eInstruction R2 Response Receiver User Manual InterWrite Whiteboards GS A
eInstruction Corporation Response Receiver InterWrite Whiteboards GS A
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 830941 |
| Application ID | InF9XlZBr/7n8l7U0m2crQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.1kB (563703 bits) |
| Date Submitted | 2007-08-20 00:00:00 |
| Date Available | 2007-08-20 00:00:00 |
| Creation Date | 2007-06-07 07:44:55 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2007-06-07 07:44:58 |
| Document Title | InterWrite Whiteboards GS_A |
| Document Creator | Adobe PageMaker 7.0 |
| Document Author: | susan liberty |
Interwrite TM Maestro User’s Guide Basic Operating Instructions 1 Enable your Maestro by starting up Interwrite PRS and selecting the RF, Enable Master Clicker menu option. Click on the Enable Master Clicker checkbox and enter the Radio ID found on the back of your Maestro in the Master Clicker ID text box. Turn on Maestro. The green Connect LED will blink fast, indicating the Maestro is ready to join the Class. 3 Connect to the Class by pressing the two-character code displayed by the Interwrite PRS software. LED will blink slowly as long as the Maestro is connected to The the Class. 4 Press a Maestro Command button (see chart below). LED will be green if command was received. LED will be red if command was not received. 5 Hold down the button until the LED goes off. Maestro Button Commands Start a new Session This applies only to a PRS Lesson Session. Start Question Timer Pause Question Timer Resume Question Timer This applies only to PRS Lesson Sessions. F5 Function Key End Session End Question This is the Function Key used to start a PowerPoint Slide Show. This is the equivalent of clicking on the End Session button to end a PRS Session, or the End Question button to end a PRS PowerPoint Question Slide. Stop Question Timer Issue the ESCape command Go back to the Previous Question Advance to the Next Question Page Up Page Down This can be used only during a PRS Lesson Session. This can be used only during a PRS Lesson Session. This is used during a PowerPoint Session to go to the previous slide. This is used during a PowerPoint Session to go to the next slide. Issue the Tab command Issue the Enter command This command is used to process the OK and default buttons on dialogs. Limited Warranty for Interwrite Maestro Interwrite Learning warrants this product to be free from defects in material and workmanship under the following terms. Coverage Parts and labor are warranted for one (1) year from the date of the first consumer purchase of the Interwrite Maestro. Technical Support Web-based Technical Support is available free of charge at: www.interwritelearning.com/support, for technical support, Flash tutorials, troubleshooting, Technical Bulletins, and FAQs can be found. Declaration of Conformity The “CE” mark on this device indicates compliance under the EMC 89//336/EEC Directive. Declaration of conformity according to ISO/IEC Guide 22 and EN 45014 conforms to the following product specifications: Manufacturer’s Name: GTCO Corp. (dba Interwrite Learning) EMC: EMC Directive 89/336/EEC and Manufacturer’s Address: 7125 Riverwood Drive amendment 92/31/EEC Columbia, MD 21046 Emissions EN 55022:2003 Class B U.S.A. Testing EN 55024:2003 and Low Voltage Directive 73/23/EEC declares, that the product Dana Doubrava, Engineering Mgr, Product Name: Interwrite Maestro Scottsdale, Arizona, U.S.A., 6.1.2007 Model Number: R2 European Union Emission Directive This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility. This European Contact product has been tested and found to comply with the limits for Interwrite Learning Class B Information Technology Equipment according to CISPR 22/ A Division of European Standard EN55022. The limits for Class B equipment were GTCO CalComp GmbH derived for typical industrial environments to provide reasonable Kreiller Strasse 24 protection against interference with licensed communication devices. 81673 Munich Canada Germany Tel: +49 (0) 89 370012-0 Industry Canada Class B emission compliance statement. This Class B Fax: +49 (0) 89 370012-12 digital apparatus complies with Canadian ICES-003. Avis de conformité á la réglementation d’Industrie Canada. Cet appareil numérique de classe B est conforme á la norme NMB-003 du Canada. Note: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced Radio/TV technician for help. This device complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The radiated output power is far below the FCC Radio Frequency exposure limits. Nevertheless, this device should be used in such a manner that the potential for human contact during normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. www.InterwriteLearning.com Support: 480.443.2214 36-01336-01/37-01176-01 Rev. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2007:06:07 07:44:55-07:00 Modify Date : 2007:06:07 07:44:58-07:00 Subject : InterWrite Whiteboards GS_A Page Count : 2 Creation Date : 2007:06:07 14:44:55Z Mod Date : 2007:06:07 14:44:55Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : susan liberty Keywords : Metadata Date : 2007:06:07 14:44:55Z Creator : susan liberty Title : InterWrite Whiteboards GS_A Description : InterWrite Whiteboards GS_AEXIF Metadata provided by EXIF.tools