Zebra Technologies 7528PA GSM/GPRS/UMTS/HSPA+ Module User Manual RA3051 Installation Sheet

Download:
Mirror Download [FCC.gov]
Document ID	2195409
Application ID	WNNrj+SV3AByCa7Z3Dj3/g==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.22kB (177782 bits)
Date Submitted	2014-02-20 00:00:00
Date Available	2014-08-04 00:00:00
Creation Date	2017-10-23 22:01:24
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 22:01:24
Document Title	RA3051 Installation Sheet
Document Creator	FrameMaker 9.0
Document Author:	E. Szabo

RA3051 WWAN RADIO KIT WITH ANTENNAS (WAN/GPS/WI-FI DIVERSITY)
INSTALLATION SHEET
Warning: Installation of any components must be performed using appropriate anti-static devices. If unavailable, discharge body static by touching a grounded metallic object before opening any covers on the hand-held.
Note:
If the unit does not have an imager or scanner end-cap attached, the WA6212 long blank end-cap is required.
The WA6212 end-cap is not included in the RA3051 kit. It must be ordered separately.
The RA3051 radio kit includes the UMTS PHS8-P Expansion Module along with the following:
•
M2x4 Torx T6 screws (x4)
•
GPS jumper cable
•
WAN main antenna
•
WAN diversity antenna
1.
2.
Remove the end-cap (x4 screws) and back cover (x6 screws).
Remove the metal frame (x4 screws), and remove the existing Wi-Fi antenna.
Metal
frame
3.
Wi-Fi antenna
Slide the Diversity Antenna into the grooves along the right side of the unit.
Wi-Fi Diversity antenna
4.
Route the cables as indicated on the board – insert the red Wi-Fi antenna into the socket labelled Red and the
green GPS antenna into the socket labelled Green. Secure the cables by routing them through the clips.
Route cables through clips
GPS antenna (green)
Wi-Fi Main antenna (red)
© 2014 Motorola Solutions, Inc. All Rights Reserved.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
February 18, 2014
8000323A
5.
Slide the Main antenna into the grooves on the left side of the unit until it is anchored in place. Insert the black
antenna to the socket labelled Black. Route it through the clips to secure it in place. Next, connect the grey GPS
jumper cable as shown.
GPS jumper
cable
Main antenna
6.
Snap the WAN module onto the hand-held board, making sure to align the module pins with those on the board.
Insert 3 screws torqued to 2.5 in. lbs. Next, insert the yellow Diversity antenna into the socket labelled Yellow.
Connect the grey GPS cable, tucking it under the corner of board as shown. Insert the blue Main antenna into the
socket labelled Blue. Tuck the blue Main antenna under the WAN module shield. The cable should follow the silk
screen routing.
WAN module
Blue main
antenna
Yellow diversity
antenna
Grey GPS antenna
7.
Add the fourth screw to secure the WAN module in place.
Fourth screw
8.
9.
Replace the metal frame, sliding it in from the top. Take care not to damage the cables that have been connected.
Insert the four screws to a torque of 2.5 in. lbs.
Install the back cover (x6 screws) and the end-cap (x4 screws). Each is torqued to 2.5 in. lbs.
COMPANY HEADQUARTERS
Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
SUPPORT SERVICES
Contact the Motorola Solutions Global Customer Support at:
http://www.motorolasolutions.com/support.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : E. Szabo
Create Date                     : 2010:10:12 17:05:48Z
Keywords                        : Instruction, Sheet
Modify Date                     : 2014:02:20 16:24:26+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : FrameMaker 9.0
Metadata Date                   : 2014:02:20 16:24:26+08:00
Producer                        : Acrobat Distiller 10.1.9 (Windows)
Format                          : application/pdf
Title                           : RA3051 Installation Sheet
Creator                         : E. Szabo
Subject                         : Instruction Sheet
Copyright                       : 2011 Psion Inc.
Document ID                     : uuid:a7f59d82-ff53-4f9c-9548-5a42249f130e
Instance ID                     : uuid:4bf0f6b3-c25d-43d8-abb0-5024bef823ad
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools