dormakaba Canada LPR10M Proximity Reader User Manual LEGIC Installation Manual Part 1

Kaba Ilco Inc. Proximity Reader LEGIC Installation Manual Part 1

LEGIC Installation Manual Part 1

PK2963 02/03 Issue 1 2 of 4Installation Sheet: LEGIC Proximity Reader (LPR-10M)Introduction & Preparation Requirements• Millenium DCD circuit board with an EPROM issue level “Y” orhigher (a paper label on the DCD EPROM chip identifies theissue level).• Millenium software release 3.0 or higher.Mullion Mount• Mullion having a minimum width of 1.80”.• External dimensions:Height: 3 _ ” (90 mm)Width: 1 _ ” (46 mm)Projection: _ ” (21 mm)• 3/4” hole drilled in the mullion front face for passing the readercable.• Two other holes must also be drilled – see Table 1 below fordimensions of holes according to material to be drilled.• Two # 4 – 1 _” (32 mm) Phillips pan zinc plated screws supplied withthe reader kit.• Millenium DCD circuit board with an EPROM issue level “Y” orhigher. (A paper label on the DCD EPROM chip identifies the issuelevel)• Millenium software release 3.0 or higher.Installation1. Drill one _” (21 mm) hole for passing the reader cable through.1. Drill two holes for fixing the reader to the surface (see Table belowfor dimensions of hole appropriate for type of surface material).1. Affix the reader using the two # 4 – 1 _” (32 mm) Phillips pan zincplated screws supplied with the reader kit.1. An installation diagram (Figure 1) is in the left-hand column of thissheet.Table 1Surface MaterialDiameter of “A”HolesPlugsMetal5/64” (2 mm)N/AConcrete3/16” (4 mm)concrete screw anchorsDrywall3/16” (4 mm)drywall nylon grip plugsLPR-10M Price List120-510520 Mullion Mount Reader unit Kit with:009-510655-2 1 spacer890-510752 2 screws for steel, concrete or drywall999-510754 2 concrete screw anchors (white)999-510753 2 drywall nylon grip plugs009-510655-3 Self-adhesive fascia with foil LED009-510655-4 Self-adhesive fascia with foil logoFigure 1: Installation Diagram

Navigation menu