eMoMo Technology REMO4 Remo4 Audio System User Manual Remo4 29V

eMoMo Technology Co., Ltd Remo4 Audio System Remo4 29V

Users manual

Safety WarningThank you for using our Remo1 Bluetooth sound system!Before using this unit please, read the manual.This audio system was for indoor use only.Do not place the apparatus in direct sunlight or heat.This apparatus should be placed on a stable surface.Trying to remove panels or repairing the unit by yourself could result in an electric shock.This item should be connected to an AC 100V-240V Power outlet.Do not use chemicals on this product.Do not press the buttons too hard, it may damage the product.Do not attempt to repair this product as the warranty will be void, please contact with the store or customer service.ProductNO.PARTS QTY.①②③④⑤⑥⑦⑧⑨⑩Speaker：3”4Ω10WC05 control boxThe extention cable of speaker：L=1000mmSwitch power supply: 29V 2ASpeaker inner grill for Screw：KA3*16mm，for ⑨Screw：PA3.5*15，for①Speaker grill for ⑨Speaker grill fixSpeaker grill fix cover for⑨2PCS1PCS4PCS1PCS2PCS8PCS8PCS2PCS2PCS2PCS①Basic operation1. Once power is supplied, the Remo4 bluetooth audio kit begins to search pairing device automatically. It keeps searching until it pairs with other device successfully. It could only pair with one bluetooth device. If you want to pair with another device, disconnect the paired one, then connect with the new one.2．The Remo4 Bluetooth audio kit could be controlled via the paired bluetooth. Previous track/ Next track, Increase volume/ Decrease volume, Pause / Play.3．Description of bluetooth：BT Speaker Remo44．Bluetooth reproduction rang: 8m.SpecificationOutput 10W*2Signal to noise ratioSpeakerBlutooth Edition≥68dB3"4Ω 10W2.4GFrequently Asked QustionsThe volume switch is on minimum;the unit is not set to the correct function;please contact with the store or customer service.Problem Possible cause and correction or maintenanceNo sound at allPlease close all other pairing machines and retry; Please wait a few seconds or restart the machine;Do not pair the devices behind a wall or in corner, please keep the working space within 8 meters;Pair the device named eMoMo. Bluetooth can not pair
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth foruncontrolled enviroment. This equipment should be installed and operated withminimum distance 20cm between the radiator and your body. .

Navigation menu