ZTE AC8700 CDMA 2000 EV-DO Wireless DATA Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	731835
Application ID	8dMLYYlSKbaLMuqMalPlEQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.72kB (558982 bits)
Date Submitted	2006-11-24 00:00:00
Date Available	2006-11-24 00:00:00
Creation Date	2006-11-24 20:05:26
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-11-24 20:05:26
Document Title	untitled
Document Creator	PScript5.dll Version 5.2
Document Author:	Bfit_W

CDMA2000 1X EV-DO Wireless Data Terminal User Guide
CDMA2000 1X EV-DO
Wireless Data Terminal
User Guide
This User Guide applies to Wireless Data Terminal of MG478 and AC8700.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Copyright Statement
Copyright © 2006 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
ZTE Corporation reserves the right to make modifications on print errors or update specifications
in this manual without prior notice.
V1.0, August, 2006
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Table of Contents
1.
2.
3.
4.
Introduction.............................................................................................................................1
Specification ...........................................................................................................................1
Precautions..............................................................................................................................1
Appearance .............................................................................................................................2
4.1 Introduction.........................................................................................................................2
4.2 Insert R-UIM Card ..............................................................................................................3
5. Install and Uninstall ................................................................................................................4
5.1Windows 2000 ...................................................................................................................5
5.1.1 Install........................................................................................................................5
5.1.2 Uninstall ...................................................................................................................9
5.2Windows XP ....................................................................................................................10
5.2.1 Install......................................................................................................................10
5.2.2 Uninstall .................................................................................................................14
6. Run the Application ..............................................................................................................15
7. Connect/Disconnect ..............................................................................................................16
8. Connection Records..............................................................................................................17
9. Setting ...................................................................................................................................18
10. Help ......................................................................................................................................20
11. Connect to the Website .........................................................................................................20
12. Trouble-shooting...................................................................................................................21
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
1. Introduction
Thank you for choosing MG478/AC8700 CDMA2000 1X EV-DO Wireless Data Terminal
(hereinafter referred to as Data Terminal) of ZTE Corporation.
The Data Terminal equips with a standard USB interface and supports both CDMA2000 1X
EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing
on the Internet, browse the web pages, and send & receive Emails
2. Specification
Model
MG478
Parameter
AC8700
Transmitting Frequency
452.625-456.850MHz
824-849MHz
Receiving Frequency
462.625-466.850MHz
869-894MHz
Stability
Fc±300Hz
Dimensions (L×W×H)
80 mm ×36 mm×12.8mm
Weight
38.7g
Data Rate
Max. down-link transmission rate: 2.4Mbps,
Max. up-link transmission rate: 153Kbps
Current
5V˄using USB interface supply˅
Current Consumption
Sleep: 5mA
Transmitting Power
224mW
Max.: 480mA
3. Precautions
¾
Please don’t use the product near flammable or explosive materials because it might cause
failure or fire.
¾
Keep the product away from high temperature, humidity, or dust because it might cause
failure.
¾
Avoid shock, cast or impact. Please keep the product well when you don’t use it.
¾
Do not dismantle or disassemble the product at will or revolve the antenna frequently. Our
company will not provide warranty service for the damage caused by abnormal operations.
¾
Don’t use the product near the place where is weak signal or high-precision electronic device
because the magnetic interference might cause the misoperation of electronic device or other
problems.
Please don’t insert or pull out the card with great force to avoid damaging the interface.
¾
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
4. Appearance
4.1 Introduction
Top View
Rear View
Tap
USB Interface
R-UIM Card Cover
Antenna
Host
LED
LED status descriptions:
LED
Insert the data terminal
Network Registered
There is service or
searching the network
EV-DO
1X
EV-DO
1X
Yellow
ON
OFF
Slow Flash
OFF
Quick Flash
Green
ON
Slow Flash
OFF
Quick Flash
OFF
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
4.2 Insert R-UIM Card
Note: If your data terminal doesn’t need R-UIM card, please skip this section.
1. Pull out the tap
2. Take out the R-UIM card cover in the
direction indicated by the arrow
3. Insert R-UIM card as below figure
4. Push back R-UIM card cover in the direction indicated by the arrow
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
5. Install and Uninstall
System Requirements:
The Data Terminal supports the following operating system:
¾
Windows 2000
¾
Windows XP
PC minimum configurations:
CPU
Pentium-II/233MHz
USB interface
2.0 (USB1.0 and 1.1 compatible
Optical Drive
CD-ROM (for installation only)
Memory
64 MB
Disk Space
30 MB (used for installation of application)
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
5.1Windows 2000
5.1.1 Install
Note:
Do not insert the Data Terminal before installation.
1ǃFind “Setup.exe” firstly in Data Terminal CD-ROM, double-click it to display the Welcome
picture, and then click “Next”;
2ǃSelect the location where you want the program to be installed, and then click “Next”;
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
3ǃSelect Start Menu folder, and then click “Next”;
4ǃWhen you see the window below, please click “Install”;
5ǃPlease wait for installation.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
6ǃPlease insert the Data Terminal into USB interface if the system prompts you to insert the
hardware (If it has been inserted, please unplug it and insert again.)
7ǃThe system shall find the new hardware and install the driver automatically. Just wait a minute;
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
8ǃThe driver is installed successfully. Pleas click “OK”;
9ǃClick “Finish” to close the last screen of the wizard. Now you can start the application for Data
Terminal.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
5.1.2 Uninstall
1ǃSelect Start -> Programs -> ZTE EV-DO -> Uninstall ZTE EV-DO. Click “Uninstall ZTE
EV-DO”, and you will be asked if you want to remove the program. Click “Yes”;
2ǃPlease wait;
3ǃClick “OK” when un-installation is completed;
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
5.2Windows XP
5.2.1 Install
Note:
Do not insert the Data Terminal before installation.
1ǃFind “Setup.exe” firstly in the Data Terminal CD-ROM, double-click it to display the Welcome
picture, and then click “Next”;
2ǃSelect the location where you want the program to be installed, and then click “Next”;
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
3ǃSelect Start Menu folder, and then click “Next”;
4ǃWhen you see the window below, please click “Install”;
5ǃPlease wait for installation. This process will take a few minute;
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
6ǃPlease insert the Data Terminal into USB interface if the system prompts you to insert the
hardware (If it has been inserted, please unplug it and insert again.)
7ǃThe system shall find the new hardware and install the driver automatically. Just wait a
minute.(Please ignore the prompt during the installation, such as “USB device not recognized” or
“Your hardware might not be able to work normally because there is an error during the hardware
installation.”)
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
8ǃThe driver is installed successfully. Pleas click “OK”;
9ǃClick “Finish” to close the last screen of the wizard. Now you can start the application for data
terminal
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
5.2.2 Uninstall
1ǃSelect Start -> Programs -> ZTE EV-DO -> Uninstall ZTE EV-DO. Click “Uninstall ZTE
EV-DO”, and you will be asked if you want to remove the program. Click “Yes”;
2ǃPlease wait;
3ǃClick “OK” when un-installation is completed.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
6. Run the Application
After the application is installed successfully, the application icon
will appear on your
desktop. Double-click this icon or select from Start -> Programs -> ZTE EV-DO -> ZTE EV-DO.
Run the application to display the following user interface.
The icons on the interface are used to access the function, which indicate as below:
Connect/Disconnect
Open URL
Connection Records
Setting
Help
Status Bar:
EV-DO Indication
1X Indication
Signal strength indication. The more bars,
the stronger signals
CDMA network unavailable
Network Connection
Sleep mode
In Roaming
No R-UIM card inserted
R-UIM card inserted
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
7. Connect/Disconnect
Connect
—
Click
icon to set the relevant parameters. For details, please refer to Chapter 9
“Setting” for details;
—
—
icon at the left-up corner of the interface;
Click
After connecting to Internet, the current network information will appear on the
interface. Double-click any place in the display area to view the connection records.
Disconnect
After connecting to Internet, click the rotating icon
ZTE Corporation
at the left-up corner of the interface.
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
8. Connection Records
Click
icon to view connection records. Connection records save the previous relevant
information including Start at, Duration and Transmit bytes, which help you know the status
easily.
By switching among “List”, “Monthly” and “Statistic”, you could inquire the records every time,
by month or by time.
Note:
The relevant information contained in connection records are just for user’s reference rather than
the charging basis.
Delete Connection Records
Click “Delete” button to delete the records you have selected on the interface.
Clear Connection Records
Click “Clear” button to delete all the records.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
9. Setting
Network Connection Setting
—
Click
icon to set up the relevant parameters. After the setting, click “Apply”
button to save the settings on the current interface.
—
Click “Default” button and then “Apply” button to restore the settings on the current
interface to factory default.
Note:
The default network setup parameters are as below. Different regions may have different
network setup parameters, so please consult your local telecom operator.
Phone: #777
User: card
Password: card
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Other Setting:
—
Click “Options” to switch the interface, and you could set URL and select the skin,
language, etc. After that, click “Apply” button to save the settings on the current
interface .
—
Click “Default” button and then “Apply” button to restore the settings on the current
interface to factory default.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
10. Help
Click
button to view the help file.
—
Click “Help” button to view the relevant help file; click “Online service” to enter our
company’s website.
—
You could view the software and its version information under “About”.
11. Connect to the Website
Click
button to directly connect the website you set. For details on the website setting,
please refer to Chapter 9 “Setting”.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
12. Trouble-shooting
After the installation, go to device manager and find “ZTE Status Interface 3197” under “Modem”
and “ZTE USB Modem 3197” under “Port”. If they are not found, please remove the software and
reinstall.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Common Failures Table:
Failures
Error
occurs
when
Causes
running
setup.exe file.
Open port failed.
Solutions
Please download the program on
The setup file may be damaged.
our website WWW.ZTEIT.COM
and reinstall it.
Directly run the software before the
Close the software, plug in the Data
Data Terminal is plugged in.
Terminal and run it again.
The
port
is
occupied
by
other
applications, such as “Hyper terminal”,
Close relevant software and run the
software again.
or the software is already run.
No R-UIM card.
R-UIM card is not inserted.
Insert R-UIM card.
R-UIM card isnÿt inserted properly.
Please refer to section 4.2. Properly
Sometimes the front side and back side
insert R-UIM card.
are confused.
R-UIM card is damaged. Validate by
Replace R-UIM card.
using a CDMA terminal.
No signal indicated.
Antenna is not connected to the Access
Insert the antenna into the Data
Box.
Terminal.
Out of the network service area.
Make sure it is in the CDMA
network service area.
The antenna or RF component is
Replace relevant damaged parts.
damaged.
Dialing failed
Wrong setting of parameters (Phone,
Correct
User, Password)
Consult your service provider for
the
parameter
settings.
details.
Not enough money in R-UIM card.
Consult your service provider for
details.
Internet connection failure.
Network congestion or failure.
Try again later.
The Data Terminal is being connected.
Reconnect.
(It usually occurs when the Internet
connection is immediately made after
the call is dialed)
Poor network signal.
View signal strength indication and
check if the antenna is properly
inserted.
ZTE Corporation
http//wwwztecomcn
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
If the problems cannot be solved after the above handling, please call 86-755-2601555 or feed
back your information directly by sending emails to zte_mobile@zte.com.cn for customer service.
We will reply to you as soon as possible and provide you with high quality after-sales services.
*SAR Information
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types AC8700
(FCC ID: Q78-AC8700) has also been tested against this SAR limit. The highest SAR value reported
under this standard during product certification for use when properly worn on the body is 0.271 W/kg.
ZTE Corporation
http//wwwztecomcn

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2006:11:24 20:05:26+08:00
Modify Date                     : 2006:11:24 20:05:26+08:00
Metadata Date                   : 2006:11:24 20:05:11+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:31BCDC08B47BDB1180D3DC320644BD6E
Instance ID                     : uuid:4e0b40e5-43d3-4fe7-b233-69608b40aff7
Derived From Instance ID        : uuid:37681576-619b-40fd-8f6b-9a89e48c7367
Derived From Document ID        : uuid:C1A6DDE1A678DB11B531999C60E5EA67
Format                          : application/postscript
Title                           : untitled
Creator                         : Bfit_W
Page Count                      : 26
Author                          : Bfit_W

EXIF Metadata provided by EXIF.tools