Zebra Technologies MC55N0 ENTERPRISE DIGITAL ASSISTANT (EDA) User Manual REVISED 4

Zebra Technologies Corporation ENTERPRISE DIGITAL ASSISTANT (EDA) REVISED 4

UserManual.wiki >

Zebra Technologies >

MC55N0 User Manual >

REVISED USER MANUAL 4

Contents

REVISED USER MANUAL 4

Bluetooth 4 - 7Figure 4-4Select a Bluetooth Device7. Tap Next. The Enter Passcode window appears.Figure 4-5Enter Passcode8. Enter the Passcode on the other device. The device is added to the Bluetooth list.You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device.9. If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the created passcode to establish a paired connection. (If you entered a passcode from the device, you shouldn’t have to do anything on the other device.)10. When the connection is complete, a list of matching and supported services on the device appears.11. Select the services you want to use and tap Finish. The services on the new devices have to be selected or else the pairing won’t include those services, even though the devices are paired. If services are not selected, you will be continually reprompted for the passcode from the device.12. The device appears in the list on the main window.After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection.NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter Passcode window does not appear.

4 - 8 MC55A0/MC55N0 Enterprise Digital Assistant User GuideAvailable ServicesThe MC55 with Microsoft Bluetooth stack offers the following services:•OBEX Object Push Services via Beam•Serial Port Services•Personal Area Networking Services•PBAP Services•Dial-up Networking Services•A2DP/AVRCP Services.See the following sections for information on these services.Object Push Services via BeamUse the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the MC55 and another Bluetooth enabled device:1. Ensure that Bluetooth is enabled and discoverable on both devices.2. Ensure that the two devices are within 30 feet (10 meters) of one another.3. Tap > Programs > File Explorer.4. Navigate to the file to transfer.5. Tap and hold on the filename until the pop-up menu appears.Figure 4-6File Explorer Window6. Select Beam File. The MC55 searches for Bluetooth devices in the area.7. Tap Tap to send next to the Bluetooth device to send the file to. The MC55 communicates with the device and send the file. When completed, Tap to send changes to Done.NOTE Some devices might not require a PIN. This depends upon the device’s authentication.NOTE You can only send files to a remote device using the Beam function.

Bluetooth 4 - 9Figure 4-7Beam File WindowTo transfer a contact between the MC55 and another Bluetooth enabled device:1. Ensure that Bluetooth is enabled and discoverable on both devices.2. Ensure that the two devices are within 30 feet (10 meters) of one another.3. Tap > Contacts.4. Navigate to the contact to transfer.5. Tap and hold on the contact until the pop-up menu appears.Figure 4-8Contact Window6. Select Send Contact > Beam. The MC55 searches for Bluetooth devices in the area.7. Tap Tap to send next to the Bluetooth device to send the file to. The MC55 communicates with the device and send the contact. When completed, Tap to send changes to Done.Internet SharingInternet Sharing allows the user to connect a computer or laptop to the MC55 and use the MC55 as a modem to connect to an office network or ISP.To use MC55 as a modem using Bluetooth:1. Ensure that the device is not connected to the computer or laptop.2. On the MC55, ensure that the Phone is on and a data connection is configured.

4 - 10 MC55A0/MC55N0 Enterprise Digital Assistant User Guide3. Tap > Programs > Internet Sharing.4. In the PC Connection list, select Bluetooth PAN.5. In the Network Connection list, select the connection type.Select the network connection that the device should use to connect to the Internet.6. Tap Connect.7. On the computer or laptop, setup a Bluetooth PAN with your device.a. Select > Control Panel > Network Connections.b. Under Personal Area Network, select Bluetooth Network Connection.c. Right-click on Bluetooth Network Connection and select View Bluetooth network devices.d. In the Bluetooth Personal Area Network Devices window select your device.e. Click Connect. The computer connects to the device via Bluetooth.8. To verify, on the PC or laptop, launch Internet Explorer and open a web site.9. To end dial-up networking, on the MC55 tap Disconnect.Serial Port ServicesUse the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the application that will use the connection to the correct serial port.To establish a serial port connection:1. Ensure that Bluetooth is enabled and discoverable on both devices.2. Ensure that the two devices are within 30 feet (10 meters) of one another.3. Tap > Settings > Connections > Bluetooth > Devices.4. Tap Add new device. The MC55 begins searching for discoverable Bluetooth devices in the area.5. Select a device from the list.6. Tap Next. The Enter Passcode window appears.7. Enter the Passcode and the tap Next. The device is added to the Bluetooth list.8. In the device list, tap the serial device. The Partnership Settings window displays.9. Select the Serial Port checkbox.10. Tap Save.11. Tap COM Ports.12. Tap New Outgoing Port. The add device window appears.NOTE If your computer is Bluetooth-enabled and you select Bluetooth as the PC connection, you must initiate and complete the Bluetooth PAN partnership before Internet Sharing will work. For more information, refer to Windows Help and Support.NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter Passcode window does not appear.

Bluetooth 4 - 1113. Select the serial device in the list and then tap Next.14. Select a COM port from the drop-down list.15. Tap Finish.ActiveSync Using Serial Port ServicesUse the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable connection. You must configure the application that will use the connection to the correct serial port.To set up a Bluetooth ActiveSync connection:Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device.1. Ensure that Bluetooth is enabled and discoverable on both devices.2. Ensure that the two devices are within 30 feet (10 meters) of one another.3. On the computer, click > Settings > Control Panel.4. Double-click Bluetooth Devices.5. On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this computer checkboxes.NOTE By default, Secure Connection checkbox is set enabling Security Level 3 (Linked Level Encryption).NOTE No connection is made at this point. An application must open the selected COM port to trigger Microsoft Bluetooth stack to open the connection.NOTE For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS adapter) before connecting to the computer to pass though to the Internet or a network. For more information on network bridging, see Windows Help on your computer.The instructions below are for computers that support the Windows XP SP2 or later version operating system.

4 - 12 MC55A0/MC55N0 Enterprise Digital Assistant User GuideFigure 4-9Computer Bluetooth Devices Window6. On the COM Ports tab, click Add.7. Select the Incoming (device initiates the connection) option, then click OK.Note the number of the COM port that was added.8. Click OK.9. Click > All Programs > Microsoft ActiveSync.10. Click File > Connection Settings.Figure 4-10ActiveSync Connection Settings11. On the Allow connections to one of the following drop-down list, select the COM port with the number you noted earlier.12. On the MC55, tap > Programs > ActiveSync.13. Tap Menu > Connect via Bluetooth.Synchronization is automatically initiated. The ActiveSync icon appears on the lower right corner of the Today screen.

4 - 14 MC55A0/MC55N0 Enterprise Digital Assistant User GuideUsing Bluetooth StoneStreet One Bluetooth StackThe following sections provide information on using the Stone Street One Bluetooth stack.Turning the Bluetooth Radio Mode On and OffTurn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the radio is off, other Bluetooth devices cannot see or connect to the MC55. Turn on the Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity. Disabling BluetoothTo disable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the Connectivity dialog box. Tap the blue Bluetooth bar to turn off the Bluetooth radio.Enabling BluetoothTo enable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the Connectivity dialog box. Tap the blue Bluetooth bar to turn on the Bluetooth radio.ModesThe BTExplorer application has two modes for managing Bluetooth connections: Wizard Mode and Explorer Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users. To switch between modes, select View > Wizard Mode or View > Explorer Mode.Wizard ModeWizard Mode provides a simple process for discovering and connecting to Bluetooth devices.Wizard Mode shows the devices and services in a simple Favorites view created by following the step-by-step wizard.Explorer ModeThe Explorer Mode window is easy to navigate and provides greater control to users familiar with Bluetooth. The menu bar provides quick access to the options and tools used to connect to devices. To access Explorer Mode, tap View > Explorer Mode.NOTE To achieve the best battery life turn off radios not in use.NOTE Switching between Wizard Mode and Explorer Mode closes all active connections.

4 - 16 MC55A0/MC55N0 Enterprise Digital Assistant User GuideFigure 4-12BTExplorer Window7. Select Explore Services on Remote Device or another from the drop-down list and tap Next.8. BTExplorer searches for Bluetooth devices in the area.Figure 4-13Discover Devices Dialog BoxThe discovered devices display in the Select Remote Device window.NOTE If a device discovery action has not been previously performed, a device discovery is automatically initiated. If a device discovery has previously been performed, the device discovery process is skipped, and the previously found list of devices displays. To start a new device discovery, tap and hold in the window and select Discover Devices from the pop-up menu.

Bluetooth 4 - 17Figure 4-14Select Remote Device Window9. Select a device from the list and tap Next. The MC55 searches for services on the selected Bluetooth device.Figure 4-15Device Services10. Select a service from the list and press Next. The Connection Favorite Options window appears.Figure 4-16Connection Favorite Options Window11. In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.NOTE If the MC55 discovers a service but the service is not supported, the service icon is grayed-out.

Bluetooth 4 - 19Figure 4-18File Transfer Window7. Double-tap the file to copy. The Save Remote File window appears.Figure 4-19Save Remote File Window8. Tap and hold on the file. A pop-up menu appears.9. Select the action to perform:•New - create a new file or folder on the remote device•Delete - delete the selected file on the remote device.•Get File - copy the file from the remote device to the MC55.•Put File - copy a file from the MC55 to the remote device.Creating a New File or FolderTo create a new folder or file on the remote device:1. Tap and hold on the screen and select New > Folder or New > File. The Create New Folder or Create New File window appears.2. Enter the name for the new folder or file.3. Tap OK to create the new folder or file on the remote device.Deleting a FileTo delete a file from the remote device:

4 - 22 MC55A0/MC55N0 Enterprise Digital Assistant User GuideFigure 4-22Select Dial-up Networking Entry Window11. Select the entry and tap OK. The MC55 begins to communicate with the Bluetooth phone. If required, the phone requests permission to communicate with the MC55.12. Confirm the connection on the phone. The Network Log On window appears.13. In the User name text box, enter the user name for this connection.14. In the Password text box, enter the password for this connection.15. In the Domain text box, enter the domain name for this connection, if required.16. Tap Finish or Connect.17. The phone begins dialing and connects to the network.18. To end a session, tap the Connection icon and then tap Disconnect in the dialog box.Add a Dial-up EntryTo add a dial-up entry:1. In the Select Dial-up Networking Entry window, tap and hold and then select Add Entry from the pop-up menu.Figure 4-23Select Dial-up Networking Entry Window2. The Add Phone Book Entry window appears.

4 - 24 MC55A0/MC55N0 Enterprise Digital Assistant User GuideSending a ContactTo send a contact to another device:1. Tap and hold on OBEX Object Push and select Connect.Figure 4-25OBEX Object Push Window2. In the Action: drop-down list, select Send Contact Information.3. Tap . 4. Select a contact to send to the other device.5. Tap OK.6. Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to accept the contact. A Send Contact dialog appears.7. Tap Ok.Swapping ContactsTo swap contacts with another device:1. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a contact.NOTE Prior to swapping contacts, a default contact must be set up before attempting to send a contact.Ensure that the MC55 is connectable.

Bluetooth 4 - 25Figure 4-26OBEX Object Push Window2. In the Action: drop-down list, select Swap Contact Information.3. Tap . The Select Contact Entry window appears.4. Select a contact to send to the other device.5. Tap OK.6. Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to accept the contact.7. Tap Ok.Fetching a ContactTo fetch a contact from another device:1. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.Figure 4-27OBEX Object Push Window2. In the Action: drop-down list, select Fetch Contact information.3. Tap OK. The contact on the other device is copied.NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a contact.Ensure that the MC55 is connectable.

4 - 26 MC55A0/MC55N0 Enterprise Digital Assistant User GuideSending a PictureTo send a picture to another device:1. Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.Figure 4-28OBEX Object Push Window2. In the Action: drop-down list, select Send A Picture.3. Tap . The Send Local Picture window appears.Figure 4-29Send Local Picture Window4. Navigate to the picture to send to the other device.5. Tap Open.6. Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to accept the picture. A Send Picture dialog appears.7. Tap Ok.Headset ServicesTo connect to a Bluetooth headset:NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual for more information.

Bluetooth 4 - 31Figure 4-32Select Remote Device Window5. Select a device from the list and tap Next. The PIN Code Request window appears.Figure 4-33Connection Favorite Options Window6. In the PIN Code field, enter the PIN code.7. Tap OK. The Pairing Status window displays.8. Tap Finish. The devices are successfully paired. The device name moves to the Trusted Devices window.Deleting a Bonded DeviceTo delete a device no longer needed:1. Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.2. Tap Menu > Trusted Devices. The Trusted Devices window appears.3. Tap and hold on the device select Delete Link Key in the pop-up menu.4. A confirmation dialog appears. Tap Yes.Accepting a BondWhen a remote device wants to bond with the MC55, enter a PIN when requested to grant permission.1. Ensure that the MC55 is set to discoverable and connectable. See Bluetooth Settings on page 4-32. When prompted to bond with the remote device the PIN Code Request window appears.

4 - 32 MC55A0/MC55N0 Enterprise Digital Assistant User GuideFigure 4-34PIN Code Request Window2. In the PIN Code: text box, enter the same PIN entered on the device requesting the bond. The PIN must be between 1 and 16 characters.3. In the Device Name: text box, edit the name of the device requesting the bond, if desired.4. Tap OK to create the bond. The MC55 can now exchange information with the other device.Bluetooth SettingsUse the BTExplorer Settings window to configure the operation of the BTExplorer application. Tap Menu > Settings.Device InfoUse Device Info to configure the MC55’s Bluetooth connection modes.ServicesUse Services to add or delete Bluetooth services.Table 4-3Device Info DataItem DescriptionDevice Name Displays the name of the MC55.Discoverable Mode Select whether or not the MC55 is discoverable by other Bluetooth devices.Connectable Mode Select whether or not the MC55 is connectable by other Bluetooth devices.NOTE Ensure that the MC55 is discoverable and connectable when remote devices use MC55 services.

Bluetooth 4 - 33Figure 4-35BTExplorer Settings - ServicesTo add a service:1. Tap Add.Figure 4-36Add Local Service Window2. In the list, select a service to add.3. Tap OK. The Edit Local Service window displays for the selected service.4. Select the appropriate information and then tap OK. See the following sections for information on the available services.Dial-Up Networking ServiceDial-up Networking allows other Bluetooth devices to access a dial-up modem.Table 4-4Dial-up Networking Information DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.

4 - 34 MC55A0/MC55N0 Enterprise Digital Assistant User GuideFile Transfer ServiceFile transfer allows other Bluetooth devices to browse files.Figure 4-37BTExplorer Settings - File Transfer InformationHands-Free Audio Gateway ServiceHands-Free Service Audio Gateway allows connection to hands-free devices.Headset Audio Gateway ServiceHeadset Service Audio Gateway allows connection to headset devices.Local COM Port Select the COM port.Local Baud Rate Select the communication baud rate.Local Port Options Select the port option.Table 4-5File Transfer Information DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.Root Directory Select the directory that other Bluetooth devices can access.File Permissions Select the file permissions for the selected directory. Check the appropriate box to grant read access, write access, and delete access.Table 4-6Hands-Free Audio Gateway Dataitem DescriptionService Name Lists the name of the audio service.Table 4-4Dial-up Networking Information DataItem Description

Bluetooth 4 - 35IrMC Synchronization ServiceThe IrMC Synchronization service used to synchronize PIM contacts between a remote device and the MC55.OBEX Object Push ServiceOBEX Object Push allows other Bluetooth devices to push contacts, business cards, pictures, appointments, and tasks to the MC55.Personal Area Networking ServicePersonal Area Networking hosts a Personal Area Network which allows communication with other Bluetooth devices.Table 4-7Headset Audio Gateway DataItem DescriptionService Name Lists the name of the audio service.Table 4-8IrMC Synchronization DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.Phonebook Select the Phonebook checkbox to allow synchronization with the MC55’s contacts.Select Read, Write, Create and/or Delete to allow phonebook permissions.Table 4-9OBEX Exchange Information DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.Do not allow clients to push objects Disables clients from pushing objects to the MC55.Inbox Directory Select a directory where another Bluetooth device can store files.Table 4-10Personal Area Networking DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.Support Group Ad-Hoc Networking Select to enable Ad-Hoc networking.

4 - 36 MC55A0/MC55N0 Enterprise Digital Assistant User GuideSerial Port ServiceSerial port allows other Bluetooth devices to access COM ports.Advanced Audio Distribution ServiceAdvanced Audio Distribution hosts connects from Bluetooth devices supporting high-quality stereo audio.Audio Video Remote Control ServiceAudio Video Remote Control hosts connections from Bluetooth devices supporting audio remote-control functionality.SecuritySecurity settings allows you to set global security policies for Bluetooth. Note that these settings are only active on local Services that are set to Authenticate or Authenticate/Encryption. You can set authentication on local Services under Services.To adjust the security settings for an individual service, select Services first, then select the individual service, then Properties.Table 4-11Serial Port Services DataItem DescriptionService Name Displays the name of the service.Service Security Select the type of security from the drop-down list. Options are None, Authenticate, or Authenticate/Encrypt.Local COM Port Select the COM port.Local Baud Rate Select the communication baud rate.Local Port Options Select the port option.Table 4-12Advanced Audio Distribution DataItem DescriptionService Name Lists the name of the audio service.Table 4-13Audio Video Remote Control DataItem DescriptionService Name Lists the name of the audio service.

Bluetooth 4 - 37Figure 4-38BTExplorer Settings - SecurityDiscoveryUse Discovery to set and modify discovered devices.Figure 4-39BTExplorer Settings - DiscoveryNOTE To use PIN Code, select Authenticate or Authenticate/Encrypt from the Service Security drop-down list on each local service.Table 4-14Security DataItem DescriptionUse PIN Code (Incoming Connection) Select for automatic use of the PIN code entered in the PIN Code text box. It is recommended not to use this automatic PIN code feature. See Security on page 4-2 for more information.PIN Code Enter the PIN code.Encrypt Link On All Outgoing Connections Select to enable or disable encryption on all outgoing connections to other Bluetooth devices.

4 - 40 MC55A0/MC55N0 Enterprise Digital Assistant User Guide

CHAPTER 5 ACCESSORIESIntroductionTable 5-1 lists the accessories available for the MC55.Table 5-1MC55 Accessories Accessory Part Number DescriptionCradlesSingle-slot USB Cradle CRD5500-1000UR Charges the MC55 main battery and a spare battery. Synchronizes the MC55 with a host computer through a USB connection.Single-slot Ethernet/Modem/USB CradleCRD5500-1000XR Charges the MC55 main battery and a spare battery. Synchronizes the MC55 with a host computer through an Ethernet, Modem or USB connection.Four-slot Charge Only Cradle CRD5500-4000CR Charges up to four MC55 devices.Vehicle Holder VCH5500-1000R Provides an alternative mounting solution for the MC55 in a vehicle. Requires the Auto Charge cable for charging the MC55 battery.ChargersFour-slot Spare Battery Charger SAC5500-4000CR Charges up to four MC55 batteries.USB Charging Cable KT-108022-03R Provides power to the MC55 and USB communication with a host computer.Charge Only Cable 25-112560-01R Connects to a power supply to provide power to the MC55.Auto Charge Cable VCA5500-01R Charges the MC55 using a vehicle’s cigarette lighter.MiscellaneousMagnetic Stripe Reader MSR5500-100R Snaps on to the MC55 and adds magnetic stripe reading capabilities.Trigger Handle TRG5500-100R Adds a gun-style handle with a scanning trigger to the MC55.DEX Cable 25-127558-01R Connects the MC55 to a vending machine.

5 - 2 MC55A0/MC55N0 Enterprise Digital Assistant User GuideSpare 2400 mAh lithium-ion battery BTRY-MC55EAB00BTRY-MC55EAB00-10BTRY-MC55EAB00-50Replacement 2400 mAh battery (MC55 only).10-pack.50-pack.Spare 3600 mAh lithium-ion battery BTRY-MC55EAB02BTRY-MC55EAB02-10BTRY-MC55EAB02-50Replacement 3600 mAh battery.10-pack.50-pack.Spare 3600 mAh lithium-ion battery BTRY-MC55EAB02-H Replacement 3600 mAh battery (MC55-HC only).Belt Mounted Rigid Holster SG-MC5511110-01R Clips onto belt to hold the MC55 when not in use.Fabric Holster SG-MC5521110-01R Soft holder for added protection.Stylus KT-119150-03RKT-119150-50R Replacement stylus (3-pack).Replacement stylus (50-pack).Stylus Stylus-HC005-03RStylus-HC005-50R Replacement stylus for MC55-HC (3-pack)Replacement stylus for MC55-HC (50-pack)Spring Loaded Stylus STYLUS-00001-03RSTYLUS-00001-10R Optional spring loaded stylus (3-pack).Optional spring loaded stylus (10-pack).Tether KT-122621-03RKT-122621-50R Replacement tether (3-pack)Replacement tether (50-pack)Anti-bacterial Handstrap SG-MC5523341-01R Replacement handstrap for MC55-HC only.Wall Mounting Kit 8710-050006-01R Use for wall mounting the Four-slot cradles.Screen Protector KT-67525-01R Package of 3 screen protectors.Software - Enterprise Mobility Developer Kits (EMDKs), available at: http://supportcentral.motorola.com.Table 5-1MC55 Accessories (Continued)Accessory Part Number Description

Accessories 5 - 3Single-slot USB CradleThis section describes how to use a Single-slot USB cradle with the MC55. For USB communication setup procedures refer to the MC55 Integrator Guide.The Single-slot USB Cradle:•Provides 5.4 VDC power for operating the MC55.•Synchronizes information between the MC55 and a host computer. Refer to the MC55 Integrator Guide for information on setting up a partnership between the MC55 and a host computer.•Charges the MC55’s battery.•Charges a spare battery.Charging the MC55 BatteryConnect the cradle to power. Insert the MC55 into the slot to begin charging.Figure 5-1MC55 Battery ChargingCharging/Battery Status LED

5 - 4 MC55A0/MC55N0 Enterprise Digital Assistant User GuideCharging the Spare BatteryFigure 5-2Spare Battery ChargingBattery Charging IndicatorsThe Single-slot USB Cradle charges the MC55’s main battery and a spare battery simultaneously.The MC55’s charge LED indicates the status of the battery charging in the MC55. See Table 1-1 on page 1-6 for charging status indications.The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle. See Table 5-2 for charging status indications.The 2400 mAh battery fully charges in less than four hours and the 3600 mAh battery fully charges in less than six hours.Charging TemperatureCharge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the MC55. To accomplish this, for small periods of time, the MC55 or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures. The MC55 or accessory indicates when charging is disabled due to abnormal temperatures via its LED. See Table 1-1 on page 1-6 and Table 5-2.Spare Battery Spare Battery Charging LED

Accessories 5 - 5Table 5-2 Spare Battery LED Charging Indicators Spare Battery LED(on cradle) IndicationOff Battery is not charging; battery is not inserted correctly in the cradle; cradle is not poweredSlow Blinking Amber Spare battery is charging.Solid Amber Charging complete.Fast Blinking Amber Charging error.

5 - 6 MC55A0/MC55N0 Enterprise Digital Assistant User GuideSingle-slot Ethernet/Modem/USB CradleThe CRD5500-1000XR cradle provides connection to a host computer using USB, a dial-up network using the modem or an Ethernet network.Refer to the MC55 Integrator Guide for information on setting up the cradle.Country SettingsThe modem defaults to operation with US telephone networks. To operate the modem with other country telephone networks, it must be configured using an application on the MC55. Download the Cradle Modem Country Configurator Application Software for MC55xx package from the Motorola Support Central web site: http://www.motorola.com/enterprisemobility/support.Following the instructions with the software package to install the application on the MC55.The application includes country selections for all supported countries and automatically programs the modem and adjust its operating parameters to comply with the telephone network in the selected country.Connection SetupFigure 5-3Connection SetupFigure 5-4Connection SwitchPower SupplyEthernet Power PortAC Line CordUSB Port Phone PortEthernet HubModem USB Ethernet

Accessories 5 - 7IndicatorsFigure 5-5Indicators•Spare Battery Charging LED - Indicates the charging status of the spare battery.•Ethernet/Modem LED - Blink whenever Ethernet or modem connectivity is established.•Speed LED (green)- Indicates that the transfer rate is 100 Mbps. When it is not lit it indicates that the transfer rate is 10 Mbps.•Link LED (yellow) - Blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit it indicates there is no link.OperationEthernet ConnectionPlace the Connection switch on the bottom of the cradle to the Ethernet position.Place the MC55 into the cradle.To test the connection, tap > Programs > Internet Explorer. Enter a web address.Modem ConnectionPlace the Connection switch on the bottom of the cradle to the Modem position.Place the MC55 into the cradle.The MC55 dials the phone number and connects to the web site.Ethernet/Modem LEDSpare Battery Charging LEDSpeed LED Link LEDNOTE The CRD5500-1000XR does not support hot swapping between operational modes. After moving the switch into a different position, remove the MC55 from the cradle and then re-insert into the cradle.

Navigation menu