ZMODO Technology H2404 Breeze User Manual 1
ZMODO Technology Shenzhen Corp. Ltd. Breeze 1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3937185 |
| Application ID | CJth0LoFyL+t5fkV1A1zdQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 85.24kB (1065510 bits) |
| Date Submitted | 2018-07-24 00:00:00 |
| Date Available | 2018-07-24 00:00:00 |
| Creation Date | 2018-07-12 11:09:02 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2018-07-12 15:32:26 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Sharon liu |
SD-H2404-A REV-A00 Size：90*130mm Pantone 306C 1 Getting to know your Smart Vent What’s in the box: Once you see the status light shows solid purple, Smart Vent is successfully paired with Tune. 2 Preparations before configuring: Charge the battery: Zmodo Smart Vent is designed to work with Zmodo Tune and Room Sensor to make each room have the exactly temperature as you like. It helps to delivery the comforts to each room and also reduce the energy cost by regulating each room’s temperature. If you have paired multiple Smart Vent with Tune, please make sure to add each Smart Vent to Tune or to corresponding Room Sensor. For more information, please see the "How to add each Smart Vent to corresponding Room Sensor?" FAQ on the Zmodo Support Page. Smart Vent is powered on by the included rechargeable battery. Before you configure the Smart Vent, please make sure the battery is fully charged. You will be able to view the battery status from the Zmodo app when the Smart Vent is in use. Rechargeable Battery(2) Smart Vent Controller Charging Pad Plug in the charging pad to a power outlet using the included USB power adapter. Place the rechargeable battery onto the charging pad. Refer to the status light on the Charging Pad to make sure the rechargeable battery is properly placed and charging. Insert your Smart Vent in place of your old vent, and mark the appropriate holes. Drill two holes slightly smaller than the wall anchors and use a hammer to gently insert the anchors into the wall. Fasten the two screws through the holes on the Smart Vent bracket and into the anchors as shown. Put the faceplate back to the Smart Vent securely. 5 Status Light Definition Solid Green The battery is properly installed. Flashing Green & Flashing Purple Smart Vent is trying to pairing with Tune, it will flashing green twice and then flashing Purple. Solid Purple Smart Vent is successfully paired with Tune. 4 Install the Zmodo Smart Vent Flashing Orange Remove the existing floor, wall, or ceiling vent where you want to install your Smart Vent. When HVAC is set in heating mode, the status light will flashing Orange for around 5 seconds, then off. Note：Align the battery with the grooves on the charging pad. Flashing Blue Smart Vent Status Light Battery Cover BatteryPopupTab Fan Blade Start Guide Quick When HVAC is set in cooling mode, the status light will flashing blue for around 5 seconds, then off. Power Adapter Smart Vent Quick Start Guide Screwdriver Flashing White When HVAC is set in fan only mode, the status light will flashing white for around 5 seconds, then off. Pair and Reset Button Quick Start Guide Anchors & Screws(3) Note：If you want to take out the battery from Smart Vent to recharge, open the battery cover by pressing down on the tab, and then pull up the tab as shown, the battery will pop up a little so that you can take it out. Charging Pad Status Light Definitions Solid Red The charging pad is powered on. If you were unable to pair Smart Vent with Tune, please try to reset Smart Vent and try again, please hold the button at the back of Smart Vent as shown for over 3 seconds to reset it. The battery is charging. Press here The battery is fully charged. Insert the battery to the Smart Vent Remove the magnetic faceplate. Please open the faceplace of Smart Vent from the side which you can find a 2 cm length slot and then remove it. 6 Support (FCC) Compliance Having difficulty? For more instructions, troubleshooting, support, and other resources, please visit: 2 Insert the battery. Open the battery cover by www.zmodo.com/support 3 Mobile Setup pressing down on the tab as shown. Insert the battery, making sure that the battery contacts are properly aligned, press the battery down to make sure is been properly placed and then close the battery cover. Once the battery is installed, the status light on the Smart Vent will be solid green. Like us on Facebook.com/Zmodo Scan the QR-code below! Open the Zmodo App, access your Tune's Device Settings page, and choose the "Accessories" option. Select the + Add Accessory option and follow the on-screen instructions. When the app prompts you to press a button, please press the button at the back of the Smart Vent as shown to pair it with your Tune. 11 7 Federal Communications Commission You can use the Live Chat function in Zmodo app if you have any technical problems. Please follow the steps below: Access the “Me” page in the bottom right corner of the Zmodo app and select “Zmodo Support”. Blinking Blue Solid Blue 10 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Follow us on Twitter @Zmodo Scan the QR-code below! Press here Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Apple Store is a service mark of Apple Inc. Front Side 12 13 14 Back Side REV-A00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Sharon liu Title : 未命名 -1 Create Date : 2018:07:12 11:09:02+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2018:07:12 15:32:26+08:00 Metadata Date : 2018:07:12 15:32:26+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:9ee2d58a-d25f-4941-aca6-66945f4553a9 Instance ID : uuid:2f905bce-6950-4461-9558-90af74ddc10a Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Author : Sharon liuEXIF Metadata provided by EXIF.tools