iLuv Creative Technology AUDCLICK Wi-Fi&Bluetooth; Speaker User Manual Audclick QSG 072516

Download:
Mirror Download [FCC.gov]
Document ID	3169501
Application ID	OX/m4XsZyw4GkLGaJPlnjw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.98kB (1399698 bits)
Date Submitted	2016-10-20 00:00:00
Date Available	2016-10-20 00:00:00
Creation Date	2016-08-02 11:07:45
Producing Software	Adobe PDF library 9.90
Document Lastmod	2016-09-28 10:10:27
Document Title	Audclick_QSG_072516
Document Creator	Adobe Illustrator CS5

Quick Start Guide
THE AUD CLICK IS DESIGNED FOR HOME USE WI-FI CONNECTIVITY AND
WILL NOT FUNCTION PROPERLY WITHIN AN OFFICE ENVIRONMENT
WHERE WI-FI PROTECTIVE FIREWALLS ARE OPERATING.
WHAT’S INCLUDED
CONTROLS
Aud Click Main Unit
Top button
Press the top
button to
play/pause music
Volume control
Turn clockwise to
raise volume.
Turn counter clockwise
to lower volume.
Bottom button
LED indicator
POWERING UP
SETTING UP
White LED
WiFi is connected
1. Download the Aud Click APP
to your smartphone (available in the apple
or android app stores)
To power on, press and hold the
WPS (WiFi protected setup) button,
located at the bottom of the unit
for 2 seconds. Once on, wait a few
seconds for unit to start up and Aud
Click will default into WiFi mode.
LED will flash white until
connected. Once WiFi is successfully set up, LED will not flash but
will light up white.
Flashing white LED
WiFi is not connected
2. Follow the procedure on the app
to setup Aud Click
3. On the app, go to Amazon and input
your Amazon account info to set up Alexa.
After set up, Aud Click can run by itself without APP.
WIFI OPERATION
BLUETOOTH PAIRING (MANUALLY)
1. Power on the unit, and double click the top ring.
LED indicator will change to blue indicating that
1. Power on the unit. Unit should be under WiFi mode
and white LED will stay on.
2. Press and hold the top ring for 2 seconds, until you can hear
prompting tone and white LED is flashing. Then, you can
command Aud Click to operate by pressing top button
and using voice command.
the Aud Click is in Bluetooth mode.
2. Press the WPS button, located at the bottom of the unit once.
Aud Click will go into Bluetooth pairing mode and LED indicator
will flash blue.
3. On your smartphone or tablet turn on Bluetooth and then select
"iLuv AudClick". Once Bluetooth is connected,
Below is some example:
Blue LED will stop flashing and stay on.
4. Press the top ring to play/pause music.
• Play Music - Click and Say “Play music on iTunes Radio”
Turn the silver ring clockwise to raise the volume,
• Weather - Click and Say "What's the weather in New York?"
and counter-clockwise to lower the volume.
• Spelling - Click and Say "How do you spell Apple?"
5. Double click the top ring to switch back to WiFi mode.
BATTERY CHARGING
RESET THE UNIT
Flasinhg Red Indicator
Time to charge
1. If battery is low, the LED indicator will flash red.
Voice promptwill tell you that battery is low and
Voice Prompt
“Battery is low”
USB charging cable
DC 5V, 1A output
White LED
Fully charged
RESET
it is time to charge the Aud Click.
2. Using the included USB charging cable,
connect one side to your PC or smartphone's USB port
(DC 5V, 1A output) and the other side to the Aud Click.
3. While charging, LED indicator will remain red until fully
charged. Once fully charged, LED will turn off.
Remark: USB only charging function
Noted : We recommend you keep charging the unit if you set alarms
to prevent battery low and missed alarm.
1. If the unit behaves abnormally, just use a paper clip or
similar shaped tool to press the reset button which is located
at the bottom of the unit.
2. After reset is done, you need to set it up it
from the beginning again.
THE DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT WASTE PRODUCTS ON THE P
ART OF FINAL USERS IN THE EUROPEAN UNION
This symbol on the product or on the container indicates that this product cannot be eliminated with the
general waste.The user is responsible for eliminating this kind of waste by throwing them away at a
“recycling point” specifically for electrical and electronic waste.Selective collection and electrical
equipment recycling contribute to preserve natural resources and warrant waste recycling to protect
environment and health.In order to receive further information about electrical and electronic waste
collecting and recyling,contact your Local Council,the service of household waste or the establishment
where the product was acquired.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Use the This product in the environment with the temperature between -10oC and 50oC.
For the following equipment:
Is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC,
The equipment was passed. The test was performed according to the following European standards:
ETSI EN 300 328 v1.9.1 (2015-02); ETSI EN 301 489-1 V1.9.2: 2011-09; ETSI EN 301 489-17 V2.2.1: 2012-09;
EN 62479:2010

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:08:02 11:07:45-04:00
Creator                         : Adobe Illustrator CS5
Modify Date                     : 2016:09:28 10:10:27+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Audclick_QSG_072516
Metadata Date                   : 2016:09:28 10:10:27+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19167 bytes, use -b option to extract)
Instance ID                     : uuid:bcdcd798-8362-4f1f-b12b-1667e39c2526
Document ID                     : xmp.did:F87F1174072068118083CB4FC65E534B
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:9a9ca9a2-29ad-5248-a04e-c6172daad720
Derived From Document ID        : xmp.did:F77F1174072068118083C720F5BBCEEC
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F87F117407206811822AD4E86E0CCA70, xmp.iid:F87F1174072068118A6DDDD65C43505F, xmp.iid:F97F1174072068118A6DDDD65C43505F, xmp.iid:F77F1174072068118083C720F5BBCEEC, xmp.iid:F87F1174072068118083CB4FC65E534B
History When                    : 2016:07:07 13:44:10-04:00, 2016:07:12 16:36-04:00, 2016:07:12 17:25:34-04:00, 2016:07:25 15:36:39-04:00, 2016:08:02 11:07:40-04:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Users/jieunlee/Downloads/Screen Shot 2016-07-07 at 1.46.05 PM.png
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 12.000000
Max Page Size H                 : 18.000000
Max Page Size Unit              : Inches
Font Name                       : MyriadPro-Light, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold
Font Family                     : Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro
Font Face                       : Light, Regular, Semibold, Bold
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False
Font File Name                  : MyriadPro-Light.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 286 CVU, PANTONE 311 C, PANTONE 311 U
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 4

EXIF Metadata provided by EXIF.tools