dormakaba Canada LPR10M Proximity Reader User Manual LEGIC Installation Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	361155
Application ID	d38eGgb75ZrHOzmWld7kXA==
Document Description	LEGIC Installation Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.35kB (79408 bits)
Date Submitted	2003-09-30 00:00:00
Date Available	2003-09-29 00:00:00
Creation Date	2003-09-30 10:50:17
Producing Software	Mac OS X 10.2.6 Quartz PDFContext
Document Lastmod	2003-09-30 11:24:53
Document Title	LEGIC Installation Manual Part 1
Document Creator	Word

Installation Sheet:
LEGIC Proximity Reader (LPR-10M)
Introduction & Preparation
Requirements
• Millenium DCD circuit board with an EPROM issue level “Y” or
higher (a paper label on the DCD EPROM chip identifies the
issue level).
• Millenium software release 3.0 or higher.
Mullion Mount
LPR-10M Price List
120-510520
Mullion Mount Reader unit Kit with:
009-510655-2
1 spacer
890-510752
2 screws for steel, concrete or drywall
999-510754
2 concrete screw anchors (white)
999-510753
2 drywall nylon grip plugs
009-510655-3
Self-adhesive fascia with foil LED
009-510655-4
Self-adhesive fascia with foil logo
• Mullion having a minimum width of 1.80”.
• External dimensions:
Height:
3 _ ” (90 mm)
Width:
1 _ ” (46 mm)
Projection:
_ ” (21 mm)
• 3/4” hole drilled in the mullion front face for passing the reader
cable.
• Two other holes must also be drilled – see Table 1 below for
dimensions of holes according to material to be drilled.
• Two # 4 – 1 _” (32 mm) Phillips pan zinc plated screws supplied with
the reader kit.
• Millenium DCD circuit board with an EPROM issue level “Y” or
higher. (A paper label on the DCD EPROM chip identifies the issue
level)
• Millenium software release 3.0 or higher.
Installation
1. Drill one _” (21 mm) hole for passing the reader cable through.
1. Drill two holes for fixing the reader to the surface (see Table below
for dimensions of hole appropriate for type of surface material).
1. Affix the reader using the two # 4 – 1 _” (32 mm) Phillips pan zinc
plated screws supplied with the reader kit.
1. An installation diagram (Figure 1) is in the left-hand column of this
sheet.
Table 1
Surface Material
Diameter of “A”
Holes
Plugs
Metal
5/64” (2 mm)
N/A
Concrete
3/16” (4 mm)
concrete screw anchors
Drywall
3/16” (4 mm)
drywall nylon grip plugs
Figure 1: Installation Diagram
PK2963 02/03 Issue 1
2 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2003:09:30 11:24:53-03:00
Create Date                     : 2003:09:30 10:50:17-03:00
Creator                         : Word
Producer                        : Mac OS X 10.2.6 Quartz PDFContext
Page Count                      : 1
Mod Date                        : 2003:09:30 11:24:53-03:00
Creation Date                   : 2003:09:30 10:50:17-03:00
Metadata Date                   : 2003:09:30 11:24:53-03:00

EXIF Metadata provided by EXIF.tools