ASSALOY SCYICLS2 Microprocessor Controlled Networked Locks User Manual XX XXXX Exhibit Cover

Download:
Mirror Download [FCC.gov]
Document ID	1450095
Application ID	ul8b2CIRx1Qo6IELHp2Ecw==
Document Description	P1 Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.63kB (2895424 bits)
Date Submitted	2011-04-18 00:00:00
Date Available	2011-04-19 00:00:00
Creation Date	2011-04-13 14:35:37
Producing Software	Adobe Acrobat 9.0.0
Document Lastmod	2011-04-13 14:35:37
Document Title	Microsoft Word - XX-XXXX - Exhibit Cover.doc
Document Creator	Adobe Acrobat 9.0.0
Document Author:	beth.gray

Certification Exhibit
FCC ID: U4A-SCYICLS2
IC: 6982A-SCYICLS2
FCC Rule Part: 15.225
IC Radio Standards Specification: RSS-210
ACS Report Number: 11-0071.W06.11.A
Manufacturer: Assa Abloy, Inc.
Model: P1-IM/IKM
Manual
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
PR
EL
IM
IN
AR
P1
A8032D
12/10
Copyright 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
PASSPORT 1000
Mortise Lock
Installation Instructions
Table of Contents
Warning . ..................................................................................2
General Description..................................................................3
Hardware Specifications..........................................................3
Electronic Specifications..........................................................3
Installation Wiring Overview....................................................3
Installation Wiring....................................................................4
Parts Breakdown......................................................................7
Installation Instructions...........................................................7
Operational Check .................................................................17
Warning
AR
IN
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
10/10/10
Industry Canada:
EL
IM
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications were met.
PR
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
FCC
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Cet appareillage numérique de la classe A répond à toutes les exigences de l’interférence canadienne
causant des règlements d’équipement. L’opération est sujette aux deux conditions suivantes: (1) ce
dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle
interférence reçue, y compris l’interférence qui peut causer l’opération peu désirée.
Observe precautions for handling electrostatic sensitive devices.
Warning SARGENT Mfg. Co. v.P Series locksets utilizing a door position switch (DPS) are not rated for,
or intended for use in life safety applications.
1-800-810-WIRE • www.sargentlock.com • A8078A
Passport 1000 Series P1 PoE Mortise Lock
General Description
The SARGENT Passport Series v.P1 cylindrical lock is available with either an HID® Prox 125 kHz or 13.56 MHz
iCLASS® technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet) providing
access control with Magnetic swipe and optional Proximity Reader and/or Keypad, as well as detailed audit capabilitiestechnology as a proven alternative to traditional access control installations. The v.P1 is a self-contained microprocessor-controlled access control product with non-volatile memory. It uses the existing network cable to communicate with
access control systems. The v.P1 lock holds a total of 2400 different user codes.
Using PoE technology coupled with third party software, this v.P1 online lock offers a complete, integrated
access control system.
The Passport Series v.P1 cylindrical lock may be used for both indoor and outdoor applications. A weatherprotective gasket is recommended for outdoor applications.
HID and iCLASS are registered trademarks of HID Global Corporation.
•
Inside lever retracts latch
•
Magnetic swipe standard with optional 125 kHz
Proximity Reader (specify PRX-), 13.56 MHz
reader (specify IKM-), and/or keypad (specify KP-)
•
Locks furnished for 1-3/4” doors only
•
Grade 1; UL Listed
•
Outside lever controlled by any combination of
keypad, magnetic keypad, iCLASS, prox (proximity) reader, or mechanical cylinder
•
Easily retrofits existing Passport 1000 door preps
(cylindrical locks)
•
Latch 1/2” standard
3/4” throw fire-rated double doors
(optional) (41- prefix)
•
Guarded latch
•
Outside lever is unlocked through access
control credentials only
AR
ADA Compliant
Electronic Specifications
•
Input Power: PoE Class 2 Device, as defined
by IEEE 802.3af, requires up to 7 watts
over structured cabling
•
2,400 users per lock; 10,000 event audit trail
•
Multiple time zone and holiday access scheduling
•
Uses existing Magstripe keycards (track 2)
•
Centralized lock management
•
•
Real time door status monitoring
Magnetic Stripe Card Coercivity: HiCo (4000 Oersted) or
LoCo (300 Oersted)
•
First-In unlock configuration, either by time or by
user (selectable)
•
Lock down capable
Installation Wiring
Overview
SARGENT Passport Series PoE
v.P1 Typical Application
* Lockdown and real-time door
status monitoring available
only when lock is hard-powered
• Supports HID 125 kHz prox or 13.56 MHz iCLASS
credentials (26 - 39 bit); supports CSN reads for other
common 13.56 MHz cards, including MiFare, DesFire, and
Felica
Supplied by Others
Network Cable
Surface Mount RJ45
Network Switch (802.3af)
LMT: Lock Management Tool
A. PoE frame harness assembly
B. PoE data hinge from McKinney
(patent pending)
C. PoE door harness* from McKinney
D. DPS: Door Position Switch
(Cylindrical and Exits only)
E. Passport Series v.P1 PoE Lock
* Door width determines length
1-800-810-WIRE • www.sargentlock.com • A8032D
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IM
IN
•
Complete locksets with on-board memory
12/15/10
•
EL
Hardware Specifications
PR
Passport 1000 Series P1 PoE Mortise Lock
Installation Wiring
A. PoE Frame harness assembly
(From McKinney)
B. PoE data hinge (Patent Pending)
(From McKinney)
Supplied by CI
C. PoE Door harness*
D. Passport 1000 Online P1 PoE Lock
* Order of installation may vary.
Refer to appropriate sections for instructions.
B-Splice
Crimp Connector
RJ45-M
RJ45-F Jack
12/15/10
Cable
drain wire
concealed in
shrink tubing
Molex-M
IM
EL
Molex-F Molex-M
Molex-F
Cable: CAT 5e,
Patch Panel
Drain Wire Terminated on Rack
PoE
Lock
JST
4-Pin
4-Pin
Molex
Ground
Wiring to TIA-568-B Standard
1-800-810-WIRE • www.sargentlock.com • A8032D
Approved Software
Notes:
26 AWG stranded,
shielded, 100ohm
Ring Terminal
Secured to Lock
Mounting Plate
PoE Switch is
Terminated to
Earth Ground
IN
Cable: CAT 5e or higher
24 AWG shielded with drain wire
PR
Frame-Side
Harness
Assembly
(15' length)
Cable: CAT 5e or higher
24 AWG shielded, 100ohm
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
PoE Switch
AR
Drain Wire
Ceiling
Supplied by End User
Certified Integrator (CI) supplies and terminates
the B-Splice connector and the
Male RJ45 connector from harness to
end user provided facility cable
Patch Cable
Patch Panel to
PoE Switch
• Connectors go on only
one way. They cannot
be placed in an incorrect
position.
• Do not force and do not
offset connectors.
• Be sure they are completely seated (flush).
Passport 1000 Series P1 PoE Mortise Lock
Installation Wiring (Continued)
Frame Harness Installation
Components and wire harness supplied by McKinney: Suggested installation.
Supplied by CI
Cut end / ceiling-side PoE harness:
B-Splice
Crimp Connector
TIA/EIB-568-B Standard Wiring
3 4 5 6 7
Pair Number
RJ45-M
White/Green
Blue
White/Orange
Orange
White/Green
Green
White/Brown
White/Brown
Brown
IN
IM
2. Push one connector back through the hole and feed into the other access hole.
Each of the hinge-side harness connectors should end up threaded through
a different access hole and matched to the same size pin connector from
the door harness:
•
4-pin male molex connector.
•
6-pin male molex connector with ground wire.
PoE Data Hinge
4-pin M 4-pin F
Hinge-side harness connectors:
•
4-pin male molex connector
•
6-pin male molex connector with ground wire
Lock-side harness connectors:
6-pin M
Frame
•
Ring terminal
•
(2) 4-pin connectors
6-pin F
PoE Hinge (Patent Pending)
1-800-810-WIRE • www.sargentlock.com • A8032D
12/15/10
1. Feed cut end of harness into hole on hinge-side through single access hole.
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Hinge side of PoE harness:
Molex-M
White/Blue
EL
Cable
drain wire
concealed in
shrink tubing
White/Orange
PIN
Do not confuse pair numbers with pin numbers. A pair number is
used for reference only (eg: 10BaseT Ethernet uses pairs 2 & 3). The
pin numbers indicate actual physical locations on the plug and jack.
PR
Frame-Side
Harness
Assembly
(15' length)
Cable: CAT 5e or higher
24 AWG shielded, 100ohm
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
White/Blue
AR
Ceiling
Wire
Passport 1000 Series P1 PoE Mortise Lock
PoE Data Hinge
Order of installation may vary. Refer to appropriate sections for instructions.
Hinge-side harness connectors:
•
4-pin male Molex connector
•
6-pin male Molex connector with ground wire
Lock-side harness connectors:
•
Ring terminal
•
(2) 4-pin connectors:
•
4-pin Molex connector
•
4-pin connector
Notes:
Connectors go on only one way. They cannot be plugged to incorrect position.
•
Do not force and do not offset connectors.
•
Be sure they are completely seated (flush).
AR
4-pin M
4-pin F
IN
4-pin F
•
Drain Wire
12/15/10
PoE Door Harness
6-pin M
IM
6-pin F
EL
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
6-pin F
Cable: CAT 5e,
26 AWG stranded,
shielded, 100ohm
PR
Order of installation may vary. Refer to appropriate sections for instructions.
1. Prop door open.
2. Tape the two lock-side 4-pin connectors to the ring terminal.
3. Using the ring terminal, carefully fish the assembly through the
door channel to the lock.
4. Remove tape from ring terminal and door harness connectors.
Hinge-side harness connectors:
•
4-pin male Molex connector
•
6-pin male Molex connector with ground wire
Lock-side harness connectors:
•
Ring terminal
•
(2) 4-pin connectors:
•
4-pin Molex connector
•
4-pin connector
Notes:
•
Connectors go on only one way. They cannot be plugged to
incorrect position.
•
Do not force and do not offset connectors.
•
Be sure they are completely seated (flush).
1-800-810-WIRE • www.sargentlock.com • A8032D
JST
4-Pin
4-Pin
Molex
PoE Lock
Passport 1000 Series P1 PoE Mortise Lock
Parts Breakdown
P1 PoE Lock with Magnetic Card Swipe With or Without Keypad
10
10 14
13
13 13
12
12 12
11 11
11
10 10
10
10 10
99
AR
Inside
IM
IN
Inside
Inside
P2 P2
Outside
Outside
DESCRIPTION
52-0757
Lens (Cliplite)
52-0738
Outside Passport Escutcheon Only (Magnetic Swipe and Keypad)
PR
PART No.
52-0739
Outside Passport Escutcheon Only (Magnetic Swipe)
52-0760
Light Pipe (Cliplite)
52-3593
Slim Style Keypad Assembly
01-9299
#4-40 x 3/16” Phillips Pan Head Screw
52-3591
Swipe Reader Assembly
52-0745
Online Interface PCB
52-3209
Harness Assembly
52-0748
Inside Mounting Plate
10
77-0168
#8-32 x 1-7/8” Phillips Flat Head Screw
11
01-1146
#8-32 x 3/8” Phillips Flat Head Screw
01-1176
#8 x 3/8” Phillips Flat Head Wood Screw
12
52-4246
Modular Component
13
52-3592
Inside Escutcheon Assembly
14
01-4421
#8-32 x 1/2” T-20 Torx Pan Head Screw
1-800-810-WIRE • www.sargentlock.com • A8032D
12/15/10
EL
ITEM No.
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Outside
Passport 1000 Series P1 PoE Mortise Lock
Parts Breakdown (Continued)
P1 PoE Lock with Magnetic Card Swipe , 125 kHz Prox and Keypad
10
13
11
IM
IN
AR
10
10
10
11
Inside
P2
Outside
12/15/10
EL
ITEM No.
PART No.
DESCRIPTION
52-1103
Outside Passport Escutcheon only
(Magnetic Swipe, Keypad and Proximity Reader)
52-3593
Slim Style Keypad Assembly
01-9299
#4-40 x 3/16” Phillips Pan Head Screw
52-4243
Swipe Reader Assembly
52-1106
Prox Reader Gasket
52-4206
Antenna Assembly
52-0745
Online Interface PCB
52-3209
Harness Assembly
52-1109
Back Plate
10
52-0748
Inside Mounting Plate
11
77-0168
#8-32 x 1-7/8” Phillips Flat Head Screw
12
01-1146
#8-32 x 3/8” Phillips Flat Head Screw
01-1176
#8 x 3/8” Phillips Flat Head Wood Screw
PR
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Outside
12
13
52-4246
Module Assembly
14
52-3592
Inside Escutcheon Assembly
15
01-4421
#8-32 x 1/2” T-20 Torx Pan Head Screw
1-800-810-WIRE • www.sargentlock.com • A8032D
Inside
Passport 1000 Series P1 PoE Mortise Lock
Parts Breakdown
Magnetic Card Swipe With 13.56 MHz iCLASS and Keypad
AR
IN
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
10
ITEM No.
PART No.
DESCRIPTION
52-4402
Outside Mask Assembly
52-1255
Outside Escutcheon - iCLASS
52-3593
Slim Style Keypad Assembly
01-9299
#4-40 x 3/16” Machine Screw
52-4243
Swipe Reader Assembly
52-4401
iCLASS Module Assembly
52-3209
Harness Assembly
52-4410
iCLASS Harness
52-1109
Back Plate
10
01-9300
#4-32 x 5/16” Plastite Screw
1-800-810-WIRE • www.sargentlock.com • A8032D
12/15/10
PR
EL
IM
Passport 1000 Series P1 PoE Mortise Lock
8200 Series Mortise Lock
IN
14
12/15/10
13-0140
See catalog
DESCRIPTION
#41 Cylinder (1-1/8” Minimum Length)
Cylinder Compression Spring
1KB-1 Cylinder Rosette
See catalog
Mortise Lockbody
77-2592
130 KB Thumbturn for Deadbolt Functions Only
See catalog
Inside Lever Handle
See catalog
Outside Lever Assembly
82-0368
Spindle
82-3088
Inside Lever/Knob Adapter Plate Assembly
10
01-1495
#8-32 X 5/8 Machine Screw
11
82-0612
Non Loosening Wave Washer
12
See catalog
Mortise Rose
13
82-0347
Spindle Spring
14
01-1019
#12-24 X 1/2” Machine Screw
15
01-2299
12 X 1-1/4 Wood Screw
16
82-0578
Outside Front Plate (Electrical, Latchbolt & Guardbolt)
82-0579
Outside Front Plate (Electrical, Deadbolt, Latchbolt and Guardbolt)
01-1028
#8-32 X 1/4 Machine Screw
17
10
17
IM
See catalog
16
EL
PART No.
PR
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
15
ITEM
11
AR
10
12
1-800-810-WIRE • www.sargentlock.com • A8032D
13
Passport 1000 Series P1 PoE Mortise Lock
Door Preparation
A. Verify Hand and Bevel of Door
Left Hand
Hinges Left.
Open Inward.
“LH”
Left Hand
Reverse Bevel
Hinges Left.
Open Outward
“LHRB”
Right Hand
Hinges Right.
Open Inward.
“RH”
Right Hand
Reverse Bevel
Hinges Right.
Open Outward.
“RHRB”
AR
B. Verify Product Label
• (KP-) P1- (PRX- or IKM) 82276 x Rose & Lever x Finish x Hand
IN
• (KP-) P1- (PRX- or IKM) 82277 x Rose & Lever x Finish x Hand
• (KP-) P1- (PRX- or IKM) 82278 x Rose & Lever x Finish x Hand
• (KP-) P1- (PRX- or IKM) 82279 x Rose & Lever x Finish x Hand
IM
Note: KP- is for the optional Keypad and PRX- is for the optional Proximity Reader
• (IKM-) P1- (PRX) 10G77 x Rose & lever x Finish x Hand
• Field template: A7950 for wood and metal doors.
• Door manufacturers template: 4651.
Outside of Door
Inside of Door
Through Bolt Holes
Inside Mounting Plate
Mounting Holes
Through Bolt Holes
Raceway for Power
Raceway for Power
Controller Cutout
Controller Cutout
Cylinder Hole
Thumb Turn Location
(Deadbolt Functions Only)
Lever Handle Holes
Lever Handle Holes
Mortise
Pocket
(8200)
1-800-810-WIRE
• www.sargentlock.com • A8032D
11
12/15/10
C. Door Preperation
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Note: IKM- is for the 13.56 MHz Reader option
EL
Installation Instructions
PR
Passport 1000 Series P1 PoE Mortise Lock
Connector
2 How to Change Hand of Lockbody
Ring Terminal
A. Reverse Lock Hand
Red surface of locking piece must face the outside/
locked side of door. To rotate locking piece (Fig. 2A):
1. Position lock body with red surface of locking
piece visible.
2. Insert blade type screwdriver into locking piece
slot to rotate locking piece toward back of lock
body.
3. Rotate the locking piece 180° until RED surface is
on opposite side.
Slot
Note: Red indicates locked side (outside). Wire
harness MUST exit through
the inside/non-cylinder side of the lockbody.
AR
B. Retaining Ring
Inside of Door
IM
2. Orient the plastic retaining ring so that the
word
Bottom is located at the bottom of the cylinder
hole.
Latchbolt
3. Route the wires from the top of the cylinder
hole
into the slot on the top of the plastic retaining
ring,
NOT through the retaining ring.
PR
EL
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
12/15/10
IN
Make sure the plastic retaining ring is seated correctly (Fig. 2B):
1. The wires and the plastic retaining ring must
be located on the non-cylinder side.
Plastic
Retaining
Ring
C. Reverse Latch Hand
Beveled surface of latchbolt must face strike.
The deadlatch is self adjusting.
To change the hand of the latchbolt:
1. Insert the blade of a slotted screwdriver (>1/4”)
into the spade shape slot behind latch.
2. Rotate the screwdriver 90° to push latchbolt out
until back of bolt clears lock case front.
Right Hand
Lock Shown
3. Rotate latchbolt 180° until the latchbolt
drops back into the lockbody.
Note: Latch cannot be unscrewed.
Locking Slide
Red on locked side
Push In
Fig. 2A
12
1-800-810-WIRE • www.sargentlock.com • A8032D
3 Install Lock Body
1. Feed the wires first through the mortise pocket
and out the inside prep, followed by the
lockbody (Fig. 3A).
2. The wires from the lockbody exit the inside
door prep through the mortise pocket (Fig. 3B).
3. Loosely secure the lockbody in the door with
two #12 x 1-1/4” wood screws or
#12-24 x 1/2” machine screws.
Must feed
the harness first,
followed by
the lock body.
PoE Cables
Feed wire
into mortise slot.
AR
(2) #12 x 1-1/4” Long
Flat Head Wood Screw
for Wood Doors
Fig. 3B
EL
Fig. 3A
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IM
IN
(2) #12-24 x 1/2” Long
Flat Head Machine Screw
for Metal Doors
Mortise Lock Body
Connector and Ground
Ring Terminal
4 Install Cylinder
1. Slide cylinder through the spring and rosette/collar and screw into lockbody, rotating the cylinder clockwise.
PR
Cylinder should be flush with rosette/collar.
Note: SARGENT logo must be horizontal
and on the top of the cylinder (Fig. 4B).
2. Secure the cylinder by tightening cylinder
clamp screw located above the deadbolt.
3. Using the key, verify that the key retracts
the
latchbolt (and deadbolt).
Position cylinder so that the SARGENT logo is right-side up.
Correct
Align cylinder groove
with tapped hole,
then tighten set screw
to hold lock cylinder.
Incorrect
Fig. 4B
1-800-810-WIRE • www.sargentlock.com • A8032D
13
12/15/10
Fig. 8A
Passport 1000 Series P1 PoE Mortise Lock
Passport 1000 Series P1 PoE Mortise Lock
5 Install Inside and Outside Levers
1. Slide the outside lever and spindle assembly through the door and lockbody.
2. Using the inside adapter plate and spindle, secure loosely with (2) #8-32 screws.
Note: Position threaded hole on the inside adapter to align with lever hole.
3. Tighten the lockbody screws on edge of door.
4. After the lockbody screws are tightened, tighten both inside adapter screws.
5. Position and attach rose over inside adapter.
6. Position and secure inside lever to the
inside adapter with set screw.
AR
PoE Cables
IM
Fig. 5A
IN
Outside Lever Assembly
Mortise Lock Body
Connector and Ground
Ring Terminal
Rose
Inside Adapter Plate
Inside Lever
EL
1. Insert alignment tool (supplied) into lock body thumb
turn.
2. Slide back plate over tool and make level.
PR
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
6 Deadbolt Functions Only (82276 & 82277)
3. Secure back plate to door with two (2) #6 x 3/8”
round head
wood screws or #6-32 x 3/8” round head machine
screws.
4. Dispose of tool, position thumb turn over back plate
(Fig. 6A) and secure with #6-32 x 1/4” flat head
screw.
Note: Thumb turn should cover screw head when
deadbolt is retracted.
Refer to instructions (A5675G) included in package
included with lock.
#6 x 3/8” Round Head
Wood Screws
#6-32 x 3/8" Round
Head Machine Screws
Thumb Turn
#6-32 x 1/4"
Flat Head Screw
Fig. 6B Detail
12/15/10
Back Plate
14
1-800-810-WIRE • www.sargentlock.com • A8032D
Passport 1000 Series P1 PoE Mortise Lock
7 Install Gasket (Optional)
Note: Optional, for non-fire rated doors only.
For non-fire rated door applications, an optional gasket may be
used as a weather seal between the escutcheon and the outside
door surface.
Gasket
Peel off adhesive backing and attach to outside escutcheon.
Outside
Passport
Trim
8 Install Outside Escutcheon and Mounting Plate Assembly
AR
Fig. 7A
1. Insert the mounting posts through holes as shown.
2. On the inside of the door, position the mounting plate
over the indicated holes.
IN
3. Feed PoE and reader cables through side opening (Fig. 8A).
Reader cable
(iCLASS only)
Cable from lockbody feeds from bottom (Fig. 8A and 8B).
IM
4. Attach 2 ground ring terminals, one from controller and
one from lock body to bottom right corner using one
#8-32 x 1-7/8” flat head machine screw.
Controller /
Reader
Cables
Position
ground ring
terminal
upright,
then
tighten
screw.
Reader cable (iCLASS only)
Lockbody Cables
6. Attach two (2) #8 x 3/8” flat head wood screws for
wood doors or (2) #8-32 x 3/8” flat head machine
screws for metal doors (Fig. 8C).
Mounting Plate
(4) #8 - 32 x 1-7/8”
Flat Head
Machine Screws
Reader cable (iCLASS
only)
Outside
Passport
Trim
PoE Reader Cables
Attach ground wires to
bottom right screw
Fig. 8B
(2) #8 - 3/8”
Flat Head
Wood Screws OR
(2) #8 - 3/8”
Flat Head
Machine Screws
10-pin from lock body
(2) 4-Pin PoE
connectors
24-pin from reader
Ground wires and PoE and
Lock body harnesses
Reader cable (iCLASS only)
Fig. 8C
1-800-810-WIRE • www.sargentlock.com • A8032D
15
12/15/10
EL
PR
IMPORTANT: If the following step is skipped,
the product will not be UL-compliant:
Lock Ground
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Make sure they are positioned upright (Fig. 8A).
5. Insert other three #8-32 x 1-7/8” flat head machine
screws and tighten, fastening the outside escutcheon
to the door (Fig. 8B).
Passport 1000 Series P1 PoE Mortise Lock
9 Install Inside Module Component Assembly
Insert bottom of Module Component Assembly first (Fig.
9A), then clip top of Assembly to backplate, verifying
both tabs attached securely.
Tabs
AR
Fig. 9A
Outside of Door
IN
10 Attach Connectors
Secure the following connectors onto the circuit board (Fig.
10A and 10B):
IM
1. Secure the 10-pin lock body assembly connector (e).
2. Secure the 24-pin keypad/card reader connector (d).
12/15/10
EL
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
3. Secure two 4-pin PoE connectors (b and c).
4. Secure the iCLASS reader cable (f).
Notes:
PR
Route wires from behind backplate through battery compartment.
•
Connectors go on only one way.
•
Do not force and do not offset connectors.
•
Be sure the connectors are completely seated (flush).
16
(2) 4-Pin PoE
connectors
24-pin from reader
10-pin from lock body
9-pin reader cable (iCLASS only)
1-800-810-WIRE • www.sargentlock.com • A8032D
Detail 10B
Passport 1000 Series P1 PoE Mortise Lock
11 Install Inside Escutcheon
1. Position inside escutcheon as shown (Fig. 11A).
Verify that all wires are positioned within the
escutcheon
to avoid pinching.
(2) #8-32 x 1/2”
Torx Screws
2. Attach escutcheon with (2) #8-32 x 1/2”
T-20 Torx pan head screws.
3. Straighten escutcheon and tighten securely.
Fig. 11A
IM
IN
AR
DO NOT OVERTIGHTEN.
PR
Attach front plate with (2) #8-32 X 1/4” flat head
screws (Fig. 12A).
(2) #8-32 x 1/4”
Flat Head Screws
Fig. 12A
1-800-810-WIRE • www.sargentlock.com • A8032D
17
12/15/10
EL
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
12 Attach Outside Front Plate
Passport 1000 Series P1 PoE Mortise Lock
Operational Check
IMPORTANT: Be sure to test functions prior to closing door.
In all cases, perform the following checks:
1. Ensure that inside lever retracts latch (and deadbolt for deadbolt functions).
•
For units with cylinders, the following checks apply:
Insert key into cylinder and rotate:
b. The key should retract the latch and the key should
rotate freely.
c. The key should extend and retract the deadbolt.
For units without a keypad, add card using LCT
software and test.
•
For units with a keypad, add pin and card using LCT
software and test.
2. LED signalling:
After using a valid credential, a green flash followed by
three fast amber flashes indicates a low power condition.
Check the input voltage.
•
EL
If the input voltage is low, disconnect the lock from the
power source and check the power source
voltage. If the power source voltage is correct,
inspect the lock wiring for a possible short.
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
12/15/10
IM
•
IN
AR
•
If the lock loses power, it will flash rapid amber
for approximately one minute.
PR
After that, the lock will no longer be functional.
3. When you have completed the tests, close the door, ensuring
latchbolt and deadbolt fully extend into strike plate without
binding.
18
a. There should be no friction against lock case, wire
harness, or any other obstructions. If friction or binding occurs, re-adjust cylinder and wiring harness to
eliminate issues.
1-800-810-WIRE • www.sargentlock.com • A8032D
Y
AR
IN
IM
EL
PR
SARGENT Manufacturing
100 Sargent Drive
New Haven, CT 06511 USA
800-810-WIRE (9473) • www.sargentlock.com
Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices,
electro-mechanical products and access control systems for new construction, renovation, and replacement applications.
The company’s customer base includes commercial construction, institutional, and industrial markets.
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
ASSA ABLOY is the global leader in door opening solutions, dedicated to
satisfying end-user needs for security, safety and convenience.
A8032D -12/10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : beth.gray
Create Date                     : 2011:04:13 14:35:37-04:00
Modify Date                     : 2011:04:13 14:35:37-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2011:04:13 14:35:37-04:00
Creator Tool                    : Adobe Acrobat 9.0.0
Format                          : application/pdf
Title                           : Microsoft Word - XX-XXXX - Exhibit Cover.doc
Creator                         : beth.gray
Document ID                     : uuid:44a044a1-f585-4932-9699-7355bf2ff7bf
Instance ID                     : uuid:09f242e1-790f-4e15-b940-24ec6994f069
Producer                        : Adobe Acrobat 9.0.0
Page Count                      : 20

EXIF Metadata provided by EXIF.tools