eSky wireless ES620 GPS Tracker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2947245
Application ID	OULoSLys23y8s3djvuUQEg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.9kB (661296 bits)
Date Submitted	2016-03-31 00:00:00
Date Available	2016-03-31 00:00:00
Creation Date	2016-03-30 20:03:38
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2016-03-30 20:03:38
Document Title	Microsoft Word - ES620user manual_en__20160330.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	wuhongfei

Suzhou eSkywireless Inc.
ES620 user manual
ES620 user manual
Suzhou eSkywireless Inc.
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
Information to User
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF warning
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency(RF) energy set by the Federal Communications Commission of the U.S. Government.
For body worn operation, this device was tested for compliance with the applicable FCC specific
absorption rate (SAR) limits for radio frequency (RF) exposure during body‐worn operations. To
ensure that RF exposure levels remain at or below the tested levels, use a belt‐clip, holster, or similar
accessory between your body and the device. Such accessories should not contain any metallic
components. Body‐worn accessories that do not meet these specifications may not ensure
compliance with applicable SAR limits and their use should be avoided.
http://www.eskywireless.com
Suzhou eSkywireless Inc.
1 PREPARE before INSATLLATION
ES620 user manual
1.1 Product Display
（image of ES620）
1.2Packaging Inspection
Open the box, check the terminal model is correct and the accessories are complete. Otherwise,
please contact your dealer.
1.3Install SIM Card
1.3.1
Selection of SIM Card
The ES620 is a GPS/GPRS terminal, and it needs a GSM/GPRS SIM card. please reference dealer’s
opinion to select carrier.
1.3.2
Installation SIM card
Open the terminal cover, and put the metal side of SIM card face down and then fasten the card slot
cover.
1.4Power On
The terminal standard power supply is 3.7V‐4.2V. The red light is the power light, orange light is GSM
signal, a green light is GPS signals.
Note: Equipment working temperature is ‐20℃ to 65℃。
http://www.eskywireless.com
Suzhou eSkywireless Inc.
2 Steps of AT Setting before tests
ES620 user manual
Start hyper-terminal connection as follows.
1)select the comm port of PC through which ES620 is connected with PC, as the follows
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
2) In Port Settings, change communication speed (bits per second) to 115200bps,
3)Final step is the certain AT settings necessary after 1st running of downloaded program.
3.1) Start connection first
3.2) Restart ES620
3.3) After you see the "IIII"as the following picture, start setting.
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
3 INSTALL and OPERATION
3.1 Installation Method
The terminal is GPS positioning products, it is recommended that you follow the instructions to
install.
Note:
1) The following installation order, please do not inverted.
2) During the installation process, please do not supply the terminal.
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
①Charging line.
②charging plug.
3.1.1 Installation
The equipment can be placed in any position.
① The equipment can be in your hands.
② Equipment can be placed in the position of any car(such as under the dashboard, windshield,
feet, etc.)
③ The equipment can be in any package
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
3.2 Installation Notes
① Avoid put together with the emission source, for example, reversing radar, anti‐theft devices
and other on‐board communications equipment.
② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double‐
faced adhesive.
③ The terminal has GSM antenna and GPS antenna，so the installation should ensure that the
ES620face up (that is GPS toward the sky). Besides, there is no on‐metallic object that obscures
above the terminal.
④ If your device is in the metal mask, GPS receiving signal will be weakened, and it may cause GPS
work abnormal. So please change the location you installed the terminal. 、
http://www.eskywireless.com
Suzhou eSkywireless Inc.
4.SOS Introduction
ES620 user manual
SOS can make an SOS call or SMS message to a pre‐configured phone.
1).SOS message: When press the SOS button, if the device positioning by GPS, the equipment will
receive GPS information; If the device can’t positioning by GPS, the equipment will receive the base
station information;
2).SOS call: When press the SOS button, the device will connect the specified number. During the call,
please held the equipment close to ear (the usage is similar with mobile phone).
http://www.eskywireless.com
Suzhou eSkywireless Inc.
ES620 user manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
http://www.eskywireless.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : wuhongfei
Create Date                     : 2016:03:30 20:03:38+08:00
Modify Date                     : 2016:03:30 20:03:38+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - ES620user manual_en__20160330.docx
Creator                         : wuhongfei
Document ID                     : uuid:ee45391b-cdbd-4d72-b6f4-91d1284ae26e
Instance ID                     : uuid:5568df26-9716-46d3-85c8-96e765c97e88
Page Count                      : 10

EXIF Metadata provided by EXIF.tools