ZTE AC8710 CDMA20001x/EVDO Wireless Data Terminal User Manual AC8710 user guide V1 0 071128
ZTE Corporation CDMA20001x/EVDO Wireless Data Terminal AC8710 user guide V1 0 071128
ZTE >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 931119 |
| Application ID | ZmV12DDjh2QTQvAjEPuBNA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 117.29kB (1466095 bits) |
| Date Submitted | 2008-04-21 00:00:00 |
| Date Available | 2008-04-21 00:00:00 |
| Creation Date | 2008-03-10 13:43:53 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2008-03-10 13:45:27 |
| Document Title | Microsoft Word - AC8710 user guide V1 0_071128.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | daniel |
CDMA2000 1X EV-DO Wireless Data Terminal User Guide CDMA2000 1X EV-DO Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC8710. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Copyright Statement Copyright © 2007 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. V1.0, Nov. 2007 ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Table of Contents 1. Introduction.............................................................................................................................1 2. Precautions..............................................................................................................................1 3. Appearance .............................................................................................................................2 3.1 Introduction.........................................................................................................................2 3.2 Insert R-UIM Card ..............................................................................................................2 3.3 Operation Guide of Data Cable...........................................................................................3 4. Install and Uninstall ................................................................................................................4 4.1 Windows 2000 ...................................................................................................................5 4.1.1 Install........................................................................................................................5 4.1.2 Uninstall ...................................................................................................................9 4.2 Windows XP ....................................................................................................................10 4.2.1 Install......................................................................................................................10 4.2.2 Uninstall .................................................................................................................15 4.3 Windows Vista .................................................................................................................16 4.3.1 Install......................................................................................................................16 4.3.2 Uninstall .................................................................................................................20 4.4 Manually Install Through Other USB Port .......................................................................21 4.4.1 Windows 2000........................................................................................................21 5. Run the Application ..............................................................................................................22 6. Connect/Disconnect ..............................................................................................................23 7. Connection Records..............................................................................................................24 8. Voice Call.................................................................................................................................25 9. Call History .............................................................................................................................28 10. Short Message........................................................................................................................29 11. Phone Book............................................................................................................................31 12. Setting....................................................................................................................................33 13. Help .......................................................................................................................................36 14. Connect to the Website ..........................................................................................................36 15. Trouble-shooting....................................................................................................................37 ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 1. Introduction Thank you for choosing AC8710 CDMA2000 1X EV-DO Wireless Data Terminal (hereinafter referred to as Data Terminal) of ZTE Corporation. The Data Terminal equips with a standard USB interface and supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send&receive short messages, and make & receive phone calls. 2. Precautions ¾ Please don’t use the product near flammable or explosive materials because it might cause failure or fire. ¾ Keep the product away from high temperature, humidity, or dust because it might cause failure. ¾ Avoid shock, cast or impact. Please keep the product well when you don’t use it. ¾ Do not unplug the antenna. Damage cause by misuse is not covered by this warranty. ¾ Don’t use the product near the place where is weak signal or high-precision electronic device because the magnetic interference might cause the misoperation of electronic device or other problems. ¾ Please make sure to quit the application before pulling out the terminal, otherwise it would damage the terminal or affect the normal operation of the system. Please don’t insert or pull out the card with great force to avoid damaging the interface. ¾ ¾ This device has been tested for FCC RF exposure body SAR compliance with typical laptop computers. In order to comply with FCC RF exposure requirements, AC8710 CDMA data terminal user is recommended to have good knowledge on RF exposure. During operation, a 1.5cm separation distance should be maintained between the antenna, whether extended or retracted, and the user’s/bystander’s body (excluding hands, wrists, feet, and ankles) to ensure FCC RF exposure compliance. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Appearance 3.1 Introduction Top View Rear View Tap USB Interface R-UIM Card Cover Antenna Host LED LED status descriptions: LED EV-DO 1X EV-DO 1X EV-DO 1X Yellow ON OFF Slow Flash OFF Quick Flash OFF Flash Green ON Slow Flash OFF OFF Flash OFF Network Registered Service available or Searching for the network Upon an incoming call(as the terminal supports voice call) Inserting the data terminal Quick Flash 3.2 Insert R-UIM Card Note: If your data terminal doesn’t need R-UIM card, please skip this section. 1. Pull out the tap； 2. Take out the R-UIM card cover in the direction indicated by the arrow； ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Insert R-UIM card as below figure； 4. Push back R-UIM card cover in the direction indicated by the arrow. 3.3 Operation Guide of Data Cable Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface ① with Data Terminal, and interface ② with PC's USB port. If the power supply from USB port is insufficient, connect both interface ② and ③ with USB port together. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4. Install and Uninstall System Requirements: The Data Terminal supports the following operating system: ¾ Windows 2000 ¾ Windows XP ¾ Windows Vista PC minimum configurations: CPU Pentium-II/233MHz USB interface 2.0 (USB1.0 and 1.1 compatible) Optical Drive CD-ROM (for installation only) Memory 64 MB Disk Space 50 MB (used for installation of application) ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.1 Windows 2000 4.1.1 Install Note: Do not insert the Data Terminal before installation. 1、Find “Setup.exe” firstly in Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click “Next”; 2、Select the location where you want the program to be installed, and then click “Next”; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3、Select Start Menu folder, and then click “Next”; 4、When you see the window below, please click “Install”; 5、Please wait for installation. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 6、Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware (If it has been inserted, please unplug it and insert again.) 7、The system shall find the new hardware and install the driver automatically. Just wait a minute; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 8、The driver is installed successfully. Pleas click “OK”; 9、Click “Finish” to close the last screen of the wizard. Now you can start the application for Data Terminal. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.1.2 Uninstall 1、Select Start -> Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click “Uninstall ZTE Wireless Terminal”, and you will be asked if you want to remove the program. Click “Yes”; 2、Please wait; 3、Click “OK” when un-installation is completed; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.2 Windows XP 4.2.1 Install Note: Do not insert the Data Terminal before installation. 1. Find “setup.exe” firstly in the Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click “Next”; 2. Select the location where you want the program to be installed, and then click “Next”; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3. Select Start Menu folder, and then click “Next”; 4. When you see the window below, please click “Install”; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 5. Please wait for installation; 6. Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware; (If it has been inserted, please unplug it and insert again.) ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 7. The system shall find the new hardware and install the driver automatically. Just wait a minute; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 8. The driver is installed successfully. Pleas click “OK”; 9. Click “Finish” to close the last screen of the wizard. Now you can start the application for data terminal. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.2.2 Uninstall 1. Select Start Programs ZTE Wireless Terminal Uninstall ZTE Wireless Terminal. Click “Uninstall ZTE Wireless Terminal”, and you will be asked if you want to remove the program. Click “Yes”. 2. Please wait. 3. Click “OK” when un-installation is completed. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.3 Windows Vista 4.3.1 Install Note: Do not insert the Data Terminal before installation. 1、Find “Setup.exe” firstly in the Data Terminal CD-ROM, double-click it to display the Welcome picture, and then click “Next”; 2、Select the location where you want the program to be installed, and then click “Next”; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 3、Select Start Menu folder, and then click “Next”; 4、When you see the window below, please click “Install”; 5、Please wait for installation; ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 6、Please insert the Data Terminal into USB interface if the system prompts you to insert the hardware (If it has been inserted, please unplug it and insert again.) 7、The system shall find the new hardware and install the driver automatically. Just wait a minute. (Please ignore the prompt during the installation, such as “USB device not recognized” or “Your hardware might not be able to work normally because there is an error during the hardware installation.”) ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 8、The driver is installed successfully. Pleas click “OK”; 9、Click “Finish” to close the last screen of the wizard. Now you can start the application for data terminal. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.3.2 Uninstall 1、Select Start -> All Programs -> ZTE Wireless Terminal -> Uninstall ZTE Wireless Terminal. Click “Uninstall ZTE Wireless Terminal”, and you will be asked if you want to remove the program. Click “Yes”; 2、Please wait; 3、Click “OK” when un-installation is completed. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 4.4 Manually Install Through Other USB Port If the data terminal doesn't work through other USB ports after the driver is installed successfully through a USB port, you could manually install the driver in the following method. Please make sure to quit other applications during the installation. 4.4.1 Windows 2000 Insert the data terminal to another port, and the system will find new hardware and automatically install the driver. When the following prompt appears, click “Yes”. Now you can start the application for data terminal. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 5. Run the Application After the application is installed successfully, the application icon will appear on your desktop. Double-click this icon or select from Start -> Programs ->ZTE Wireless Terminal -> ZTE Wireless Terminal. Run the application to display the following user interface. Press to display other icons. The icons on the interface are used to access the function, which indicate as below: Connect / Disconnect Open URL Voice Call Call History Short message Phone book Connection Records Setting Help ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Status Bar: EV-DO indication Call indication 1X indication Missed call indication 1X/DO indication Unread message indication Signal strength indication. The more bars there are, the stronger signals are. Inbox full indication CDMA network unavailable No R-UIM card inserted indication Connection indication R-UIM card inserted indication Sleep indication Roaming indication Note: Some features like Voice Call, Call History, Short Message, and Phone Book may not be supported by your Data Terminal; the corresponding icons will not appear in the main window. 6. Connect/Disconnect Connect Click icon to set the relevant parameters. For details, please refer to Chapter 12 ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide “Setting” for details. Click After connecting to Internet, the current network information will appear on the interface. Double-click any place in the display area to view the connection drawing. icon at the left-up corner of the interface. Disconnect After connecting to Internet, click the rotating icon at the left-up corner of the interface. 7. Connection Records icon to view connection records. Connection records save the previous relevant Click information including Start at, Duration and Transmit bytes, which will help you know the status easily. By switching among “List”, “Monthly” and “Statistic”, you could inquire the records every time, by month or by time. Note: The relevant information contained in connection records are just for user’s reference rather than the charging basis. Delete Connection Records Click button to delete the records you have selected on the interface. Clear Connection Records ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Click button to delete all the records. Note: If your data terminal doesn’t support Voice Call, Call History, Short Message, and Phone Book features, please skip 8-11 sections. 8. Voice Call Click to enter voice call interface. Make a call Click the digits in the right side of the interface, or input the digits directly from keyboard. Press button or press “Backspace” to delete the previous input digit; press button or press “Esc” to clear all the inputs. Click button in the right side of the interface or press “Enter” to make a call. Receive a call When there is an incoming call, your computer will alert and the incoming caller ID will appear on the interface. Click button in the right side of the interface or press “Enter” to receive the call. Press button or press “Esc” to reject the call. Redial the latest outgoing call Click ZTE Corporation button in the right side of the interface. http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Call Waiting During a call, you could select to answer the second incoming call, and then you could switch between the two incoming calls. Please firstly apply for this service from your local telecom operator. During a call, if there is a new incoming call, a pop-up window will prompt you that you have the second incoming call. If you select to answer, please click “Accept waiting call” button. The previous call won’t be ended, but temporarily paused. You could switch between two incoming calls by clicking “Switch call”. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Three-way Call This function allows for the call among three parties. Please firstly apply for this service from your local telecom operator. Note: You need set “Show 3 way call button during calling”. Please perform the setting according to chapter 12. You could click “Dial second call” button during a call, input the third-party number in the pop-up window, and then press “OK” button to call the third party. In this case, the original call won’t be ended, but temporarily paused. If the third party answers the call, click “Start conference” to enter the conference call. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide During three-way conference call, click “Hangup second call” button to end the conference call, and return to the original call. 9. Call History Click icon to view the call history. The outgoing/incoming calls are saved in call history, including missed calls; incoming calls, outgoing calls, and talk duration. You could select the type you want to view. Missed/Accepted/Called Calls Click button to delete your selected record. Click button to delete all records in Missed/Incoming/Outgoing catalog. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Click button to dial the number. Click button to send a short message to this number. Click button to save this number to the phone book. Click button to clear the talk duration. Statistic 10. Short Message Click icon to enter Short message interface. Send a Message Input the text to send，or click Input the recipient’s number or click button to select the preset message to send. button to select the recipient from phone book. Add more recipients if you like. Select priority. Click ZTE Corporation button to send a message. http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Click button to save the text into outbox. The received messages will be saved in the Data Terminal In-box. After the Data Terminal In-box is full, the system will automatically move the messages in the Data Terminal In-box to the PC In-box, and clean out the Data Terminal In-box. You could copy the messages from the Data Terminal In-box to PC In-box by selecting Copy or Copy All; you could also copy the messages from PC In-box to the Data Terminal In-box by selecting Copy. The sent messages and unsent but saved messages will be all saved in the Out-box. Take Data Terminal In-box as an example: Reply Click to reply to the sender. Forward Click to forward this message to other recipients. Dial Sender’s Number Click to dial the sender’s phone number. Save Sender’s Number Click ZTE Corporation to save the sender’s number into phone book. http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Delete Click to delete your selected records. Click to delete all the records in the inbox. Click to copy your selected record into PC. Clear Copy Copy All Click to copy all the records from the data terminal to PC. 11. Phone Book to view the Phone book. You could select to save the contacts either in the data Click terminal、R-UIM Card or in the computer. Click the pull-down menu to select the storage location. You could copy the contacts from the data terminal to your computer or from the computer to the data terminal by clicking or Add ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Click then input the contents and select “OK” to add a new contact. Click then modify the contents and select “OK” to modify the contact Modify information. Dial from the phone book Click to dial your selected phone number. Send messages from the phone book Click to compose the text. You could send the message to multiple recipients. Search for contacts Click to search for the contacts by name or number. Delete Click to delete your selected contact. Delete All Click to delete all the contacts. Click to copy your selected contacts to other storage location. Copy Copy All Click ZTE Corporation to copy all contacts to other storage location. http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 12. Setting Click to enter the setting interface. Network Connection Setting Set up the relevant parameters, work mode on the “Network” interface. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Note: The default network setup parameters are as below. Different regions may have different network setup parameters, so please consult your local telecom operator. Phone: #777 User: card Password: card ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Other Setting: Click “Options” to switch the interface, and you could set URL and select the skin, language, etc. If you want to use conference call, please select “Show 3 way call button during calling”; After the setting, click “Apply” button to save the settings on the current interface. Click “Change Password” button to set lock device. The password is required when you start the application. The setting has nothing to do with "Default" button. If your data terminal needs R-UIM card, please click the button “Enable Pin”. PIN code is needed when the application is started. The setting has nothing to do with "Default" button. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Select ring tone After clicking “Ring”, you could set different ring tones for Call coming, New message, Call connected, Call disconnected and Waiting call. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. Supplementary Services After clicking “Service”, you could set “Unconditional forwarding”, “Busy Forwarding”, “No answer forwarding”, “Call waiting”, etc. Double-click the selected option to modify the service number and forwarding number. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide After the setting, click button to send the corresponding request to the network system. After the setting, click “Apply” button to save the settings on the current interface. Click “Default” button and then “Apply” button to restore the settings on the current interface to factory default. 13. Help Click button to view the help file. Click “Help” button to view the relevant help file; click “Online service” to enter our company’s website. You could view the software version information under “About”. 14. Connect to the Website Click button to directly connect the website you set. For details on the website setting, please refer to Chapter 12 “Setting”. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide 15. Trouble-shooting After the installation, go to device manager and find “ZTE USB Modem FFFF” under “Modem” and “ZTE Service Port FFFF”, “ZTE Voice Port FFFF” under “Port”. If they are not found, please remove the software and reinstall. ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Common Failures Table: Failures Causes Error occurs when running setup.exe file. The setup file may be damaged. Directly run the software before the Data Terminal is plugged in. Open port failed. No R-UIM card. No signal indicated. The port is occupied by other applications, such as “Hyper terminal”, or the software is already run. R-UIM card is not inserted. R-UIM card is damaged. Validate by using a CDMA terminal. Replace R-UIM card. Antenna is not connected to the Access Box. Insert the antenna into the Data Terminal. Out of the network service area. Make sure it is in the CDMA network service area. Dialing failed Not enough money in R-UIM card. ZTE Corporation Insert R-UIM card. Please refer to section 3.2. Properly insert R-UIM card. Wrong setting of parameters (Phone, User, Password) The driver might be unable to work and the application is unable to run normally if the terminal is pulled out and plugged in again when the application is being used under Win2000 operating system (SP4).In this case, the device in device manager will be marked with yellow exclamation mark, and the system must be restarted to run normally. Close relevant software and run the software again. R-UIM card isn’t inserted properly. Sometimes the front side and back side are confused. The antenna or RF component is damaged. Internet connection failure. Solutions Please download the program on our website WWW.ZTEMT.COM and reinstall it. Close the software, plug in the Data Terminal and run it again. Replace relevant damaged parts. Correct the parameter settings. Consult your service provider for details. Consult your service provider for details. Network congestion or failure. Try again later. The Data Terminal is being connected. (It usually occurs when the Internet connection is immediately made after the call is dialed) Reconnect. Poor network signal. View signal strength indication and check if the antenna is properly inserted. Please download the patch from the following web site and install it. The operating system needs installing Update Roll 1 patch for Win2K SP4. http://www.microsoft.com/do wnloads/details.aspx?familyi d=B54730CF-8850-4531-B5 2B-BF28B324C662&display lang=en http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. Any change to the equipment will void FCC grant. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. The equipment compliance with FCC radiation exposure limit set forth for uncontrolled Environment ZTE Corporation http://www.zte.com.cn
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 42 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:8fc5c947-a862-40a1-b064-d94d0235b63d Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2008:03:10 13:43:53-07:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:03:10 13:45:27-07:00 Metadata Date : 2008:03:10 13:45:27-07:00 Document ID : uuid:8aaefa6f-18c9-454b-85d9-ad4abd7d0e3a Format : application/pdf Creator : daniel Title : Microsoft Word - AC8710 user guide V1 0_071128.doc Author : danielEXIF Metadata provided by EXIF.tools