ONAIRSOLUTION ONAIRUSBHDTVGT USB HDTV Receiver User Manual
ONAIRSOLUTION Co., Ltd. USB HDTV Receiver
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
Tnis “manual mums hmto ms IJSB m'ml GT This product supports Dolby Digital System. This product was made under the license oi Dolby Laboratories, "Dolby Pro Logic“ and Double D is the trademark 01 Dolby Laboratories Ii you have any dlflicumes to use the products cv have any questions, piease Contact our technical suppon ior service assis1ance Tel - 52-1 553-5773 Fax : 324-703-3151 URL : vwwvonairsolmwmmkr Email : suppons@mairsolmion.co.kr Technical Support Oflica Hour Mon-Fri:1D'DD AM ~17 00 PM 2" ,4" Sea 10 MAM-1500 PM The oiiice is closed on every 1"',3" 5" Saturday 01 Holidays, Com/rig!“ Each oi the companies involved in this manual copyrights the software and the firmwae In [his Every software and firmware is protected under the intellectual property right, treaty, computer prowam preservation. copyright law and lrternational copyrlgM convenllon You cannon copy and excerpt this manual wnhom wmlsslon. w-mnty We warem our producls ior a period oi one year from the date oi purchase This device IS already registered on Electro - Magnetic Compatibility, OnAir USB HDTV GT is available everywhere CDWfiflll ©2005 onAl'l'Solulinn Co., Ltd. All Right Ressved. Mlfi in Rule- FCC Information This dei/ice complies With Part 15 of the FCC Results. Operation is subject to the followmg two conditions: (1) This DeVice may not cause harmful interface, and (Z) This deVice must accept any Interference received, including interference that may cause undefined operation, Note: This equipment has been tested and found to comply With the limits for CLASS B digital demce, pursuant to Part 15 of FCC Rules. These limits are deSigned to provide reasonable protection against harmful interference when the equipment I5 operated in a commercial enVironment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Will not occur in a particular installation. If this equipment does cause harmful interference to radio or teleVision reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the followmg measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the eqmpment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could v0id the user's authority to operate the equipment Important Safety Notice Warning (Always comply Withthese instructions to prevent the risk of injuries and the damage of youLsystem.) It IS strongly recommend you to read the user's manual before you use the product. It is stroneg recommended that you carefully readthismanual betore using your product. fThere are two waming symbols - waming and notice. Please rela' to the lollowing definition ot "wanting“ and "notice“ fin“, Intended to alert the userto the possible serious injury or death byyour Violation ofthe |n51ruct|on f Intended to alert the userto the possible minor injury or product damage by yourwolation olthe instruction {it Cautionto be secured against a specific condition. The damage due to the user’s lawlessness will diarge the user for mum A“. An abnormal power cable, AM. Do not pull the plug by Drcing it in. Do not (a uch 8 Am Please insed plug lully into the Bullet LDuse plug, and oulet may cause electric shock or plug and an oulet with a vwet hand whlch mayv cause electric shock or connection may cause lire, fire. Do ncfi bend the power Do not overload the outlet. Do nm put any tablecloth cable excessively Cr get it Do nm conned the in the vemilalcln holes For squeezed by the heavy additional outlet on the better veriilalion things, whlch may cause maln outlet, whlch may lt may rest! |n rrrethruugh eleMrlcshockovflre cause eleeinc shock or uncreasmg Ihe unner ire. temperature Please infial this device on the flat place. Overturned mum may cause mechanical trouble or iwv. lle AM Don't use this device near the combusfibles and the inllammables whlch may cause live L1 explosion. ,&w Don! insiall this device be side lactating objects such as candles. mosquito coils, and cigaremes which ' may cause me ,. ‘v l-o \ x it? AL Please be aware 01 rain infiltration no the house when using an exterior antenna, ’ Am Be sure to unplug when cleaning the device. it may result 11 electric shock or Vlre ’ vb G69}: A.“ Please “stall antenna |ar sway the high- tension cahl e or "am communication cable ll . not. it may cause electric shock or fire fi) eff Am Dont insert chopsticks, Wives, and gimlets into a ventilation opening. Al, or ANT terminals ThlS may cause electric shock 01 ' tire. “3A lei? Unplug when unused lcr long periods oi time This may cause eleclnc shock or five, Keep the device am or children's reach This may cause electric shock, l r iiéie When the device emits Smoke And bad odor, please unplug immediately Then give a call tn technical support. This may cause elec1ric shock or tire. Never op en, this repair and modify device arbitrarily This may cause electric shock and tire. For afierseles service. please call technical support.GUD.9100 lGP 5750 580045900 520185005800 Mohlle PC Mohil'ny Radeun7530,9000,5800, 3 Gefuree 4 GO 420 ,440 ,480 9700.9330X200X600X700 ' Geforce FX GO 510352005600, ”5650 5700 8200 86m 6800 Go 1 C Mininum system requirement(Nm supporting DXVA) 0 VGA .AGF'4X with 32MEI Vldeo memory or higher (SAME or higher is recommended) CPU Penllum41.EGHz or higher/AMDAthlnn XP 2C00+ur higher is required 0 Memory. 120MB (256MB Recommended) 16 G. OnAir USB HDTV GT User’s Manual 1.4 Parts Details oPower LED :The I|ght's on aner pluggmg OnAlr USB HDTV and connectmg to your computer by USB cable OlR :For using remote control, this IR part receivesthe input signal OHDTV Signal LED zNo Digital TVsignaI turns its light on. OUSB Port: connectedto USB 20 Port ofsystem by USB cable QATSCI NTSCAntenna Input: connects to cable or terrestrial antenna Ammunulwmewm QVideo Input .This is video input port ofcomposite format and connects to Video out part of composite devices such as normal VCR, video camera. and camcorder QS-Video Input :This is S-Video input port of S-Video and connects to 9- video out port such as Super-VHS VTR. SEGA Saturn, and SONY PlaySatiun oAudio Input [LVtRj :/-\s the stereo input port of V|deo, th|s port connects to Audio out port of normal VCR and other devices to OnAir USElTV 2.Installation 17 2 Installation 2.1 Installation Checklist Please read the installation guide a wwwonairsolutionco kr first. and then install this device in your pc, 2.1.1 Vlfindes XP Sewioe Pack1nr higher First, right-click on the mouse to open the "Properties" from the desktop menu of "My Computer", then check out if the current operating system is MicrosofiVVindows XP Service Pack 1 or 2. If "MicrosofiWindowsXP Serwce Pack 1" is not installed in your operation system. then please download and install the ‘Servrce Pack 1" from the Windows Update on line. In case of Windows Servrce pack 2. you don’t have to update. Please openMicrosofl InternetExplorer, and choosethe tool menu on thetop ofmenu bar and click the "windows update" and run the update scan lithe update scan is completed, there wil be update scan result displayed. From the update scan result list, please download the Microsoft Windows XP Service Pack 1 from “Critical Updates and Service Pack" and install it. 2.1.2 “5821! Patch (H at Fix] Because the USB 2.0 is a new devrce, even Microsoit Windows XP Service Pack 1 has the USB 2.0 Device Driver hug. Forthe users oiSerwce Pack 2, no addnional patch is necessary At first, please confirm ifthe 'Windows XP Hot Fix - KBS22BE13" is installed on your system from the "program add) remove" under control panel. If your system has already installed this, your system had completed the patch of USBZD Devrce Driver Bug. If your system has not installed_this, please open Microsott lnternet Explorer, and choose the tool menu on the top of menu bar and click the "windows update“ and runthe update scan. lithe update scan is completedthere will be a Iis1 of update scan result displayed. From the list of update scan result, please find the recommended "andows XP SP1 update “(3322603)" underWindows XP menu and installit on yoursystem. This Hot Fix patch program is released by Microsoit to fix a failure to recognizing USB 2.0 device. 18 E USB HDTV GT User‘s Manual 2.2 Hardware Installation OnA|r USB HDTV GT ls an external HDTV device that can be connected Wlth personal computer or laptop through USEIZD port. Please plug in the supplied power adaptor into the hardware. and connect OnAir USB HDTV with USBZD port of desktop or laptop compmerathrough USB cable. m.mummmmn mmmmnmmum ammuwmwnum 2.Installztion 19 2.3 OnAIr USB HDTV GT Devioe Driver Insullatlon Please insert the provided mstallatxon CD into yoursystem's CDROM drive. The installation CD will aLtomatically start the installation. Fromthe displayed product list. select the driver installation under Onair USB HDTV and install Drive as follows. If the installat|on CD does not auto-run and display the product list, please run "Installerexe' file on your CD-ROM throuthWndow Explorer“ 2.3.1 Driver Installation 1. This window is for the user to select the language of the system. It selected "English". the driver installation system menu displays in English. Please click [OK] afier selecting "English". 2 This window notice displays when OnAir USB HDTV is ‘m. already connected with the ;=-w=smmzmm=:s:-- system before driver installation, which means the user will he m M able to install the driver for USB HDTV. Finally, ll OnAir USB HDTV is connected with system, please disconnect this device from USB port 20 i usn Huwcr Inn’s Manual -3. Guam pmgim uni puss [Nemfwhmerhstallaflum 4A II tha props-bu lav Insbilfion is veady, muse out [Mead] to proceed hlh (he MUCH 54 Than diva! Mimi)" is M. Press [OK] and m OnA‘l USE Tanhflnw. =m~glrnmhu mum-"nu. in man.- one ..-wm..:..m...4_.. ... :,.u..u.m...... m. m,- 2.Instzllztion 21 .Ycu should proceed wth the installation by Why the “Continue Anyway" option, Irmellhg the driver wil nm 51131 the performance 131 your computer, Germany, this message is received during the insulation Into a Mum/vs XP or Windows 2000 environmem Again, proceed with the insulation by selening (he Cumhue Anyway option . it hes been ready m Ins1ai| Onelr LEE HDTV Driver on yuur system. Ailey you have clicked the Finish bultun {D finish Sdup, 22 E USB HDTVGT User‘s Manual 2.4 OnAIr USB HDTV GTI-lppllmllon Somme Installation The OnAir USE! HDTV GT application soflware installation is plowded in given CD ROM. Please insert the provided installation CD into yoursystem's CD-ROM drive. The installation CD will automatically start the installation, From the displayed product list. please select the application soliware under OnAir USE HDTV v ll’the installation CD does not emu-run and display the product list, please run“lnstaller,exe"file onyouv CD-ROM by 'Window Explorer" 1. it will start the hstallation u...........»......,. program at OnAlr use HDTV mum ;:'va-;-f;=armuln~:rwl« application sultware 2. Please seled the lnlder that a_...__..... . u.._,......._ program will be installed ll you maunnmmmnnhu— ......_......_r......_.-....u.._ would like 10 select the mher folder, please press [Browse] button. To install program at selened folder, please press [Next] lur installation. _.__4__...-.-........,...._ mun—n. Pfifimmfi v hum-um...“ p awn-mun...— » (Manama-mu an E moan-u...- mum—mnu—umnu—tniu 4mm“ (hid-ate“ _.-._¢nm;.m mm... 3. installation 23 user can select some items (0 be installed. it is recommended fio install software items. For next step, please press [Next]. Ins1a|lShleld Wllavd finished the insqauatiun ul application soflweve fov ‘OnAir USB H D TV". The InslaIShieId Wizard slans. and directs you through the reel of the installation process as described below. 24 ‘ USB HDTV GT User's Manual “ham—Mum u n.— mic—n! mun-u.— munmhnq—m maumqu-qn.“ me E. At ths Wm Window. cfick Next. Read the license ageement, then click Yes il yuu agree to meterms. At the Product Amivetion screen. step 1 of 2, ante: (he rsqulrsd moment)", then nick Ilekt. n.._-_._..............._ m-.-- .......~. nu— i 1111! E! .._._..... ‘ w.“ ..“M. \ wanna-- cum-mu. E1 “hum-sum tuba-«BA Mn“. whamfl.‘ fl a. mmilonn , installation 25 At the Product Anivatlnn screen, step 2 ol 2. enter the amivatlcfn code,then click mm 10. At the Choose Destination 11. window, browse in locate the folder where you want the NVIDIA DVD Decoder files unfialled, or jusi use the devaun location and 050k um. Setup proceeds in ins1a|| the files At the lnstaIIShizld Wizard Complete Window, tick Finish 26 ‘ USB HDTV GT User's Manual 3. How to use OnAlr USB HD'IV GT 3.1 Swen Components nvwmow] [DTV Operation Camml Windmfll [Channel Vlfinduw] 3. "mm use OnAir USB HDTV 27 [Color Adjustment] Play List] [Zoom Navigator] -|| x-w * . 3.1.1'IV‘MmIow It displays a video source input such as Digital TV, Analog TV, “den, and S- Video. 0 Hide: Ii hides the TVwinduw wilhnu closing the TV program. 0 Class: I! closssthsTmegram. Righbdck onlhe mouse (Dime TV windnwwl display me lollow'n; submenu. 3.1.2 Operatinn Control “fidnw and Channel Windw MBC DTV an!) “null-nu 28 .1. 0000000000 g 00000 0 0 00000000 0000 a: Q USB HDTV GT User‘s Manual Button description on Operation Control Wldow and Channel 1. Display current Antenna source 2: Display Channel Number 3: Display DTVSignal Srength 4: Display current Aspect Ratio olTV window 5: Display position status bar in file playback ortimeshifi 6: Display current Audio Outpm 7: Display resoILtion and currentkpect Ratio ofVideo source 8 Display current Computer System Time 9: Display current time ofTV by time-shit 10: Display DTV audio channel and select audio channel. On the displayed list‘ user can change the audio channel selection with a mouse-click. If not multi audio channel, the displayed list will not be activated. 11: Display audio format ofvideo source 12. Mule 13: Selection ofVideo input 14: Display and select a registered channel number The saved channels are changed by A or v 15: Help 16: HideTVwindow 17: Hide operation window (hmkey: Ctrl +1) 18: Display or hidechannel window 19 Open file 20: Slop 21: Pause (In activating the Time shiftjt pauses or play by toggling.) 22: Previousfln activating the Time shifi, it moves to the beginning position.) 23: Moves backward (In activating the Time shift. it moves back to a certain previous record position) 24: Moves forward (In activating the Time shilt, it moves back to a certaintime period ofnext record position) 25: Next (in activating theTime shill, it moves to Live mode) 26. Video Capture 27: Still Camure 28: Option 29: Aspect Ratio 0000 3. How to use OnAir USB HDTV 29 30 Zoum(Zuom Navigatuv) 31 Play List windnw 32: ColorAdJustment (Hot Key: WM) 33 The numeric hmons seleci channels (1-9), “7" is for 1urning one channel down, "+“ fov 1urning one channel up, and ”0K" bulton for saving a channel 34: Volume adjuslmem 30 ‘ USB HDTV GI' User’s Manual 3.1.4 ColorAdjustment Default: Clizk ofthe button reetoree program default value. Right-click on the mouse for the Color Adjustment window will display the following submenu. mghtnrsss Set Curent Setting as Default Contrast Set Curent Setting as Default and al other thannels Hue Saturation Set Default Color Adjustth Componerla (D): To restore default value from a user customized value, Set Current Setting as Default (S): To set a default value to the currert customized user color setting. Then in restoring the defaul value, this time registered value should be default. Set Current Selling as Default and all other channels: To set a default value to the current customized user settings In addition. rt appies to all clher channels. 3. How to use OnAir USB HDTV 31 3.1.5 PlayLlst In file playback, the user can register and use the specific files. In lhe playback IiQJhe user can add and use NPEGl ,2 and MPEG2 TS (jrp/tpfls) 0 ADD: To add files into play list, 0 Delete: To delete selected files from play list. 0 CIearAlt To delete all files from play list 32 i. USB HDTV GT User‘s Manual 3.1.6 Zoom Navigator User can zoom in a certain position ofthe video while playing TV. The zoom- in range is from default TV window (1III%) to a maximum of five times as large as the current TV view (SDD%). Also, -—,()— moving the scroll bar displaysthe zoom ratio in percentage. User can move and zoom the specific part of the screen arbitrarily. Also, by dragging the mouse, user can set the zoom ratio. Moves zoom-in position left, nght, above and below. Zoom out by 2596 per click (-) Zoom in or return to the original screen size Zoom in by 2596 per click (+)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2006:03:20 17:19:59+09:00 Modify Date : 2006:03:20 17:19:59+09:00 Metadata Date : 2006:03:20 17:19:51+09:00 Document ID : uuid:0070F7C6E9B7DA11897EB886AB71E8DC Instance ID : uuid:c2701afd-1e8b-46ee-90ed-4984c4ea869f Derived From Instance ID : uuid:a79a84fe-6cbf-40b3-8860-c060f622a20b Derived From Document ID : uuid:FF6FF7C6E9B7DA11897EB886AB71E8DC Format : application/postscript Title : untitled Page Count : 31EXIF Metadata provided by EXIF.tools