ASUSTeK Computer W5G00UGPZ50 NOTEBOOK P.C. BLUETOOTH DEVICE User Manual USERS MANUAL 5

Download:
Mirror Download [FCC.gov]
Document ID	494444
Application ID	mNB6/krYMZFIHQ8bYZaDYg==
Document Description	USERS MANUAL 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	309.31kB (3866347 bits)
Date Submitted	2004-12-07 00:00:00
Date Available	2004-12-03 00:00:00
Creation Date	2004-12-03 08:52:40
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-12-03 08:52:59
Document Title	USERS MANUAL 5

Quick Start Guide - Introduction
第 64 頁，共 160 頁
The [Fax Console] window will appear.
3. In the [Fax Console] window, double -click on the fax that has arrived
An image of the received fax will be displayed.
Related topic: " Sending a fax"
Printing
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 65 頁，共 160 頁
This section describes how to use a Bluetooth -compatible printer for printing.
Types of printer functions
When printing using Bluetooth, the methods for configuring and using the printer will vary
with the corresponding profile.
Profile
Bluetooth Settings
Operation
SPP
You must register the
printer in Bluetooth
Settings
Allows you to print from various applications, as
with ordinary cable-connected printers.
→"Printing document and images"
OPP (*2)
Not required
Allows you to print business card data directly.
→"Printing business card data"
BIP
Not required
Allows you to print image data directly.
→"Printing images directly from a digital camera
or other device"
HCRP (*1)
Note
(*1) The majority of Bluetooth -compatible printers support HCRP.
If you have selected Express Mode, HCRP will be chosen as the default profile. If the
printer does not support HCRP, then SPP will be the next choice.
(*2) The printing of business cards using OPP complies exclusively with the business
card (vCARD) standard.
Printing documents and images
[HCRP] [SPP]
This section describes how to print using a Bluetooth -compatible printer.
→Setting up the printer
→Printing
Important
Please ensure that any printer -specific drivers have been installed on the PC before you
have established a Bluetooth connection.
A Bluetooth passkey (PIN code) is required for you to connect to the printer. Please
make a note of your Bluetooth passkey before you start the set -up process.
S tti
th
i t
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 66 頁，共 160 頁
Setting up the printer
Procedure
1. Turn on the printer
2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth
Settings], and then click on [New Connection] from the active [Bluetooth
Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection
Wizard)] window will appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next]
button
The [Add New Connection Wizard (Searching for Bluetooth devices)] window
will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 67 頁，共 160 頁
Once the program has finished searching for the devices, the [Add New
Connection Wizard (Device Selection)] window will appear.
4. Select the device name of the printer from [Device List], and then click on the
[Next] button
The [Add New Connection Wizard (Searching for Services)] window will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 68 頁，共 160 頁
5. If you are connecting to the printer for the first time, enter the passkey for the
device from the [Bluetooth Passkey (PIN Code)] window, and then click on the
[OK] button.
Once the services have been detected successfully, connection to the device and
creation of the HCRP port will be performed automatically.
If you have not yet installed a printer, a message prompting you to install a printer
will appear.
6. Click on the [OK] button
The [Add Printer Wizard (Starting the Add Printer Wizard)] window will appear.
7. Click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 69 頁，共 160 頁
The [Add Printer Wizard (Local Printer or Network Printer)] window will appear.
8. Select "Local printer attached to this computer", remove the check next to
"Automatically detect and install my Plug and Play printer", and then click on the
[Next] button
The [Add Printer Wizard (Select Printer Port)] window will appear.
9. Select the desired port, and then click on the [Next] button
The [Add Printer Wizard (Install Printer Software)] window will appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 70 頁，共 160 頁
10. Select the [Manufacturer] and [Printer] as pertains to the printer to be installed, or
click on the [Use Device] button, and then click on the [Next] button
Please install the printer according to the instructions in the windows that follow.
Once installation is complete, a message of confirmation will appear in the [Add
New Connection Wizard (Printer Settings)] window.
11. Click on [Next]
The [Add New Connection Wizard (Connection Name Settings)] window will
appear.
12. Enter the type and name of the icon displayed after registration, and then click on
the [Next] button
Please click on the [Next] button if you are satisfied with the settings.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 71 頁，共 160 頁
Note
You can change the connection icon and icon name.
→"Changing the connection icon name "
→"Changing the connection icon "
Printing
Try to print from the message pad.
1. Click [File]→[Print]
The [Print] screen will appear.
2. Select wireless printer from under [Select Printer], and then click on the [Print]
button
Printing will commence.
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 72 頁，共 160 頁
If you have connected to a printer using HCRP or SPP profiles, all future Bluetooth
connections to that printer will be established automatically once you have printed a
document from your PC.
Printing images directly from a digital camera or other device
[BIP]
If you have a printer that supports BIP (Basic Imaging Profile), you can send images dire
to a printer to be printed out, without having to perform any special set -up procedure.
→Printing image files on a printer (using icons)
→Printing image files on a printer (by right -clicking the mouse)
Note
Below is a list of file types (extensions) of images that can be printed out directly.
Bitmap (*.bmp)
JPEG (*.jpg; *.jpeg)
PNG (*.png)
Procedure
■Printing image files on a printer (using icons)
1. Turn on the printer
2. Click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, open Explorer and click on the Bluetooth Information Excha
folder for the same result.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 73 頁，共 160 頁
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image Transfer] icon
A list of devices will appear in the [Image Transfer] window.
Note
If your desired printer does not appear in the list, please confirm that the pr
has been turned on, and then click on [Bluetooth] →[Search Devices]
A device search will be performed.
4. Drag and drop the file to be sent on top of the icon of the destination printer
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 74 頁，共 160 頁
The file will be sent to the printer.
If the file has been sent to the printer successfully, the message below will appea
the image will be printed out. Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the printing procedure.
Note
If the printer does not support the BIP profile, the message below will appe
■Printing image files to a printer (by right -clicking the mouse)
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 75 頁，共 160 頁
1. Turn on the printer
2. Right-click on the file to be sent, and then click on the destination printer under [
Bluetooth]
Note
If your desired device does not appear in the list, please confirm that the de
has been turned on, and then click on [to Bluetooth] →[Search Other Devi
Once the device has been detected, the message below will appear. Please s
the destination device, and click on the [Send] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 76 頁，共 160 頁
A window indicating that the file is being sent to the printer will appear.
If the file has been sent to the printer successfully, the message below will appea
the image will be printed out. Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the printing procedure.
Note
If the printer does not support the BIP profile, the message below will appe
Printing business card data
[OPP]
If you have a printer that supports OPP (Object Push Profile), you can directly send busin
card data that conforms to the "vCard" standard to a printer and print it out.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 77 頁，共 160 頁
→Printing business card data (using icons)
→Printing business card data (by right -clicking the mouse)
Procedure
■Printing business card data (using icons)
1. Turn on the printer
2. Click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, open Explorer and click on the Bluetooth Information Exch
folder for the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 78 頁，共 160 頁
Here, the image will be sent to the target printer.
Note
If your desired printer does not appear in the list, please confirm that the pr
has been turned on, and then click on [Bluetooth] →[Search Devices]
A device search will be performed.
4. Drag and drop the business card data to be sent on top of the icon of the destinati
printer
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 79 頁，共 160 頁
The business card will be sent to the printer.
If the business card has been sent to the printer successfully, the message below w
appear, and the image will be printed out. Please click on the [OK] button.
The message below will appear if the business card transmission was unsuccessfu
Please click on the [OK] button to close the message, and repeat the printing
procedure.
■Printing business card data (by right -clicking the mouse)
1. Turn on the printer
2. Right-click on the business card data to be sent, and then click on the destination
printer under [to Bluetooth]
Note
If your desired device does not appear in the list, please confirm that the de
has been turned on, and then click on [to Bluetooth] →[Search Other Devi
Once the device has been detected, the message below will appear. Please s
the destination device, and click on the [Send] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 80 頁，共 160 頁
The business card will be sent to the printer.
If the business card has been sent to the printer successfully, the message below w
appear, and the image will be printed out. Please click on the [OK] button.
The message below will appear if the business card transmission was unsuccessfu
Please click on the [OK] button to close the message, and repeat the printing
procedure.
Listening to music using the stereo headphones
【GAVDP】
【A2DP】 【AVRCP】
This section describes how to use the stereo headphones to listen to your favourite music or o
audio files stored on your PC.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 81 頁，共 160 頁
→Configuring the stereo headphones
→Connecting to the stereo headphones
→Listening to music or other audio files
→Playing music using remote control
→Copyright protection function
Configuring the stereo headphones
Procedure
1. Right-click on the Bluetooth icon in the task tray, and click on [Add New
Connection].
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth
Settings], and then click on [New Connection] from the [Bluetooth Settings
screen that has opened.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizar
will appear.
2. Switch ON the stereo headphones and activate "Discoverable" mode
Please refer to the user guide for the stereo headphones for further information on
how to operate them.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] butt
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 82 頁，共 160 頁
The [Add New Connection Wizard (Searching for Bluetooth Devices)] screen wi
appear.
Once the search for the devices has ended, the [Add New Connection Wizard (Se
Device)] screen will appear.
4. Select the device name of the stereo headphones from the list, and click on the [N
button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 83 頁，共 160 頁
The [Add New Connection Wizard (Searching for Services)] screen will appear.
5. Configure the type and name of the icon to appear once registration is complete,
click on the [Next] button
Please click the [Next] button once you are satisfied with the configuration.
The [Add New Connection Wizard (Configure Connection Name)] screen will
appear.
6. Click on the [Finish] button
The settings will be registered, and the icon will appear on the [Bluetooth Setting
screen.
Connecting to the stereo headphones
You can connect to the stereo headphones from the icon registered in [Bluetooth Settings
Please refer to the user guide for information on how to make a connection from the stere
headphones.
Important
Please close the following audio applications before any connection is made betwe
your stereo headphones and PC.
Music/video playback applications
e-Conferencing applications
Voice-recognition applications
Please finish connecting the stereo headphones before launching any of these
applications.
Listening to music or other audio files
Pl i
th
di fil
PC
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 84 頁，共 160 頁
1. Playing music or other audio files on your PC
Important
Please confirm the points below if you are unable to hear anything despite
having properly connected the stereo headphones.
Click [Start]→[All Programs]→[Accessories]→[Entertainment]→[Volum
Control].
Remove the tick next to [Mute] if it has been ticked. If the volume is at its
lowest setting, please adjust it to an appropriate level.
Music playback may be interrupted if other Bluetooth devices are currently
connected to your PC. When you are listening to music, it is recommended
the stereo headphones be the only connected device.
Music playback may be interrupted if you are some distance away from the
or if there are any obstructions between you and the PC.
If you are unable to hear any sound out of your stereo headphones while m
or audio is currently playing in a related application, please stop the files be
played, open [Sounds and Audio Devices] from the Control Panel, and chan
the default device to "Toshiba Bluetooth Wave."
If you are still unable to hear any sound from the stereo headphones even a
having set "Toshiba Bluetooth Wave" as the default device, please re -laun
application.
2. Finishing listening to music and disconnecting
1. Right-click on the icon for the currently connected mode from [Bluetooth
Settings] on your PC, and click on "Disconnect."
A message confirming the disconnection may appear.
2. Click on the "Yes" button after having followed the instructions in the
message.
The icon will indicate that the device has been disconnected.
Important
Please close the following audio applications before you disconnect the ster
headphones from your PC:
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 85 頁，共 160 頁
„
„
„
Music/video playback applications
e-Conferencing applications
Voice-recognition applications
Please completely disconnect the stereo headphones before launching any o
these applications.
Please refer to the user guide for information on terminating a connection f
the stereo headphones.
Playing music using remote control
Music applications and video playback applications installed on your PC
(e.g.,"Windows Media Player 9" and "InterVideo WinDVD") may be operated
with the remote control button/switch on your stereo headphones.
The remote control used with the stereo headphones must be compliant with
the Bluetooth AVRCP profile. Please refer to the headphones user guide for
further information.
You can configure the application to be operated using the switch/button
according to the following procedure.
Procedure
1. Double-click on the Bluetooth icon in the taskbar
Launches "Bluetooth Settings."
2. Click on [Bluetooth] →[Select AV Player] from the menu bar
The [Select AV Player] screen will appear.
3. Select the application, and click on the [OK] button
The functions and switch/button that can be operated may differ depending on
the application used for music/video playback as well as the version.
The procedure below can be performed in order to change the position where
the receive command is displayed or to not have the command displayed.
Procedure
1. Double-click on the Bluetooth icon in the taskbar
Launches "Bluetooth Settings."
2. Click on [Bluetooth] →[Select AV Player] from the menu bar.
The [Select AV Player] screen will appear.
3. Select the appropriate item from the pull -down menu of positions
where the receive command is to be displayed, and then click on the
[OK] button.
If the receive command appears but does not function properly, sometimes
the problem may be rectified by changing the setting to "Do not display."
The commands supported by this application are shown below. Please refer to
the headphone user guide for commands that are supported by the stereo
headphones. Problems with operation may be encountered with certain
versions of "Windows Media Player 9" and "InterVideo WinDVD."
[Windows Media Player 9]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 86 頁，共 160 頁
[Windows Media Player 9]
Play
Stop
Pause
Next
Previous
Fast forward
Rewind
[InterVideo WinDVD]
Play
Stop
Pause
Next chapter
Previous chapter
Fast Forward
Fast Backward
Up
Down
Left
Right
Select
Root menu
Angle
Copyright protection function
A copyright protection function is supported according to the SCMS -T format
as defined in the Bluetooth specifications. Follow the configuration procedure
below to establish connections only with devices that support this function.
Procedure
1. Double-click on the Bluetooth icon in the task tray.
Launches "Bluetooth Settings."
2. Select [Bluetooth] from the menu, and click on [Copyright Protection Setting
The copyright protection dialog will appear.
3. Tick the box next to "Only connect to devices that are copyright -protected u
the SCMS-T format," and click on the OK button.
Using a wireless keyboard
[HID]
This section describes how to connect a Bluetooth -compatible keyboard to a PC.
S tti
th
i l
k b
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 87 頁，共 160 頁
Setting up the wireless keyboard
Procedure
1. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth Se
and then click on [New Connection] from the active [Bluetooth Settings]
window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizar
window will appear.
2. Confirm that [Express Mode] has been selected, and then click on the [Next] butt
The [Add New Connection Wizard (Searching for Bluetooth devices)] window w
appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 88 頁，共 160 頁
Once the program has finished searching for the devices, the [Add New Connecti
Wizard (Device Selection)] window will appear.
3. Select the device name of the keyboard from [Device List], and then click on the
[Next] button
The [Add New Connection Wizard (Searching for Services)] window will appear
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 89 頁，共 160 頁
4. Use the wireless keyboard to enter the numbers that appear in [Bluetooth Passke
Code)], and then hit the [Enter] key
Once the program has detected the services successfully, connection to the device
registration of settings information will be performed automatically.
The [Add New Connection Wizard (Connection Name Settings)] window will ap
5. Enter the type and name of the icon displayed after registration, and then click on
[Next] button
Please click on the [Next] button if you are satisfied with the settings.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 90 頁，共 160 頁
Note
You can change the connection icon and icon name.
→"Changing a connection icon name "
→"Changing a connection icon "
The [Add New Connection Wizard (Completing the Add New Connection Wizar
window will appear.
6. Click on the [Finish] button
The settings information will be registered, and an icon will appear in the [Blueto
Settings] window.
Note
Pressing any key on the wireless keyboard will automatically connect it to the PC
thereafter.
Please connect manually if automatic connection is unsuccessful.
Using a wireless mouse [HID]
This section describes how to connect a Bluetooth -compatible mouse to a PC.
Setting up the wireless mouse
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 91 頁，共 160 頁
Procedure
1. Turn on the wireless mouse, and set it to be connectable via Bluetooth
Please refer to the instruction manual for details on how to operate the mouse.
2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
Note
Alternatively, click [Start] →[All Programs]→[Bluetooth]→[Bluetooth Se
and then click on [New Connection] from the active [Bluetooth Settings]
window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizar
window will appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] butt
The [Add New Connection Wizard (Searching for Bluetooth devices)] window w
appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 92 頁，共 160 頁
Once the program has finished searching for the devices, the [Add New Connecti
Wizard (Device Selection)] window will appear.
4. Select the device name of the mouse from [Device List], and then click on the [N
button
The [Add New Connection Wizard (Searching for Services)] window will appear
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 93 頁，共 160 頁
A message confirming a device connection will appear.
5. Click on the [OK] button
The [Add New Connection Wizard (Connection Name Settings)] window will ap
6. Enter the type and name of the icon displayed after registration, and then click on
[Next] button
Please click on the [Next] button if you are satisfied with the settings.
Note
Please use this window to change the connection name and icon.
- Changing the connection icon name
- Changing the connection icon
The [Add New Connection Wizard (Completing the Add New Connection Wizar
window will appear.
7. Click on the [Finish] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 94 頁，共 160 頁
The settings information will be have been registered, and an icon will appear in
[Bluetooth Settings] window.
Note
Clicking on one of the mouse buttons or otherwise operating it will
automatically connect it to the PC thereafter. Please connect manually if
automatic connection is unsuccessful.
Exchanging files with a PC or PDA
[FTP]
You can send and receive files other than business card data with a Bluetooth -enabled P
PDA.
Use "File transfer" in the Bluetooth Information Exchanger to exchange files.
Note
The same operations will be valid as long as the PC and PDA support the FTP prof
"File transfer" cannot be used to send or receive business card data. Please instead
"Object Push" to perform these activities.
→Sending files to a PC or PDA (using icons)
→Sending files to a PC or PDA (by right -clicking the mouse)
→Receiving files from a PC or PDA
Procedure
■Sending files to a PC or PDA (using icons)
1. Turn on the PC or PDA
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 95 頁，共 160 頁
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [File transfer] icon
A list of devices will appear in the [File transfer] window.
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 96 頁，共 160 頁
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
You can also use "Image transfer" when sending individual image files.
4. Use the mouse to drag and drop the file you wish to send over the destination ico
In this case, the file will be sent to a PC named "PC -1".
Note
When using "File transfer", you can send individual files as well as entire
folders.
5. Confirm that the file is being sent
The file will be sent to the PC.
Note
When sending files using "File transfer", a message requesting permission t
receive the files may appear on the destination (receiving) device. The cont
the message will vary with the Bluetooth software installed on the destinati
device, so please be sure to follow the instructions provided.
If you are using the Bluetooth Utility, a message similar to the one below w
appear.
If the file has been sent successfully, the message below will appear.
Please click on the [OK] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 97 頁，共 160 頁
The message below will appear if the file transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Files that have been sent will be saved in a file transfer shared folder on the
destination device.
Additionally, with "File transfer", you can open the shared folder on the
destination device using Explorer, specify a subfolder, and then send the fil
there.
You can use Properties in the Bluetooth Information Exchanger to change
location of the "Shared folder" on the hard drive.
■Sending files to a PC or PDA (by right -clicking the mouse)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the file you wish to send, and then select its destination from [to
Bluetooth]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 98 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [to Bluetooth] →[Search other devices]
Once the devices have been detected, the message below will appear. Pleas
select the destination device, and then click on the [Send] button.
3. Confirm that the file is being sent
The file will be sent to the PC.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 99 頁，共 160 頁
Note
When sending files using "File transfer", a message requesting permission t
receive the files may appear on the destination (receiving) device. The cont
the message will vary with the Bluetooth software installed on the destinati
device, so please be sure to follow the instructions provided.
If you are using the Bluetooth Utility, a message similar to the one below w
appear.
If the file has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful.
Please click on the [OK] button to close the message, and then repeat the procedu
Note
Files that have been sent will be saved in a file transfer shared folder on the
destination device.
■Receiving files from a PC or PDA
Your PC is able to receive files that have been saved in the shared folder on the destinati
PC or PDA. Received files will be saved in the shared folder under "File transfer".
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 100 頁，共 160 頁
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [File transfer] icon
A list of devices will appear in the [File transfer] window.
In this case the file will be received from the PDA named "My Mobile"
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 101 頁，共 160 頁
In this case, the file will be received from the PDA named My Mobile .
4. Double-click on the [PDA-1] icon
The file saved in the shared folder in "My Mobile" will appear.
5. Right-click on the file you wish to receive, and then select "Receive file".
The file will be received from a PDA.
Note
With "File transfer", you can send individual files as well as entire folders.
Please right-click on the folder you wish to receive, and select "Receive fo
Subsequent operations should be performed in the same manner as when
receiving individual files.
If the file has been received successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the procedure.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 102 頁，共 160 頁
Note
The received file will be saved in the "Shared folder" under "File transfer"
Bluetooth Information Exchanger
You can use Properties under the Bluetooth Information Exchanger to spec
the location of the "Shared folder" on the hard drive.
Sending images to a mobile telephone
[BIP]
You can send image data to a Bluetooth -compatible mobile telephone.
Large images will be automatically reduced to fit on the telephone display screen.
Images are sent using "Image transfer" under Bluetooth Information Exchanger.
Note
The mobile telephone must support the BIP profile.
The following image file formats can be sent and received using "Image transfer":
Bitmap (* bmp)
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 103 頁，共 160 頁
Bitmap (*.bmp)
JPEG (*.jpg, *.jpeg)
PNG (*.png)
→Sending images to a mobile telephone (using icons)
→Sending images to a mobile telephone (by right -clicking the mouse)
Procedure
■Sending images to a mobile telephone (using icons)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image transfer] icon
A list of devices will appear in the [Image transfer] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 104 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Drag and drop the file you wish to send over the destination icon
In this case, the image will be sent to a mobile telephone named "BT -Phone-1".
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 105 頁，共 160 頁
■Sending images to a mobile telephone (by right -clicking the mouse)
1. Turn on the mobile telephone
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the file you wish to send, and then click on its destination from [to
Bluetooth]
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [to Bluetooth] →[Search other devices]
Once the devices have been detected, the message below will appear. Pleas
select the destination device, and then click on the [Send] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 106 頁，共 160 頁
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Sending images to a PC or PDA
[BIP]
You can send image data to a Bluetooth -enabled PC or PDA.
Images are sent using "Image transfer" under Bluetooth Information Exchanger.
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 107 頁，共 160 頁
The following image file formats can be sent and received using "Image transfer":
Bitmap (*.bmp)
JPEG (*.jpg, *.jpeg)
PNG (*.png)
→Sending images to a PC or PDA (using icons)
→Sending images to a PC or PDA (by right -clicking the mouse)
Procedure
■Sending images to a PC or PDA (using icons)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image transfer] icon
A list of devices will appear in the [Image transfer] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 108 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Drag and drop the file you wish to send over the destination icon
In this case, the image will be sent to a PC named "PC -1".
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 109 頁，共 160 頁
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Images that have been sent will be saved in an image transfer folder on the
destination device.
Images received using "Image transfer" in the Bluetooth Information Excha
will be saved in the "Image Box" in "Image transfer".
You can use Properties under the Bluetooth Information Exchanger to chan
the location of the "Image Box" folder on the hard drive.
■Sending images to a PC or PDA (by right -clicking the mouse)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Right-click on the file you wish to send, and then click on its destination from [to
Bluetooth]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 110 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [to Bluetooth] →[Search other devices]
Once the devices have been detected, the message below will appear. Pleas
select the destination device, and then click on the [Send] button.
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 111 頁，共 160 頁
Note
When you send images by right -clicking the mouse, the image data that ha
sent will be saved in the image transfer shared folder on the destination dev
This is also the case when you send images using icons.
Exchanging business card data with a PC or PDA
[OPP]
You can exchange business card data with a Bluetooth -enabled PC or PDA.
Business card data are exchanged using "Object Push" under Bluetooth Information
Exchanger.
Note
Data compliant with the "vCARD" standard are the only type of business card data
to be sent and received with "Object Push".
Business card data can be used by applications such as Microsoft Outlook.
Business card data can be created in vCARD format by Microsoft Outlook and oth
similar applications.
→"Creating business card data in the vCARD format "
You can send business card data directly from Microsoft Outlook.
→"Sending business card data from Outlook "
The OPP profile must be supported by the PC or PDA of the other party.
→Selecting a business card and sending it to a PC or PDA (using icons)
→Selecting a business card and sending it to a PC or PDA (by right -clicking the mouse
→Sending your personal business card
→Receiving a business card from another party
→Exchanging business cards
Procedure
■Selecting a business card and sending it to a PC or PDA (using icons)
Select a business card you wish to send from among all the business card data you have
already received through exchanges with your business or other contacts, and then send i
another party.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 112 頁，共 160 頁
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 113 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Use the mouse to drag and drop the business card you wish to send over the
destination icon
In this case, the business card will be sent to a PC named "PC -1".
The business card will be sent.
Note
When you try to send a business card, a message requesting permission to
receive the card may appear on the device belonging to the other party (i.e.
the receiving end). The content of the message will vary with the Bluetooth
software installed on the destination device, so please be sure to follow the
instructions provided. If you are using the Bluetooth Utility, a message sim
the one below will appear.
If the business card has been sent successfully, the message below will appear.
Please click on the [OK] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 114 頁，共 160 頁
The message below will appear if the business card transmission was unsuccessfu
Please click on the [OK] button to close the message, and repeat the procedure.
Memo
Data that have been sent will be saved in a folder for exchanged business c
on the destination device.
You can configure an associated application (Microsoft Outlook etc) to star
automatically when you have received a business card, allowing you to vie
card details.
You can use Properties under Bluetooth Information Exchanger to configur
whether or not you would like such an application to start automatically.
■Selecting a business card and sending it to a PC or PDA (by right -clicking the mouse
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the business card you wish to send, and then click on its destinatio
from [to Bluetooth]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 115 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [to Bluetooth] →[Search other devices]
Once the devices have been detected, the message below will appear. Pleas
select the destination device, and then click on the [Send] button.
The business card will be sent.
Note
When you try to send a business card, a message requesting permission to
receive the files may appear on the device belonging to the other party (i.e.
the receiving end). The content of the message will vary with the Bluetooth
software installed on the destination device, so please be sure to follow the
instructions provided.
If you are using the Bluetooth Utility, a message similar to the one below w
appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 116 頁，共 160 頁
If the business card has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the business card transmission was unsuccessfu
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Data that have been sent will be saved in a folder for exchanged business c
on the destination device.
■Sending your personal business card
You can prepare a business card bearing your name and other details such as your compa
and telephone numbers, and then send it to another party.
Note
Please use Properties under Bluetooth Information Exchanger beforehand to config
which data to use for your own business card.
You can only have one business card registered as your own that is able to be sent.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 117 頁，共 160 頁
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Right-click on the destination icon, and then click on [Send business card To]
In this case, your personal business card will be sent to a PC named "PC -1".
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 118 頁，共 160 頁
The business card will be sent.
Note
When you try to send a business card, a message requesting permission to
receive the files may appear on the device belonging to the other party (i.e.
the receiving end). The content of the message will vary with the Bluetooth
software installed on the destination device, so please be sure to follow the
instructions provided. If you are using the Bluetooth Utility, a message sim
the one below will appear.
Business cards that have been sent will be saved in the Inbox of the destina
party.
If your business card has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the business card transmission was unsuccessfu
Please click on the [OK] button to close the message, and repeat the procedure.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 119 頁，共 160 頁
Note
Data that has been sent will be saved in a folder for exchanged business car
the destination device.
■Acquiring a business card from another party
You can use your PC to acquire a business card from a party containing their details.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 120 頁，共 160 頁
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Right-click on the icon of the party whose card you wish to acquire, and then clic
[Receive business card]
In this case, the business card of the other party will be acquired from a PC name
"PC-1".
The business card will be received.
Note
When you try to acquire a business card, a message requesting permission
send the files may appear on the device belonging to the other party (i.e., o
sending end). The content of the message will vary with the Bluetooth softw
installed on the destination device, so please be sure to follow the instructio
provided.
If you are using the Bluetooth Utility, a message similar to the one below w
appear.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 121 頁，共 160 頁
If the business card has been received successfully, the message below will appea
Please click on the [OK] button.
The message below will appear if the business card was unsuccessfully received.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Business card data that have been received will be saved in the Inbox unde
"Object Push".
You can use Properties under the Bluetooth Information Exchanger to set t
location of the Inbox on the hard drive.
■Exchanging business cards
Simultaneously exchange your business card with one belonging to another party.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Alternatively, opening Explorer and clicking on the Bluetooth Information
Exchanger folder will produce the same result.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 122 頁，共 160 頁
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
Note
If the desired device does not appear in the list, please confirm that the dev
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Right-click on the icon of the party with whom you wish to exchange business ca
and then click on [Object Push]
In this case, the business cards will be exchanged with a PC named "PC -1".
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 123 頁，共 160 頁
The business card from the party who executed the "Exchange business cards"
command will be sent first.
Note
When you try to send a business card, a message requesting permission to
receive the files may appear on the device belonging to the other party (i.e.
the receiving end). The content of the message will vary with the Bluetooth
software installed on the destination device, so please be sure to follow the
instructions provided.
If you are using the Bluetooth Utility, a message similar to the one below w
appear.
A message of confirmation will appear if the card has been successfully sent.
Note
Business cards that have been sent will be saved in the Inbox of the destina
party.
Once your business card has finished being sent, the program will start receiving
business card belonging to the other party.
Note
When a business card is to be received, a message such as the one below m
appear on the device belonging to the other party.
Please click on the [Yes] button if you give permission for the business car
be sent.
A message of confirmation will appear if the card has been successfully received
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 124 頁，共 160 頁
A message of confirmation will appear if the card has been successfully received
Note
Business cards that have been received will be saved in the "Inbox" under
"Object Push".
You can use Properties under the Bluetooth Information Exchanger to set t
location of the Inbox on the hard drive.
Using a Bluetooth-compatible camera [BIP]
By connecting a Bluetooth -compatible digital camera to your PC via Bluetooth, you will be
to operate the camera shutter from the PC and transmit the captured images to it as well.
→Connecting the camera
→Taking pictures
→Viewing images saved on your PC
Connecting the camera
Use the "Remote Camera" tool in the Bluetooth Utility to connect the camera to your PC
Procedure
1. Click on [Start ]→[All Programs]→[Bluetooth]→[Remote Camera]
Note
In Windows 2000, click on [Start] →[Programs]→[Bluetooth]→[Remote
Camera].
The [Remote Camera] window will appear.
2. Turn on the camera, and set it to be connectable via Bluetooth
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 125 頁，共 160 頁
Note
Different cameras are operated in different ways, depending on the manufa
and model used. Please refer to the instruction manual for further details on
to operate your camera.
3. Click on the [Camera Search...] button
The camera will be detected and its icon displayed.
4. Right-click on the camera icon, and select [Connect]
The camera will be connected, and images from the camera will appear on -scree
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 126 頁，共 160 頁
Taking pictures
By placing the mouse cursor over the on -screen image, the camera's operating window w
appear.
You can operate the camera from this window.
Procedure
■Taking a single picture
1. Click on the
button in the operating window.
A single image will be captured and sent to the PC.
■Taking several consecutive frames
1. Click on the
button in the operating window
A succession of images will be captured and sent to the PC.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 127 頁，共 160 頁
Note
The remote camera shutter cannot be operated while the camera is connecte
the PC.
The number of consecutive pictures taken can be set to anywhere between
16
1. In the [Remote Camera] window, click on [Bluetooth]→[Propertie
[Consecutive Image Settings]
The [Change number of consecutive images] dialog box will appe
2. Click on the [<][>] buttons to select the number of consecutive im
to be captured
Important
Images are not only sent to the PC, but are stored in the camera's on -board
memory as well.
Please be aware of the remaining memory capacity when you are taking a l
number of pictures.
Large file sizes are common for high -resolution images, and may take som
to be transferred to the PC.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 128 頁，共 160 頁
Viewing images saves on your PC
A "Remote Camera" folder will be created in the "Bluetooth" folder under "My Documen
during initial set -up. A folder bearing the same name as the camera will be created in it,
images will be saved in this folder.
Click the [Explorer] button in the [Remote Camera] window to display the folder where
images have been saved.
Note
This window is an example showing pictures when [Filmstrip] has been selected fr
the [View] menu in Explorer.
Synchronising information using ActiveSync
[SPP]
This section describes how to synchronize information on your PDA (calendars, contacts, inb
etc) with your PC using Microsoft ActiveSync.
When you connect via Bluetooth instead of with a standard cable, you will always be able to
synchronise your data without the hassle of having to connect the cable.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 129 頁，共 160 頁
→Connecting using ActiveSync
→Establishing a partnership between ActiveSync and a PDA
→Finishing an ActiveSync connection
→Cancelling a partnership
Important
Please use ActiveSync v.3.7 or higher. Also please establish a partnership between the
devices using a USB or infrared link before you connect via Bluetooth.
Please refer to the ActiveSync Help or other manuals for information on how to use the
application.
Microsoft Outlook 2002 or another schedule management tool must also be installed on
PC.
Connecting using ActiveSync
Both the PC and PDA must be set up in order for a connection to be established.
■Preparing the PC
Procedure
1. On the PC, click on [Start] →[All Programs]→[Microsoft ActiveSync]
The initial ActiveSync set -up window will appear.
It is assumed in the explanation below that no ActiveSync connections have been
established with other devices.
2. Click [File]→[Connection Settings]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 130 頁，共 160 頁
The [Connection Settings] window will appear.
3. Place a check next to [Allow serial cable or infrared connection to this COM por
and then select "COM7".
Note
In the standard set -up, the port is configured to "COM7" (refer to Steps (3)
(4) under "Preparing the PDA" below). When using a different port, please
change the port number selected in this window.
■Preparing the PDA
Procedure
1. Tap on the Bluetooth icon in the bottom right of the screen
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 131 頁，共 160 頁
Important
The graphic above shows an example of a PDA operating window.
The connection procedure may be different depending on the manufacturer
model of PDA you use. Please refer to the product instruction manuals for
further details.
The [Bluetooth Settings] window will open.
The message "Connection not registered" will appear if no Bluetooth device has
registered.
Please tap on [OK] to close the message.
2. Double click on [Tools] →[Search for peripheral components]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 132 頁，共 160 頁
The application searches for nearby Bluetooth devices.
3. Tap and hold on the destination PC icon, and then select [Update Services]
A search for services will be carried out, and then a list of service names and the
connection status will appear as list in the lower window.
4. Tap and hold on "COM7" from the list of service names, and then select "Registe
ActiveSync".
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 133 頁，共 160 頁
5. Tap [OK] in the confirmation message window
An ActiveSync connection will be initiated.
Establishing a partnership between ActiveSync and a PDA
Once a connection has been successfully established with a PDA, the procedure for
establishing a partnership with the PDA will be started by the ActiveSync application on
PC.
Performing this set -up procedure will enable data to be synchronised between your PC a
PDA.
Procedure
1. In the [New Partnership (Set Up a Partnership)] window, select "Standard
partnership", and then click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 134 頁，共 160 頁
The [New Partnership (Specify Data Synchronisation Method)] window will appe
2. Select "Synchronise with this PC", and then click on the [Next] button
The [New Partnership (Select Synchronisation Settings)] window will appear.
3. Select the type of information to be synchronised between your PC and PDA, and
click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 135 頁，共 160 頁
The [New Partnership (Completing Setup)] window will appear.
4. Click on the [Finish] button
When you click on the [Finish] button, ActiveSync will begin to synchronise you
information.
[Confirming changes]
↓
(Synchronisation process)
↓
[Synchronisation complete]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 136 頁，共 160 頁
While the ActiveSync connection is active, synchronisation will be performed
whenever information is changed on either the PC or the PDA.
Once a partnership has been established, every time you start your PC (and PDA
thereafter, a Bluetooth connection will be opened and ActiveSync will synchroni
your information.
Finishing an ActiveSync connection
Follow the procedure below on your PDA if you want to end an ActiveSync connection
manually.
Procedure
1. Tap and hold on "COM7" in the Bluetooth Settings window, and select [ActiveSy
Release]
Cancelling a partnership
Follow the procedure below from the ActiveSync window on the PC if you want to canc
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 137 頁，共 160 頁
Follow the procedure below from the ActiveSync window on the PC if you want to canc
partnership between your PC and PDA.
Procedure
1. Click on [File]→"Delete partnership"
Click on the [Yes] button when the confirmation message appears.
Note
If you wish to create another ActiveSync connection, you will have to repe
above procedure to re -establish a partnership.
Using a headset to communicate
[HSP]
This section provides a description of how to use a Bluetooth -compatible wireless headset to
communicate (chat) using Microsoft NetMeeting or other software.
→Registering the headset
→Making a connection to the headset
→Disconnecting from the headset
Registering the headset
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 138 頁，共 160 頁
Procedure
1. Right-click on the Bluetooth icon in the tasktray, then click on [Add New Conne
Wizard]
Note
Alternatively, you can click on [Start]>[All Programs]>[Bluetooth]>[Blueto
Settings], then click on [New Connection] in the [Bluetooth Settings] scree
has opened.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizar
screen will appear.
2. Turn the headset power on
Once you have turned on the headset, set the mode to enable a Bluetooth connect
Important
The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult your user guide for a detailed description of how to operate
unit.
3. Confirm that [Express Mode] has been selected, then click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 139 頁，共 160 頁
The [Add New Connection Wizard (Searching for Bluetooth Devices)] screen wi
appear.
Once the device search has been completed, the [Add New Connection Wizard (S
a Device)] screen will appear.
4. Select the name of the headset device from the list, then click on the [Next] butto
5. Answering with the headset
If the service has been properly detected, a screen will appear indicating that the
headset is being called, and a tone will accordingly sound in the headset.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 140 頁，共 160 頁
Please press the headset switch.
Important
The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult your user guide for a detailed description of how to operate
unit.
The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))]
screen will appear, and device configuration will be performed.
Note
If you are connecting to the headset for the first time, or if another Bluetoo
audio device has not yet been registered, the following [Found New Hardw
Wizard] screen will appear, from which you can proceed to install the drive
If another audio device has already been registered (i.e., the driver has been
installed), you can proceed to Step 9 without having to install the driver.
6. Click on the [Next] button
The [Install Hardware] screen will appear.
7. Click on the [Continue Anyway] button
The following screen will appear automatically. You may disregard it and click o
[Continue Anyway] button.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 141 頁，共 160 頁
The [Add New Connection Wizard (Completing the Found New Hardware Wizar
screen, which is the final screen of the installation wizard, will appear.
8. Click on the [Finish] button
Once driver installation is complete, the [Add New Connection Wizard (Enter
Connection Name)] will appear.
9. Confirm the information you have entered, and click on the [Next] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 142 頁，共 160 頁
The [Add New Connection Wizard (Completing the Add New Connection Wizar
screen will appear.
10. Click on the [Finish] button
The configuration information will be registered, and an icon will be displayed in
[Bluetooth Settings] screen.
Making a connection to the headset
You can make a connection to the headset from an icon that has been registered in [Blue
Settings].
Important
Before making a connection to the headset, please check that you have turned on th
headset's power, and that it has been enabled for a Bluetooth connection.
Please ensure that the following audio -related applications have been closed before
connect the headset to your PC.
Windows Media Player, BeatJam, InterVideo WinDVD and other music/audi
playback software
Windows Messenger and other e -conferencing software
If you wish to use these applications, please terminate the headset connection befor
launch them.
Procedure
1. Right-click on the headset icon, then click on [Connect].
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 143 頁，共 160 頁
2. Answer with the headset
A screen will appear indicating that the headset is being called, and a tone will
accordingly sound in the headset.
Please press the headset switch.
If the connection has been properly established, the icon's appearance will change
indicate a connected state.
You may now launch conferencing and voice -recognition software and use the
headset.
Disconnecting from the headset
Please follow the steps below to disconnect from the headset.
Procedure
1. Right-click on the headset icon in the [Bluetooth Settings] screen, then click on
[Disconnect].
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 144 頁，共 160 頁
A message will appear, requesting confirmation that you wish to disconnect. Clic
the [Yes] button.
The icon on the [Bluetooth Settings] screen will appear as shown below, indicatin
that the device has been disconnected.
Troubleshooting
This section describes possible causes and countermeasures to be considered when your Blue
device cannot be configured properly, functions abnormally or presents other problems relate
its operation.
Basic understanding
The section "What you need to know about using Bluetooth " describes the basic concep
be aware of when using Bluetooth. Should you still encounter problems after having read
through this information, please refer to the following list, which has been arranged acco
to application.
Troubleshooting by application
General operation of the Bluetooth Utility
Using a wireless modem station
Using an access point
Using a printer
Using a Bluetooth headset
Using a keyboard or mouse
Using a camera
Using a PDA
Using a mobile telephone
General operation of the Bluetooth Utility
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Bluetooth Manager
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 145 頁，共 160 頁
Bluetooth icon does not appear in task tray
If the Bluetooth icon does not appear in the task tray, Bluetooth Manager will not b
active, which will prevent you from being able to use any of the functions of the
Bluetooth Utility.
Start the utilities as instructed below to enable Bluetooth Manager to start automati
and allow all functions to be utilized.
Bluetooth Settings
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Bluetooth Settings]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Bluetooth Settings]
Remote Camera
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Remote Camera]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Remote Camera]
Wireless File Transfer
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Wireless File Transfer]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Wireless File Transfer]
Bluetooth Settings
Clicking on the [New Connection] button brings up the message "Unable to prepare
Bluetooth."
The wireless communication switch is turned off.
Please switch it on.
Remote device(s) cannot be detected
The other device(s) may have been set to Non -discoverable mode.
Please check the mode settings on the device.
Services on a remote device are undiscoverable
The other device may be using a profile that is not supported by the Bluetooth Util
Please check the profile being used on the other device.
The following profiles are compatible with Bluetooth Settings.
DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIP
Devices running profiles other than those above will not be able to be registered wi
Bluetooth Settings.
Bluetooth Information Exchanger
An error occurs when you try to send a file using the right -click menu.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 146 頁，共 160 頁
Select and right-click on a file, and then you can choose either the FTP or OPP pro
use when you click on [Send to Bluetooth Device].
If neither profile is supported by the destination device, the file will not be able to b
sent from the right -click menu.
The transmission will also fail if you use FTP to send a file to a device that only
supports the OPP profile.
Should this occur, please click on [Bluetooth] →[Profiles] under [Bluetooth Inform
Exchanger] to configure the Transfer mode.
Cannot open shared folder on remote device using [File Transfer].
The other device may have a certain security level enforced (Non -connectable mo
etc). Please confirm the security settings of the other device.
Please enter the correct password if you are asked to enter one.
Remote Camera
See "Using a camera"
Bluetooth Local COM
Cannot add port
A maximum of 64 virtual COM ports can be added. You will be unable to add ano
port if 64 ports have already been configured.
Using a wireless modem station
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Modem station cannot be detected
If the modem station is connected to and is being used by another device, the mode
station will be undetectable even if you search for it.
Cannot connect to modem station
If the modem station is connected to and is being used by another device, no other
device will be able to connect to the modem station
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 147 頁，共 160 頁
device will be able to connect to the modem station.
Bluetooth passkey entry failed
The Bluetooth passkey (PIN code) comprises a sequence of alphanumeric character
with the letters able to be rendered in upper and lower case.
If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly
Cannot connect to telephone line
Please ensure that the telephone cable is connected from the socket to the "LINE"
terminal on the modem station.
Note
If the telephone cable has come loose because it has not been fully inserted in
the socket, the resulting poor contact may prevent data from being transmitte
accurately.
Communication will be impossible if the interior of the cable has been broke
Please replace the cable with another one.
Please ensure that the two slide switches on the underside of the main unit have be
to the "NORMAL" and "MODEM" positions respectively.
Cannot connect to the Internet
The telephone number of the connection (i.e., the telephone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
The user ID and/or password for the provider with whom you have signed up may
been entered incorrectly. Please check the user ID and password.
The default connection may have been configured with different settings. Please se
connection configured for mobile telephone use as the default connection .
When you place a call using a company switchboard or other exchange, the system
require you to enter a "0" before the telephone number itself. Please check the type
telephone line you are using.
Cannot send or receive faxes
Once you have registered a wireless modem station as your fax server, you will nee
enter the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to " Using a modem station for fax transmissions " for information on t
configuration procedure.
The telephone number of the fax destination may have been entered incorrectly. Pl
check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a connectio
not automatically be established with the modem. Please connect to the modem
manually.
When you place a call using a company switchboard or other exchange, the system
require you to enter a "0" before the telephone number itself. Please check the type
telephone line you are using.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 148 頁，共 160 頁
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right -click on the modem you wish to use, and the
on [Properties]
3. Select the [Send] tab, and then confirm that "Enable device to send" has be
checked.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 149 頁，共 160 頁
4. Select the [Receive] tab, and then confirm that "Enable device to receive" h
been checked (when you wish to receive faxes)
5. Click on the [OK] button
Using an access point
Important
Pl
" Wh
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
Bl
h"f
di
2004/11/30
Quick Start Guide - Introduction
第 150 頁，共 160 頁
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Access point cannot be detected
If the access point is connected to and is being used by another device, the access p
will be undetectable even if you search for it.
Cannot connect to access point
If the access point is connected to and is being used by another device, no other de
will be able to connect to the access point.
Cannot connect to LAN
The LAN cable may not be properly connected to the access point. Please check th
connection status.
Note
If the LAN cable has come loose because it has not been fully inserted into th
socket, the resulting poor contact may prevent data from being transmitted
accurately.
Communication will be impossible if the interior of the LAN cable has been
broken. Please replace the cable with another one.
The access point may not have been configured correctly, and may not be able to
maintain the connection to the LAN.
Please refer to the product instruction manual for information on how to configure
access point.
Cannot connect to the Internet
If you are using a LAN to connect to the Internet, the LAN environment of the com
or location where you are trying to establish the connection may require you to con
via a proxy server .
Please click here for information on configuring a proxy server.
Using a printer
Important
Pi
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
b d
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 151 頁，共 160 頁
Printer cannot be detected
If the printer is connected to and is being used by another device, the printer will b
undetectable even if you search for it.
Cannot connect to printer
If the printer is connected to and is being used by another device, no other device w
able to connect to the printer.
Cannot print/garbled print output
The printer driver of the printer you are using may not have been installed correctly
Please refer to your product instruction manual and re -install the driver.
Please check to see if the printer has run out of paper, ink or other consumable item
If you are using a printer while several Bluetooth devices are connected to the PC,
devices may not functional normally. Please disconnect the other devices and try to
again.
Using a Bluetooth Headset
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Bluetooth Headset cannot be detected
If the Bluetooth Headset is connected to and is being used by another device, the
Bluetooth Headset will be undetectable even if you search for it.
Cannot connect to Bluetooth Headset
If the Bluetooth Headset is connected to and is being used by another device, no ot
device will be able to connect to the Bluetooth Headset.
A Bluetooth connection will be impossible if the Bluetooth Headset is connected to
power adaptor.
Please remove the power adaptor and re -connect.
Sound cuts out/cannot hear anything
Using a Bluetooth headset with other Bluetooth devices may cause problems such a
interruptions in sound, reduced transfer speed or failure during file transfer, and
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 152 頁，共 160 頁
disconnection of the other Bluetooth devices. We strongly recommend using a Blue
headset on its own, not in connection with other Bluetooth devices.
Please confirm that the Bluetooth Headset is being operated correctly (for example
ensure that the correct mode (audio or communications) mode has been selected).
Please confirm that the voice file or CD is being played back normally on your PC
Please check the volume settings on your Bluetooth Headset and PC.
If Windows Media Player or another audio -related application is active when you
connect your Bluetooth Headset, you may find it impossible to connect properly to
Bluetooth Headset, or even to use it at all.
Please start such applications after you have connected to the Bluetooth Headset.
Using a keyboard or mouse
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Keyboard or mouse cannot be detected
If the keyboard or mouse is connected to and is being used by another device, the
keyboard or mouse will be undetectable even if you search for it.
Cannot connect to keyboard or mouse
If the keyboard or mouse is connected to and is being used by another device, no o
device will be able to connect to the keyboard or mouse.
Using a camera
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
tb d t t d
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 153 頁，共 160 頁
Camera cannot be detected
If the camera is connected to and is being used by another device, the camera will b
undetectable even if you search for it.
Cannot connect to camera
If the camera is connected to and is being used by another device, no other device w
be able to connect to the camera.
Images from the camera can be displayed, but no pictures can be taken
The memory card in the camera may be full.
Please make a backup of all your necessary data on alternative media, then delete t
images from the memory card, and ascertain how much free space remains.
Camera images do not appear in window
The camera may not have been set to remote camera mode (image browse mode,
configuration mode, etc).
Certain cameras will end the Bluetooth connection automatically if you change the
settings in a mode other than remote camera mode. Please re -connect to the camer
when you next wish to use the device in remote camera mode.
Using a PDA
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Cannot make an ActiveSync connection
Please confirm that you have installed ActiveSync v3.7 or higher on your PC.
ActiveSync is installed to COM7 as a default. Please refer to " Synchronising
information using ActiveSync " and re-configure your ActiveSync connection.
If a port other than COM7 has been used, please amend the ActiveSync connection
settings accordingly.
Cannot locate a saved file
The type of file sent to your PDA, as well as the profile used to send the file, may
where folders saved on your PDA are located.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 154 頁，共 160 頁
Examples:
Images transferred to your PDA using "Image transfer" > saved in the "Image trans
folder
Images transferred to your PDA using "File transfer" > saved in the "Shared folder
Using a mobile telephone
Important
Please refer to " What you need to know about using Bluetooth " for an understandi
the basic concepts to be aware of when using Bluetooth.
Mobile telephone cannot be detected
If the mobile telephone is connected to and is being used by another device, the mo
telephone will be undetectable even if you search for it.
Cannot connect to mobile telephone
If the mobile telephone is connected to and is being used by another device, no oth
device will be able to connect to the mobile telephone.
Cannot send images to mobile telephone
Please use the appropriate transfer method, according to the profiles supported by y
mobile telephone.
If OPP is supported: right -click on a file to send it
If BIP is supported: use "Image transfer" under Bluetooth Information Exchanger t
send images
Cannot connect to the Internet
The telephone number of the connection (i.e., the telephone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
The user ID and/or password for the provider with whom you have signed up may
been entered incorrectly. Please check the user ID and password.
The default connection may have been configured with different settings. Please se
connection configured for mobile telephone use as the default connection .
Cannot send or receive faxes
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 155 頁，共 160 頁
Cannot send or receive faxes
Once you have registered a mobile telephone as your fax server, you will need to e
the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to " Using a modem station for fax transmissions " for information on t
configuration procedure.
The telephone number of the fax destination may have been entered incorrectly. Pl
check the telephone number.
If the setting under COM Auto Connect Settings has been set to "Off", a connectio
not automatically be established with the modem. Please connect to the mobile
telephone manually.
The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the [Fax]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right -click on the modem you wish to use, and the
on [Properties]
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 156 頁，共 160 頁
3. Select the [Send] tab, and then confirm that "Enable device to send" has be
checked.
4. Select the [Receive] tab, and then confirm that "Enable device to receive" h
been checked when you wish to receive faxes)
5. Click on the [OK] button
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 157 頁，共 160 頁
Glossary
This glossary provides definitions for Bluetooth -related terminology.
You will be able to look up the meanings of any uncertain terms here.
A2DP Profile
Abbreviation of Advanced Audio Distribution.
A Bluetooth profile allowing you to adjust the sound quality of wireless headsets and ot
audio devices.
AVRCP Profile
Abbreviation of Audio/Video Remote Control Profile. A Bluetooth profile enabling rem
control functions to be sent and received. Remote control commands can be received by
Bluetooth Utility.
Bluetooth Profile
A specification that guarantees the connection to the service function of a remote Blueto
device.
For a Bluetooth device to send and receive information to and from another device, both
devices must support shared profiles designated for each function, such as dial -up
networking, faxing, printing and human interface devices.
DHCP
Abbreviation of Dynamic Host Configuration Protocol
DHCP is a function that automatically sets up IP addresses. This function will allow you
avoid having to set up IP addresses on each computer.
DUN P fil
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 158 頁，共 160 頁
DUN Profile
A Bluetooth profile for Dial -up Networking.
This profile enables you to establish a dial -up Bluetooth connection with a wireless mo
station, mobile telephone, or similar device.
FAX Profile
A Bluetooth profile that enables you to establish a Bluetooth connection with a wireless
modem station, mobile telephone, or similar device to send or receive a fax.
FTP
Abbreviation of File Transfer Profile.
A Bluetooth profile that enables you to browse folders on a wireless device and transfer
to and from the local device.
GAVDP Profile
Abbreviation of Generic Audio -Video Distribution Profile. This is a Bluetooth profile.
HCRP
Abbreviation of Hardcopy Cable Replacement Profile. A Bluetooth profile that establish
connection to a device only when you print, unlike SPP (Serial Port Profile).
HID Profile
Abbreviation of Human Interface Device Profile.
A Bluetooth profile that enables you to connect to a wireless mouse, keyboard or other i
device.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 159 頁，共 160 頁
LAP
Abbreviation of LAN Access Profile.
A Bluetooth profile that enables you to establish a Bluetooth connection to a LAN acces
point to access a LAN via PPP.
OPP
Abbreviation of Object Push Profile.
A Bluetooth profile that enables you to exchange business cards with a wireless device.
Passkey
Also known as a PIN code
This is a password consisting of up to 16 alphanumeric characters that enables a connec
to be established to a wireless device. You need to know the passkey in order to connec
device that requires authentication.
Even when the authentication setting has been disabled in the User Mode Properties of t
Bluetooth Utility, the passkey entry dialog box will appear automatically if authenticatio
required, enabling you to authenticate a device. A link key will be created once you hav
authenticated a device, eliminating the need for a passkey to connect to that device in th
future.
Pairing
A security function. In order for Bluetooth devices to authenticate each other, a passkey
code) is entered in each terminal when they are connected for the first time, and a secret
bit link key is generated. This action is known as "pairing."
SPP
Abbreviation of Serial Port Profile.
A Bluetooth profile that enables communication with a device through a virtual serial po
configured for a Bluetooth connection. This can be used for printers and printer adapters
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30
Quick Start Guide - Introduction
第 160 頁，共 160 頁
configured for a Bluetooth connection. This can be used for printers and printer adapters
PDAs, using a method different from HCRP or ActiveSync .
TCP/IP
Abbreviation of Transmission Control Protocol/Internet Protocol.
Standard communications protocol (convention for enabling data communication) used
Internet. Using the same protocol enables computers to exchange data with each other.
vCARD
Common standard for electronic business cards.
Names, (e)mail addresses, telephone numbers and other information are exchanged in th
form of electronic business cards (in *.vcf format), allowing all parties to easily register
other's data in their address books.
The standard is extensively compatible with Microsoft Outlook, Lotus Organizer and oth
mail/schedule management software.
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm
2004/11/30

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 97
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:73f3930f-b3cf-4a8d-bd1a-2645404561d2
Modify Date                     : 2004:12:03 08:52:59-05:00
Create Date                     : 2004:12:03 08:52:40-05:00
Metadata Date                   : 2004:12:03 08:52:59-05:00
Document ID                     : uuid:d4b2bd0d-c82d-4308-817e-464cb91c6514
Format                          : application/pdf
Producer                        : Acrobat Distiller 5.0 (Windows)

EXIF Metadata provided by EXIF.tools