ZTE BS8922L1700 LTE Remote Radio Unit User Manual part 1

Download:
Mirror Download [FCC.gov]
Document ID	3752571
Application ID	wiX+PImHIvhR6XQwzIobhg==
Document Description	User manual part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	391.23kB (4890334 bits)
Date Submitted	2018-02-13 00:00:00
Date Available	2018-02-14 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	PDF-XChange (PDFTools3.exe v3.60.0106) (Windows)
Document Lastmod	0000-00-00 00:00:00
Document Title	User manual part 1
Document Creator	Tracker's PDF-Tools

Version: Hv2.l
Serial Number: SJ—20140915104442—003
Publishing Dale: 2015—7—17 (RH)
FDD—LTE Integrated eNodeB
Engineering Installation Guide
(ZXSDR 888922)
Address No. Sim-lam Road suulh,shenzhen, P kchinu Pns'cude 5I5057
Vel: 086-755-26770801 URL hllp'//www.1|evcom (n E-mcll: 800°1le (om (n
ZTE CORPORATION
ZTE CORPORATION
ZTE
Content _
Safety Information ——————————————————————————— 3
Safety Symbols —————————————————————————————— 3
Installation Precautions —————————————————————— 4
Space Requirement —————————————————————————— 4
Hoisting ————————————————————————————————————— 5
Installation Flow ————————————————————————————— 6
Installation Preparation ——————————————————————— 6
Installation Accessories —————————————————————— 8
Unpacking and Inspection -------------------- 8
Media Requirement ————————————————————————— 9
RRU Installation Modes —————————————————————— 9
Installing the ZXSDR 888922 on a Pole ———————— 9
Installing the ZXSDR 888922 on the Wall ——————— 12
GPS Antenna Installation (Optional) ———————————— 16
Cable List —————————————————————————————————— 17
Cable Installation ———————————————————————————— 19
Installing the Grounding Cable ———————————————— 19
Installing the Power Cable ———————————————————— 21
Installing the Optical Fiber ———————————————————— 24
Installing Antenna Feeder Cables -------------- 25
Installing the Monitoring Cable ---------------- 26
Installing the GPS Cable ---------------------- 27
Installing the Ethernet Cable ------------------ 28
Waterproof Handling ------------------------- 30
Concentrator Installation (Optional) ------------ 32
Installing the Waterproof Cover ---------------- 33
Installation Check --------------------------- 35
Equipment Power—On ----------------------- 36
Closure ------------------------------------ 37
ZXSDR 588922 FDD—L TE Integrated eNodeB Engineering Installation Guide -
uowoo'eu'MMM/lrduu iosougzsswm lei. eumo'u'd ‘uelizuaus W108 P908 wast-IH '99 'ON isseippvl
ZTE
The following describes personal health and safety information when you work with ZTE
system products. To prevent accidents, read the safety information provided in this
document carefully before using ZTE system products.
I Local regulations supersede the information provided in this manual. Where applicable local
regulations are unavailable, the information herein prevails.
IAII personnel must be equipped with the knowledge of safety operations, technical training,
and corresponding qualifications certified by ZTE CORPORATION. For some operations, they
may need special trainings or qualifications certified by ZTECORPORATION.
Safety Symbols
A Electrical Hazard: There is a risk of electric shock.
A Laser Hazard: Beware of strong laser beams. Do not look directly at the
laser beam.
A Heat Hazard: Beware of heat sources or hot surfaces that can cause burns.
l Personal Protection
> Remove items of jewelry, such as rings, necklaces, and watches. These items may get entangled
with moving parts. Metal jewelry items are conductors that can result in electric shock.
> Always wear appropriate personal protective equipment when working.
> Jay attention to the hazard labels and caution or warning information on products. Never cover
or remove the hazard labels and caution or warning information.
> Only use the tools described in the instructions.
I Installation Security
> All personnel working at height must be specially-trained and certificated. Working at height
must comply with local laws, regulations, and guidelines.
> The device is heavy. Lifting the device without using a lifting device can result in serious
personal injury.
> Do not work at height or iron tower in bad weather such as rain or frog.
> Falling objects can result in serious or even fatal injuries. Always wear a safety helmet. Never
stand or walk under any heavy object that is being lifted.
> Incorrect electrical installation can result in fire, electric shock, or explosion that is likely to be
fatal. Only qualified electricians are allowed to install or modify electrical installations.
> It is recommended that fibers be installed in a temperature higher than —20“C.
> Switch off transmitting antennas, or reduce their output power to a safe level when working with,
or staying near, these antennas.
ZXSDR 388922 FDD-L TE Integrated eNodeB Engineering Installation Guide -
Installation Precautio s
1 Never open the hermetic seal before
or after the installation.
2The RRU body is applied with
antirust coating. Make sure that
the coating is not damaged during
transportation and installation.
4 Do not install the device
horizontally.
3Do not install the device with
interfaces facing upwards.
l.‘ ,
Space Requirement
Device Dimensions Recommended Minimum
(Unifi mm) Installation Space Installation Space
(Unit: mm) (Unit: mm)
— “ zaoo I 2200 I
2300
/ v" 5600
if. 750“ ' \
"T'T'“ “P1; ' 25:0] 7772, 'as?” TV,
120
$2 Note: For mounting multiple RRUs on a pole or centralized mounting, the spacing
between RRUs depends on the mounting components.
UO'UJOO'GDZ MMM/liduu LOQOLLQZ-SQL-Qm net eujuo'a'd ‘uauzuaus ‘uinos pang uoaHH ‘99 “oN :ssa.|ppvl
ZTE
The information provided in this section is used for reference when it is necessary
to hoist the RRU.
Operation Tools
Safety helmet
Life belt
Fixed pulley
Hoisting rope
Hauling cable
Hoist the RRU
1Installer A on the tower
secures the fixed pulley
on the tower, and passes
the hoisting rope down
to the ground through
the fixed pulley.
Hoisting
rope
Handle
2Installer C on the ground I
bundles the RRU tightly
with a cross tie and passes "'
the rope through the i
handle.
H |' [J
cable I
3Installer B on the ground drags the hoisting rope downwards.
Meanwhile, installer C pulls A
the dragline outwards to
protect the device from
colliding with the tower
when the device reaches
the installation platform.
0 Fixed pulley
Hauling
cable
ZXSDR 388922 FDD-L TE Integrated eNodeB Engineering Installation Guide -
4 Lift the properly-packed engineering materials used for tower mounting
onto the tower in the manner mentioned above. Never lift the
engineering materials by binding them directly to the hoisting rope.
Installation Flow
Installation
Preparation
Unpacking
and inspection
passed?
NO Contact the local
ZTE office
Yes
< I
Pole-mounted Wall-mounted
installation installation
Install the GPS
antenna(optional)
Install cables
Install the
concentrator(optional)
Ii
Check the installation
Power-on
the equipment
Closure
Installation Preparation
Tools and Instruments
Illustrates the tools and instruments required for the installation:
UO'UJOO'GDZ MMM/liduu LOQOLLQZ-SQL-Qm :|at EUIHO'EI'd ‘uauzuaus ‘utnos peoa uoat-iH ‘99 “oN :sserpvl
- |
ZXSDR 388922 FDD-L TE Integrated eNodeB Engineering Installation Guide -
Installation Accessories
Illustrates the installation accessories.
Angle adjustment
Clamp (used in
Expansion bolt (used
GPS antenna
Name installation _ pole-mounted _in wall-mounted installation Z?:;;;igfl
claw hammer snap-off knife safety glove safety helmet tape measure level ruler °°mp°nem mStaHat'O" m“) “Sta"atm" m“) °°mp°”e"'(°p"°"a‘)
“9 it is!
@ X “fix 0 , I!
ll if Image .
u.’
rope pulley Safety harness marker pen percussion drill ‘éi’éiunue'? o . "—
@ @ N; ‘1 k
N npacking and In pection
. cross flathead o en-end ad ustable - l '
power strip screwdriver screwdriver firench erench pllers Countmg GOOds
The packing boxes for the ZXSDR 888922 include crates and cartons.
I Step
'|.Verify that the packing boxes are in good condition. If any is broken, contact the transportation
company immediately.
essxas
UO'UJOO'GDZ MMM/liduu LOQOLLQZ-SQL-Qm :|at euruo'a'd ‘uauzuaus ‘utnos papa uoat-rH ‘99 “oN :ssa.|ppvl
diagonal pliers slip joint pliers rglr‘étggg‘fitéorgm hgfigpflg hot-air blower ”$531?“ 2.Unpaok the packing boxes and verify that the goods are consistent with the packing list.
lChecklng Goods
\ Check the ZXSDR 888922 and verify that:
'|.There are no dents, bumps, peeling, scratches, foaming, paint stripping, or blots on the
\ case.
2.The case surface is in good condition, without problems such as lacquer flaking off and
hacksaw file pipe wrench scissors crE/tsrtgrcitneiaetclteor cable tie scoring.
cnmper 3.AI| captive screws are tightly secured without dislocation.
4.The accessories required for the installation are correct and complete.
6) ,,,,. Arrange the inspected goods in accordance with categories.
w lEquipment Handover
v v
'I.After the goods are inspected, the project supervisor and the customer representative must
waterproof instulating grounding _ approve and sign the Unpacking Acceptance Report.
tape tape network tester regissttgrnce multimeter VSWR tester 2.Each party keeps one copy of the Unpacking Acceptance Report. The project supervisor
should, within seven days, send the Unpacking Acceptance Report to the local ZTE office
for filing.
ZTE ZXSDR 588922 FDD-L TE Integrated eNodeB Engineering Installation Guide -
Angle Adjustment installation Component
0 Fixing clip
Media Requirement s'"9'e'RRU M°“"t"‘9 9 Installation bracket and
p40 mm~a120 mm fastening screws
9 Installation bracket
>4mm
0 Vertical fastening screws
RRU Installation Modes
Illustrates the ZXSDR 388922 installation modes. Steps
| t H t. . . . .
”SA/fog?“ Pole-mounted Installatlon Wall-mounted '"5ta"at'°" @ Clamps are used in pole-mounted installation mode. The pole diameter is
between 40 mm and 120 mm.
1 Use four M6x20 screws to install the installation bracket on the ZXSDR
388922.
Image
~, fl
Installing the ZXSDR 888922 on a Pole
Installation Tools
UO'WOD'GIZ MMM/iidutl lDQOLLQZ-SQL-gm» :|a_|_ euguo'g'd ‘ueuzuaus ‘Lfll’lOS peog uoaHH ‘99 “oN :sserpvl
Operation Tool Note: When installing the M6><20 screws, first fasten the screws about 70% of
. . the depth, then fasten the screws in accordance with the diagonal sequence.
Install the Installation bracket on the M6 internal hexagonal wrench
ZXSDR 838922. 2
Secure the vertical fastening screws. M6 internal hexagonal wrench Use clamps to install the fixing clip on the pole.
Secure the bracket fastening screws. M6 internal hexagonal wrench
[3]
ZTE ‘ \77 ZXSDR 588922 FDD-L TE Integrated eNodeB Engineering Installation Guide -
Q Q
l 5 Adjust the horizontal angle of the ZXSDR B88922.
~ t @ Note: The horizontal angle adjustment range for the ZXSDR 838922 must be
II. v between —30° and 30°.
~ @ 3 Adjust the horizontal angle of the ZXSDR 888922.
3 Mount the ZXSDR B88922, on which the installation bracket
is installed, on the fixing clip.
b Secure the two screws of the 6ZXSDR BS8922 Installed
installation bracket on the on a Pole.
fixing clip.
4 Adjust the vertical angle
of the ZXSDR B38922.
i? Note: The angle between
the ZXSDR 888922 and
the pole must be between
0° and 20°.
a Loosen the vertical
fastening screws until
the ZXSDR 838922 can
be adjusted vertically.
UO'wOO'alZ'MMMiiZdulI LUQOLLQZ-Ssbgfl-i :|a_|_ Eulqg'a'd ‘uauzuaus ‘umos peoa [pal-”4 ‘99 “ON ZSSSJppVI
b Adjust the vertical angle
of the ZXSDR B88922.
Installing the ZXSDR 888922 on the Wall
Installation Tools
C Secure the vertical fastening screws.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Title                           : 
Author                          : 
Creator                         : Tracker's PDF-Tools
Subject                         : 
Producer                        : PDF-XChange (PDFTools3.exe v3.60.0106) (Windows)
Page Count                      : 7
Page Mode                       : UseNone
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools