eInstruction BTCOM BT-Com User Manual InstallingBTCom
eInstruction Corporation BT-Com InstallingBTCom
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 285980 |
| Application ID | gNqEOht+ZviWZgSIH7BBSg== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 4.46kB (55811 bits) |
| Date Submitted | 2002-11-26 00:00:00 |
| Date Available | 2002-11-26 00:00:00 |
| Creation Date | 2002-11-15 15:21:08 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2002-11-15 15:21:10 |
| Document Title | InstallingBTCom |
| Document Creator | Adobe PageMaker 7.0 |
| Document Author: | SLIBERTY |
BT-Com The BT-Com converts InterWrite electronic whiteboards to wireless operation. Using BluetoothTM wireless technology, the BT-Com eliminates the need for a physical serial or USB connection from your InterWrite whiteboard to your PC. With the BT-Com in place, your InterWrite whiteboard can communicate wirelessly with the Bluetooth USB (desktop) or PCMCIA (laptop) hub on your computer. The BT-Com consists of two pieces: The clip clip, which attaches the BT-Com to the whiteboard -Com unit with The BT BT-Com an RJ12 connector Installation Power off the whiteboard by toggling the power switch on the lower right side of the whiteboard. If necessary, remove the serial or USB connector from the whiteboard. Power Switch Serial Port USB Port Paper Strip Remove the paper covering the adhesive strip on the clip. Clip Whiteboard Position the clip on the back of the whiteboard at the upper right corner. Press firmly to affix the adhesive strip to the back of the whiteboard. With the logo facing you, insert the BT-Com into the cradle on the clip. -1- BT-Com 37-00730-01 RJ12 Connector RJ12 Port Plug the end of the connector into the port (it looks like a phone jack)* on the back of the whiteboard. Power Switch Power on the whiteboard. You will hear four beeps that indicate the power is on, followed by two beeps when the whiteboard has recognized the BT-Com. If you haven’t already done so, install the InterWrite software on your PC so you can enjoy the convenience of the Bluetooth wireless technology when operating your InterWrite whiteboard. Note: The BT-Com swivels in the clip cradle. In most installations, the optimal orientation of the BT-Com is standing up in the cradle. However, if you are experiencing reception problems, try rotating the BT-Com through the 90° arc to see if a different orientation improves reception. * If your whiteboard does not have an RJ12 port, please contact -2- BT-Com 37-00730-01 Regulatory Statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Reorient or coil the cables. If necessary, consult the dealer, or an experienced radio/television technician for additional suggestions. Caution Any cables the user adds to the device must be shielded to be in compliance with the FCC standards. Any unauthorized modification to this device could result in the revocation of the end user’s authority to operate this device. This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Canada Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformité á la réglementation d’Industrie Canada Cet appareil numérique de classe B est conforme á la norme NMB-003 du Canada. -3- BT-Com 37-00730-01 CE Certification for the BT-Com Declaration of conformity according to ISO/IEC Guide 22 and EN 45014: Manufacturer’s Name: Manufacturer’s Address: declares, that the product Product Name: Model Numbers: Product Options: GTCO CalComp, Inc. 14555 N. 82nd Street Scottsdale, Arizona 85260 U.S.A. BT-Com BT-Com All conforms to the following product specifications: Safety: Not applicable to any standard EMC: ETSI EN 301 489-1/2000 CISPR 22:1997-Class B EN 61000-4-5/1995 EN55022:1988-Class B EN 61000-4-6/1996 EN 61000-4-2/1995 EN 61000-4-11/1994 EN 61000-4-3/1995 EN 61000-3-2/1995 Class B EN 61000-4-4/1995 EN 61000-3-3/1995 Supplementary Information The product herewith complies with the requirements of the EMC Directive 89/336/EEC. Scottsdale, Arizona, U.S.A. 11/15/2002 Location Date Dana Doubrava Hardware Engineering Manager European Contact GTCO CalComp World Trade Center A-1300 Vienna — Airport Austria Tel: + 43 1 7007 36450 Fax: + 43 1 7007 36458 European Union – Emission Directive This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility. This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22/European Standard EN55022. The limits for Class B equipment were derived for typical industrial environments to provide reasonable protection against interference with licensed communication devices. -4- BT-Com 37-00730-01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2002:11:15 15:21:08 Producer : Acrobat Distiller 4.0 for Windows Title : InstallingBTCom Subject : InstallingBTCom Author : SLIBERTY Creator : Adobe PageMaker 7.0 Modify Date : 2002:11:15 15:21:10-07:00 Page Count : 4EXIF Metadata provided by EXIF.tools