Zebra Technologies MD-TRCV-9CMHZ Modular Low Power Radio Transceiver User Manual 916 Wireless

Zebra Technologies Corporation Modular Low Power Radio Transceiver 916 Wireless

Data Sheet

916 Wireless916 MHz TransceiverPart Number: CC15431-1FeaturesThe Comtec Wireless 916 is a 916Mhz radio designed for OEM applica-tions that operate in the unlicensedFCC band between 902-928 Mhz. TheWireless 916 can be used for commu-nications where physical connectionElectricalInput Voltage: Vcc = 5 Volts +,-10%Power Dissipation: 50mW (receive mode)50mW (transmit mode)5 mW (sleep mode)Current Consumption: 10 mA (receive mode)10 mA (transmit mode)1 mA (sleep mode)Operating Frequency: 916.5 MhzTransmit Power Output: -5dBm (typical)Receiver Sensitivity: -85 dBm (typical)Out of band interferingsignal rejection: 60 dB (typical)Baud rate: user selectable, up to 19,200 bpsJ1 Pin Assignments: Pin # Signal Name2DescriptionPin 1 sleep/awake* 1 = sleepPin 2 VccPin 3 RXD Receive DataPin 4 TX/RX* 1 = transmitPin 5 No connectPin 6 TXD Transmit DataPin 7 GNDPin 8 GNDJ2 Pin Assignments: Pin # Signal Name(Optional) Pin 1 GNDPin 2 GNDJ3 Pin Assignments: Pin # Signal Name(Optional) Pin 1 GNDPin 2 GNDis not desired. The following objectivescan be achieved with the Wireless 916, (i) provides alimited range radio (20-30 feet line of sight), (ii) mini-mizes parts count and associated cost, (iii) acts as acable replacement when used together with ComtecWireless printers. When combined with Comtec’s In-telligent Wireless Controller (part number CQ13967),the Wireless 916 can be attached to any RS232C port.To minimize integration headaches, the Wireless 916has modular FCC approval, which means that no ad-ditional FCC approval is required by the OEM1.Actual Size
916 Wireless Block Diagram(Part Number CC13626)Software When the Intelligent Wireless Controller (P/N CQ13967) is not used, Comtec can provide Csource code for a CS/CDMA collision avoidance communications protocol. This softwaresupports multiple radio pairs operating in proximity to each other, and implements errordetection, retries and radio address association. The radio address association algorithm isbased on radio or product serial number.Regulatory Approvals: FCC Modular, ID Number: I28MD-TRCV-9CMHZCanada T.B.D.Physical Connectors: Antenna - SSMT, M/A-COM part number 2367-5002-54Data - (J1) 8 pin female, Samtec part number SLM-108-01-S-SGround (J2 & J3)- 2 pin female, Samtec part number SLM-102-01-S-STX SECTION DATABUFFERSDATA BUFFERSCONTROL LOGICTXDRXDSLEEP/AWAKE*TX/RX*RX SECTIONTRANSCIEVERMODULE0.0000.000 0.0000.3960.1960.2750.5000.8040.7251.0000..0900..2242..223 2..1891.1602..3572..4470.0000.210 0.2500.0620.080J1J2J31118.125, 2 placesAntenna ConnectorConnectors mate with Samtec MTMS family. Part number is dependent on desired boardspacing.Dimensions:©1996-2000 Comtec Information Systems, Inc. All rights reserved.Specifications for information purposes and are subject to change.All products and brand names are trademarks of their respective companies.ComtecTM is a registered trademark of Comtec Information Systems, Inc.4/00 Rev. 1.0.1Comtec antenna or equivalent is used.2All signals operate at CMOS levels.

Navigation menu