u blox Malmo 090103AP Wireless Communication System Module User Manual Integration Manual I

u-blox Malmo AB Wireless Communication System Module Integration Manual I

Integration Manual I

Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 1 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
Assemble Specification for
cB-RBEPAi-02-0
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 2 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
Table of content
1 Objective.................................................................................................................................3
2 Assemble overview.................................................................................................................4
2.1
Bill of material (BOM).................................................................................................................4
2.1.1
Parts included in the design..................................................................................................4
2.2
Patches ..........................................................................................................................................4
2.3
Labels............................................................................................................................................4
2.4
Mechanical assemble....................................................................................................................5
2.5
Application download...................................................................................................................7
2.6
Production test ..............................................................................................................................7
2.6.1
Test instructions....................................................................................................................7
2.6.2
Test report.............................................................................................................................7
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 3 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
1 Objective
This document is a document for assembly of a cB-RBEPAi-02-0 product.
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 4 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
2 Assemble overview
2.1 Bill of material (BOM)
2.1.1 Parts included in the design
Mechanics, mounted PCB’s, connectors etc. The BOM is unique for every product.
Document name: cB-0186 (cB-RBEPAi-02-0) BOM
Document number:
Document file: cBProject-0810-05 cB-0186 (cB-RBEPAi-02-0) BOM.xls
Revision: 1
2.2 Patches
Document name:
Document number:
Document file:
Revision:
Time consumption [s]:
2.3 Labels
Printed label part no: cB-7433-01
Printed label revision: 1.0
Label document file:
Label document
revision:
Label part no:
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 5 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
2.4 Mechanical assemble
1. Open the test program named "cB-2150" and select artnr cB-0186.
2. Enter your name
3. Press Login.
4. Attach the “EPA Tester” connector.
5. Start the production and test of the board by pressing "Start". Wait as long as the status field is
YELLOW. This takes around 1 minute and maximum 2 minutes.
6. If the status field becomes GREEN, then the board is OK. Three identical labels (cB-7433-01,
BOM pos 3) are printed.
If the status field becomes RED, then the board is NOT OK.
7. Place the front label (BOM pos 2) on the plastic top housing.
Figure 1 Front label mounted on the plastic housing
8. Place one of the generated labels (cB-7433-01, BOM pos 3) on the back housing according to
Figure 2 and one on the side according to Figure 3. The remaining label shall be used in next
production step.
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 6 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
Figure 2 Label mounted on the plastic housing back
Figure 3 Label mounted on the plastic housing side
9. The cB-RBEPAi-02-0 is ready for the next step.
Utfärdare / Issued by Datum / Date Beteckning / Ref. Sida / Page
Andreas Nielsen 2009-01-15 cBProject-0901-09 7 (7)
Ärende / Subjekt Godkänd av / Approved by
Assemble Specification for cB-RBEPAi-02-0
Template update: 00-12-01
2.5 Application download
This step downloads the application firmware etc. to the unit.
Document name:
Document number:
Document file:
Document Revision:
Application firmware:
Application Revision:
Time consumption [s]:
2.6 Production test
The test should be done when the test unit is completely assembled.
2.6.1 Test instructions
Document name:
Document number:
Document file:
Revision:
Test software:
Test software rev:
Time consumption [s]:
2.6.2 Test report
Detected errors from the test phase are logged in a test report, the test report could be located at the
production company or the information is from the production company.
Document name:
Document number:
Document file:
Revision:

Navigation menu