1, MATRIX channels 1–4 are not controlled by the faders, and are displayed only. Scroll the displayed area to the right. To control these channels using the faders, register them to the CUSTOM FADER BANK. յ ն ն - 43 - TF Series Reference Manual OVERVIEW screen Group channels FADER section ձ ձ ղ ճ ղ 1 Displays the DCA ASSIGN screen. (page 76) 2 Displays the CH VIEW screen. (page 64) մ 1 ON button Turns the channel on and off. 2 Fader Adjusts the channel’s fader level. 3 CUE button Turns the cue on and off for the assigned channel. 4 Displays the CH VIEW screen. (page 64) OVERVIEW screen operations When you touch an item on the screen, a pink box is displayed around the item to highlight it. When an item is highlighted, you can adjust it using the [TOUCH AND TURN] knob. If you touch a highlighted item, its configuration screen is displayed. You can drag or swipe up, down, left, and right to display other areas of the screen. - 44 - TF Series Reference Manual OVERVIEW screen OVERVIEW screen menu Press the Menu key ( 2. Press the Menu key ( ) from the OVERVIEW screen to display the following items. 3. Touch the CH Copy icon. 1 CH Copy The settings are copied and the menu closes. Copies the settings of the current channel. ձ ղ ). Displays the menu. CH Copy icon 2 CH Paste Pastes settings from another channel and applies them to the current channel. 3 CH Default Resets the settings of the current channel to their default values. 4. Select the channel that you want to apply the settings to. ճ Settings will be applied to this channel Copying settings from one channel and applying them to another channel 1. Select the channel whose settings you want to copy. Copy settings from this channel 5. Press the Menu key ( ). Displays the menu. 6. Touch the CH Paste icon. CH Paste icon - 45 - TF Series Reference Manual OVERVIEW screen The settings from the first channel you selected are applied to the second channel you selected, and then the menu closes. Paste completed - 46 - TF Series Reference Manual Configuration screens Configuration screens 2 Input selection buttons INPUT screen Allows you to select the channel's input source. The available sources depend on the channel whose settings you are editing. INPUT: The device connected to the INPUT jack will be used as the input source. USB: The computer connected to the USB TO HOST connector will be used as the input source. SLOT (V2.0 and later): Allows you to select an input from the NY64-D installed in the expansion slot. Use this button when selecting an input from a Tio1608-D or stage box connected to the NY64-D and the Dante network. See page 92 for information about SLOT port numbers and channels. Playback: Displayed for ST IN1. Allows you to select a USB storage device that is connected to the USB connector on the top panel as an input. Allows you to change the stereo link setting, select an input source, turn phantom power on and off, turn phasing on and off, and adjust input gain. ձ ղ ճ մ չ NOTE When USB is selected, the gain slider (7) adjusts digital gain, and the +48V button (8) is not displayed. When SLOT is selected, analog gain adjustment and the +48V button cannot be used if the HA Control button on the SLOT SETUP screen is not turned on. Additionally, for inputs from a device whose head amp cannot be controlled, the gain slider (7) becomes a digital gain adjustment, and the +48V button (8) is not displayed. ո շ ն Even if you select SLOT as the input source, if a source is not actually available (such as when there is no NY64-D installed, no Tio1608-D or stage box connected, no Dante patching, etc.), this "virtual HA" state is displayed in the HA box area of this screen, the OVERVIEW screen, and the CH VIEW screen. յ 1 Stereo link selection button Allows you to select whether two adjacent mono input channels are linked as a stereo pair, or behave as two separate mono channels. Touch to display the popup menu. OFF: Stereo link is disabled. CH1&2: Stereo link is enabled. When stereo link is enabled, the odd numbered channel is the left side of the stereo pair, and the even numbered one is the right. The channel numbers displayed in the popup menu depend on the channel whose settings you are editing. CH2&3: Stereo link is enabled. When stereo link is enabled, the even numbered channel is the left side of the stereo pair, and the odd numbered one is the right. The channel numbers displayed in the popup menu depend on the channel whose settings you are editing. 3 GainFinder Displays the input's gain adjusted level. When adjusting the input gain, adjust it so that the center of the GainFinder lights up. When the input source is set to INPUT, the GainFinder displays the digital input's gain. - 47 - TF Series Reference Manual Configuration screens 4 Level meter Setting stereo link and the input source Displays the gain adjusted level. 5 Digital gain text box Allows you to adjust the digital gain. It is set to 0 dB by default. You can touch the text box to highlight it, then use the [TOUCH AND TURN] knob to adjust the setting. You can also touch the text box again to adjust the setting using the keyboard screen. 1. Display the INPUT screen. (page 5) 2. Touch the stereo link selection button that corresponds to the desired setting. 6 Φ (phase) button Allows you to reverse the phase. When turned on, the input signal's phase is reversed. 7 Gain slider When the INPUT button is selected, the slider adjusts the analog gain of the head amp. The PAD (-24 dB) will be switched on or off when the analog gain is adjusted between +17 dB and +18 dB. When the USB button is selected, the slider adjusts digital gain. 3. Touch the input selection button that corresponds to the desired setting. 4. Use the gain slider to adjust the head amp gain. 8 +48V button Gain finder level display Adjust the gain slider so that the center of the GainFinder lights up. Turns phantom power (+48 V) to the head amp on and off. On: Phantom power is turned on. Off: Phantom power is turned off. When the USB button is selected, the +48V button is not displayed. NOTICE Information about phantom power When phantom power is not needed, set the +48V button to the off position. Observe the following when using phantom power to prevent damage to the console or connected devices, and signal noise. • Do not set the +48V button to the on position when the device connected to the input jack does not require phantom power. • Do not connect or disconnect cables when the +48V button is set to the on position. • Before turning phantom power on or off for a channel, first set the channel's volume to the minimum level. Gain slider 5. Touch the digital gain text box to highlight it, then use the [TOUCH AND TURN] knob to adjust the setting. NOTE When using phantom power, noise may be generated if there is a difference in the impedance between the hot and cold of the device connected to an input jack. 9 Gain Unlink button (V1.1 and later) Digital gain text boxes Displayed for stereo channels and for channels that have stereo link turned on. While you are touching the button, gain for the left and right channels can temporarily be adjusted individually. When you release the button, the gain for both channels can be adjusted together but the difference in gain between the two channels is maintained. - 48 - TF Series Reference Manual Configuration screens EQ screen INPUT screen menu (V1.1 and later) Touch the Menu key ( ) from the INPUT screen to display the following items. 1 All INPUT ձ Allows you to assign the INPUT jacks as the input source for all input channels. Controls the EQ for each channel. 4-band parametric EQ is available for CH 1–32, AUX 1–20, STEREO and MATRIX1-4; 2-band parametric EQ is available for CH 33–40, ST IN 1, ST IN 2, FX1, FX2, and SUB. You can adjust settings using 1-knob mode, which allows you to use the [TOUCH AND TURN] knob to easily adjust settings, or manual mode, which allows you to adjust each parameter individually. 2 All USB Allows you to assign the USB TO HOST connector as the input source for all input channels. ղ 4-band parametric EQ ձ 3 All SLOT (V2.0 and later) ղ ճ մ յ Switches all inputs to input sources of Dante network devices that are connected to the NY64D installed in the expansion slot. ճ The input source for the following channels will be changed. TF5: CH 1–32 (when CH 1–32 are selected) CH 33–40 (when CH 33–40 are selected) ն TF3: CH 1–24 (when CH 1–24 are selected) CH 25–32 (when CH 25–32 are selected) CH 33–40 (when CH 33–40 are selected) TF1/TF-RACK: CH 1–16 (when CH 1–16 are selected) CH 17–32 (when CH 17–32 are selected) շ ո 1 EQ button Turns the EQ on and off. 2 HPF button Turns the HPF (high-pass filter) on and off. Displayed for CH 1–40. 3 1-knob button Switches between 1-knob EQ mode and manual mode. When using 1-knob EQ mode, the 1-knob level slider is displayed. 4 1-knob level slider Adjusts the intensity of 1-knob EQ. When using manual mode, information about the selected band's Q, F, and G is displayed here. - 49 - TF Series Reference Manual Configuration screens 5 EQ mode type selection button 7 EQ graph When using 1-knob EQ mode, allows you to select the 1-knob EQ mode type. Select [Vocal] for vocal channels, otherwise select [Intensity]. When set to [Intensity], you can adjust the EQ to a setting between flat and double the intensity of the EQ settings you made using manual mode. For output channels, [Loudness] is available. This setting allows you to boost low and high tones. The available types depend on the channel whose settings you are editing. Displays the parameter settings of the EQ and filter. As you adjust the settings of each band, the results are reflected in the graph. When using 1-knob EQ mode, you can touch the level slider and then adjust the slider using the slider itself or the [TOUCH AND TURN] knob. When using manual mode, you can drag the handles displayed in the graph to adjust the corresponding settings. When HPF is turned on, you can drag the HPF handle to adjust the cutoff frequency. You can also adjust HPF independently when using the Intensity type for 1-knob EQ mode. Channel Type ○ ○ ○ ○ ○ ○ ○ × Vocal ○ ○ × × × × × × × × Loudness × × × × ○ ○ ○ ○ × Intensity <1-knob EQ mode> CH1-32 CH33-40 AUX9/10– MATRIX SUB ST IN FX STEREO AUX1-8 HPF + HPF + AUX19/20 1-4 2-band 2-band 2-band 4-band 4-band 4-band 2-band 4-band 4-band + LPF In manual mode, this button switches the filter type. Low-band and high-band filter are available. For CH 1-40, the available low-band filters are low-shelving type and bell type. For other channels (i.e., for channels that do not have an HPF), the available low-band filters are HPF, low-shelving type, and bell type. The available high-band filters are LPF, high-shelving type, and bell type. 6 EQ output level meter Displays the post-EQ level. How does 1-knob EQ mode work? 1-knob EQ mode allows you to adjust several parameters at once with just the turn of a knob. It makes EQ adjustment quick and easy. The console contains Presets that are configured for a variety of instruments. You can use 1knob EQ mode to adjust the EQ settings that are saved in Presets without disturbing the overall balance of your mix. You can even configure EQ settings using manual mode, then switch to 1-knob EQ mode and use the Intensity type to adjust the amount of EQ applied to the channel. In this case you can use the [TOUCH AND TURN ] knob to adjust from 0% (no EQ applied) to 50% (the EQ settings you made using manual mode) and 100% (double the intensity of the EQ settings you made using manual mode). This makes it very easy to fine-tune your EQ settings with just one knob. If 1-knob EQ mode type is set to Vocal or Loudness, you can adjust the EQ between 0% (no EQ applied) and 100% (maximum EQ applied). - 50 - TF Series Reference Manual Configuration screens 8 RTA/Keyboard display You can touch the bottom of the graph where no parameters are displayed to display RTA or a keyboard. RTA is a graph that displays the frequencies of the input signal after the EQ is applied. The keyboard display is helpful for understanding the relationship between frequencies and musical pitches. Adjusting EQ in manual mode 1. 2. 3. 4. Display the EQ screen. (page 5) Touch the EQ button and turn on the EQ. Touch the 1-knob button and turn 1-knob mode off. Use the handles in the EQ graph to adjust the EQ as desired. Drag to adjust When you touch an EQ parameter to select it, you can then adjust it using the [TOUCH AND TURN] knob. You can press the [SHIFT] key to switch to a different parameter. Each time you press the [SHIFT] key, you can switch between gain (G) and frequency (F). You can also switch between G and F by touching the corresponding area to the right of the 1-knob button. To adjust Q, pinch in or out on the touchscreen, or touch the Q area to the right of the 1-knob button and then use the [TOUCH AND TURN] knob to adjust the setting. 5. Turn HPF on as desired. When using a vocal mic, you can reduce low-frequency noise (rumble noise, etc.) by turning on HPF. Adjusting EQ in 1-knob EQ mode 1. 2. 3. 4. - 51 - Display the EQ screen. (page 5) Turn on the EQ and select 1-knob mode. Select the desired 1-knob mode type. Use the [TOUCH AND TURN] knob to adjust the EQ. TF Series Reference Manual Configuration screens Setting HPF Setting LPF 1. Display the EQ screen. (page 5) 2. Touch the HPF button and turn on the HPF. The SUB channel can use the LPF to cut high frequencies independent of the EQ, ideal for adjusting the signal sent to a sub-woofer. 1. Display the SUB channel's EQ screen. (page 5) 2. Touch the EQ button and turn on the EQ. 3. Touch the HPF handle. 4. Use the [TOUCH AND TURN] knob to adjust the HPF. You can also drag the HPF handle in the EQ graph. 3. Use the LPF handle in the EQ graph to adjust the LPF as desired. Drag to adjust The value that corresponds to your adjustments is displayed in the upper right of the screen. Drag to adjust Adjusted value - 52 - TF Series Reference Manual Configuration screens GATE screen EQ screen menu Press the Menu key ( ) from the EQ screen to display the following options. 1 Copy ձ ղ ճ մ Copies the EQ parameters of the selected channel to the clipboard. Allows you to configure the noise gate for each channel. When the input signal level is lower than a specified amount (threshold), the output signal is reduced by a specified amount (range). GATE is available for CH 1–32. ձ 2 Paste յ ն շ Pastes the EQ parameters in the clipboard to the selected channel. 3 Compare չ Allows you to compare the EQ parameters of the selected channel with the EQ parameters in the clipboard by switching between the two. 4 Gain Flat յ Sets the EQ gain for all bands to 0. պ 5 Default Resets EQ settings to their default values. ղ ճ մ ո 1 GATE button Turns the gate on and off. 2 Gate input level meter Displays the gate input level. 3 Threshold slider Determines the level at which the gate is applied. 4 Gate graph Displays a visual representation of the gate level. 5 Range slider Determines the amount by which the signal will be lowered when the gate is applied. 6 Attack slider When the input signal exceeds the threshold, this setting determines how quickly the gate opens. - 53 - TF Series Reference Manual Configuration screens 7 Hold slider When the input signal drops below the threshold, this setting determines how much time passes before the gate closes. GATE screen menu Press the Menu key ( ) from the GATE screen to display the following options. 1 Copy 8 Decay slider After the hold time passes, this setting determines how quickly the gate closes. The value here is expressed as the time required for the level to change by 6 dB. 9 GR (gain reduction) meter ձ ղ Displays the amount by which the signal's gain is reduced. 0 OUT (gate output) meter ճ Displays the gate output level. Copies the GATE parameters of the selected channel to the clipboard. 2 Paste Pastes the GATE parameters in the clipboard to the selected channel. 3 Compare Allows you to compare the GATE parameters of the selected channel with the GATE parameters in the clipboard by switching between the two. Setting the gate 4 Default 1. Display the GATE screen. (page 5) 2. Turn on the gate and then touch the slider that you want to adjust. մ Resets the GATE settings for the current channel to their default values. 3. Use the [TOUCH AND TURN] knob to adjust the setting. Refer to the gate graph and each meter while making adjustments. You can also drag the slider on the touchscreen to adjust the setting. - 54 - TF Series Reference Manual Configuration screens 8 Attack slider COMP screen Allows you to configure the compressor for each channel. You can adjust settings using 1knob mode, which allows you to use the [TOUCH AND TURN] knob to easily adjust settings, or manual mode, which allows you to adjust each parameter individually. ղ շ ձ ո When the input signal exceeds the threshold, this setting determines how quickly the maximum amount of compression is applied. 9 Release slider When the input signal drops below the threshold, this setting determines how much time passes before compression is no longer applied. The value here is expressed as the time required for the level to change by 6 dB. ճ չ 0 Out Gain slider Adjusts the output level. ռ A Knee button Determines how gradual or sudden the curve is at the threshold. A soft knee means that compression is applied gradually as the signal exceeds the threshold; a hard knee means a more sudden transition. ս B GR (gain reduction) meter Displays the amount by which the signal's gain is reduced. C OUT (compressor output) meter Displays the compressor output level. How does 1-knob COMP mode work? մ յ ն պ ջ 1 COMP button Turns the compressor on and off. 2 1-knob button Switches between 1-knob mode and manual mode. 1-knob COMP mode allows you to adjust the amount of compression applied to the signal with just the turn of a knob. By turning the [TOUCH AND TURN] knob to the right (or sliding the 1-knob level slider to the right), more compression is applied. In situations where raising the fader or gain could cause clipping at louder points in the signal, compression can deliver a more consistent sound. 1-knob COMP takes some of the worry out of compression by allowing you to adjust the balance between threshold, ratio, and out gain easily. 3 1-knob level slider (1-knob mode only) Adjusts the amount of 1-knob COMP applied. Not displayed during manual mode. 4 Compressor input level slider Displays the compressor output level. 5 Threshold slider Determines the level at which compression is applied. 6 Compressor graph Displays a visual representation of the current settings. 7 Ratio slider Determines the amount of compression that is applied. - 55 - TF Series Reference Manual Configuration screens Setting the compressor 2. Turn the [TOUCH AND TURN] knob. 1. Display the COMP screen. (page 5) 2. If the compressor is turned off, touch the COMP button to turn compression on. Attack, Release, and Knee settings are fixed at their current settings, and the Threshold, Ratio, and Out Gain settings are adjusted automatically. 3. Touch the 1-knob button and turn 1-knob COMP mode off. 4. Adjust the desired slider. Drag the sliders to adjust each parameter. When you touch an item, you can also use the [TOUCH AND TURN] knob to adjust the setting. COMP screen menu Press the Menu key ( ) from the COMP screen to display the following options. 1 Copy ձ ղ Adjusting the compressor in 1-knob COMP mode 1. Turn 1-knob COMP mode on. ճ Copies the COMP parameters of the selected channel to the clipboard. 2 Paste Pastes the COMP parameters in the clipboard to the selected channel. 3 Compare Allows you to compare the COMP parameters of the selected channel with the COMP parameters in the clipboard by switching between the two. 4 Default մ - 56 - Resets the COMP settings for the current channel to their default values. TF Series Reference Manual Configuration screens 7 Pre button FX screen (FX1/2, InsFX1–6) Displayed for CH 1–40, ST IN 1 and ST IN 2. Allows you to select whether the pre-fader or post-fader signal is processed by the effect module. On: Before the fader Off: After the fader Allows you to select an effect and edit its parameters. ձ ղ ճ մ յպ ջ 8 Parameter selection buttons Touch to display other parameters available for the current effect. 9 Parameter sliders Allow you to adjust the parameters available for the current effect. 0 Sync button Displayed for effects that have a tempo setting, such as delays. When this button is turned on, the effect's tempo setting can be controlled with the [TAP] button found in the SENDS ON FADER section of the top panel. ռ A Bypass button Allows you to bypass the effects module. ս B Effects output level meter շ ն ո Displays the effects output level. չ 1 Send button C CUE button Turns cue on and off for the effects module. Displayed for CH 1–40, ST IN 1 and ST IN 2. Determines whether a signal is sent (on) or not sent (off) to the FX return channel. 2 EFFECT TYPE button Displays the EFFECT TYPE screen (page 58), where you can select an effect type. 3 Effect type and name Displays the type and name of the current effect. 4 R Safe (recall safe) indicator Displays the recall safe status of the effects module. Displays the RECALL SAFE screen. (page 25) 5 M safe (mute safe) button Turns mute safe on and off for the effects module. 6 FX send level slider Displayed for CH 1–40, ST IN 1 and ST IN 2. Allows you to adjust the amount of signal that is sent to the effects module. - 57 - TF Series Reference Manual Configuration screens FX screen menu Setting an effect Press the Menu key ( 1. Touch the effects type button. ) from the FX screen to display the following options. 1 Copy When the EFFECTS TYPE screen is displayed, select the desired effect type. ձ 2. Touch the Send button. Send button ղ 3. Adjust the parameter sliders as desired. You can adjust the characteristics of the effect, the wet/dry balance, etc. ճ Copies the effect parameters of the selected effect to the clipboard. 2 Paste Pastes the effect parameters in the clipboard to the selected effect. 3 Compare Allows you to compare the effect parameters of the selected effect with the effect parameters in the clipboard by switching between the two. 4 Default մ Resets the selected effect's settings to their default values. 4. Adjust the effects send level slider. This allows you to adjust how much of the channel's signal is sent to the effects module. EFFECT TYPE screen Allows you to select the effect type. Touch the desired button to make a selection. FX send level slider 5. Adjust the FX RTN1/2 levels. FX RTN1/2 channels are in the INPUT FADER BANK. (Stereo Channelspage 42) Setting an insert effect You can configure insert effects for AUX9/10–AUX19/20. 1. Touch the effects type button. When the EFFECTS TYPE screen is displayed, select the desired effect type. 2. Touch the bypass button. Bypass is turned on by default; turn the bypass off. 3. Adjust the parameter sliders as desired. Adjust the characteristics of the effect. - 58 - TF Series Reference Manual Configuration screens Effect parameters DELAY LCR One-input, two-output 3-tap delay. REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE One-input, two-output hall, room, stage, and plate reverbs. Parameter Range Parameter Delay L Description Range 1.0ms–2700.0ms Description Left channel delay time. Delay C 1.0ms–2700.0ms Center channel delay time. Delay R 1.0ms–2700.0ms Right channel delay time. Reverb Time 0.3s–20.0s Determines the length of the reverberation. Initial Delay 1.0ms–500.0ms Determines the amount of time that passes before the initial reverberation is heard. Delay FB 1.0ms–2700.0ms Feedback delay time. High Ratio 0.1–1.0 Ratio of high frequency reverberations to the Reverb Time. Feedback Gain -99 – +99 Amount of feedback. Diffusion 0–10 Left and right spread of the reverberation. High Ratio 0.1–1.0 Amount of high-frequency feedback. Density 0% – 100% Density of the reverberation. HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency. HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency. LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency. Level L -100 – +100 Left channel level. Level C -100 – +100 Center channel level. Level R -100 – +100 Right channel level. Sync Off, On Delay time tempo sync. Note L ----, ~ Value used to calculate the left channel delay time based on the tempo. Note C ----, ~ Value used to calculate the center channel delay time based on the tempo. Note R ----, ~ Value used to calculate the right channel delay time based on the tempo. Note FB ----, ~ Value used to calculate the delay feedback time based on the tempo. MONO DELAY One-input, two-output basic repeating-type delay. Parameter Range Description Delay 1.0ms–2700.0ms Delay time. Feedback Gain -99 – +99 Amount of feedback. High Ratio 0.1–1.0 Amount of high-frequency feedback. HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency. Sync Off, On Delay time tempo sync. Note ----, ~ Value used to calculate the delay time based on the tempo. ECHO Two-input, two-output stereo delay with a crossed feedback loop. STEREO DELAY Two-input, two-output basic stereo delay. Parameter Parameter Range Delay L Description Delay L 1.0ms–1350.0ms Left channel delay time. Delay R 1.0ms–1350.0ms Right channel delay time. Feedback Gain L -99 – +99 Left channel feedback gain. Feedback Gain R -99 – +99 Right channel feedback gain. High Ratio 0.1–1.0 Amount of high-frequency feedback. HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency. Sync Off, On Delay time tempo sync. Note L ----, ~ Value used to calculate the left channel delay time based on the tempo. Note R ----, ~ Value used to calculate the right channel delay time based on the tempo. Range Description 1.0ms–1350.0ms Left channel delay time. Delay R 1.0ms–1350.0ms Right channel delay time. Delay FB L 1.0ms–1350.0ms Left channel feedback delay time. Delay FB R 1.0ms–1350.0ms Right channel feedback delay time. Feedback Gain L -99 – +99 Left channel feedback gain. Feedback Gain R -99 – +99 Right channel feedback gain. XFeedback Gain -99 – +99 Left-to-right, right-to-left feedback gain. High Ratio 0.1–1.0 Amount of high-frequency feedback. HPF Thru, 21.2Hz–8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz–16.0kHz, Thru Low-pass filter cutoff frequency. Sync Off, On Delay time tempo sync. Note L ----, ~ Value used to calculate the left channel delay time based on the tempo. Note R ----, ~ Value used to calculate the right channel delay time based on the tempo. Note FBL ----, ~ Value used to calculate the left channel feedback delay time based on the tempo. Note FBR ----, ~ Value used to calculate the right channel feedback delay time based on the tempo. - 59 - TF Series Reference Manual Configuration screens DELAY-REVERB (V1.1 and later) One-input, two-output effect that has a delay and reverb connected in series. Parameter Delay Range 1.0ms - 2700.0ms GATE REVERB, REVERSE GATE (V1.1 and later) One-input, two-output early reflection with gate, and an early reflection with reverse gate. Description Parameter Range Description Delay time. Type Type-A, Type-B Early reflection type. Feedback Gain -99% - 99% Amount of feedback. Room Size 0.1 - 20.0 Room size; determines interval between early reflections. DLY BAL 0% - 100% Delay mix balance. Liveness 0 - 10 Decay of the early reflections. Reverb Time 0.3s - 20.0s Determines the length of the reverberation. Initial Delay 1.0ms - 500.0ms Delay before the early reflection. High Ratio 0.1 - 1.0 Ratio of high frequency reverberations to the Reverb Time. Diffusion 0 - 10 Width of the reflections in the stereo field. Diffusion 0 - 10 Left and right spread of the reverberation. Density 0% - 100% Density of the reflections. Density 0% - 100% Density of the reverberation. ER Number 1 - 19 Number of reflections. HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency. Feedback Gain -99% - 99% Amount of feedback. LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency. High Ratio 0.1 - 1.0 Amount of high-frequency feedback. REV BAL 0% - 100% Reverb mix balance. HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency. Sync Off, On Parameter tempo sync. LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency. Note ----, ~ Value used to calculate the delay time based on the tempo. CHORUS (V1.1 and later) Two-input, two-output chorus effect. EARLY REF (V1.1 and later) One-input, two-output early reflection effect. Parameter Range Parameter Description Frequency Range 0.05Hz - 10.00Hz Description Modulation speed AM Depth 0% - 100% Depth of amplitude modulation. PM Depth 0% - 100% Depth of pitch modulation. Room size; determines interval between early reflections. MOD. Delay 1.0ms - 500.0ms Delay time of modulation. Decay of the early reflections (0: dead, 10: live). Sync Off, On Parameter tempo sync. 1.0ms - 500.0ms Delay before the early reflection. Note Diffusion 0 - 10 Width of the reflections in the stereo field. Density 0% - 100% Density of the reflections. ER Number 1 - 19 Number of reflections. Type S-Hall, L-Hall, Random, Reverse, Plate, Spring Early reflection type. Room Size 0.1 - 20.0 Liveness 0 - 10 Initial Delay Feedback Gain -99% - 99% Amount of feedback. High Ratio 0.1 - 1.0 Amount of high-frequency feedback. HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency. Value used to calculate the frequency based on the tempo. - FLANGE (V1.1 and later) Two-input, two-output flanger effect. Parameter Frequency Range 0.05Hz - 10.00Hz Description Modulation speed Depth 0% - 100% Depth of modulation. MOD. Delay 1.0ms - 500.0ms Delay time of modulation. Feedback Gain -99% - 99% Amount of feedback. Sync Off, On Parameter tempo sync. Note - 60 - - Value used to calculate the frequency based on the tempo. TF Series Reference Manual Configuration screens SYMPHONIC (V1.1 and later) Two-input, two-output symphonic effect. Parameter Frequency Range 0.05Hz - 10.00Hz Description M BAND COMP (V1.1 and later) Two-input, two-output three-band compressor. Each band has solo and gain reduction metering. Parameter Modulation speed Range Description Depth 0% - 100% Depth of modulation. Low Gain MOD. Delay 1.0ms - 500.0ms Delay time of modulation. Mid Gain -12.0dB - +12.0dB Sync Off, On Parameter tempo sync. High Gain -12.0dB - +12.0dB High-band gain. Value used to calculate the frequency based on the tempo. Total Gain -72dB - +12dB Overall gain. Note - PHASER (V1.1 and later) Two-input, two-output 16-stage phase-shift effect. Parameter Range Description -12.0dB - +12.0dB Low-band gain. Mid-band gain. L-M XOver 21.2Hz - 8.00kHz Low-to-mid crossover frequency. M-H XOver 21.2Hz - 8.00kHz Mid-to-high crossover frequency. Knee 0-5 Compressor knee (all bands). Low/Mid/High Link Off, On When turned on, the difference in the threshold for low, mid, and high is maintained. (V3.0 and later) Frequency 0.05Hz - 10.00Hz Modulation speed Low Thr -54dB - 0dB Low threshold. Depth 0% - 100% Depth of modulation. Low Ratio 1:1 - ∞:1 Low ratio. Feedback Gain -99% - 99% Amount of feedback. Low Attack 0ms - 120ms Low attack time. Offset 0 - 100 Offset of the phase shifted frequency. Low Release 3.34ms - 42.7s Low release time. Phase 0° - 355° Left/right balance of modulation. Low Bypass Off, On Compression bypass feature for low. Stage 2 - 16 Number of phase shift stages. Low Solo Off, On Solo feature for low. HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency. Mid Thr -54dB - 0dB Mid threshold. LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency. Mid Ratio 1:1 - ∞:1 Mid ratio. Sync Off, On Parameter tempo sync. Mid Attack 0ms - 120ms Mid attack time. Value used to calculate the frequency based on the tempo. Mid Release 3.34ms - 42.7s Mid release time. Mid Bypass Off, On Compression bypass feature for mid. Mid Solo Off, On Solo feature for mid. High Thr -54dB - 0dB High threshold. High Ratio 1:1 - ∞:1 High Ratio High Attack 0ms - 120ms High attack time. High Release 3.34ms - 42.7s High release time. High Bypass Off, On Compression bypass feature for high. High Solo Off, On Solo feature for high. Note - NOTE The Make Up parameter is omitted for V3.0 and later. - 61 - TF Series Reference Manual Configuration screens PING PONG DELAY (V2.0 and later) One-input, two-output ping pong delay. The delayed sound alternates between left and right at equal intervals. Parameter Range Description Delay 1.0ms - 1350.0ms Delay time. Feedback Gain -99% - 99% Amount of feedback. High Ratio 0.1 - 1.0 Amount of high-frequency feedback. HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency. LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency. Sync Off, On Note ----, SEND TO AUX screen Allows you to configure the amount of signal that is sent from each channel to the AUX buses. You can swipe left and right to view other buses. ձ Parameter tempo sync. - Value used to calculate the delay time based on the tempo. DUAL PITCH (V2.0 and later) Two-input, two-output pitch-shift effect. Parameter ղ Range Description Pitch 1 -24 - 24 Pitch of Ch1 (semitone increments). Fine 1 -50 - 50 Pitch of Ch1 (1 cent increments). Level 1 -100 - 100 Volume of Ch1. Pan 1 L63 - R63 Pan of Ch1. Delay 1 1.0ms - 1000.0ms Delay time of Ch1. Feedback Gain 1 -99 - 99 Feedback level of Ch1. Pitch 2 -24 - 24 Pitch of Ch2 (semitone increments). Fine 2 -50 - 50 Pitch of Ch2 (1 cent increments). Level 2 -100 - 100 Volume of Ch2. Pan 2 L63 - R63 Pan of Ch2. Delay 2 1.0ms - 1000.0ms Delay time of Ch2. Feedback Gain 2 -99 - 99 Feedback level of Ch2. Mode 1 - 10 Width of pitch shift. Sync Off, On Parameter tempo sync. Note 1 ----, - Value used to calculate Delay 1 based on the tempo. Note 2 ----, - Value used to calculate Delay 2 based on the tempo. ճ մ OUTPUT DELAY (V2.5 and later) Two-input, two-output single delay. When used for INS FX 1–6, this delay is good for delay compensation. Parameter Range 1 Send button Determines whether a signal is sent (on) or not sent (off) to the corresponding AUX bus. 2 Send level slider Description Determines the amount of signal sent to the corresponding AUX bus. LR LINK On, Off Links the left and right delays. Delay 0.3 – 343.6 meter 1.1 – 1127.3 feet 1.00 – 1000.00ms You can specify the delay time in meters, feet, or milliseconds. - 62 - TF Series Reference Manual Configuration screens 3 Pre button ASSIGN screen Allows you to select whether the pre-fader or post-fader signal is sent to the corresponding AUX bus. On: Before the fader Off: After the fader Allows you configure recall safe and mute safe settings, DCA group assignments, signals sent to the SUB bus, etc. ձ ղ ճ 4 Send pan slider Displayed for stereo AUX buses. Allows you to adjust the pan of the signal sent to the corresponding AUX bus. Adjusting the SEND TO AUX level մ 1. Adjust the level sliders as desired. Each level slider determines the amount of signal sent from the selected channel to the corresponding AUX bus. յ 2. Turn the Pre button on or off depending on your needs. ն Send the pre-fader signal when using the AUX bus for on-stage floor monitors—this allows you to create a mix that is separate from the main mix. 1 Recall Safe button Turns Recall Safe on and off for the corresponding channel. You can display the RECALL SAFE screen by touching the jump button in the right corner of the Recall Safe button. (page 25) Send the post-fader signal when using external effects processors or when you want to maintain the same mix balance as the main mix. 3. Turn the send button on or off. 2 Mute Safe button When turned on, the signal is sent to the corresponding AUX bus. You can temporarily exclude certain channels from a mute group. If you mute a mute group, any channels in that group that have mute safe enabled will not be muted. 4. Touch the send pan slider and then adjust it using the [TOUCH AND TURN] knob. When sending the signal to a stereo AUX bus, you can adjust the pan of the signal that is sent. 3 ST button Turns the channel's assignment to the stereo channel on and off. 4 SUB button Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus. 5 SUB level slider Determines the amount of signal sent from the selected channel to the SUB bus. 6 DCA buttons Turns the channel's assignment to each DCA group (1–8) on and off. You can assign a channel to multiple DCA groups if desired. - 63 - TF Series Reference Manual Configuration screens 5 Boxes CH VIEW screen Touch to display the configuration screen for the corresponding feature. You can touch the EQ, GATE, and COMP buttons displayed here to turn the corresponding feature on and off. HA box: Displays the INPUT screen. (page 47) EQ box: Displays the EQ screen. (page 49) GATE box: Displays the GATE screen. (page 53) COMP box: Displays the COMP screen. (page 55) Provides an overview of all the settings for a channel. You can change settings using this screen, in addition to the corresponding feature's configuration screen. Items displayed on this screen vary depending on the type of channel selected. CH1–CH32 6 Channel on/off button ձ ղ մ յ ն շ ո Turns the selected channel on and off. 7 Channel pan slider Adjusts the pan for the selected channel. 8 FX1/FX2 boxes Displays the effect type. When selected, you can use the [TOUCH AND TURN] knob to adjust the effects send level. You can also display the corresponding effect's configuration screen by touching again. Each box displays the amount of signal from the selected channel that is sent to the corresponding effects module. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the triangular bar. The information displayed here indicates whether the signal sent to the effects module is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. ճ չ պ տ վ ս ռ ջ 9 SEND TO AUX box Touch when selected to display the SEND TO AUX screen. Displays the amount of signal from the selected channel that is sent to each AUX bus. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal bar. The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 0 ASSIGN box 3 Input source indicator Displays the ASSIGN screen. (page 63) Displays the input channel's input source. You can select the input source on the INPUT screen. 4 Mute Safe button Touch to temporarily exclude the selected channel from the input mute group. If you mute the input mute group, any channels in that group that have mute safe enabled will not be muted. A Channel output level slider Adjusts the fader level for the selected channel. B Channel output level meter Displays the channel's output signal level. - 64 - TF Series Reference Manual Configuration screens C Direct out port indicator 2 Recall Safe button Indicates the channel's direct out port. For information about channels and output ports, see "Quick Config Input and input channel relationships" (page 92). D Direct out point button 3 Input source indicator Allows you to set the point of the direct out signal. Pre DG: Before the digital gain Pre HPF: Before the high-pass filter Pre Fader: Before the fader Post Fader: After the fader 䃅 3UH'* ',*,7$/ *$,1 +3) Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. %$1' (4 3UH+3) *50(7(5 *50(7(5 *$7( &203 3RVW(4 Displays the input channel's input source. You can select the input source on the INPUT screen. 4 Mute Safe button Touch to temporarily exclude the selected channel from the input mute group. If you mute the input mute group, any channels in that group that have mute safe enabled will not be muted. )$'(5 '&$ 21 3UH)$'(5 5 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ button displayed here to turn EQ on and off. HA box: Displays the INPUT screen. (page 47) EQ box: Displays the EQ screen. (page 49) 3RVW)$'(5 E Direct out on/off button Turns the direct out on and off. 6 Channel on/off button CH33–CH40 Turns the selected channel on and off. ձ ղ մ 7 Channel pan slider ն շ ո Adjusts the pan for the selected channel. 8 FX1/FX2 boxes Displays the effect type. When selected, you can use the [TOUCH AND TURN] knob to adjust the effects send level. You can also display the corresponding effect's configuration screen by touching again. Each box displays the amount of signal from the selected channel that is sent to the corresponding effects module. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the triangular bar. The information displayed here indicates whether the signal sent to the effects module is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. չ պ 9 SEND TO AUX box ճ յ Touch when selected to display the SEND TO AUX screen. Displays the amount of signal from the selected channel that is sent to each AUX bus. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal bar. ռ ջ 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. - 65 - TF Series Reference Manual Configuration screens The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. 4 Mute Safe button Touch to temporarily exclude the selected channel from the input mute group. If you mute the input mute group, any channels in that group that have mute safe enabled will not be muted. 0 ASSIGN box Displays the ASSIGN screen. (page 63) 5 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ button displayed here to turn EQ on and off. HA box: Displays the INPUT screen. (page 47) EQ box: Displays the EQ screen. (page 49) A Channel output level slider Adjusts the fader level for the selected channel. B Channel output level meter Displays the channel's output signal level. 6 Channel on/off button Turns the selected channel on and off. ST IN 1L-ST IN 2R ձ 7 Channel pan slider ղ մ ն շ ո Adjusts the pan for the selected channel. 8 FX1/FX2 boxes Displays the effect type. When selected, you can use the [TOUCH AND TURN] knob to adjust the effects send level. You can also display the corresponding effect's configuration screen by touching again. Each box displays the amount of signal from the selected channel that is sent to the corresponding effects module. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the triangular bar. The information displayed here indicates whether the signal sent to the effects module is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. չ պ ճ յ 9 SEND TO AUX box Touch when selected to display the SEND TO AUX screen. Displays the amount of signal from the selected channel that is sent to each AUX bus. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal bar. The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. ռ ջ 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 0 ASSIGN box Displays the ASSIGN screen. (page 63) A Channel output level slider 3 Input source indicator Adjusts the fader level for the selected channel. Displays the input channel's input source. You can select the input source on the INPUT screen. - 66 - TF Series Reference Manual Configuration screens B Channel output level meter 5 Channel on/off button Displays the channel's output signal level. Turns the selected channel on and off. 6 Channel pan slider FX1L–FX2R Adjusts the pan for the selected channel. ձ ղ ճ 7 SEND TO AUX box յ ն Touch when selected to display the SEND TO AUX screen. Displays the amount of signal from the selected channel that is sent to each AUX bus. Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal bar. The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is displayed in gray. 8 ASSIGN box Displays the ASSIGN screen. (page 63) շ 9 Channel output level slider Adjusts the fader level for the selected channel. ո 0 Channel output level meter Displays the channel's output signal level. մ պ չ DCA 1–DCA 8 1 Channel name ձ Touch to display the CH NAME screen. Touch to display information for a different channel. ղ ճ 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 3 Mute Safe button Touch to temporarily exclude the selected channel from the effects mute group. If you mute the effects mute group, any channels in that group that have mute safe enabled will not be muted. 4 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ button displayed here to turn EQ on and off. FROM box: Displays the SEND FROM screen. (page 75) (V3.0 and later) FX1 (FX2) box: Displays the FX screen. (page 57) EQ box: Displays the EQ screen. (page 49) յ - 67 - մ TF Series Reference Manual Configuration screens 1 Channel name 2 Recall Safe button Touch to display the CH NAME screen. Touch to display information for a different channel. Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 3 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ, GEQ, and COMP buttons displayed here to turn the corresponding feature on and off. FROM box: Displays the SEND FROM screen. (page 75) EQ box: Displays the EQ screen. (page 49) GEQ box: Displays the GEQ screen. (page 72) COMP box: Displays the COMP screen. (page 55) 3 Channel on/off button Turns the selected channel on and off. 4 Channel output level slider Adjusts the fader level for the selected channel. 4 Channel on/off button 5 ASSIGN box (V1.1 and later) When this area is selected, touch this area to display the DCA ASSIGN screen. (page 76) Turns the selected channel on and off. 5 OUTPUT box Displays the OUTPUT screen. (page 74) AUX1–AUX8 6 Channel output level slider ձ ղ ճ մ Adjusts the fader level for the selected channel. յ 7 Channel output level meter Displays the channel's output signal level. AUX 9–AUX 20 ձ ղ ճ մ յ շ ն 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. շ - 68 - ն TF Series Reference Manual Configuration screens 1 Channel name SUB Touch to display the CH NAME screen. Touch to display information for a different channel. ձ ղ ճ մ յ 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 3 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ and COMP buttons displayed here to turn the corresponding feature on and off. FROM box: Displays the SEND FROM screen. (page 75) EQ box: Displays the EQ screen. (page 49) COMP box: Displays the COMP screen. (page 55) InsFX box: Displays the FX screen. (page 57) 4 Channel on/off button Turns the selected channel on and off. շ ն 5 OUTPUT box Displays the OUTPUT screen. (page 74) 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. 6 Channel output level slider Adjusts the fader level for the selected channel. 7 Channel output level meter 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. Displays the channel's output signal level. 3 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ and COMP buttons displayed here to turn the corresponding feature on and off. FROM box: Displays the SEND FROM screen. (page 75) EQ box: Displays the EQ screen. (page 49) COMP box: Displays the COMP screen. (page 55) 4 Channel on/off button Turns the selected channel on and off. 5 OUTPUT box Displays the OUTPUT screen. (page 74) 6 Channel output level slider Adjusts the fader level for the selected channel. - 69 - TF Series Reference Manual Configuration screens 7 Channel output level meter 5 OUTPUT box Displays the channel's output signal level. Displays the OUTPUT screen. (page 74) 6 Channel output level slider ST L, ST R Adjusts the fader level for the selected channel. ձ ղ ճ մ յ 7 Channel output level meter Displays the channel's output signal level. MATRIX1– MATRIX4 (V2.5 and later) ձ ղ ճ մ յ շ ն 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. շ ն 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 3 Boxes Touch to display the configuration screen for the corresponding feature. You can touch the EQ, GEQ, and COMP buttons displayed here to turn the corresponding feature on and off. EQ box: Displays the EQ screen. (page 49) GEQ box: Displays the GEQ screen. (page 72) COMP box: Displays the COMP screen. (page 55) 1 Channel name Touch to display the CH NAME screen. Touch to display information for a different channel. 2 Recall Safe button Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen (page 25) by touching the jump button in the right corner of the Recall Safe button. 4 Channel on/off button Turns the selected channel on and off. - 70 - TF Series Reference Manual Configuration screens 3 Boxes CH NAME screen Touch to display the configuration screen for the corresponding feature. You can touch the EQ, and COMP buttons displayed here to turn the corresponding feature on and off. FROM box: Displays the SEND FROM screen. (page 75) EQ box: Displays the EQ screen. (page 49) DELAY box: Displays the DELAY screen. (page 78) Allows you to set the channel name, icon, and channel color. ղ ն ձ 4 Channel on/off button ճ Turns the selected channel on and off. մ 5 OUTPUT box Displays the OUTPUT screen. (page 74) 6 Channel output level slider յ Adjusts the fader level for the selected channel. 1 Name text box 7 Channel output level meter Enter the channel name here. Touch the text box to enter the name using the KEYBOARD screen. (page 10) Displays the channel's output signal level. CH VIEW screen menu Press the Menu key ( 2 Icon button Touch to display a list of available channel icons. ) from the CH VIEW screen to display the following options. 3 Category button 1 CH Copy Allows you to select a different category of channel icons. The available categories vary depending on the type of channel. Copies the settings of the current channel. 2 CH Paste ձ ղ Pastes settings from another channel and applies them to the current channel. 3 CH Default Resets the settings of the current channel to their default values. 4 Channel icon list Touch to apply the channel icon. You can drag this area up and down to display all of the available icons. 5 Sample Name button Displays a list of commonly used channel names based on the selected channel icon. Touch on a sample name to use it as the channel name. ճ - 71 - TF Series Reference Manual Configuration screens 6 Color button Touch to display a list of available channel colors. GEQ screen You can use the internal graphic equalizer (GEQ) to process AUX 1–8 and STEREO channel signals. The GEQ is a mono, 12-band EQ. Each band is 1/3 octave wide, with an adjustable gain range of ±15 dB. 31 bands are available; you can adjust gain for up to 12 bands. ձ ղ ճ մ յ Touch the desired color to use that color as the channel color. շ ն ո 1 GEQ button Turns the GEQ on and off. 2 GEQ channel selection buttons These buttons are displayed only when configuring the GEQ for stereo AUX buses or the STEREO channels. They are not displayed for mono AUX buses. : Turns the GEQ left/right channel link on and off. L/R: Allows you select the left and right GEQ channels. 3 Recall Safe button Displays the RECALL SAFE screen. (page 25) 4 Fader Assign button (V2.0 and later) This feature is available for TF5/TF3/TF1. When this button is turned on, you can use the faders to adjust each band of the GEQ. 5 EQ graph, RTA display, band selection Displays the EQ settings with RTA (real-time analysis). Swipe left or right or touch an area to display the gain sliders for other bands. - 72 - TF Series Reference Manual Configuration screens When the Fader Assign button is turned on, you can use this area to change which bands can be adjusted by the faders. (TF3 and TF1 only.) Using faders to adjust GEQ (TF5/TF3/TF1) 1. Touch the Fader Assign button to turn it on. 6 Gain slider The current gain setting for each band is applied to the faders in the channel strip section of the console. Adjusts the gain for the corresponding band. Swipe left or right to display the gain sliders for other bands. When the Fader Assign button is turned on, you can use this area to change which bands can be adjusted by the faders. (TF3 and TF1 only.) You can confirm the frequency and gain for each band in the channel display. 2. For TF3 and TF1, swipe left or right on the gain sliders in the GEQ screen to select other bands. 7 Output level meter You can swipe the EQ graph, RTA display, or band selection area left or right to select other bands. Displays the GEQ output level. For TF5, all bands are applied to the faders. 3. Use the console's faders to adjust the gain. 8 Available bands display If you turn on a channel's [ON] key, you can reset the gain of frequencies assigned to that channel to 0 dB. Displays the number of additional bands that you can adjust. 4. When you are finished making adjustments, touch the Fader Assign button to turn it off. Using GEQ Fader Assign also turns off when you switch another screen or enter SENDS ON FADER mode. 1. Touch the GEQ button to turn GEQ on. 2. Swipe left or right on the gain sliders to display the desired bands. 3. Drag sliders up and down to adjust the gain of the corresponding bands. GEQ screen menu Press the Menu key ( You can confirm the overall output using the output level meter. Once you have adjusted gain for 12 bands, the gain sliders for the remaining bands are displayed in gray. If you want adjust gain for other bands, you must first set the gain to 0 for one of the bands you have already adjusted. ) from the GEQ screen to display the following options. 1 Copy ձ Touch the gain slider quickly two times to reset it to its default value (0 dB). Gain slider ղ Output level meter ճ Copies the GEQ parameters of the selected channel to the clipboard. 2 Paste Pastes the GEQ parameters in the clipboard to the selected channel. 3 Compare Allows you to compare the GEQ parameters of the selected channel with the GEQ parameters in the clipboard by switching between the two. 4 Default մ - 73 - Resets the GEQ settings for the current channel to their default values. TF Series Reference Manual Configuration screens 4 Out Gain text box OUTPUT screen Allows you to adjust the output gain. When selected, you can use the [TOUCH AND TURN] knob to adjust the setting. Touch again to display the keyboard and enter a value. Allows you to configure how output channels will be output. The buttons displayed vary depending on the type of output channel selected. 5 Φ (phase) button Buttons Output channel ST button SUB button SUB slider AUX 1–8 – – AUX9/10–AUX19/20 ○ ○ SUB – – STEREO – – MATRIX1–4 – – Out Gain Buttons Φ button OMNI OUT Indicator OMNI OUT Buttons ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Allows you to reverse the phase. When turned on, the output signal's phase is reversed. 6 OMNI OUT button Displays the number of the OMNI OUT to which the channel is directed. Up to two numbers can be displayed. For three or more numbers, "+" is displayed. Displays the OMNI OUT screen. (page 22) For information about channels and output ports, see "Quick Config Input and input channel relationships" (page 92). 7 Recall Safe button (V1.1 and later) ○ : Displayed Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen by touching the jump button in the right corner of the Recall Safe button. – : Not displayed շ մ ձ ղ ճ ն յ 1 ST button Determines whether the stereo channel is output or not. 2 SUB button (V3.0 and later) Determines whether the channel's signal is sent (on) or not sent (off) to the SUB bus. 3 SUB slider (V3.0 and later) Determines the amount of signal sent from the selected channel to the SUB bus. - 74 - TF Series Reference Manual Configuration screens SEND FROM screen Adjusting the SEND FROM level 1. Touch the ON button for the input channels that you want to send. 2. Touch the send pan slider, and then use the [TOUCH AND TURN] knob to adjust the pan of the input channel signal that is sent. 3. Drag the send level sliders to adjust the amount of input channel signal that is sent. Allows you to send signals from the each channels. ձ ON button Send pan slider ղ Send level slider ճ Pre button մ 1 ON button Determines whether a signal is sent (on) or not sent (off) from the corresponding each channel. 2 Send pan slider Adjusts the pan of the input channel signal that is sent. For AUX 1–8, this slider is only displayed if the signal type is set to stereo. Not displayed for MATRIX 1–4 or FX1L–FX2R. Adjusting the send level from AUX channels, STEREO channels, and SUB channel to a MATRIX channel (V2.5 and later) 1. Touch the ON button for the AUX channel, STEREO channel, or SUB channel that you want to send. (It is turned on by default.) 2. Drag the send level sliders to adjust the amount of AUX channel, STEREO channel, and SUB channel signal that is sent. ON button 3 Send level slider Determines the amount of signal sent from the corresponding each channel. 4 Pre button Send level slider Allows you to select whether the pre-fader or post-fader signal is sent from the corresponding input channel. On: Before the fader Off: After the fader Not displayed for MATRIX 1–4. NOTE • You can send the post-on signal of an AUX channel, STEREO channel, or SUB channel to a MATRIX channel. • Left and right channel SEND levels can be adjusted independently for stereo channels such as AUX 9/ 10 and STEREO. - 75 - TF Series Reference Manual Configuration screens DCA ASSIGN screen SEND FROM screen menu Press the Menu key ( ) from the SEND FROM screen to display the following options. Allows you to group channels together by assigning them to DCA groups. 1 All Pre ձ ձ Turns on all Pre buttons. ղ մ 2 All Post ղ Turns off all Pre buttons. 3 All Nominal (V2.0 and later) Sets all SEND levels to nominal (0 dB). 4 Dup. STEREO (V2.0 and later) ճ Duplicate STEREO. Copies each channel's fader level and applies it to the SEND level. NOTE մ This menu is not available for MATRIX channels 1–4. ճ 1 Channel display area Displays the channels that are assigned to the current DCA group. 2 DCA ASSIGN buttons Allow you to select which channels are assigned to the current DCA group. Selected channels are highlighted. 3 CH VIEW button Displays the CH VIEW screen. (page 64) 4 Recall Safe button (V1.1 and later) Turns recall safe on and off for the corresponding channel. You can display the RECALL SAFE screen by touching the jump button in the right corner of the Recall Safe button. - 76 - TF Series Reference Manual Configuration screens DCA roll out Assigning channels to a DCA group 1. Press the [INPUT1] and [INPUT2] buttons on the top panel simultaneously to display the GROUP channels. 2. Press a [SEL] button on the top panel that corresponds to the DCA group that you want to configure. 3. Touch the DCA buttons that correspond to the channels you want to assign to the group. (You can select multiple channels.) The selected channels are displayed in the channel display area. Channel is selected You can assign DCA groups 1–8 to the last 8 channel strips on the right side of the console's top panel. (TF5: channel strips 25–32; TF3: 17–24; TF1: 9–16) You can then assign the channels of a DCA group to the channel strips on the left side of the console's top panel by pressing the corresponding DCA group's [SEL] key. (TF5: channel strips 1–24; TF3: 1–16; TF1: 1–8) The number of channels in the group that will be assigned to the channels strips depends on the model number. For the TF5 console, the 24 lowest numbered channels in the group are assigned; the lowest 16 for the TF 3, and the lowest 8 for the TF1. This feature allows you to manipulate the channels strips for both the DCA group master and the group's "member" channels at the same time. Member channels of selected DCA group assigned to these channel strips DCA groups 1–8 assigned to these channel strips DCA ASSIGN screen menu Press the Menu key ( ) from the DCA ASSIGN screen to display the following options. 1 Clear All Removes all channels from the group. NOTE For TF-RACK, this item is displayed only in the OVERVIEW screen. The channels assigned to the faders are the same as for the TF1. ձ - 77 - TF Series Reference Manual Configuration screens DELAY screen (V2.5 and later) Allows you to configure the delay applied to the signal output from the MATRIX channels. This works well for delay compensation for speakers that are placed far away. ձ ղ ճ 1 DELAY button Turns the DELAY on and off. 2 DELAY slider Allows you to adjust the delay time. You can specify the delay time in meters, feet, or milliseconds. 3 DELAY setting Determines the delay time by specifying distance (meters or feet) or time (milliseconds). Touch a text box to display the keyboard and enter a value. - 78 - TF Series Reference Manual Maintenance screen Maintenance screen Initialize All Memory screen Allows you to access maintenance features. Resets the console's memory, including Scene memory and Libraries, to the factory default settings. ձ ղ ձ ճ մ յ ն շ ո 1 Displays the Initialize All Memory screen. 2 Displays the Initialize Current Memory screen. (page 80) 3 Displays the Initialize NY64-D screen. (page 80) (V3.0 and later) 4 Displays the Input Port Trim screen. (page 81) 5 Displays the Output Port Trim screen. (page 81) 6 Displays the Fader Calibration screen. (page 82) (TF5/TF3/TF1) 7 Displays the Channel Color Calibration screen. (page 83) (TF5/TF3/TF1) 8 Closes the maintenance screen. 1 INITIALIZE button Initializes the internal memory. The following data is initialized: all Scene data, all Preset data, mixing data, and setup data. Touch to display the confirmation message. Touch the OK button to perform the operation. Do not touch any buttons until the initialization is complete. When initialization is complete, you can continue to use other maintenance features without exiting. Using the maintenance screen 1. Turn on the console while pressing the Home key ( ). The maintenance screen is displayed. Touch the button that corresponds to the desired maintenance feature. Touch the Exit button to exit the maintenance mode. NOTE • When initializing the internal memory, all data stored in the memory will be lost. Use caution when performing this operation. • The internal clock, network settings, and brightness settings are not initialized by this operation. • If an NY64-D is installed, we recommend you turn the TF series console off and on again so the console will be set up correctly with the connected Dante devices. - 79 - TF Series Reference Manual Maintenance screen Initialize Current Memory screen Initialize NY64-D screen (V3.0 and later) Resets the console's current memory to the factory default settings. Scene memory and Libraries are not reset. ձ ձ 1 INITIALIZE button Resets the settings of the NY64-D installed in the expansion slot. After initializing, in order to reconfigure the connected Dante device, we recommend first turning the TF series console off and then on again. 1 INITIALIZE button Initializes the current memory. The following data is initialized: mixing data and setup data. Touch to display the confirmation message. Touch the OK button to perform the operation. Do not touch any buttons until the initialization is complete. When initialization is complete, you can continue to use other maintenance features without exiting. NOTE A NY64-D card will be initialized even if Dante Device Lock has been enabled for it. In this case, Dante Device Lock will be disabled after the card is initialized. NOTE When initializing the current memory, all data in the current memory will be lost. Use caution when performing this operation. - 80 - TF Series Reference Manual Maintenance screen Input Port Trim screen Output Port Trim screen Allows you to adjust the gain of each INPUT jack in 0.01 dB increments. Allows you to adjust the gain of each OMNI OUT jack in 0.01 dB increments. ձ ձ ղ ղ 1 INPUT jack selection buttons 1 OMNI OUT jack selection buttons Select the INPUT jack that you want to configure here. Select the button that corresponds to the INPUT jack you want to configure, and then use the [TOUCH AND TURN] knob to adjust the value. After making adjustments, start up the console as usual. 2 Reset All button Select the OMNI OUT jack that you want to configure here. Select the button that corresponds to the OMNI OUT jack you want to configure, and then use the [TOUCH AND TURN] knob to adjust the value. After making adjustments, start up the console as usual. 2 Reset All button Resets all values to 0.00 dB. The factory default setting is also 0.00 dB. Touch to display the confirmation message. Touch the OK button to perform the operation. Resets all values to 0.00 dB. The factory default setting is also 0.00 dB. Touch to display the confirmation message. Touch the OK button to perform the operation. NOTE NOTE When the reset is complete, you can continue to use other maintenance features without exiting. When the reset is complete, you can continue to use other maintenance features without exiting. - 81 - TF Series Reference Manual Maintenance screen Fader Calibration screen (TF5/TF3/TF1) Calibrating the faders In some usage environments, discrepancies may occur in the motion of the motor faders. You can use this screen to correct these discrepancies 1. Press the [SEL] key on the top panel that corresponds to the fader you want to calibrate. 2. Touch the START button on the FADER CALIBRATION MODE screen. 3. Touch the OK button when the confirmation message is displayed. 4. When calibration has finished, touch the APPLY button. 5. Touch the Exit button in the maintenance menu and start up the console as usual. NOTE • This feature automatically calibrates the specified fader (channel strip or master section fader). • When calibration is complete, you can continue to use other maintenance features without exiting. If a fader must be calibrated again If a fader must be calibrated again, the [ON] or [CUE] key of the corresponding fader will flash. Use the following procedure to recalibrate. ձ ղ ճ 1 START button Starts the calibration. Touch to display the confirmation message. Touch the OK button to perform the operation. 2 Cancel button Stops the calibration. 3 Apply button 1. When the message "Found faders requiring adjustment. Please calibrate faders again." is displayed, touch the Close button to close the popup. 2. Touch the Apply button displayed on the screen. The [SEL] key of the fader that was flashing begins to flash. 3. Slide the corresponding fader to the highest and lowest positions several times. Make sure the fader's slide action is smooth and not getting stuck. 4. Perform the procedure described in "Calibrating the faders" beginning at step 2. If you perform this procedure multiple times and the popup message is still displayed, contact your Yamaha dealer. Applies the settings and exits. - 82 - TF Series Reference Manual Maintenance screen Channel Color Calibration screen (TF5/TF3/TF1) You can adjust the colors of the LEDs as desired. LED colors are adjusted one at a time. ձ Adjusting channel colors 1. Press the [SEL] key on the top panel that corresponds to the channel color you want to adjust. 2. Touch a color button to choose a color. 3. While comparing the [SEL] you selected with the other indicators on the top panel, use the [TOUCH AND TURN] knob or the [USER DEFINED KNOBS] B, C, and D to adjust the color. 4. When finished, touch the Apply button to apply the settings. 5. Touch the Exit button in the maintenance menu and start up the console as usual. NOTE • • • • • ղ ճ For TF3 and TF1, channels not supported by the console are not displayed. Only one channel color can be adjusted at a time. The Apply button is only displayed after you begin adjusting the channel's color. To reset all channel color's to their factory default values, touch the Reset All button. When the reset is complete, you can continue to use other maintenance features without exiting. մ 1 Color buttons Allow you to select a color. 2 RGB knobs Allow you to adjust the color. 3 Apply button Applies the settings and exits. 4 Reset All button Starts the calibration. Touch to display the confirmation message. Touch the OK button to perform the operation. - 83 - TF Series Reference Manual Reference Reference List of parameters saved in Scenes and Presets CH 1–40 Channel Library Recall*3 Can use Scene Recall Safe Recall CH (Exclude) (All) HA HA Recall EQ Input Select Name Recall Gate Recall Comp Scene All HA Gain O O O O O O +48V O O O O O O Φ O O O O O O Digital Gain O O O O O O O O O Input Select Processing Send To Fader/On Name Stereo Link O O O O Input Select O O Channel Name O O O O O O Category, Color, Icon O O O O O O O O O O Stereo Link O ON O O O O O O Point O O O O O O HPF O O O O O O O O PEQ O O O O O O O O O GATE*1 O O O O O O O O*2 O O O O O Direct Out*1 COMP*1 TO AUX TO FX O O O Level O O O Pan O O O O O*2 O O ON O O O O Pre O O O O Level O O O O ON O O O O Pre O O O O Assign O O O O O O Pan O O O O O O Level O O O O O O O ON O O O O O O O ON O O O O Fader O O O O DCA Assign O O TO ST TO SUB O O O O Mute Safe O Recall Safe O CUE O *1 *2 *3 CH 1–32 only Only parameters are linked. (Gain reduction control is not linked.) Libraries created for CH 1–32 cannot recall to CH 33–40. Similarly, libraries created for CH 33–40 cannot recall to CH 1–32. - 84 - TF Series Reference Manual Reference ST IN 1, ST IN 2 Channel Library Recall Can use Scene Recall Safe Recall CH (Exclude) (All) HA HA Input Select Name All HA O O O O O O Digital Gain O O O O O O O*1 O O O O O O O O Level O O Pan O O Channel Name O*1 O*1 O O O Category, Color, Icon O O O PEQ O O O TO FX Scene Φ Input Select TO AUX Recall EQ O O Input Select Processing Send To Fader/On Name Stereo Link O O O O O O O O O O O ON O O O O Pre O O O O Level O O O O ON O O O O Pre O O O O Assign O O O O O O Balance O O O O O O Level O O O O O O O ON O O O O O O O ON O O O O Fader O O O O DCA Assign O O TO ST TO SUB O O O O O Mute Safe O Recall Safe O CUE O *1 Input Select can only recall Libraries for the same channel. - 85 - TF Series Reference Manual Reference FX 1, FX 2 Channel Library Recall Can use Scene Recall Safe Recall CH (All) (Exclude) FX Recall FX Recall EQ Scene With Send*1 All FX Processing Send To Fader/On Name Stereo Link Name Channel Name O O O O O O Category, Color, Icon O O O O O O FX O O O PEQ O O O TO AUX O O O O O Level O O Pan O O ON O Pre O O O O O O O O O O O O O Assign O O O O O Balance O O O O O Level O O O O O O ON O O O O O O ON O O O O Fader O O O O DCA Assign O O TO ST TO SUB O O O O O Mute Safe O Recall Safe O CUE O *1 For With Send, TO FX signals from CH 1–40, ST IN 1, and ST IN 2 can be recall safe. - 86 - TF Series Reference Manual Reference AUX Channel Library Recall Recall CH (All) Can use Scene Recall Safe *4 (Exclude) GEQ*1 FX*2 Recall EQ Recall GEQ*1 Recall COMP*1 Recall FX*2 Scene With Send All FX*2 GEQ*1 Processing Fader/ On Gain/Φ Name Stereo Link O*2 Name Channel Name O O O O O O Category, Color, Icon O O O O O O O O O O O O O O O O O O O O O O *1 Signal Type Pan Link O O O O PEQ O O O O GEQ*1 O O O COMP O O Ins FX*2 O O TO ST Assign*2 O O O O O O O O O O O O O O O O O*3 O O O O O Level O O O ON O O O ON O O O O Fader O O O O TO SUB*2 Send From OUTPUT O Level O O O Pan O O O ON O O O Pre O O O Balance O O O O O O Out Gain O O O O O O O O Φ O O O O O O O Recall Safe O CUE O *1 *2 *3 *4 AUX 1–8 only AUX 9/10–19/20 only Only when L/R LINK for GEQ is turned on Libraries created for AUX 1–8 cannot recall to AUX 9/10–19/20. Similarly, libraries created for AUX 9/10–19/20 cannot recall to AUX 1–8. - 87 - TF Series Reference Manual Reference STEREO, SUB Channel Library Recall Can use Scene Recall Safe Recall CH (All) (Exclude) GEQ*1 Recall EQ Recall GEQ*1 Recall COMP Scene With Send*2 All GEQ*1 Processing Fader/On Gain/Φ Name Stereo Link*1 Name Channel Name O O O O O O Category, Color, Icon O O O O O O O O O O O O O O ON O O O O Fader O O O O STEREO/SUB Level Link*2 O O*2 O*2 *2 O LPF PEQ O *1 GEQ O COMP O Send From*2 OUTPUT O O O O O Level ON O O O O O O O O O O O*3 O O O O O Balance*1 O O O O O Out Gain O O O O O O Φ O O O O O O O Recall Safe O CUE O *1 *2 *3 *4 STEREO only SUB only Only when L/R LINK for GEQ is turned on Libraries created for STEREO cannot recall CH/EQ to SUB. Similarly, libraries created for SUB cannot recall CH/EQ to STEREO. - 88 - TF Series Reference Manual Reference MATRIX (V2.5 and later) Channel Library Recall Recall CH (All) (Exclude) Recall EQ Can use Scene Recall Safe Scene With Send All FX GEQ Processing Fader/On O O O Category, Color, Icon O O O PEQ O O O O O DELAY Stereo Link O O O O O O O O ON O O O Fader O O O OUTPUT Name Name Channel Name Send From Gain/Φ Level ON O O O O Out Gain O O O O O Φ O O O O O Recall Safe CUE DCA Can use Scene Recall Safe Scene All Fader/On Channel Name O O Category, Color, Icon O O ON O O O O Fader O O DCA Assign O O Name O O Recall Safe CUE OMNI OUT OMNI OUT Patch Scene Can use Scene Recall Safe O O (All OMNI OUT) - 89 - TF Series Reference Manual Reference Access limitation parameter list CH1-40 CH1-40 HA Input Select Processing Send To Fader/ON Name High Level O O O O O O O Mid Level O O O O O X O Low Level X X X X O X X Other ST IN ST IN 1-2 HA Input Select Processing Send To Fader/ON Name High Level O O O O O O O Mid Level O X O O O X O Low Level X X X X O X X With Send FX Processing Send To Fader/ON Name Other FX RTN FX RTN 1-2 High Level O O O O O O O Mid Level O O O O O X X Low Level X X X X O X X DCA DCA 1-8 Fader/ON Name DCA Assign High Level O O O Mid Level O X X Low Level O X X With Send FX GEQ Processing Fader/ON Gain/Φ Name High Level O – O O O O O O Mid Level O – O O O X X O OUTPUT AUX1–8 AUX9/10–19/20 STEREO SUB MATRIX1–4 Other Other Low Level X – X X O X X X High Level O O – O O O O O Mid Level O O – O O X X O Low Level X X – X O X X X High Level – – O O O O O O Mid Level – – X X O X X X Low Level – – X X O X X X High Level O – – O O O O – Mid Level O – – X O X X – Low Level X – – X O X X – High Level O – – O O O O – Mid Level X – – X X X X – Low Level X – – X X X X – - 90 - TF Series Reference Manual Reference GENERAL Scene A Scene B Library A Library B Setup Other High Level Mid Level Low Level Store O O X Recall O O O Store O O X Recall O O O Store O O X Recall O O X Store O O X Recall O O X +48V Master O X X Bus Setup O O X Brightness O O O Custom Fader Bank O O X File Load O X X Network X X X OMNI OUT Patch O X X Preference O O O Recall Safe O X X Slot Setup O X X Time X X X User Defined Control O X X Monitor Delay O X X Mute Safe O X X Oscillator O O X Stereo Link O O X - 91 - TF Series Reference Manual Reference Quick Config Input and input channel relationships Tio1608-D: TF INPUT Tio1608-D UNIT ID 1: INPUT1 SLOT: TF INPUT CHANNEL SLOT IN 1 TF OUTPUT CHANNEL: SLOT CH1 Input Select CH1 Direct Out SLOT OUT 1 Tio1608-D: TF OUTPUT No connection Tio1608-D UNIT ID 1: INPUT2 SLOT IN 2 CH2 Input Select CH2 Direct Out SLOT OUT 2 No connection Tio1608-D UNIT ID 1: INPUT3 SLOT IN 3 CH3 Input Select CH3 Direct Out SLOT OUT 3 No connection Tio1608-D UNIT ID 1: INPUT4 SLOT IN 4 CH4 Input Select CH4 Direct Out SLOT OUT 4 No connection Tio1608-D UNIT ID 1: INPUT5 SLOT IN 5 CH5 Input Select CH5 Direct Out SLOT OUT 5 No connection Tio1608-D UNIT ID 1: INPUT6 SLOT IN 6 CH6 Input Select CH6 Direct Out SLOT OUT 6 No connection Tio1608-D UNIT ID 1: INPUT7 SLOT IN 7 CH7 Input Select CH7 Direct Out SLOT OUT 7 No connection Tio1608-D UNIT ID 1: INPUT8 SLOT IN 8 CH8 Input Select CH8 Direct Out SLOT OUT 8 No connection Tio1608-D UNIT ID 1: INPUT9 SLOT IN 9 CH9 Input Select CH9 Direct Out SLOT OUT 9 No connection Tio1608-D UNIT ID 1: INPUT10 SLOT IN 10 CH10 Input Select CH10 Direct Out SLOT OUT 10 No connection Tio1608-D UNIT ID 1: INPUT11 SLOT IN 11 CH11 Input Select CH11 Direct Out SLOT OUT 11 No connection Tio1608-D UNIT ID 1: INPUT12 SLOT IN 12 CH12 Input Select CH12 Direct Out SLOT OUT 12 No connection Tio1608-D UNIT ID 1: INPUT13 SLOT IN 13 CH13 Input Select CH13 Direct Out SLOT OUT 13 No connection Tio1608-D UNIT ID 1: INPUT14 SLOT IN 14 CH14 Input Select CH14 Direct Out SLOT OUT 14 No connection Tio1608-D UNIT ID 1: INPUT15 SLOT IN 15 CH15 Input Select CH15 Direct Out SLOT OUT 15 No connection Tio1608-D UNIT ID 1: INPUT16 SLOT IN 16 CH16 Input Select CH16 Direct Out SLOT OUT 16 No connection Tio1608-D UNIT ID 2: INPUT1 SLOT IN 17 CH17 Input Select CH17 Direct Out SLOT OUT 17 No connection Tio1608-D UNIT ID 2: INPUT2 SLOT IN 18 CH18 Input Select CH18 Direct Out SLOT OUT 18 No connection Tio1608-D UNIT ID 2: INPUT3 SLOT IN 19 CH19 Input Select CH19 Direct Out SLOT OUT 19 No connection Tio1608-D UNIT ID 2: INPUT4 SLOT IN 20 CH20 Input Select CH20 Direct Out SLOT OUT 20 No connection Tio1608-D UNIT ID 2: INPUT5 SLOT IN 21 CH21 Input Select CH21 Direct Out SLOT OUT 21 No connection Tio1608-D UNIT ID 2: INPUT6 SLOT IN 22 CH22 Input Select CH22 Direct Out SLOT OUT 22 No connection Tio1608-D UNIT ID 2: INPUT7 SLOT IN 23 CH23 Input Select CH23 Direct Out SLOT OUT 23 No connection Tio1608-D UNIT ID 2: INPUT8 SLOT IN 24 CH24 Input Select CH24 Direct Out SLOT OUT 24 No connection Tio1608-D UNIT ID 2: INPUT9 SLOT IN 25 CH25 Input Select CH25 Direct Out SLOT OUT 25 No connection Tio1608-D UNIT ID 2: INPUT10 SLOT IN 26 CH26 Input Select CH26 Direct Out SLOT OUT 26 No connection Tio1608-D UNIT ID 2: INPUT11 SLOT IN 27 CH27 Input Select CH27 Direct Out SLOT OUT 27 No connection Tio1608-D UNIT ID 2: INPUT12 SLOT IN 28 CH28 Input Select CH28 Direct Out SLOT OUT 28 No connection Tio1608-D UNIT ID 2: INPUT13 SLOT IN 29 CH29 Input Select CH29 Direct Out SLOT OUT 29 No connection Tio1608-D UNIT ID 2: INPUT14 SLOT IN 30 CH30 Input Select CH30 Direct Out SLOT OUT 30 No connection Tio1608-D UNIT ID 2: INPUT15 SLOT IN 31 CH31 Input Select CH31 Direct Out SLOT OUT 31 No connection Tio1608-D UNIT ID 2: INPUT16 SLOT IN 32 CH32 Input Select CH32 Direct Out SLOT OUT 32 No connection Tio1608-D UNIT ID 3: INPUT1*1 SLOT IN 33 CH33 Input Select*1 AUX1 Output SLOT OUT 33 Tio1608-D UNIT ID 1: OUTPUT1 Tio1608-D UNIT ID 3: INPUT2*1 SLOT IN 34 CH34 Input Select*1 AUX2 Output SLOT OUT 34 Tio1608-D UNIT ID 1: OUTPUT2 Tio1608-D UNIT ID 3: INPUT3*1 SLOT IN 35 CH35 Input Select*1 AUX3 Output SLOT OUT 35 Tio1608-D UNIT ID 1: OUTPUT3 *1 SLOT IN 36 *1 AUX4 Output SLOT OUT 36 Tio1608-D UNIT ID 1: OUTPUT4 INPUT5*1 SLOT IN 37 Select*1 AUX5 Output SLOT OUT 37 Tio1608-D UNIT ID 1: OUTPUT5 *1 Tio1608-D UNIT ID 3: INPUT4 Tio1608-D UNIT ID 3: CH36 Input Select CH37 Input *1 Tio1608-D UNIT ID 3: INPUT6 SLOT IN 38 CH38 Input Select AUX6 Output SLOT OUT 38 Tio1608-D UNIT ID 1: OUTPUT6 Tio1608-D UNIT ID 3: INPUT7*1 SLOT IN 39 CH39 Input Select*1 AUX7 Output SLOT OUT 39 Tio1608-D UNIT ID 2: OUTPUT1 Tio1608-D UNIT ID 3: INPUT8*1 SLOT IN 40 CH40 Input Select*1 AUX8 Output SLOT OUT 40 Tio1608-D UNIT ID 2: OUTPUT2 *1 No connection for TF1, TF-RACK. - 92 - TF Series Reference Manual Reference Tio1608-D: TF INPUT SLOT: TF INPUT CHANNEL TF OUTPUT CHANNEL: SLOT Tio1608-D: TF OUTPUT No connection SLOT IN 41 No connection AUX9 Output SLOT OUT 41 Tio1608-D UNIT ID 2: OUTPUT3 No connection SLOT IN 42 No connection AUX10 Output SLOT OUT 42 Tio1608-D UNIT ID 2: OUTPUT4 No connection SLOT IN 43 No connection AUX11 Output SLOT OUT 43 Tio1608-D UNIT ID 2: OUTPUT5 No connection SLOT IN 44 No connection AUX12 Output SLOT OUT 44 Tio1608-D UNIT ID 2: OUTPUT6 No connection SLOT IN 45 No connection AUX13 Output SLOT OUT 45 Tio1608-D UNIT ID 3: OUTPUT1 No connection SLOT IN 46 No connection AUX14 Output SLOT OUT 46 Tio1608-D UNIT ID 3: OUTPUT2 No connection SLOT IN 47 No connection AUX15 Output SLOT OUT 47 Tio1608-D UNIT ID 3: OUTPUT3 No connection SLOT IN 48 No connection AUX16 Output SLOT OUT 48 Tio1608-D UNIT ID 3: OUTPUT4 No connection SLOT IN 49 No connection AUX17 Output SLOT OUT 49 Tio1608-D UNIT ID 3: OUTPUT5 No connection SLOT IN 50 No connection AUX18 Output SLOT OUT 50 Tio1608-D UNIT ID 3: OUTPUT6 No connection SLOT IN 51 No connection AUX19 Output SLOT OUT 51 Tio1608-D UNIT ID 3: OUTPUT7 No connection SLOT IN 52 No connection AUX20 Output SLOT OUT 52 Tio1608-D UNIT ID 3: OUTPUT8 No connection SLOT IN 53 No connection MATRIX1 OUT (V2.5 and later) SLOT OUT 53 No connection No connection SLOT IN 54 No connection MATRIX2 OUT (V2.5 and later) SLOT OUT 54 No connection No connection SLOT IN 55 No connection MATRIX3 OUT (V2.5 and later) SLOT OUT 55 No connection No connection SLOT IN 56 No connection MATRIX4 OUT (V2.5 and later) SLOT OUT 56 No connection No connection SLOT IN 57 No connection No connection SLOT IN 58 No connection STEREO L Output SLOT OUT 57 Tio1608-D UNIT ID 1: OUTPUT7, Tio1608-D UNIT ID 2: OUTPUT7 STEREO R Output SLOT OUT 58 Tio1608-D UNIT ID 1: OUTPUT8 Tio1608-D UNIT ID 2: OUTPUT8 No connection SLOT IN 59 No connection No connection SLOT IN 60 No connection No connection SLOT IN 61 No connection SUB Output SLOT OUT 59 No connection No connection SLOT IN 62 No connection No connection SLOT OUT 60 No connection No connection SLOT IN 63 ST IN 2L Input Select MONITOR L Output SLOT OUT 61 No connection No connection SLOT IN 64 ST IN 2R Input Select MONITOR R Output SLOT OUT 62 No connection No connection SLOT OUT 63 No connection No connection SLOT OUT 64 No connection * When quick config is turned off, this table also applies for mixer SLOT channels. - 93 - TF Series Reference Manual Reference Warnings and error messages Message Item Already Exists. Replace it? Message Description Displayed when you are about to store (overwrite) a Library. Description Unsupported File Format! You tried to read an unsupported file format from the USB memory. Storage Not Found! The USB memory could not be recognized. Couldn't Write File. The file could not be saved to the USB memory. File Protected! Could not overwrite the file on the USB memory because the file is write-protected. Already Exists! The name of the directory you tried to create matches the name of an existing directory. This message may also be displayed when editing a file or directory name. File Already Exists, Replace it? When using Save As, the name of the file you tried to save was the same name as an existing file. Displayed when you are about to save (overwrite) data. Exceed Maximum Number! Library A:XXXX items, Library B:XXXX items The Library exceeds the maximum number of items and cannot be loaded. File System is Not Ready. This Operation can Overwrite Existing Files or Directories. You tried to start recording immediately after connecting a USB storage device (i.e., while a list was being generated). You tried to change the name of a file or directory. Couldn't Access File. Could not access the file on the USB memory for some reason. File Error! An internal file access error occurred. Over Current Error! This USB Device is Not Supported. Please Disconnect. The USB device was disconnected because overcurrent was detected in the USB connection. Format Error! An error occurred during formatting. Tio OUTPUT is in Use by Another TF. "with OUTPUT" in Quick Config is Turned off. The OUTPUT of the Tio1608-D is already in use by a console using Quick Config, therefore the "with OUTPUT" in Quick Config was turned off for this console. USB Storage Unmounted! Recorder Stopped. Recording stopped because the USB memory was removed during recording. USB Storage Full! Recorder Stopped. Recording stopped because the USB memory became full during recording. Operation Failed! An error occurred during the operation. (This is a general error.) Less severe than "Unknown". (Between "Unknown" and "Ignore".) Maximum Number of Audio Files Exceeded! The number of files supported by the USB recorder was exceeded. Invalid Name! Name violates naming convention. USB Storage Busy: Recorder Stopped! Recording or playback stopped because time is required for a USB storage device process. Operation Ignored. The feature assigned to the knob was not operated. The operation had no effect. This message refers to Tips operations for User Defined Knobs. This message is displayed when the feature assigned to a User Defined Knob cannot be operated. Illegal Storage Format! Format USB Device with the Other USB Port. A USB memory device with an allocation unit size under 4096 bytes was connected. If you record in this situation, the format may become damaged. No data is stored in the Scene you tried to recall, or the data is damaged. Low Battery! The backup battery's voltage is low. SCENE #XX is Empty! Illegal IP Address! The IP address setting or gateway setting is incorrect. SCENE #XX is Read Only! You tried to overwrite a Scene that is write-protected. Cannot Store! Could not save the data in the Scene memory or in the Library. USB Sample Rate Mismatch on USB. Console:44100Hz Cannot Recall! Could not recall the data from the Scene memory or from the Library. The same rates of the console and the computer that is connected to the USB TO HOST connector are different. (Console: 44.1 kHz, PC; 48 kHz) Set the sample rate of the computer to 44.1 kHz. Operation Failed. Library X Memory Full. You tried to add data when the memory was full. A or B will be entered into X. USB Sample Rate Mismatch on USB. Console:48000Hz Wrong Word Clock! (Slot) The sample rate setting of the NY64-D is incorrect, therefore it cannot sync with the console. The same rates of the console and the computer that is connected to the USB TO HOST connector are different. (Console: 48kHz, PC; 44.1kHz) Set the sample rate of the computer to 48kHz. Turn Off 1-knob Mode to Adjust. 1-knob mode is enabled; turn 1-knob mode off. Two or More Devices Have Same Unit ID! Two or more devices connected to the NY64-D via the Dante network have the same UNIT ID. Nothing to Paste! You tried to paste data when the copy buffer was empty. Dante Module Error! An error occurred with the Dante module of the NY64-D or Tio1608-D. Cannot Bookmark This Screen. You tried to bookmark a screen that cannot be bookmarked. Illegal Dante Module MAC Address! The MAC address of the NY64-D is damaged and communication is not possible. Dante Module Memory Error! An memory error occurred with the Dante module of the Tio1608-D. Dante Audio Resource Overflow An excessive amount of audio data was sent over the Dante network connected to the NY64-D. Page Does not Exist. Cannot Close This Popup. Not Bookmarked. The item is not bookmarked. File Busy! Operation Denied. The operation could not be performed because the USB memory was being accessed. - 94 - TF Series Reference Manual Reference Message Description Message Under Synchronization Settings are bring performed for a Tio1608-D on the Dante network connected to the NY64-D. When the Tio1608-D is in Resume mode, this message may be displayed continuously on the SLOT SETUP screen. This is not a malfunction. Wrong Word Clock! (Dante Device) The sample rate setting of a device on the Dante network connected to the NY64-D is incorrect, therefore the device cannot sync to the NY64D. Linked at 10/100Mbps. Check Cables or Switches. A switch or cable that does not support Gigabit Ethernet is connected to the Dante network connected to the NY64-D. Error on the Dante Primary Port When using a redundancy network, an error has occurred on the PRIMARY network and the SECONDARY network is being used. Error on the Dante Secondary Port When using a redundancy network, an error has occurred on the SECONDARY network. Dante Patch or Setting Modified A setting that is different from the values determined by Quick Config has been set, perhaps by Dante Controller. Dante Setting Mismatch The UNIT ID switch on the Tio1608-D panel does not match the actual unit ID. This is displayed when you change the Tio1608-D's UNIT ID while the Tio1608-D is locked using Dante Device Lock, or when you change the switch after turning the unit on. Restart Tio to Complete Quick Config The Tio1608-D Device Config or other settings do not equal Quick Config values. Restart the Tio1608-D. No Option Card Installed There is no NY64-D card installed in the expansion slot. This message is displayed when the Quick Config button is ON and there is no NY64-D card installed. TF Controls First 24 Dante Devices Found The maximum number of I/O Racks (Tio1608-D, R series, etc.) on the Dante network connected to the NY64-D has been exceeded. TF Controls HAs of Maximum of 8 Dante Devices The maximum number of Dante devices with HA on the Dante network connected to the NY64-D has been exceeded. Unknown Option Card Installed! An unsupported card has been found in the console's expansion slot. Overcurrent Detected (Slot) Overcurrent was detected in the card installed in the expansion slot. Slot Communication Error! A communication error occurred in the card installed in the expansion slot. Dante Module Restarted! The Dante module of the NY64-D was restarted. Dante Setting Error! Please Restart the Console. An error occurred in the Dante module of the NY64-D that requires you to restart the console. If this message is displayed, restart the console. Dante I/O Device Disconnected A Dante device was disconnected from the NY64-D. Two or More HA Controllers may Cause Conflict More than one device on the Dante network can control the same device's HA, therefore operational conflicts may occur. This message is displayed every time the HA Control on the SLOT SETUP screen is turned on, but it does not indicate a malfunction. Description Dante devices are locked. Use Dante Controller to unlock devices. This is displayed when you touch the Quick Config button while the Tio1608-D or NY64-D are locked using Dante Device Lock. In this case, patching is not performed automatically by Quick Config, but it does not indicate a malfunction. Dante Controller (v3.10.0.19 and later) is required to unlock the devices. Permission Denied! The user does not have permission to perform the operation, therefore the operation was ignored. Operation ignored, you are not logged-in. The user is not logged in, therefore the operation cannot be performed. Incorrect password entered. The password that was entered is incorrect. - 95 - TF Series Reference Manual Index Index Numerics 1-knob COMP.................................. 1-knob EQ ....................................... Intensity ....................................... Loudness ..................................... Vocal............................................ F 55 50 50 50 50 Fader Calibration screen................. FADER section ............................... File information ............................... Footswitch....................................... FX screen (FX1/2, InsFX1–6) ......... A G ACCESS PERMISSION screen ...... 39 ASSIGN screen ............................... 63 Audio file.......................................... 14 Auto CH Select................................ 28 AUX1–AUX8 channels .................... 43 AUX9/10–19/20 channels................ 43 AUX9/10–AUX19/20.......................... 7 GainFinder ...................................... GATE screen .................................. Gateway.......................................... GEQ screen .................................... Group channels............................... C CH STRIP section ........................... 42 CH VIEW screen ............................. 64 Channel Color Calibration screen ... 83 COMP screen.................................. 55 Configuration screens ................. 5, 47 CUE................................................. 18 CUSTOM FADER BANK screen menu .............................................. 34 47 53 36 72 44 I Initialize (internal memory).............. Initialize (NY64-D)........................... Initialize All Memory screen ............ Initialize Current Memory screen .... Input channels................................. Input Port Trim screen .................... INPUT screen ................................. Internal clock................................... IP address....................................... 79 80 79 80 42 81 47 36 36 K D Daylight saving time (summer time) ................................ DCA ASSIGN screen ...................... DCA group....................................... DELAY screen................................. Digital gain....................................... Direct out ......................................... Displaying configuration screens..... O 82 44 17 31 57 Keyboard screen............................. 10 36 76 76 78 48 65 11 E EQ screen ....................................... 49 EQ screen menu ............................. 53 L Level meter ..................................... 13 Library ............................................... 8 Library screen ................................... 8 License information......................... 38 LOGIN screen ................................. 38 M Maintenance screen........................ MATRIX1–MATRIX4 channels ....... Menu ............................................... METER screen................................ Metering point ................................. Monitor ............................................ MONITOR screen ........................... MP3................................................. 79 43 10 13 13 18 18 14 U OMNI OUT....................................... OMNI OUT screen menu................. Oscillator.......................................... Output Port Trim screen .................. OUTPUT screen .............................. OVERVIEW screen ......................... OVERVIEW screen operations........ 22 22 20 81 74 42 44 P Peak Hold ........................................ 13 Phantom power ............................... 48 Phase .............................................. 48 PHONES jack .................................. 19 Playback .......................................... 14 Playback mode ................................ 17 Preset ................................................ 8 USER ACCOUNT screen................ 39 USER DEFINED KEYS ................... 29 USER DEFINED KNOBS ................ 29 V Version information ......................... 38 W Warnings and error messages ........ 94 WAV ................................................ 14 R Recall on/off checkboxes................... 8 RECORDER screen (INPUT/ OUTPUT/TITLE LIST screen) ........ 14 RECORDER screen menu .............. 18 Recording ........................................ 14 RTA display ..................................... 72 S SAVE/LOAD screen menu .............. Scene .............................................. SCENE screen ................................ SCENE screen menu ...................... SEND FROM screen ....................... Send pan ......................................... SEND TO AUX screen .................... SETUP screen................................. Stereo channels............................... Stereo link........................................ SUB channels.................................. Subnet mask.................................... 26 11 11 13 75 75 62 21 42 47 43 36 T Time stamp...................................... 37 Toolbar ............................................ 11 - 96 - TF Series Reference Manual Index I Operations and settings R A Access Applying access permissions ...... 40 B Button and slider operations............ 10 C Checking the input signals .............. Copying and pasting channel settings........................................... CUSTOM FADER BANK Recalling...................................... Custom fader bank Configuring .................................. 19 45 34 34 D DCA groups Assigning channels...................... 77 E Recall safe Using recall safe.......................... 25 Recalling a Preset............................. 9 Recalling a Scene ........................... 12 Recording Recording.................................... 17 S Setting Adjust the send level ................... Channel colors ............................ Compressor................................. Effects ......................................... Fader calibration ......................... Gate ............................................ Input ............................................ Insert effects................................ Oscillator ..................................... Output ......................................... PREFERENCE screen................ SEND FROM level ...................... SEND TO AUX level ................... Stereo link, input source.............. 75 83 56 58 82 54 15 58 20 16 29 75 63 48 Editing a Preset ................................. 9 Editing a Scene ............................... 12 EQ 1-knob EQ mode ......................... 51 GEQ............................................. 73 HPF ............................................. 52 LPF .............................................. 52 Manual mode............................... 51 F Feature assignments Assigning to footswitch ................ 33 Assigning to [USER DEFINED KEYS] .......................................... 32 Assigning to [USER DEFINED KNOBS] ....................................... 33 P Playback Files on USB storage device ....... 18 - 97 - TF Series Reference Manual Product dimensions Product dimensions TF5 TF3 225 599 599 225 716 866 TF1 TF1 rack mount (14U) 224 599 599 225 480 510 - 98 - Unit: mm TF Series Reference Manual Product dimensions TF-RACK 409 374 35 22 396 368 430 132 480 Unit: mm - 99 - TF Series Reference Manual &20%2-$&. *$,175,0 86%,1 6/27,1 3UH+3) (4287 *$7(287 &203287 3RVW)$'(5 0(7(5 0(7(5 0(7(5 0(7(5 0(7(5 ,1387 6(/(&7 $' 3UH'* 0(7(5 䃅 ',*,7$/ *$,1 3UH'* *50(7(5 *50(7(5 *$7( &203 %$1' (4 +3) 3UH+3) 3RVW(4 )$'(5 '&$ 3UH)$'(5 3RVW)$'(5 72$8; $8; 0212 72$8; 21 3UH)$'(5 3RVW)$'(5 &8(/ &8(5 67/ 675 68% ); ); 3RVW3$1/ 3RVW3$15 ); 6(1' 21 3UH)$'(5 3RVW)$'(5 67 6(1' 21 3UH)$'(5 3RVW)$'(5 68% 3$1 21 72);); 68%/(9(/ ,1387 7) ,1387 7) ,1387 7) 86%287 $8; $8; $8; 9 21 ',5(&7287 3UH'* 3UH+3) 3UH)$'(5 3RVW)$'(5 &+ 3$1/,1. >,1387@ 7) >,1387@ 7) >,1387@ 7) $8; $8; $8; $8; Block diagram $8; 6(1' 3$1 $8; 6(1' 3$1 $8; $8; 67(5(2 $8; 72$8; 21 3UH)$'(5 3RVW)$'(5 $8; &8( &8( 3UH)$'(5 '&$&8(䠅 3RVW3$1/ 3RVW3$15 &+ 7)7) ,1387 6(/(&7 ,1387 7) ,1387 7) 68%/(9(/ 3UH'* 3UH+3) 0(7(5 0(7(5 䃅 86%,1 6/27,1 ',*,7$/ *$,1 3UH'* (4287 0(7(5 3UH+3) >67,1@ %$ 67,1/ $' G%9 %$ 6DPHDV&+ 72$8; 6DPHDV&+ 72$8; 6DPHDV&+ &8( 6DPHDV&+ (4287 0(7(5 $' G%9 %$ ,13876(/(&7 $8; 0212 3UH)$'(5/ 3RVW)$'(5/ 3UH)$'(55 3RVW)$'(55 86%,1 $8; 67(5(2 72$8; 6/27,1 6(1' 3UH)$'(5/ 3RVW)$'(5/ 3UH)$'(55 3RVW)$'(55 $8; 21 6(1' 3$1 21 6(1' 3$1 $8; $8; $8; $8; 3UH)$'(5/ 3UH)$'(55 '&$&8(䠅 3RVW)$'(5/ 3RVW)$'(55 3UH(4 0(7(5 (4287 0(7(5 3267)$'(5 0(7(5 )$'(5 '&$ 68%/(9(/ 68% 67 21 %$1' (4 %$/ 3UH)$'(5/ ); $8; $8; $8; $8; &8( &8( );571 ); 6(1' 21 3UH)$'(5/5 3RVW)$'(5/5 86%,1 6/27,1 3RVW)$'(5/5 3RVW)$'(5/ 3RVW)$'(55 21 3UH)$'(5/5 3RVW)$'(5/5 72$8; 67,15 67 3UH)$'(5/5 3UH)$'(55 3UH)$'(5/ ); 68% %$/ 72);); %$ 68%/(9(/ 21 %$1' (4 3/$<%$&./ >67,1@ 3267)$'(5 0(7(5 )$'(5 '&$ 3/$<%$&.5 67,1/ 67 3$1 3RVW)$'(5 72);); 3UH(4 0(7(5 3UH'* 0(7(5 ',*,7$/ *$,1 67,15 0(7(5 21 35()$'(5 67,1 ,13876(/(&7 )$'(5 '&$ %$1' (4 +3) 68% 3RVW)$'(5 3UH)$'(5/5 3UH)$'(55 72$8; 6DPHDV67,1 72$8; 6DPHDV67,1 &8( 6DPHDV67,1 3RVW)$'(5/5 3RVW)$'(5/ 3RVW)$'(55 7)0L[HU%ORFN'LDJUDP 0$75,; 0$75,; 0$75,; 0$75,; &8(/ &8(5 67/ 675 68% ); ); $8; $8; $8; $8; $8; $8; $8; 26&,//$725 /(9(/ 6LQH:DYH 3LQN1RLVH %XUVW1RLVH 21 68% 675 67/ 26& 0(7(5 67(5(2 3UH(4 0(7(5 $8; (4287 0(7(5 *(4287 0(7(5 %$1' (4 $8; )OH[*(4 &8( *50(7(5 &203 3UH)$'(55 3RVW)$'(5/ $8; 3RVW)$'(55 720$75,; 3267)$'(5 0(7(5 21 %$/ *$,1 67(5(2287/ 䃅 䃅 67(5(22875 3UH)$'(5/ $8; $8; &203287 0(7(5 )$'(5 0$75,; 6(1' 0$75,; 6(1' 75,0 $8; >201,287@ G%X 75,0 $8; '$ '$ >201,287@ G%X 68% (4287 0(7(5 35(/3) 0(7(5 /3) 720$75,; *50(7(5 %$1' (4 &203287 0(7(5 )$'(5 3267)$'(5 0(7(5 21 &203 &8( 3UH)$'(5 0$75,; 3RVW)$'(5 6(1' 75,0 68%287 䃅 *$,1 '$ >201,287@ G%X $8; >86%72+267@ 86%,) >L3DG@ (4287 0(7(5 5(&/ %$1' (4 5(&5 &8( 86%,1 720$75,; 0(7(5 5(&/ 86% +267 ,) 3UH(4 0(7(5 ',5(&7287 *50(7(5 )OH[*(4 &203287 0(7(5 )$'(5 3267)$'(5 0(7(5 21 &203 75,0 3UH)$'(5 0$75,; 3UH(4 0(7(5 *50(7(5 %$1' (4 3/$<%$&./ 3/$<%$&.5 3/$<%$&./HYHO >201,287@ G%X 3RVW)$'(5 6(1' (4287 0(7(5 '$ $8;287 $8;287 $8;287 䃅 *$,1 $8; &8( 5(&5 6DPSOH5DWH &RQYHUWRU *(4287 0(7(5 &203287 0(7(5 3267)$'(5 0(7(5 )$'(5 ,16(57 ())(&7 &203 &8( 35()$'(5 0(7(5 201,2873$7&+ 21 %$/ *$,1 䃅 $8; 287 $8;287 $8; 287 $8;287 䃅 3UH)$'(5/ 3UH)$'(55 67 0$75,;287 DV6/27287 6(1' $8;287 DV6/27287 6/27 68% ',5(&7287 DV6/27287 67(5(2287/568%287021,725287 DV6/27287 720$75,; 6/27,1 DV&+,1387V 0$75,; 6(1' 0$75,; 6(1' 6/27,1 DV&+,1387V 7)7) 6/27,1 DV67,1,1387V 0$75,; 3UH(4 0(7(5 (4287 0(7(5 %$1' (4 &+3UH)$'(5 &+3UH)$'(5 7)7) 67,13UH)$'(5 );5713UH)$'(5 $8;3UH)$'(5 $8; 3UH)$'(5 6768%3UH)$'(5 0$75,; 21 '(/$< &8( 3267)$'(5 0(7(5 35()$'(5 0(7(5 )$'(5 *$,1 0$75,;287 0$75,;287 0$75,;287 0$75,;287 䃅 3UH)$'(5 3RVW)$'(5 021,725&8( ,1387 6(/(&725 57$ 67(5(2287 68%287 67,1 67,1 3/$<%$&. 86%,1 &8(/2*,& 0212 021,725 6(/(&7 0(7(5 021,725/(9(/ 21 021,725287/ '(/$< 021,7252875 '$ '$ 3+21(6/(9(/ 67/3UH)$'(5 6753UH)$'(5 $8;3UH)$'(5 $8;3UH)$'(5 $8;3UH)$'(5 5(&/(9(/ >3+21(6@ 0(7(5 5(&/ 5(& 6(/(&7 5(&5 &8( 7)0L[HU%ORFN'LDJUDP $' *$,175,0 86%,1 6/27,1 3UH+3) (4287 *$7(287 &203287 3RVW)$'(5 0(7(5 0(7(5 0(7(5 0(7(5 0(7(5 ,1387 6(/(&7 䃅 ',*,7$/ *$,1 3UH'* *50(7(5 *50(7(5 *$7( &203 %$1' (4 +3) 3UH+3) 3RVW(4 )$'(5 '&$ 3UH)$'(5 3RVW)$'(5 72$8; $8; 0212 72$8; 21 3UH)$'(5 3RVW)$'(5 &8(/ &8(5 67/ 675 68% ); ); 3RVW3$1/ 3RVW3$15 ); 6(1' 21 3UH)$'(5 3RVW)$'(5 67 6(1' 21 3UH)$'(5 3RVW)$'(5 68% 3$1 21 72);); 68%/(9(/ $8; $8; $8; $8; $8; $8; $8; 3UH'* 0(7(5 &20%2-$&. 86%287 9 21 ',5(&7287 3$1/,1. 3UH'* 3UH+3) 3UH)$'(5 3RVW)$'(5 &+ >,1387@ $8; 6(1' 3$1 $8; 6(1' 3$1 $8; $8; 67(5(2 $8; 72$8; 21 3UH)$'(5 3RVW)$'(5 $8; &8( &8( 3UH)$'(5 '&$&8(䠅 3RVW3$1/ 3RVW3$15 67,1 >67,1@ ,13876(/(&7 %$ $' G%9 3UH(4 0(7(5 3UH'* 0(7(5 3267)$'(5 0(7(5 %$/ 3/$<%$&./ 72);); ,13876(/(&7 21 3UH)$'(5/5 3RVW)$'(5/5 72$8; $8; 0212 3UH)$'(5/ 3RVW)$'(5/ 3UH)$'(55 3RVW)$'(55 86%,1 $8; 67(5(2 72$8; 6/27,1 6(1' 3UH)$'(5/ 3RVW)$'(5/ 3UH)$'(55 3RVW)$'(55 $8; 21 6(1' 3$1 21 6(1' 3$1 $8; $8; $8; $8; $8; $8; $8; $8; &8( &8( 3UH)$'(5/ 3UH)$'(55 '&$&8(䠅 3RVW)$'(5/ 3RVW)$'(55 );571 ); 6(1' 21 3UH)$'(5/5 3RVW)$'(5/5 86%,1 6/27,1 3RVW)$'(5/5 3RVW)$'(5/ 3RVW)$'(55 3UH)$'(5/5 3UH)$'(55 3UH)$'(5/ 3UH(4 0(7(5 (4287 0(7(5 3267)$'(5 0(7(5 )$'(5 '&$ 68%/(9(/ 68% 67 21 %$1' (4 %$/ 3UH)$'(5/ ); 68% 67 21 %$1' (4 3/$<%$&.5 ); 68%/(9(/ )$'(5 '&$ ',*,7$/ *$,1 %$ (4287 0(7(5 3UH)$'(5/5 3UH)$'(55 72$8; 6DPHDV67,1 72$8; 6DPHDV67,1 &8( 6DPHDV67,1 3RVW)$'(5/5 3RVW)$'(5/ 3RVW)$'(55 7)5$&.0L[HU%ORFN'LDJUDP 0$75,; 0$75,; 0$75,; 0$75,; &8(/ &8(5 67/ 675 68% ); ); $8; $8; $8; $8; $8; $8; $8; 26&,//$725 /(9(/ 6LQH:DYH 3LQN1RLVH %XUVW1RLVH 21 68% 675 67/ 26& 0(7(5 67(5(2 3UH(4 0(7(5 (4287 0(7(5 $8; *(4287 0(7(5 %$1' (4 $8; )OH[*(4 &8( *50(7(5 &203 3UH)$'(55 3RVW)$'(5/ $8; 3RVW)$'(55 720$75,; 3267)$'(5 0(7(5 21 %$/ *$,1 67(5(2287/ 䃅 䃅 67(5(22875 3UH)$'(5/ $8; $8; &203287 0(7(5 )$'(5 0$75,; 6(1' 0$75,; 6(1' 75,0 $8; >201,287@ G%X 75,0 $8; '$ '$ >201,287@ G%X 68% (4287 0(7(5 35(/3) 0(7(5 /3) *50(7(5 %$1' (4 3267)$'(5 0(7(5 21 &203 &8( 720$75,; &203287 0(7(5 )$'(5 68%287 䃅 *$,1 3UH)$'(5 '$ >201,287@ G%X 3RVW)$'(5 6(1' 0$75,; 75,0 $8; >86%72+267@ 86%,) >L3DG@ (4287 0(7(5 5(&/ %$1' (4 5(&5 &8( 720$75,; 86%,1 0(7(5 5(&/ 86% +267 ,) 3UH(4 0(7(5 ',5(&7287 *50(7(5 )OH[*(4 &203287 0(7(5 )$'(5 3267)$'(5 0(7(5 21 &203 $8;287 $8;287 $8;287 䃅 *$,1 3UH)$'(5 3RVW)$'(5 6(1' 0$75,; $8; &8( 3UH(4 0(7(5 5(&5 (4287 0(7(5 *50(7(5 %$1' (4 3/$<%$&./ 6DPSOH5DWH &RQYHUWRU *(4287 0(7(5 3/$<%$&.5 3/$<%$&./HYHO &203287 0(7(5 35()$'(5 0(7(5 )$'(5 ,16(57 ())(&7 &203 3267)$'(5 0(7(5 21 %$/ *$,1 䃅 $8; 287 $8;287 $8; 287 $8;287 䃅 &8( 201,2873$7&+ 75,0 '$ >201,287 @ 75,0 '$ >201,287@ >201,287@ 75,0 '$ 67 0$75,;287 DV6/27287 6(1' $8;287 DV6/27287 6/27 68% ',5(&7287 DV6/27287 67(5(2287/568%287021,725287 DV6/27287 720$75,; 0$75,; 6(1' 0$75,; 6(1' 6/27,1 DV&+,1387V 6/27,1 DV67,1,1387V 0$75,; 3UH(4 0(7(5 35()$'(5 0(7(5 )$'(5 (4287 0(7(5 %$1' (4 '(/$< &8( 3267)$'(5 0(7(5 21 *$,1 0$75,;287 0$75,;287 0$75,;287 0$75,;287 䃅 3UH)$'(5 3RVW)$'(5 &+3UH)$'(5 67,13UH)$'(5 );5713UH)$'(5 $8;3UH)$'(5 $8; 3UH)$'(5 6768%3UH)$'(5 0$75,; 021,725&8( ,1387 6(/(&725 57$ 67(5(2287 68%287 67,1 3/$<%$&. 86%,1 &8(/2*,& 0212 021,725 6(/(&7 0(7(5 021,725/(9(/ 21 021,725287/ '(/$< 021,7252875 '$ '$ 3+21(6/(9(/ 67/3UH)$'(5 6753UH)$'(5 $8;3UH)$'(5 $8;3UH)$'(5 $8;3UH)$'(5 5(&/(9(/ >3+21(6@ 0(7(5 5(&/ 5(& 6(/(&7 5(&5 &8( 7)5$&.0L[HU%ORFN'LDJUDP Yamaha Pro Audio global website Yamaha Pro Audio global website http://www.yamahaproaudio.com/ http://www.yamahaproaudio.com/ Yamaha Downloads Yamaha Downloads http://download.yamaha.com/ http://download.yamaha.com/ Manual Development Group Manual Development Group © 2015 Yamaha Corporation © 2015 Yamaha Corporation Published 01/2017 CR-F0 Published 01/2017 CR-F0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Print high-res Author : Manual Development Group, Yamaha Corporation Create Date : 2016:12:20 09:23:42+09:00 Modify Date : 2017:01:16 19:23:59+09:00 XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:01:16 19:23:59+09:00 Format : application/pdf Title : TF5 TF3 TF1 TF-RACK V3.1 Reference Manual Creator : Manual Development Group, Yamaha Corporation Document ID : uuid:a704b106-4275-465b-b37b-da815e48416c Instance ID : uuid:d92e1b45-ceb0-4bdd-b7fd-c62e70e94bb6 Page Mode : UseOutlines Page Count : 104EXIF Metadata provided by EXIF.tools