Yepzon YPZN1-20 GPS Tracker User Manual DRAFT Y1CC QuickStart

Download:
Mirror Download [FCC.gov]
Document ID	4114364
Application ID	DlARmn5UVCHUD/qZOcIasA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	176.79kB (2209899 bits)
Date Submitted	2018-12-23 00:00:00
Date Available	2018-12-23 00:00:00
Creation Date	2018-02-05 17:00:38
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-12-05 16:03:44
Document Title	DRAFT_Y1CC_QuickStart
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

GETTING STARTED
SETTINGS
DATAUSAGE
LOCATING
When you first start using your Yepzon tracker, plug
it into a charger and if possible, charge it for two
hours. This ensures that the device wakes up
and has optimal performance.
ln the Settings you are able to control the
following functions:
Yepzon tracker has a built-in SIM card and it
uses mobile data to transfer positioning information
to the mobile app.
Yepzon One 2.0 uses GSM, GPS and Wi-Fi
for positioning. In the app you can always see the
last known location based on either GSM cell
towers or WiFi hotspots.
A recommended precaution is to request a reset link
from the Settings. This is a link to your e-mail that
enables you to pair the tracker again if, for
example your phone breaks or you accidentally delete the
app. Your e-mail address is not collected, saved or used
by Yepzon for anything else than sending the reset link.
After pairing you should see your tracker in the
App either on a list or map view and you are able to
toggle between
the
views
from
the
top
right corner icon. List view shows current status
of the device, map view shows the last location of the
Yepzon tracker on a map.
• Set connection intervals = The tracker wakes up
to connect the cloud service only at set intervals, i.e.
it's not "online" all the time. Battery consumption
depends on these connection intervals and the
activity/movements of the device.
• Manage access rights = Adding and allowing more
users to locate and manage the Yepzon tracker. Note:
All users will have full access.
• Edit notifications = Decide what Yepzon activity
you want to be notified about.
• Turn off the Yepzon = Shuts down the tracker.
Note! After shutdown the tracker requires a charger
to be plugged in to turn on and wake up.
Your tracker includes 1 month of free data to start with,
after which you can easily purchase more via application
Settings ➔ Purchase more data or yepzon. com/shop. We
recommend
purchasing
the
pre-paid
monthly subscription as it includes unlimited usage.
lf you want to use your tracker outside EU, USA and
China, you must buy roaming through Yepzon app
Settings ➔ Purchase roaming package. Price depends on
country and length of visit. Countries applicable and
prices can be found on yepzon.com/roaming.
Yepzon One 2.0 locates accurately on demand. Each
session lasts three minutes and can be repeated
sequentially as many times as needed. To activate the
GPS/WiFi positioning,
tap
"Locate accurately".
Time for accurate positioning to start depends on
settings. The longer the connection interval, the
longer the time required to start the locating.
Example: Connection interval is 5 minutes. The last
connection was at 12:00. The user taps the Locate
accurately icon at 12:01. Yepzon starts tracking after four
minutes, at 12:05.
Accuracy of the position can be checked by tapping the
location pin on the map, e.g. 2 km means that the real
position is not in the center of the red circle but
anywhere within the radius of 2 km. A typical GSM tower
accuracy is from a few hundred meters to several
kilometers, whereas GPS accuracy is typically 5-15 m
and WiFi 15-50m. If GPS signal is not strong enough (e.g.
indoors) and WiFi hotspots are not present, a rough
position based on GSM towers is shown.
More information, FAQ, announcements etc. available at
YEPZON.COM/SUPPORT
Please read carefully the Safety and Compliance leaflet
and content printed inside the packaging sleeve.
Note! Over six months of tracker inactivity may cause
SIM card deactivation and/or battery deep discharge.
Yepzon ONE 2.0 - QUICK START
Safety and Compliance
Switch off the Yepzon in places where the use of cellular phones is not permitted or where it can create
interference, for example, onboard airplanes, in the vicinity of medical equipment, and at blasting sites.
Wireless devices are sensitive to interference, which can impair the functionality of the device.
The device is splash-proof but it is not designed to be worn when swimming, nor drop it underwater.
Do not subject the device to blows or drop it on hard surfaces.
The device is designed to be used at temperatures of -10 – +40°C. Coldness may impair the battery
capacity. Do not subject the device to great temperature variation so as to prevent condensation from
forming inside the device.
The device includes an integrated rechargeable battery, which cannot be removed. You should not
dispose of the device with household waste. Instead, return it to the place of purchase or to a recycling
point. You can check the location of the nearest recycling point from the local waste management authorities. Do not attempt to remove or modify the battery as this may damage the device and create a
hazard.
Only use standard undamaged chargers equipped with a Micro USB connector. Avoid using excessive
force when plugging the connector into a port.Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment
and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This product meets applicable national SAR limits of 1.6W/kg. The specific maximum SAR values can
be found at yepzon.com/support. When carrying the product or using it while worn on your body,
either use an accessory such as a holster or otherwise maintain a distance of 0,5 cm from the body
to ensure compliance with RF exposure requirements.
This product does not contain any user-serviceable parts. Changes or modifications made to this
equipment not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
You can read more on safety at www.yepzon.com/support.
You can find the manufacturer’s Declaration of Conformity at www.yepzon.com/legal.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:02:05 17:00:38+02:00
Creator                         : Adobe InDesign CC 13.0 (Macintosh)
GTS PDFX Version                : PDF/X-4
Modify Date                     : 2018:12:05 16:03:44+08:00
Has XFA                         : No
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Metadata Date                   : 2018:12:05 16:03:44+08:00
Instance ID                     : uuid:80b5be0a-c0c1-4ec6-b655-4c4ccd2d5131
Original Document ID            : xmp.did:34d647f7-4ae3-46f8-b24b-8559f5a989d9
Document ID                     : xmp.id:a8f71971-e215-417c-8e21-ac94c16c87d0
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:b3b74239-25ed-4187-b906-3310dc14e729
Derived From Document ID        : xmp.did:3b5d71cf-3f5f-44aa-82f5-5e09b2a18b2d
Derived From Original Document ID: xmp.did:34d647f7-4ae3-46f8-b24b-8559f5a989d9
Derived From Rendition Class    : default
History Action                  : converted, editedScannedDoc, editedScannedDoc, editedScannedDoc, editedScannedDoc
History Parameters              : from application/x-indesign to application/pdf, Page:1, Page:1, Page:1, Page:1
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:02:05 17:00:38+02:00, 2018:11:29 11:09:01+02:00, 2018:11:29 12:32:07+02:00, 2018:11:29 12:51:34+02:00, 2018:11:29 12:55:40+02:00
Format                          : application/pdf
Title                           : DRAFT_Y1CC_QuickStart
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Schemas Namespace URI           : http://ns.adobe.com/pdf/1.3/
Schemas Prefix                  : pdf
Schemas Schema                  : Adobe PDF Schema
Schemas Property Category       : internal
Schemas Property Description    : A name object indicating whether the document has been modified to include trapping information
Schemas Property Name           : Trapped
Schemas Property Value Type     : Text
Page Count                      : 4
AI Creator Version              : 18.1.1
For                             : Antti Eloheimo,
Bounding Box                    : 29 -248 525 -11
AI Build Number                 : 446
AI Color Usage                  : Color
AI Ruler Units                  : Millimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Container Version               : 11
Creator Version                 : 18
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools