ADTRAN 424RG50X Wireless Mini PCI User Manual Module

Download:
Mirror Download [FCC.gov]
Document ID	3338166
Application ID	nYsud5IldjXfKV7yRsWuDA==
Document Description	User Manual Module
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.03kB (262823 bits)
Date Submitted	2017-03-29 00:00:00
Date Available	2017-09-26 00:00:00
Creation Date	2017-03-17 10:27:09
Producing Software	Acrobat Distiller 15.0 (Windows)
Document Lastmod	2017-03-17 10:27:09
Document Title	Microsoft Word - Wireless Card Installation Guide-XW866G for 630719 (5G 4x4)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Elaine

Wireless Card Installation Guide
Card name: XW866G 4T4R 5G Radio Daughter card
Model/PN: 33500006x‐E (x=0~9, a~z, A~Z, blank, “‐” or “+”)
Description:
 802.11 a/an/ac support on 5 GHz radio with 4X4 MIMO antenna design
 The 5GHz radio SHALL support the frequency band specified in
802.11b/g/n.
 The 5GHz radio SHALL incorporate a 4x4 MIMO antenna arrangement with
4 spatial streams
 The 5GHz radio SHALL support 20 and 40 MHz channels on the 5GHz
radio
1. Installation way
Step1: Find the board and make sure the quality
Step2: Assemble XW866G in the miniPCIe socket.
Step3: Assemble with necessary screws. 2pcs per unit.
Step4: Assemble the antenna, 2pcs per unit
Step5 Assemble the top cover
Step6: Log in the unit to setup the configuration, IP: 192.168.1.1
2. Safety and Regulatory Compliance Notice
Module FCC ID： FCC: HDC424RG50X
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions,
may
cause
harmful
interference
to
radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
RSS-GEN 8.4 Notice for Canada
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC RSS-102 Notice for Canada
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20cm de distance entre la source de rayonnement et votre corps
Digital apparatus (ICES003)
CAN ICES-3 (B)/NMB-3(B)
“Contains transmitter module IC: 2250A-424RG50X.
Contient le module d'émission IC: 2250A‐424RG50X

---

Source Exif Data:

EXIF Metadata provided by EXIF.tools