eMoMo Technology REMO4 Remo4 Audio System User Manual Remo4 29V

eMoMo Technology Co., Ltd Remo4 Audio System Remo4 29V

Users manual

Download: eMoMo Technology REMO4 Remo4 Audio System User Manual Remo4 29V
Mirror Download [FCC.gov]eMoMo Technology REMO4 Remo4 Audio System User Manual Remo4 29V
Document ID4089771
Application IDWD02AhVZvcfevdIXG9SGPA==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize41.83kB (522858 bits)
Date Submitted2018-11-29 00:00:00
Date Available2018-11-29 00:00:00
Creation Date2018-11-21 10:05:57
Producing SoftwareCorel PDF Engine Version 14.0.0.701
Document Lastmod2018-11-27 18:25:11
Document TitleRemo4-29V
Document CreatorCorelDRAW
Document Author: Administrator

Safety Warning
Basic operation
Thank you for using our Remo1 Bluetooth sound system!
1. Once power is supplied, the Remo4 bluetooth audio kit begins to search pairing device
Before using this unit please, read the manual.
automatically. It keeps searching until it pairs with other device successfully. It could
This audio system was for indoor use only.
only pair with one bluetooth device. If you want to pair with another device, disconnect
Do not place the apparatus in direct sunlight or heat.
the paired one, then connect with the new one.
This apparatus should be placed on a stable surface.
Do not attempt to repair this product as the warranty will be void, please contact with the store or customer service.
Trying to remove panels or repairing the unit by yourself could result in an electric shock.
2.The Remo4 Bluetooth audio kit could be controlled via the paired bluetooth.
Previous track/ Next track, Increase volume/ Decrease volume, Pause / Play.
This item should be connected to an AC 100V-240V Power outlet.
3.Description of bluetooth:BT Speaker Remo4
Do not use chemicals on this product.
4.Bluetooth reproduction rang: 8m.
Do not press the buttons too hard, it may damage the product.
Specification
Product
Output
10W*2
Signal to noise ratio
≥68dB
Speaker
3"4Ω 10W
Blutooth Edition
2.4G
Frequently Asked Qustions
Problem
No sound at all
Bluetooth can
not pair
NO.
PARTS
QTY.
①
Speaker:3”4Ω10W
2PCS
②
C05 control box
1PCS
③
The extention cable of speaker:L=1000mm
4PCS
④
Switch power supply: 29V 2A
1PCS
⑤
Speaker inner grill for ①
2PCS
⑥
Screw:KA3*16mm,for ⑨
8PCS
⑦
Screw:PA3.5*15,for①
8PCS
⑧
Speaker grill for ⑨
2PCS
⑨
Speaker grill fix
2PCS
⑩
Speaker grill fix cover for⑨
2PCS
Possible cause and correction or maintenance
The volume switch is on minimum;
the unit is not set to the correct function;
please contact with the store or customer service.
Please close all other pairing machines and retry;
Please wait a few seconds or restart the machine;
Do not pair the devices behind a wall or in corner, please
keep the working space within 8 meters;
Pair the device named eMoMo.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2018:11:21 10:05:57+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2018:11:27 18:25:11+08:00
Metadata Date                   : 2018:11:27 18:25:11+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Remo4-29V
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:5374fbd6-9a1b-4ce6-b511-d95203d7911f
Instance ID                     : uuid:ee9696ac-be26-47f5-8935-6b8b8c6170b9
Page Count                      : 2
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A4E-REMO4

Navigation menu