Zebra Technologies MD-TRCV-9CMHZ Modular Low Power Radio Transceiver User Manual 916 Wireless
Zebra Technologies Corporation Modular Low Power Radio Transceiver 916 Wireless
Data Sheet
916 Wireless 916 MHz Transceiver Part Number: CC15431-1 Features The Comtec Wireless 916 is a 916 Mhz radio designed for OEM applications that operate in the unlicensed FCC band between 902-928 Mhz. The Wireless 916 can be used for communications where physical connection is not desired. The following objectives can be achieved with the Wireless 916, (i) provides a limited range radio (20-30 feet line of sight), (ii) minimizes parts count and associated cost, (iii) acts as a cable replacement when used together with Comtec Wireless printers. When combined with Comtec’s Intelligent Wireless Controller (part number CQ13967), the Wireless 916 can be attached to any RS232C port. To minimize integration headaches, the Wireless 916 has modular FCC approval, which means that no additional FCC approval is required by the OEM1. Actual Size Electrical Input Voltage: Power Dissipation: Current Consumption: Operating Frequency: Transmit Power Output: Receiver Sensitivity: Out of band interfering signal rejection: Baud rate: Vcc = 5 Volts +,-10% 50mW (receive mode) 50mW (transmit mode) 5 mW (sleep mode) 10 mA (receive mode) 10 mA (transmit mode) 1 mA (sleep mode) 916.5 Mhz -5dBm (typical) -85 dBm (typical) 60 dB (typical) user selectable, up to 19,200 bps Pin # Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Signal Name2 sleep/awake* Vcc RXD TX/RX* No connect TXD GND GND J2 Pin Assignments: (Optional) Pin # Pin 1 Pin 2 Signal Name GND GND J3 Pin Assignments: (Optional) Pin # Pin 1 Pin 2 Signal Name GND GND J1 Pin Assignments: Description 1 = sleep Receive Data 1 = transmit Transmit Data 916 Wireless Block Diagram (Part Number CC13626) TX SECTION TRANSCIEVER MODULE DATA BUFFERS CONTROL LOGIC DATA BUFFERS RX SECTION TXD TX/RX* SLEEP/ AWAKE* RXD Software When the Intelligent Wireless Controller (P/N CQ13967) is not used, Comtec can provide C source code for a CS/CDMA collision avoidance communications protocol. This software supports multiple radio pairs operating in proximity to each other, and implements error detection, retries and radio address association. The radio address association algorithm is based on radio or product serial number. Regulatory Approvals: Physical Connectors: Antenna - SSMT, M/A-COM part number 2367-5002-54 Data - (J1) 8 pin female, Samtec part number SLM-108-01-S-S Ground (J2 & J3)- 2 pin female, Samtec part number SLM-102-01-S-S Connectors mate with Samtec MTMS family. Part number is dependent on desired board spacing. Dimensions: 2..189 1.160 FCC Modular, ID Number: I28MD-TRCV-9CMHZ Canada T.B.D. 1.000 0.804 0.725 0.500 0.275 0.196 J2 J3 J1 Comtec antenna or equivalent is used. All signals operate at CMOS levels. 0.396 2..223 2..357 2..447 0.000 0.000 0..090 0..224 0.000 .125, 2 places 0.210 0.250 0.000 0.062 0.080 Antenna Connector ©1996-2000 Comtec Information Systems, Inc. All rights reserved. Specifications for information purposes and are subject to change. All products and brand names are trademarks of their respective companies. ComtecTM is a registered trademark of Comtec Information Systems, Inc. 4/00 Rev. 1.0.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2000:04:13 16:04:13 Producer : Acrobat Distiller 4.0 for Macintosh Subject : 916 Wireless Creator : Adobe PageMaker 6.52 Title : 916 Wireless Author : comtec Modify Date : 2000:04:13 16:08:47-04:00 Page Count : 2EXIF Metadata provided by EXIF.tools