eInstruction BTCOM BT-Com User Manual InstallingBTCom

eInstruction Corporation BT-Com InstallingBTCom

manual

BT-ComThe BT-Com converts InterWrite electronic whiteboards to wirelessoperation. Using BluetoothTM wireless technology, the BT-Com elimi-nates the need for a physical serial or USB connection from yourInterWrite whiteboard to your PC. With the BT-Com in place, yourInterWrite whiteboard can communicate wirelessly with the BluetoothUSB (desktop) or PCMCIA (laptop) hub on your computer.The BT-Com consistsof two pieces:- 1 - BT-Com37-00730-01WhiteboardClipPosition the clip on the back ofthe whiteboard at the upperright corner. Press firmly toaffix the adhesive strip to theback of the whiteboard.44444Paper StripRemove the paper coveringthe adhesive strip on the clip.33333Power off the whiteboardby toggling the powerswitch on the lower rightside of the whiteboard.11111PowerSwitchSerialPortUSBPortIf necessary, remove theserial or USB connectorfrom the whiteboard.22222The BTBTBTBTBT-Com-Com-Com-Com-Com unit withan RJ12 connectorThe clipclipclipclipclip, which attachesthe BT-Com to thewhiteboardWith the logo facing you, insertthe BT-Com into the cradle onthe clip.55555Installation
If you haven’t already done so, install the InterWrite software on your PC so you can enjoy theconvenience of the Bluetooth wireless technology when operating your InterWrite whiteboard.Note: The BT-Com swivels in the clip cradle. Inmost installations, the optimal orientation of theBT-Com is standing up in the cradle. However, ifyou are experiencing reception problems, tryrotating the BT-Com through the 90° arc to seeif a different orientation improves reception.- 2 - BT-Com37-00730-01* If your whiteboard does not have an RJ12 port, please contactRJ12 ConnectorRJ12 Port Plug the end of the connectorinto the port (it looks like aphone jack)* on the back ofthe whiteboard.66666Power on the whiteboard. Youwill hear four beeps that indicatethe power is on, followed by twobeeps when the whiteboard hasrecognized the BT-Com.77777PowerSwitch
Regulatory StatementsThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Reorient or coil the cables.If necessary, consult the dealer, or an experienced radio/television technician foradditional suggestions.- 3 - BT-Com37-00730-01 CanadaIndustry Canada Class B emission compliance statementThis Class B digital apparatus complies with Canadian ICES-003.Avis de conformité á la réglementation d’Industrie CanadaCet appareil numérique de classe B est conforme á la norme NMB-003 du Canada.CautionAny cables the user adds to the device must be shielded to be in compliance with theFCC standards. Any unauthorized modification to this device could result in therevocation of the end user’s authority to operate this device.This device complies with Part 15 of FCC rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that maycause undesired operation.
- 4 - BT-Com37-00730-01European Union – Emission DirectiveThis product is in conformity with the protection requirements of EU Council Directive89/366/ECC on the approximation of the laws of the Member States relating toelectromagnetic compatibility.This product has been tested and found to comply with the limits for Class B InformationTechnology Equipment according to CISPR 22/European Standard EN55022. The limitsfor Class B equipment were derived for typical industrial environments to providereasonable protection against interference with licensed communication devices.Supplementary InformationThe product herewith complies with the requirements of the EMC Directive 89/336/EEC.Scottsdale, Arizona, U.S.A. 11/15/2002 Dana DoubravaLocation Date Hardware Engineering ManagerEuropean ContactGTCO CalCompWorld Trade CenterA-1300 Vienna — AirportAustriaTel: + 43 1 7007 36450Fax: + 43 1 7007 36458conforms to the following product specifications:Safety: Not applicable to any standardEMC: ETSI EN 301 489-1/2000CISPR 22:1997-Class BEN55022:1988-Class BEN 61000-4-2/1995EN 61000-4-3/1995EN 61000-4-4/1995CE Certification for the BT-ComDeclaration of conformity according to ISO/IEC Guide 22 and EN 45014:Manufacturer’s Name: GTCO CalComp, Inc.Manufacturer’s Address: 14555 N. 82nd StreetScottsdale, Arizona 85260U.S.A.declares, that the productProduct Name: BT-ComModel Numbers: BT-ComProduct Options: AllEN 61000-4-5/1995EN 61000-4-6/1996EN 61000-4-11/1994EN 61000-3-2/1995 Class BEN 61000-3-3/1995

Navigation menu