Zhuhai HiVi Technology M300 Multimedia Active Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3884208
Application ID	CgTJA5AWVzLvpzlFzOD+DQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.7kB (558803 bits)
Date Submitted	2018-06-12 00:00:00
Date Available	2018-06-12 00:00:00
Creation Date	2018-04-04 15:19:20
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2018-04-04 15:19:20
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	Administrator

HiVi M300
Multimedia Active Speaker Manual
TREBLE
Due to the reasons in the change of design or others, product information contained here may
not be in conformity with product itself. We reserve the right of no prior notice before change.
BASS
INPUT / VOLUME
HiVi USA HiVi Acoustics, Inc.
11630 Goldring Road, Arcadia, CA 91006, USA
Tel:+1 626 930 0606 Fax:+1 626 930 0609 https://swanspeakers.com
Maintenance
Warning
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
a)
b)
c)
d)
e)
a) Avoid magnetic disturbance.
b) Do not place under the sunshine for a long time.
c) Do not place in high temperature or moist environment for a long time.
d) Do not touch the drivers with your hands.
e) Avoid corrosive liquids and gases.
Trouble Shooting
1. If there is problem with sound quality.
a) Check if all the drivers are working.
b) Check that audio cables are firmly connected at both ends.
2. If there is no sound from either of the speakers:
a) Check if the device is on and if a source is playing.
b) Check if the volume is not on minimum.
c) Check if there is broken or short circuit with the cable connecting speakers and audio
source.
3. If there is no sound coming from one of the speakers:
a) Check the setting of the audio source.
b) Check that all the audio cable are firmly connected at both ends.
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash is intended to alert you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute an
electric shock to persons.
The exclamation point is intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
Before connecting or using this apparatus, do read carefully all safety warning and
instructions. Please keep this instruction for future reference.
This device should be installed or set up in a position that ventilation can be assured.
Never put the device in a place that air flow over the ventilation openings might be
hindered, such as in a bookshelf or a drawer.
This product should be operated only from the type of power source indicated on the back
panel of the device. The power cord of this product should be restored in a place that is
less possibly be walked on or get pierced, especially its plug, convenience receptacles and
the point where power cord exit from the apparatus.
Before cleaning this product, make sure the plug is disconnected from the outlet.
Proceed with the cleaning in the way that this instruction recommends only.
When this product is not in use for a long time, make sure to unplug the power cord from
the AC outlet.
If below problem happens, send this product to a qualified service personnel for repairing.
A. Power cord or power plug is damaged.
B. Objects have fallen or liquid has been spilled into this product.
C. This product is exposed to rain or other liquid.
D. This product functions abnormally or very poorly.
E. This product has been dropped or has a damaged enclosure.
Never to attempt to repair this product by yourself. Refer all servicing to a qualified servicing
personnel.
CAUTION
To reduce the risk of electric shock, the power plug must be completely inserted into an AC
outlet.
This product does not contain any parts or components that can be repaired by users
themselves. Do not open the enclosure, otherwise it may result in an electric shock. Refer
all servicing to a qualified servicing personnel.
When you unplug this product from AC outlet, do hold the power plug and pull.
Do not pull the power cord. Do not overload AC outlets or the extension cord, as this can
lead to risk of fire or electric shock.
Warning
Specifications
Model
HiVi M300
Series
Professional DSP 2.0 multimedia speaker system
System Type
2-way 4th-order vented box system
Drivers Configuration
Professional 6.5" midbass driver; 1.1" dome tweeter
Before connecting this product with AC outlet, do check and make sure the electric supply
voltage is as same as it is marked on the rear panel of this product.
Frequency Range
38Hz - 20kHz ±3dB(Free Space)
WARNING: It's very dangerous to insert a power plug that has bare wire into an AC
Harmonic Distortion
65Hz - 20kHz ≤1% (85dB/1m)
outlet.
Audio Input
AUX/Bluetooth/Optical/Coaxial
Rated Power
120W RMS/Channel ; 240W RMS/Dual Channels
Crossover Point
3.0kHz
Separation
>65dB
SNR
>95dB (Unweighted)
Input Sensitivity
350mV
Input Impedance
22kΩ
Maximum Input
3000mV
Finish
Black matte cabinet with PVC coated side panels
Dimensions(WXDXH)
8.9"×10.3"×15.8"
Net Weight
Master Speaker:27.1lbs
When repairing or replacement of parts is required, make sure the service technician has
used the parts/components specified by the manufacturer or parts/components that have
the same characteristics as the original parts/components. Unauthorized
substitutions may result in risk of fire, electric shock or other hazards.
POWER SOURCE
DECLARATION
This product does not contain any parts or components that can be repaired by
users themselves. If there is any malfunction, refer to this instruction or ask for
repair by a qualified service technician. Do not try to repair by yourself, otherwise
the manufacturer will not be responsible for any consequences resulted there from.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Break-in
Break-in is the procedure which can enable the speakers to perform best acoustically. A
period ranging from 48-100 hours of usage is recommended before both the amplifier and
speaker drivers behave optimally.
Alternatively, you can listen 2 or 3 hours every day at a medium volume, and the speakers
will be broken-in one month or so.
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Slave Speaker:18.3lbs
Bluebooth Connection
Unpacking & Schematic Diagram
Select Bluebooth mode via a remote control or press INPUT/VOLUME control on the front
panel. Indicator light should flash blue. Choose HiVi M300.
Steady blue light indicates successful Bluetooth connection.
Please make sure all the following components are in the box.
POWER
MUTE
BT
AUX
OPT
COAX
POWER
VOLUME
MUTE
BT
AUX
OPT
COAX
INPUT / VOLUME
TREBLE
TREBLE
BASS
BASS
INPUT / VOLUME
INPUT / VOLUME
Speaker Placement
x1
x1
x1
10
x1
11
WALL
STAND / DESK
Slave
speaker
d>70mm
Master
speaker
d>30mm
POWER
MUTE
12
13
BT
AUX
OPT
COAX
14
15
16
60mm100mm
TREBLE
BASS
17
INPUT / VOLUME
VOLUME
18
Manual
19
Unpacking & Schematic Diagram
Speaker Connection
Multimedia Active Speaker
Model: HiVi M300
Power: 220-240V~ 50/60Hz 268W
AUX
Designed by HiVi Acoustics, Inc.
Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road, Liangang
20
Industrial Zone, Zhuhai, Guangdong, P.R.China
21
CAUTION
COAXIAL
22
ELECTRIC SHOCK HAZARD, DO NOT OPEN.
KEEP AWAY WATER OR MOISTURE.
OPTICAL
SERVICEABLE PARTS FROM INSIDE REFER
Speaker In
Speaker Out
SERVICING TO QUALIFIED TECHNICIANS.
SPEAKER IN
Importer Name: xxxxxxxxxxxxxxxxxxxxxxxxxx
110V~ 60Hz IN T5AL250V
Importer Address: xxxxxxxxxxxxxxxxxxxxxxxx
Avoid magnets.
FCC ID: XXXXXXXX
Made in China
Master Speaker
Do not touch the drivers with hands.
Slave Speaker
Avoid corrosive liquids and gases.
Do not place it in high temperature, humidity and environment with great
temperature and humidity change for an extended period of time.
110V~ 60Hz
23
ON
24
OFF
25
POWER
110V~ 60Hz IN T5AL250V
SPEAKER IN
26
LEFT OUT
Mobile Phone
Multimedia Active Speaker
Model: HiVi M300
Router
AUX
Power: 220-240V~ 50/60Hz 268W
Designed by HiVi Acoustics, Inc.
Zhuhai HiVi Technology co., Ltd.
NO.1, South Dongcheng Road, Liangang
1. Treble Control: ±3dB; clockwise +3dB, counterclockwise -3dB
2. Bass Control: ±3dB ; clockwise +3dB, counterclockwise -3dB
3. Volume/Source Control: Turn clockwise to increase the volume.
Press repeatedly to cycle through the available modes (AUX, Bluetooth, …)
4. Tweeter
5. Woofer
6. Receiver
7. Indicator Light
Industrial Zone, Zhuhai, Guangdong, P.R.China
Ipad
CAUTION
COAXIAL
ELECTRIC SHOCK HAZARD, DO NOT OPEN.
KEEP AWAY WATER OR MOISTURE.
OPTICAL
SERVICEABLE PARTS FROM INSIDE REFER
SERVICING TO QUALIFIED TECHNICIANS.
Importer Name: xxxxxxxxxxxxxxxxxxxxxxxxxx
Computer
Importer Address: xxxxxxxxxxxxxxxxxxxxxxxx
CD/DVD/TV
Avoid magnets.
FCC ID: XXXXXXXX
Made in China
Do not touch the drivers with hands.
8. Power Cable
10. Optical Cable
9. Dual RCA to 3.5mm Audio Cable
11. Speaker Connecting Cable
12. Power
14. Bluetooth Input (Blue Light)
16. Optical Input (White Light)
18. Volume Down
13. Mute (Red Light)
15. Aux Input (Sky Blue Light)
17. Coaxial Input(Purple Light)
19. Volume Up
20. Aux Interface
22. Optical Interface
24. Power Socket
27. Speaker In
21. Coaxial Interface
23. Power Switch
26. LEFT Out
Avoid corrosive liquids and gases.
Do not place it in high temperature, humidity and environment with great
temperature and humidity change for an extended period of time.
TV
ON
OFF
POWER
110V~ 60Hz IN T5AL250V
LEFT OUT
a) Connection between speakers.
b) Speaker connection with power.
c) Speaker connection with computers, TV and tablets etc.
d) Speaker connection with router.
e) Optical connection with CD/DVD/TV.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Create Date                     : 2018:04:04 15:19:20+08:00
Modify Date                     : 2018:04:04 15:19:20+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : Administrator
Creator                         : CorelDRAW
Title                           : M300英文说明书(A版)

EXIF Metadata provided by EXIF.tools