ONAIRSOLUTION ONAIRUSBHDTVGT USB HDTV Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	639270
Application ID	Z3t8UhYT1AKHKRdCDhJnnw==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.56kB (1731963 bits)
Date Submitted	2006-03-21 00:00:00
Date Available	2006-03-21 00:00:00
Creation Date	2006-03-20 17:19:59
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-03-20 17:19:59
Document Title	untitled

Tnis “manual mums hmto ms IJSB m'ml GT
This product supports Dolby Digital System.
This product was made under the license oi Dolby Laboratories,
"Dolby Pro Logic“ and Double D is the trademark 01 Dolby Laboratories
Ii you have any dlflicumes to use the products cv have any questions, piease Contact
our technical suppon ior service assis1ance
Tel - 52-1 553-5773
Fax : 324-703-3151
URL : vwwvonairsolmwmmkr
Email : suppons@mairsolmion.co.kr
Technical Support Oflica Hour
Mon-Fri:1D'DD AM ~17 00 PM
2" ,4" Sea 10 MAM-1500 PM
The oiiice is closed on every 1"',3" 5" Saturday 01 Holidays,
Com/rig!“
Each oi the companies involved in this manual copyrights the software and the
firmwae In [his Every software and firmware is protected under the intellectual
property right, treaty, computer prowam preservation. copyright law and lrternational
copyrlgM convenllon You cannon copy and excerpt this manual wnhom wmlsslon.
w-mnty
We warem our producls ior a period oi one year from the date oi purchase
This device IS already registered on Electro - Magnetic Compatibility,
OnAir USB HDTV GT is available everywhere
CDWfiflll ©2005 onAl'l'Solulinn Co., Ltd. All Right Ressved.
Mlfi in Rule-
FCC Information
This dei/ice complies With Part 15 of the FCC Results. Operation is subject to the
followmg two conditions:
(1) This DeVice may not cause harmful interface, and
(Z) This deVice must accept any Interference received, including interference that
may cause undefined operation,
Note: This equipment has been tested and found to comply With the limits
for CLASS B digital demce, pursuant to Part 15 of FCC Rules. These
limits are deSigned to provide reasonable protection against harmful
interference when the equipment I5 operated in a commercial enVironment.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance With the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference Will not occur in a particular installation. If this
equipment does cause harmful interference to radio or teleVision reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try correct the interference by one or more of the followmg
measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the eqmpment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could v0id the user's authority to
operate the equipment
Important Safety Notice
Warning (Always comply Withthese instructions to prevent the risk of injuries
and the damage of youLsystem.) It IS strongly recommend you to read the
user's manual before you use the product. It is stroneg recommended that
you carefully readthismanual betore using your product.
fThere are two waming symbols - waming and notice. Please rela'
to the lollowing definition ot "wanting“ and "notice“
fin“, Intended to alert the userto the possible serious injury
or death byyour Violation ofthe |n51ruct|on
f Intended to alert the userto the possible minor injury or
product damage by yourwolation olthe instruction
{it Cautionto be secured against a specific condition.
The damage due to the user’s lawlessness will diarge the user for
mum
A“.
An abnormal power cable,
AM.
Do not pull the plug by
Drcing it in. Do not (a uch 8
Am
Please insed plug lully into
the Bullet LDuse
plug, and oulet may
cause electric shock or plug and an oulet with a
vwet hand whlch mayv
cause electric shock or
connection may cause lire,
fire.
Do ncfi bend the power Do not overload the outlet. Do nm put any tablecloth
cable excessively Cr get it Do nm conned the in the vemilalcln holes For
squeezed by the heavy additional outlet on the better veriilalion
things, whlch may cause maln outlet, whlch may lt may rest! |n rrrethruugh
eleMrlcshockovflre cause eleeinc shock or uncreasmg Ihe unner
ire. temperature
Please infial this device
on the flat place.
Overturned mum
may cause mechanical
trouble or iwv.
lle
AM
Don't use this device near
the combusfibles and the
inllammables whlch may
cause live L1 explosion.
,&w
Don! insiall this device be
side lactating objects such
as candles. mosquito
coils, and cigaremes which
' may cause me
,.
‘v
l-o
\ x
it?
AL
Please be aware 01 rain
infiltration no the house
when using an exterior
antenna,
’ Am
Be sure to unplug when
cleaning the device. it may
result 11 electric shock or
Vlre
’
vb
G69}:
A.“
Please “stall antenna |ar
sway the high-
tension cahl e or
"am
communication cable ll
. not. it may cause electric
shock or fire
fi)
eff
Am
Dont insert chopsticks,
Wives, and gimlets into a
ventilation opening. Al, or
ANT terminals ThlS may
cause electric shock 01 '
tire.
“3A
lei?
Unplug when unused lcr
long periods oi time This
may cause eleclnc shock
or five,
Keep the device am or
children's reach This may
cause electric shock,
l r
iiéie
When the device emits
Smoke And bad odor,
please unplug
immediately Then give a
call tn technical support.
This may cause elec1ric
shock or tire.
Never op en,
this
repair and
modify device
arbitrarily This may cause
electric shock and tire. For
afierseles service. please
call technical support.
GUD.9100 lGP 5750 580045900 520185005800
Mohlle PC
Mohil'ny Radeun7530,9000,5800, 3 Gefuree 4 GO 420 ,440 ,480
9700.9330X200X600X700 ' Geforce FX GO 510352005600,
”5650 5700 8200 86m 6800 Go 1
C Mininum system requirement(Nm supporting DXVA)
0 VGA .AGF'4X with 32MEI Vldeo memory or higher (SAME or higher
is recommended)
CPU Penllum41.EGHz or higher/AMDAthlnn XP 2C00+ur higher
is required
0 Memory. 120MB (256MB Recommended)
16 G. OnAir USB HDTV GT User’s Manual
1.4 Parts Details
oPower LED :The I|ght's on aner pluggmg OnAlr USB HDTV and
connectmg to your computer by USB cable
OlR :For using remote control, this IR part receivesthe input signal
OHDTV Signal LED zNo Digital TVsignaI turns its light on.
OUSB Port: connectedto USB 20 Port ofsystem by USB cable
QATSCI NTSCAntenna Input: connects to cable or terrestrial antenna
Ammunulwmewm
QVideo Input .This is video input port ofcomposite format and connects
to Video out part of composite devices such as normal VCR, video
camera. and camcorder
QS-Video Input :This is S-Video input port of S-Video and connects to 9-
video out port such as Super-VHS VTR. SEGA Saturn, and SONY
PlaySatiun
oAudio Input [LVtRj :/-\s the stereo input port of V|deo, th|s port
connects to Audio out port of normal VCR and other devices to OnAir
USElTV
2.Installation 17
2 Installation
2.1 Installation Checklist
Please read the installation guide a wwwonairsolutionco kr first. and then
install this device in your pc,
2.1.1 Vlfindes XP Sewioe Pack1nr higher
First, right-click on the mouse to open the "Properties" from the desktop
menu of "My Computer", then check out if the current operating system is
MicrosofiVVindows XP Service Pack 1 or 2. If "MicrosofiWindowsXP Serwce
Pack 1" is not installed in your operation system. then please download and
install the ‘Servrce Pack 1" from the Windows Update on line. In case of
Windows Servrce pack 2. you don’t have to update.
Please openMicrosofl InternetExplorer, and choosethe tool menu on thetop
ofmenu bar and click the "windows update" and run the update scan lithe
update scan is completed, there wil be update scan result displayed. From
the update scan result list, please download the Microsoft Windows XP
Service Pack 1 from “Critical Updates and Service Pack" and install it.
2.1.2 “5821! Patch (H at Fix]
Because the USB 2.0 is a new devrce, even Microsoit Windows XP Service
Pack 1 has the USB 2.0 Device Driver hug. Forthe users oiSerwce Pack 2,
no addnional patch is necessary
At first, please confirm ifthe 'Windows XP Hot Fix - KBS22BE13" is installed on
your system from the "program add) remove" under control panel. If your
system has already installed this, your system had completed the patch of
USBZD Devrce Driver Bug. If your system has not installed_this, please open
Microsott lnternet Explorer, and choose the tool menu on the top of menu bar
and click the "windows update“ and runthe update scan. lithe update scan
is completedthere will be a Iis1 of update scan result displayed. From the list
of update scan result, please find the recommended "andows XP SP1
update “(3322603)" underWindows XP menu and installit on yoursystem.
This Hot Fix patch program is released by Microsoit to fix a failure to
recognizing USB 2.0 device.
18 E USB HDTV GT User‘s Manual
2.2 Hardware Installation
OnA|r USB HDTV GT ls an external HDTV device that can be connected Wlth
personal computer or laptop through USEIZD port. Please plug in the
supplied power adaptor into the hardware. and connect OnAir USB HDTV
with USBZD port of desktop or laptop compmerathrough USB cable.
m.mummmmn
mmmmnmmum
ammuwmwnum
2.Installztion 19
2.3 OnAIr USB HDTV GT Devioe Driver Insullatlon
Please insert the provided mstallatxon CD into yoursystem's CDROM drive.
The installation CD will aLtomatically start the installation. Fromthe displayed
product list. select the driver installation under Onair USB HDTV and install
Drive as follows. If the installat|on CD does not auto-run and display the
product list, please run "Installerexe' file on your CD-ROM throuthWndow
Explorer“
2.3.1 Driver Installation
1. This window is for the user to
select the language of the
system. It selected "English". the
driver installation system menu
displays in English. Please click
[OK] afier selecting "English".
2 This window notice displays
when OnAir USB HDTV is
‘m. already connected with the
;=-w=smmzmm=:s:-- system before driver installation,
which means the user will he
m M able to install the driver for USB
HDTV. Finally, ll OnAir USB
HDTV is connected with system,
please disconnect this device
from USB port
20 i usn Huwcr Inn’s Manual
-3. Guam pmgim uni puss
[Nemfwhmerhstallaflum
4A II tha props-bu lav Insbilfion is
veady, muse out [Mead] to proceed
hlh (he MUCH
54 Than diva! Mimi)" is M.
Press [OK] and m OnA‘l USE
Tanhflnw.
=m~glrnmhu
mum-"nu. in man.-
one
..-wm..:..m...4_.. ...
:,.u..u.m...... m. m,-
2.Instzllztion 21
.Ycu should proceed wth the
installation by Why the “Continue
Anyway" option, Irmellhg the driver
wil nm 51131 the performance 131
your computer, Germany, this
message is received during the
insulation Into a Mum/vs XP or
Windows 2000 environmem Again,
proceed with the insulation by
selening (he Cumhue Anyway
option
. it hes been ready m Ins1ai| Onelr
LEE HDTV Driver on yuur system.
Ailey you have clicked the Finish
bultun {D finish Sdup,
22 E USB HDTVGT User‘s Manual
2.4 OnAIr USB HDTV GTI-lppllmllon Somme Installation
The OnAir USE! HDTV GT application soflware installation is plowded in
given CD ROM.
Please insert the provided installation CD into yoursystem's CD-ROM drive.
The installation CD will automatically start the installation, From the
displayed product list. please select the application soliware under OnAir
USE HDTV v ll’the installation CD does not emu-run and display the product
list, please run“lnstaller,exe"file onyouv CD-ROM by 'Window Explorer"
1. it will start the hstallation
u...........»......,. program at OnAlr use HDTV
mum
;:'va-;-f;=armuln~:rwl« application sultware
2. Please seled the lnlder that
a_...__..... .
u.._,......._ program will be installed ll you
maunnmmmnnhu—
......_......_r......_.-....u.._ would like 10 select the mher
folder, please press [Browse]
button. To install program at
selened folder, please press
[Next] lur installation.
_.__4__...-.-........,...._
mun—n.
Pfifimmfi
v hum-um...“
p awn-mun...—
» (Manama-mu an
E moan-u...-
mum—mnu—umnu—tniu
4mm“ (hid-ate“
_.-._¢nm;.m
mm...
3.
installation 23
user can select some items
(0 be installed. it is
recommended fio install
software items. For next step,
please press [Next].
Ins1a|lShleld Wllavd finished the
insqauatiun ul application
soflweve fov ‘OnAir USB
H D TV".
The InslaIShieId Wizard
slans. and directs you
through the reel of the
installation process as
described below.
24 ‘ USB HDTV GT User's Manual
“ham—Mum
u n.—
mic—n!
mun-u.—
munmhnq—m
maumqu-qn.“
me E.
At ths Wm Window. cfick
Next.
Read the license ageement,
then click Yes il yuu agree to
meterms.
At the Product Amivetion
screen. step 1 of 2, ante: (he
rsqulrsd moment)", then nick
Ilekt.
n.._-_._..............._ m-.--
.......~.
nu— i
1111! E!
.._._..... ‘
w.“ ..“M. \
wanna--
cum-mu. E1
“hum-sum tuba-«BA
Mn“. whamfl.‘
fl a.
mmilonn ,
installation 25
At the Product Anivatlnn
screen, step 2 ol 2. enter the
amivatlcfn code,then click mm
10. At the Choose Destination
11.
window, browse in locate the
folder where you want the
NVIDIA DVD Decoder files
unfialled, or jusi use the devaun
location and 050k um.
Setup proceeds in ins1a|| the
files
At the lnstaIIShizld Wizard
Complete Window, tick Finish
26 ‘ USB HDTV GT User's Manual
3. How to use OnAlr USB HD'IV GT
3.1 Swen Components
nvwmow]
[DTV Operation Camml Windmfll [Channel Vlfinduw]
3. "mm use OnAir USB HDTV 27
[Color Adjustment] Play List] [Zoom Navigator]
-|| x-w * .
3.1.1'IV‘MmIow
It displays a video source input such as Digital TV, Analog TV, “den, and S-
Video.
0 Hide: Ii hides the TVwinduw wilhnu closing the TV program.
0 Class: I! closssthsTmegram.
Righbdck onlhe mouse (Dime TV windnwwl display me lollow'n; submenu.
3.1.2 Operatinn Control “fidnw and Channel Windw
MBC DTV
an!) “null-nu
28
.1.
0000000000 g
00000 0 0 00000000 0000
a:
Q USB HDTV GT User‘s Manual
Button description on Operation Control Wldow and Channel
1. Display current Antenna source
2: Display Channel Number
3: Display DTVSignal Srength
4: Display current Aspect Ratio olTV window
5: Display position status bar in file playback ortimeshifi
6: Display current Audio Outpm
7: Display resoILtion and currentkpect Ratio ofVideo source
8 Display current Computer System Time
9: Display current time ofTV by time-shit
10: Display DTV audio channel and select audio channel. On the
displayed list‘ user can change the audio channel selection with a
mouse-click. If not multi audio channel, the displayed list will not be
activated.
11: Display audio format ofvideo source
12. Mule
13: Selection ofVideo input
14: Display and select a registered channel number The saved
channels are changed by A or v
15: Help
16: HideTVwindow
17: Hide operation window (hmkey: Ctrl +1)
18: Display or hidechannel window
19 Open file
20: Slop
21: Pause (In activating the Time shiftjt pauses or play by toggling.)
22: Previousfln activating the Time shifi, it moves to the beginning
position.)
23: Moves backward (In activating the Time shift. it moves back to a
certain previous record position)
24: Moves forward (In activating the Time shilt, it moves back to a
certaintime period ofnext record position)
25: Next (in activating theTime shill, it moves to Live mode)
26. Video Capture
27: Still Camure
28: Option
29: Aspect Ratio
0000
3. How to use OnAir USB HDTV 29
30 Zoum(Zuom Navigatuv)
31 Play List windnw
32: ColorAdJustment (Hot Key: WM)
33 The numeric hmons seleci channels (1-9), “7" is for 1urning one
channel down, "+“ fov 1urning one channel up, and ”0K" bulton for
saving a channel
34: Volume adjuslmem
30
‘ USB HDTV GI' User’s Manual
3.1.4 ColorAdjustment
Default: Clizk ofthe button reetoree program default value.
Right-click on the mouse for the Color Adjustment window will display
the following submenu.
mghtnrsss
Set Curent Setting as Default Contrast
Set Curent Setting as Default and al other thannels Hue
Saturation
Set Default Color Adjustth Componerla (D): To restore default value
from a user customized value,
Set Current Setting as Default (S): To set a default value to the currert
customized user color setting. Then in restoring the defaul value, this
time registered value should be default.
Set Current Selling as Default and all other channels: To set a default
value to the current customized user settings In addition. rt appies to
all clher channels.
3. How to use OnAir USB HDTV 31
3.1.5 PlayLlst
In file playback, the user can register and use the specific files. In lhe
playback IiQJhe user can add and use NPEGl ,2 and MPEG2 TS (jrp/tpfls)
0 ADD: To add files into play list,
0 Delete: To delete selected files from play list.
0 CIearAlt To delete all files from play list
32 i. USB HDTV GT User‘s Manual
3.1.6 Zoom Navigator
User can zoom in a certain position ofthe video while playing TV. The zoom-
in range is from default TV window (1III%) to a maximum of five times as
large as the current TV view (SDD%). Also, -—,()— moving the scroll bar
displaysthe zoom ratio in percentage.
User can move and zoom the specific part of the screen
arbitrarily. Also, by dragging the mouse, user can set the
zoom ratio.
Moves zoom-in position left, nght, above and below.
Zoom out by 2596 per click (-)
Zoom in or return to the original screen size
Zoom in by 2596 per click (+)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:03:20 17:19:59+09:00
Modify Date                     : 2006:03:20 17:19:59+09:00
Metadata Date                   : 2006:03:20 17:19:51+09:00
Document ID                     : uuid:0070F7C6E9B7DA11897EB886AB71E8DC
Instance ID                     : uuid:c2701afd-1e8b-46ee-90ed-4984c4ea869f
Derived From Instance ID        : uuid:a79a84fe-6cbf-40b3-8860-c060f622a20b
Derived From Document ID        : uuid:FF6FF7C6E9B7DA11897EB886AB71E8DC
Format                          : application/postscript
Title                           : untitled
Page Count                      : 31

EXIF Metadata provided by EXIF.tools