Zebra Technologies WT41N0 Wearable Terminal User Manual User Manaul
Zebra Technologies Corporation Wearable Terminal User Manaul
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. User Manual Statements
- 4. User Manaul.pdf
User Manaul.pdf
Zebra reserves the right to make changes to any product to improve
reliability, function, or design. Zebra does not assume any product
liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein. No license is
granted, either expressly or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or
process in which Zebra products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Zebra
products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the
equipment, they will contact the Zebra Support at: http://
www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/
support.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks
are the property of their respective owners.
©2015 ZIH Corp and/or its affiliates. All rights reserved.
72-159559-04 Rev. A — May 2015
WT41N0
REGULATORY GUIDE
Regulatory Information
This guide applies to the following Model Numbers: WT41N0.
All Zebra devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Local language translations are available at the following
website: http://www.zebra.com/support.
Any changes or modifications to Zebra equipment, not
expressly approved by Zebra, could void the user's authority
to operate the equipment.
Declared maximum operating temperature: 50°C.
Radio Modules
The device contain approved radio module(s). These
module(s) are identified below.
Zebra XWing 2 802.11a/b/g/n radio module, Type: 21-
148603-0B
Bluetooth
®
Wireless Technology
This is an approved Bluetooth product. For more information
or to view the End Product Listing, please visit http://
www.bluetooth.org/tpg/listings.cfm.
Wireless Devices Country Approvals
Regulatory markings, subject to certification, are applied to
the device signifying the radio(s) is/are approved for use in
the following countries: United States, Canada, Japan, China,
S. Korea, Australia, and Europe 1.
Please refer to the Zebra Declaration of Conformity (DoC) for
details of other country markings. This is available at http://
www.zebra.com/doc.
Note 1: For 2.4GHz or 5GHz Products: Europe includes,
Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.
Ad-Hoc Operation (2.4 GHz band)
Ad-Hoc operation is limited to Channels 1-11 (2412-2462
MHz).
Frequency of Operation - IC
5 GHz Only
The use in the UNII (Unlicensed National Information
Infrastructure) band 1 (5150 - 5250 MHz) is restricted to
Indoor Use Only; any other use will make the operation of this
device illegal.
Industry Canada Statement:
Caution: The device for the band 5150 - 5250 MHz is only for
indoor usage to reduce potential for harmful interference to
co-Channel mobile satellite systems. High power radars are
allocated as primary users (meaning they have priority) of
5250 - 5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande
5150 - 5250 MHz est réservé uniquement pour une utilisation
à l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250 - 5350 MHz et 5650 - 5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by
firmware.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a neutral postures
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (including
safety systems). Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Position your device within easy reach. Be able to access
your device without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle
horn to sound or lights to flash, on receipt of a call on public
roads, is not permitted.
IMPORTANT
Before installing or using, check state and local laws
regarding windshield mounting and use of equipment.
For Safe Installation
• Do not put your phone in a location that obstructs the
drivers vision or interferes with the operation of the
Vehicle.
• Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting
down a “to do” list or flipping through your address book
takes attention away from your primary responsibility, driving
safely.
When driving a car, driving is your first responsibility - Give
full attention to driving. Check the laws and regulations on the
use of wireless devices in the areas where you drive. Always
obey them.
When using a wireless device behind the wheel of a car,
practice good common sense and remember the following
tips:
1. Get to know your wireless device and any features such as speed
dial and redial. If available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your mirrors,
then continue.
5. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving
and suspend conversations that have the potential to divert your
attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
The call can be made regardless of any security codes and
depending on a network, with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see
an auto accident, crime in progress or other serious emergency
where lives are in danger, call the Emergency Services, (9-1-1 in
the US, and 1-1-2 in Europe) or other local emergency number, as
you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special non-
emergency wireless number.
“The wireless industry reminds you to use your device /
phone safely when driving.”
Please observe all warning notices with regard to the usage
of wireless devices.
Potentially Hazardous Atmospheres - Vehicles
Use
You are reminded of the need to observe restrictions on the
use of radio devices in fuel depots, chemical plants etc. and
areas where the air contains chemicals or particles (such as
grain, dust, or metal powders) and any other area where you
would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed
to do so by airport or airline staff. If your device offers a 'flight
mode' or similar feature, consult airline staff as to its use in
flight.
Wireless devices transmit radio frequency energy and may
affect medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities.
These requests are designed to prevent possible interference
with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of
15 cm (6 inches) be maintained between a handheld wireless
device and a pacemaker to avoid potential interference with
the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless
Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15 cm (6 inches) from
their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the
potential for interference.
• If you have any reason to suspect that interference is taking place,
turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the
medical device, to determine if the operation of your wireless
product may interfere with the medical device.
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions
supplied.
International
The device complies with internationally recognized
standards covering human exposure to electromagnetic
fields from radio devices. For information on “International”
human exposure to electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at http://www.zebra.com/
doc.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and
similar accessories to ensure EU Compliance.
US and Canada
Co-located Statement
To comply with FCC RF exposure compliance requirement,
the antenna used for this transmitter must not be co-located
or operating in conjunction with any other transmitter/antenna
except those already approved in this filing.
Handheld Devices
This device was tested for typical body-worn operation. Use
only Zebra tested and approved belt-clips, holsters, and
similar accessories to ensure FCC Compliance. The use of
third-party belt-clips, holsters, and similar accessories may
not comply with FCC RF exposure compliance requirements,
and should be avoided.
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry battery
producing or importing firms in
accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on
the batteries used in sales, giveaway or promotion. Contact a
qualified Taiwanese recycler for proper battery disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have
battery charging capability are approved for use with the
following battery models:
• Zebra BTRY-WT40IAB0E (3.7 VDC, 2330 mAh), WT40IAB0H
(3.7 VDC, 4660 mAh)
Zebra rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can
operate or be stored before needing replacement. Many
factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may occur.
Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity,
rusting of metallic parts and electrolyte leakage. When
storing batteries for one year or longer, the charge level
CAUTION Only use Zebra approved and UL Listed
accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.
CAUTION In order to avoid or minimize the potential risk
of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company’s safety programs to prevent employee
injury.
Warnings for Use of Wireless Devices
Safety in Hospitals
RF Exposure Guidelines
should be verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or
included as part of the mobile computer. For more
information on Zebra batteries, please visit: http://
www.zebra.com/batterybasics
Battery Safety Guidelines
• The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular
care should be taken where the device is charged in a non
commercial environment.
• Follow battery usage, storage, and charging guidelines
found in the user's guide.
• Improper battery use may result in a fire, explosion, or
other hazard.
• To charge the mobile device battery, the battery and
charger temperatures must be between +32 ºF and +104
ºF (0 ºC and +40 ºC).
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger,
contact Zebra support.
• To enable authentication of an approved battery, as
required by IEEE1725 clause 10.2.1, all batteries will carry
a Zebra hologram. Do not fit any battery without checking
it has the Zebra authentication hologram.
• For devices that utilize a USB port as a charging source,
the device shall only be connected to products that bear
the USB-IF logo or have completed the USB-IF
compliance program.
• Do not disassemble or open, crush, bend or deform,
puncture, or shred.
• Severe impact from dropping any battery-operated device
on a hard surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or
conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that
might get very hot, such as in a parked vehicle or near a
radiator or other heat source. Do not place battery into a
microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of
used re-chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been
swallowed.
• In the event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. If contact has been
made, wash the affected area with large amounts of water
and seek medical advice.
• If you suspect damage to your equipment or battery,
contact Zebra support to arrange for inspection.
Radio Frequency Interference Requirements-
FCC
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Interference Requirements
- Canada
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the
following restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie
Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage
reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Label Marking: The Term “IC:” before the radio certification
only signifies that Industry Canada technical specifications
were met.
Frequency of Operation
The use of 2.4 GHz RLAN's, for use through the EEA, have
the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Bluetooth Wireless Technology for use through the EEA has
the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Zebra hereby, declares that this device is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC and 2011/65/EU. A Declaration of
Conformity may be obtained from http://www.zebra.com/doc.
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
こ装置情報処理装置等電波障害自主規制協議会 Ｖ
ＣＣＩ基準に基くクラ B 情報技術装置すこ
装置家庭環境使用すこを目的しいますこ
装置ラオやテレビョン信機に近接し使用さ
信障害を引起こすこあます 扱説明書に
従っ正しい扱いをし下さい
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5 GHz RLAN's in Australia is restricted in the following
band 5.50 - 5.65GHz.
Brazil
Declarações Regulamentares para
Nota: “A marca de certificação se aplica ao Transceptor,
modelo WT41N0. Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo,
e não pode causar interferência a sistemas operando em
caráter primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Chile
“Este equipo cumple con la Resolución No 403 de 2008, de
la Subsecretaria de telecomunicaciones, relativa a
radiaciones electromagnéticas.”
China
Quality Certificate in Chinese when the factory has ISO 9001
certification.
Quality Cづrtiてicatづ
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
South Korean