ZIF LATINOAMERICA Z18 1.77 inch feature phone User Manual Z18

Download:
Mirror Download [FCC.gov]
Document ID	2699799
Application ID	lE3/zT+SuyM2QcjTgJxHpA==
Document Description	UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.89kB (223600 bits)
Date Submitted	2015-07-31 00:00:00
Date Available	2015-07-31 00:00:00
Creation Date	2015-07-13 19:25:53
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-07-27 14:20:39
Document Title	Microsoft Word - Z18_User manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	lenovo

User Manual Z18
Dear Customer,
Thank you for purchasing Z18.Kindly read this user
manual carefully to learn about key functional
characteristics and operational methods of this mobile
phone.
Contents
Safety and
precautions ....................................................................2
II
Operation of menu function...................................4
III
Application of USB storage function.....................5
IV
Troubleshooting ....................................................6
I. Safety and Precautions:
To use your Z18 phone safely and effectively, please read
the following information before use:
Please turn off your phone when you are near a
chemical plant, a gas station, an oil depot or other
explosives.
To ensure safety, please use earphone during driving;
Otherwise, unless emergency, make a call after parking
your car by the roadside. DO NOT use the phone during
driving at high speed.
Do not use your cell phone while in a plane. Please
check whether Flight mode is set or not before boarding.
Do not use your cell phone in a hospital to avoid
interference with the normal operation of medical
equipment which may result in a medical accident. If the
cell phone is used near a pacemaker, audiphones and some
medical electronic equipment, you should pay special
attention that the cell phone may interfere with these
devices.
Auxiliaries and accessories not provided by us are
excluded from the guarantee.
Do not dismantle your cell phone by yourself. In case
of a failure, please contact the service station specified by
us. Only qualified person may install or repair this product.
The phone should be charged in the environment
which is well-ventilated, and should be kept away from
inflammable substances and explosives.
To avoid demagnetization, please keep your phone away
from magnetic substances, such as magnetic disk, credit
card, etc.
Please be sure the phone isn't exposed to any liquid. In
Case this situation occurs, please remove the battery and
contact the service station specified by us.
Please use your phone in the environment which is neither
too hot nor too cold, do not expose your phone in strong
sunlight and in high-humidity environment.
All wireless devices may be susceptible to
interference, which could affect performance.
Your cell phone has photo and record functions, please
use these functions following the related laws and
regulations. You may violate the laws and regulations if
you take photos and record without authorization.
 Do not dispose the worn battery as common domestic
rubbish. Please dispose the worn battery according to the
specified instructions where the disposal of a worn battery
is clearly specified.
Note: The Company will not undertake any responsibility
for any consequences caused by failure to observe the
above-mentioned suggestions or improper applications.
If any content described in this manual goes against that of
your cell phone, it is subject to the real cell phone.
II. Operation of menu functions:
In the standby mode, select Menu and the desired menu
and submenu. Select Exit or Back to exit the current level
of menu. Press the end key to return to the standby mode
directly.
1. Messages:
The SMS function is a network service. You may need
to apply to the network operator first before you can
send and receive a message.
2. Phonebook:
You can add the new contact by selecting menu “Add
new contact”.
You can save the contacts in the mobile phone and SIM
card, it depends on the SIM card memory capacity.
3. Call History:
You can view the call history (Missed, dialled, received
calls) through this option.
4. Settings:
 This menu option lets you view and edit your phone
settings, call, display, network and security settings
 The default password for Phone lock, Privacy &
Restore factory settings is “1234” you can personalize
the password.
5. Multimedia:
In this menu option you can access your camera, video
recorder/player, audio player and sound recorder. You
can view the clicked images in image viewer.
6. File manager:
This menu enables you to access the File Manager,
where folders or files in the memory card can be managed
Caution: You will lose all the data stored in the
memory card after format.
7. FM radio:
A compatible headset needs to be attached to the device
for the FM radio to function
8. Organizer:
This menu option enables you to use your phone’s alarm,
calendar, calculator, Sound recorder, Alarm, STK and Torch
etc.
9. User profiles:
You could set different scene modes.
--Normal
--Silent
--Meeting
--Indoor
--Outdoor
--Flight Mode
You could active, settings, rename or enhance ring.
10. Services:
Phone supports STK function (But it requires support
from SIM card service provider)
11. Games:
Fun & Games option lets you play games provided in
the phone.
**
The language converter/software may not produce the
accurate translation as desired by the user and hence
company disowns any results/liability arising therefrom.
III. Application of USB storage function:
Note: The phone can use USB function (like charging)
under switched off mode.
In switch off mode, when you plug in the USB cable,
you need not select function; the phone can be connected to
the PC and used as a USB Flash Disk. You can also use the
USB cable as a charger.
In switch on mode, when you plug in the USB cable,
you need to select the “Mass storage” function; the phone
can be connected to the PC and used as a USB Flash Disk.
You can also use the USB cable as a charger.
IV. Troubleshooting:
Failure
Solution
The Phone fails 1.Check that the battery is charged;
to power on
2.Check that the battery is installed correctly.
1.Check whether the SIM card is dirty, if card is
dirty, clean it;
Insert SIM card
2.Reinstall the SIM card;
error
3.If the SIM card is damaged replace the SIM
card.
Check the signal strength indicator on the
Low Network
screen. 4 bars indicates strong signal and 2 bars
or less indicate poor signal.
1.You might have set the Hide Caller ID but the
network operator does not support this service;
2.There may be strong signal interference;
Call registration
3.You might have activated the Call Barring
fails
function;
4.You might have activated Line 2 but the
network operator may not support this service.
1. The battery may have excessively discharged
Battery fails to To charge the battery it is necessary to connect
charge
it to a charger for certain period of time;
2.The battery may have been deteriorated.
1.Check whether signal is too weak or wireless
interference exists around;
Cannot connect 2.Check whether the SIM card is installed
to the network correctly, poor connection exists or the SIM
card is damaged. If the SIM card is damaged
please contact the network operator.
Photos shot are 1. The brightness is set too low;
too dark
2. The ambient light is too dark.
Photos shot are 1. The object shot is moving;
too blurred
2. Your hand shakes when shutter is pressed.
Photos shot are
The object shot is too close to the lens.
distorted
Cannot access
The SIM card may not support the service.
the service menu
Specific Absorption rate (Safety Precautions) :a)
Use A wireless hands-free system (headphone,
headset) with a low power emitter.
b)
Keep your calls short or send a text message(SMS)
instead. This advice applies especially to
children ,adolescents and pregnant women.
c)
Use cell phone when the signal quality is good.
d)
People having active medical implants should
preferably keep the cell phone at least 15cm away from the
implant.
Warning:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gra
m of tissue.
Device types Z18 (FCC ID: 2AE58Z18) has also been tested
against this SAR limit. The highest reported SAR values for
head, body-worn
accessory, and product specific are 0.14 W/kg, 0.99 W/kg respec
tively. This device was tested for typical bodyworn operations with the back of the handset
kept 15mm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain a 15mm
separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements, and should be
avoided.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : lenovo
Create Date                     : 2015:07:13 19:25:53+08:00
Modify Date                     : 2015:07:27 14:20:39+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - Z18_User manual
Creator                         : lenovo
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:07:27 14:20:39+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:f34ed528-0124-4a9b-a021-0de18d59635e
Instance ID                     : uuid:5147d7f2-bbb8-4ec8-ba2e-94f8f048673a
Page Count                      : 8

EXIF Metadata provided by EXIF.tools