ZTE B01 Light BTH User Manual User guide Light BTH Updated 05 18 ai

ZTE Corporation Light BTH User guide Light BTH Updated 05 18 ai

User manaul

Download: ZTE B01 Light BTH User Manual User guide Light BTH Updated 05 18 ai
Mirror Download [FCC.gov]ZTE B01 Light BTH User Manual User guide Light BTH Updated 05 18 ai
Document ID1473803
Application ID/Xf9fuVv9maDVK4eHgGzTg==
Document DescriptionUser manaul
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.77kB (184567 bits)
Date Submitted2011-05-27 00:00:00
Date Available2011-10-25 00:00:00
Creation Date2011-05-26 14:47:14
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2011-05-26 14:47:14
Document TitleUser guide_Light BTH_Updated_05.18.ai
Document CreatorPScript5.dll Version 5.2
Document Author: pro-user

Overview
MFB
Speaker
LED
ZTE Bluetooth headset
User Guide
Microphone
Front
How to use
First time use: Charge the headset for
approximately 2 hours,or until the LED
light is off.
Power on / off:
Press and hold the MFB for longer than
5 seconds to switch.
Step 1.Connect the miniconnector of
chargingcable to
the charging
connector
on the headset.
Step 2.Connect the
USBconnector of
charging cable to
the powered USB
port on the
desktop orlaptop.
Ear cushion
Light BTH
Charging
Back
Step 3.LED will fash
twice when connected
and lights on during charging. After
charging complete, LED will turn off.
Note: Headset is not functional
while charging.
Pairing:
Before you can use your headset,you
must pair it with your phone.
Step 1.Press and hold the MFB for
longer than 5 seconds to power on the
headset and put Headset in paring mode.
Step 2.Turn on the Bluetooth function on
the mobile phone and set the phone to
search for Bluetooth devices.
Step 3.Select the headset (Light BTH).
* decide by customer of device name.
Step 4.Enter the passcode 0000 to pair
and connect the headset to your phone.
LED Flashing
Button Function
Answering / Ending a call:
Short press the MFB
Button
Rejecting an incoming call:
Press and hold MFB for longer than 2
seconds.
Redialing last number:
Press and hold MFB for longer than 3
seconds.
Talk time 8 Hours
Standby time 120 Hours
Typical -1~4 dBm for Class 2
Out power: -0.5~4 dBm
If BT Headset dosen’t connector A.G.,
it will auto-shut down after 300 sec.
MFB
Headset
Status
Event
FCC Statement
Flashing Pattern
COMMENT
Action
Function
Ringing
Short Press
Answer an incoming call
Talking
Power on
Talking
Short Press
Voice Recognition
Power off
Power off
Press and hold for longer
than 5 seconds
Power on headset and put
Headset into pairing mode
Pairing
ON(300ms)
OFF(300ms)
N/A
Power on
Press and hold for longer
than 5 seconds
Power off the Headset
Standby – No
Connected
ON(100ms)
OFF(4900ms)
N/A
Short Press
The phone will enter voice
dial mode (handset must
have this function)
Standby ACL
connected
ON(100ms)
OFF(2900ms)
N/A
SCO
Connected
ON(100ms)
OFF(1900ms)
N/A
Charging
ON
N/A
Charging
Complete
OFF
N/A
Voice dial
Without permission,any company,firm or user shall not alter the frequency,increase the power,
or change the characteristics and functions of the original design of the certified lower power
frequency electric machinery.
The application of low power frequency electric machineries shall not affect the navigation safety
nor inter a legal communication, if an Interference is found, the service will be suspended until
improvement is made and the interference no loger exists.
Flash 3 times
ON (250ms)
OFF (250ms
Flash 3 times
ON (250ms)
OFF (250ms)
Only applied when user power
on thesystem.
Only applied when user
shutdown the
system.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
. Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority
to operate this equipment.
. This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
概观
喇叭
LED
中兴蓝牙耳机
麦克风
前视图
第一次使用：请将耳机充电约2小时，或
直到LED灯熄灭。
电源开/关：
开:按住MFB按键的时间超过5秒钟
关:按住MFB按键的时间超过5秒钟
步骤2.将充电线
的USB端子接
到桌机或笔
记型计算机
的USB埠。
步骤3. 连结充电
时、LED会闪烁两
次。充电时LED会
保持亮着。当充电
完成后，LED
将熄灭。
耳塞
用户手册
如何使用
步骤1.将充电线连接至耳机的充电界面。
MFB按键
Light BTH
充电
后视图
附注：耳机在充电
时将无法运作。
配对：
在使用耳机之前，您必须将耳机跟您的
手机进行配对。
步骤1.按住MFB按键五秒，让耳机开启
并进入配对模式。
步骤2.打开移动电话的蓝牙功能
并设置手机搜索蓝牙设备。
按键功能
接听/结束通话：
短按MFB
按钮
LED 显示状态
耳机状态
动作
功能
响铃
按一下
回答来电
回放最后号码：
按住MFB的时间超过3秒
通话
按一下
挂断电话
通话时控制麦克风开/关：
按住MFB的时间超过2秒
关机
按住超过 5 秒
开机并让耳机进入配对模式
开机
按住超过 5 秒
关机
语音播号
按一下
手机进入语音播号模式(手机必需有
此功能)
拒绝接听来电：
按住MFB的时间超过2秒
步骤3.选择耳机（Light BTH）。
通话时间 8 Hours
待机时间 120 Hours
蓝牙范围 信息 Class 2
步骤4.输入密码0000配对并连接耳机到您
的手机。
如果蓝牙耳机沒有和A.G.连线,
300秒后自动关机。
MFB
事件
低功率射频电机之使用不得影响飞航安全及干扰合法通信；经发现有干扰现象时，应立即
停用，并改善至无干扰时方得继续使用。前项合法通信，指依电信法规定作业之无线电通信。
低功率射频电机须忍受合法通信或工业、科学及医疗用电波辐射性电机设备之干扰。
备注
闪烁3 次
亮着 (300ms)
不亮 (300ms)
闪烁3 次
亮着 (300ms)
不亮 (300ms)
亮着 (200ms)
不亮 (200ms)
亮着 (500ms)
不亮 (2500ms)
亮着 (1500ms)
不亮 (6000ms)
亮着 (2000ms)
不亮 (6500ms)
N/A
充电中
亮着
N/A
充电完成
不亮
N/A
电源开启
电源关闭
配对
经型式认证合格之率射频电机,非经许可,公司、商号或使用者均不得擅自变更频率、加大功
率或变原计之特性及功能。
闪烁方式
待机--未连结
待机--ACL 连结
SCO 连结
只有当系统开启时候.
只有当系统关闭时候.
N/A
N/A
N/A
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:05:26 14:47:14+08:00
Create Date                     : 2011:05:26 14:47:14+08:00
Format                          : application/pdf
Title                           : User guide_Light BTH_Updated_05.18.ai
Creator                         : pro-user
Document ID                     : uuid:a93b1336-26fe-4d65-84e3-02d035d18bf3
Instance ID                     : uuid:6fa2292a-155a-4402-b42b-b3632ca0c88a
Page Count                      : 2
Author                          : pro-user
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Q78-B01

Navigation menu