iControl Networks CH1000 Icontrol One Link User Manual QIG NA301P draft V1 1 0416

Download:
Mirror Download [FCC.gov]
Document ID	2691620
Application ID	SJPha1nypBfzj2KjPuSyNg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.9kB (223708 bits)
Date Submitted	2015-07-24 00:00:00
Date Available	2015-07-24 00:00:00
Creation Date	2015-06-26 17:28:31
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-06-26 17:28:31
Document Title	QIG_NA301P_draft_V1.1_0416
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	02113

Icontrol One Link
CH-1000
User Guide
Table of Contents
CHAPTER 1 INTRODUCTION ......................................................................................... 1
Package Contents.......................................................................................................... 1
Features......................................................................................................................... 1
LEDs ............................................................................................................................. 2
CHAPTER 2 INITIAL INSTALLATION........................................................................... 4
Requirements ................................................................................................................ 4
Procedure ...................................................................................................................... 4
APPENDIX A SPECIFICATION ........................................................................................ 5
Icontrol One Link ......................................................................................................... 5
Regulatory Approvals................................................................................................... 5
Copyright © 2015. All Rights Reserved.
Document Version: 1.1
All trademarks and trade names are the properties of their respective owners.
ii
Chapter 1
Introduction
This Chapter provides an overview of the Icontrol One Link's features and
capabilities.
Congratulations on the purchase of your new Icontrol One Link. This device is a primary
controller and gateway, which includes Wi-Fi and Z-Wave home automation radios, providing connectivity to security systems and devices (including cameras and sensors).
Package Contents
The following items should be included:
•
The Icontrol One Link Unit x 1
•
Ethernet Cable x 1
•
Quick Installation Guide
If any of the above items are damaged or missing, please contact your dealer immediately.
Features
•
MT7620A processor with128MB Flash and 128MB SDRAM
•
One Ethernet port with RJ45 connector
•
Front panel LEDs
•
Z-Wave transceiver
•
WPS button
•
Reset button
•
AC power plug (US)
•
Internal antenna for Wi-Fi and Z-Wave
LEDs
Top-mounted LEDs
The Icontrol One Link has four LEDs.
Service
Wi-Fi
Z-Wave
POWER
•
On (Green) - The CPE device is activated in iControl network.
•
Off - The CPE device is not activated in iControl network.
•
Flashing - The CPE device can not communicated with iControl
network.
•
On - Wi-Fi device attached.
•
Off - Wi-Fi connection is not available or no Wi-Fi device attached.
•
Flashing - WPS function is activated.
•
On (Green) - Z-Wave devices attached.
•
Off - Z-Wave function disabled, or no Z-Wave devices attached.
•
Flashing - Learn/exclusion/inclusion mode on.
•
On (Green) - Power On/Normal operation
•
Off - Power Off
•
Flashing - Booting or Firmware upgrade.
Rear/Side Panel
WPS Button
Use a clip to press the WPS button on the device and on your other
wireless device to perform WPS function that easily creates an encryption-secured
wireless connection automatically.
RESET
This button has two (2) functions:
•
Reboot. When pressed and released, the Icontrol One Link will
reboot (restart).
•
Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power On.
2. Use a clip to press the Reset button and keep holding for 15
seconds.
3. Release the Reset Button. The Icontrol One Link is now using the
factory default values.
ETHERNET
Port
Ethernet Activity/Link LED
Use standard LAN cable (RJ45 connector) to connect your router to the
port.
•
On - Ethernet connection established, but the connection is idle.
•
Off - Ethernet connection is not available.
•
Blink - Data is being transmitted or received via Ethernet connection.
Chapter 2
Initial Installation
This Chapter covers the installation of the Icontrol One Link.
Requirements
•
Use a standard 10/100BaseT network (UTP) cable with RJ45 connector.
Procedure
1. Choose an Installation Site
Select a suitable place to install the Icontrol One Link.
2. Connect LAN Cable
Use standard LAN cable to connect the router and the Ethernet port on the Icontrol One
Link.
4. Power Up
Plug the Icontrol One Link into an outlet or extension cord.
5. Check the LEDs
•
The POWER LED should be ON.
•
The Service LED should be ON.
6. Connect Other Devices
Use the Icontrol One Link as a network coordinator to connect certified Z-Wave sensors
and home surveillance devices.
Appendix A
Specification
Icontrol One Link
Model
CH-1000
Dimensions
97mm(W) * 60mm(D) * 40mm(H) (without plug)
Operating Temperature
0° C to 40° C
Storage Temperature
-20° C to 70° C
Network Protocol
TCP/IP
Network Interface
1 * 10/100BaseT (RJ45) WAN Port
LEDs
LAN LEDs
Antenna
2 * Wi-Fi Internal Antennas
1 * Z-Wave Internal Antenna
Power Adapter
AC Input 120V with US Plug
Regulatory Approvals
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral
devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 02113
Create Date                     : 2015:06:26 17:28:31+08:00
Modify Date                     : 2015:06:26 17:28:31+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : pdfFactory Pro www.pdffactory.com
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : 02113
Title                           : QIG_NA301P_draft_V1.1_0416
Document ID                     : uuid:8d60ed0b-9df8-4a7c-9922-bd8812c378eb
Instance ID                     : uuid:609f5ac2-bdb5-4be5-b2ea-efe9b347b94b
Page Count                      : 8

EXIF Metadata provided by EXIF.tools