ASUSTeK Computer W5G00UGPZ50 NOTEBOOK P.C. BLUETOOTH DEVICE User Manual USERS MANUAL 5

ASUSTeK Computer Inc NOTEBOOK P.C. BLUETOOTH DEVICE USERS MANUAL 5

USERS MANUAL 5

Quick Start Guide - Introduction 第 64 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[Fax
Console]
window
will
appear
.
3. In the [Fax Console] window, double-click on the fax that has arrived
An image of the received fax will be displayed.
Related topic: "Sending a fax"
Printing
Quick Start Guide - Introduction 第 65 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
This section describes how to use a Bluetooth -compatible printer for printing.
When printing using Bluetooth, the methods for configuring and using the printer will vary
with the corresponding profile.
z(*1) The majority of Bluetooth-compatible printers support HCRP.
If you have selected Express Mode, HCRP will be chosen as the default profile. If the
printer does not support HCRP, then SPP will be the next choice.
z(*2) The printing of business cards using OPP complies exclusively with the business
card (vCARD) standard.
Types of printer functions
Profile Bluetooth Settings Operation
HCRP (*1) You must register the
printer in Bluetooth
Settings
Allows you to print from various applications, as
with ordinary cable-connected printers.
→"Printing document and images"
SPP
OPP (*2) Not required Allows you to print business card data directly.
→"Printing business card data"
BIP Not required Allows you to print image data directly.
→"Printing images directly from a digital camera
or other device"
Note
This section describes how to print using a Bluetooth -compatible printer.
→Setting up the printer
→Printing
zPlease ensure that any printer-specific drivers have been installed on the PC before you
have established a Bluetooth connection.
zA Bluetooth passkey (PIN code) is required for you to connect to the printer. Please
make a note of your Bluetooth passkey before you start the set -up process.
Important
S tti th i t
Printing documents and images [HCRP] [SPP]
Quick Start Guide - Introduction 第 66 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Turn on the printer
2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
{Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth
Settings], and then click on [New Connection] from the active [Bluetooth
Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection
Wizard)] window will appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next]
button
The [Add New Connection Wizard (Searching for Bluetooth devices)] window
will appear.
S
e
tti
ng up
th
e pr
i
n
t
er
Procedure
Note
Quick Start Guide - Introduction 第 67 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Once the program has finished searching for the devices, the [Add New
Connection Wizard (Device Selection)] window will appear.
4. Select the device name of the printer from [Device List], and then click on the
[Next] button
The [Add New Connection Wizard (Searching for Services)] window will appear.
Quick Start Guide - Introduction 第 68 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
5. If you are connecting to the printer for the first time, enter the passkey for the
device from the [Bluetooth Passkey (PIN Code)] window, and then click on the
[OK] button.
Once the services have been detected successfully, connection to the device and
creation of the HCRP port will be performed automatically.
If you have not yet installed a printer, a message prompting you to install a printer
will appear.
6. Click on the [OK] button
The [Add Printer Wizard (Starting the Add Printer Wizard)] window will appear.
7. Click on the [Next] button
Quick Start Guide - Introduction 第 69 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The [Add Printer Wizard (Local Printer or Network Printer)] window will appear.
8. Select "Local printer attached to this computer", remove the check next to
"Automatically detect and install my Plug and Play printer", and then click on the
[Next] button
The [Add Printer Wizard (Select Printer Port)] window will appear.
9. Select the desired port, and then click on the [Next] button
The [Add Printer Wizard (Install Printer Software)] window will appear.
Quick Start Guide - Introduction 第 70 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
10. Select the [Manufacturer] and [Printer] as pertains to the printer to be installed, or
click on the [Use Device] button, and then click on the [Next] button
Please install the printer according to the instructions in the windows that follow.
Once installation is complete, a message of confirmation will appear in the [Add
New Connection Wizard (Printer Settings)] window.
11. Click on [Next]
The [Add New Connection Wizard (Connection Name Settings)] window will
appear.
12. Enter the type and name of the icon displayed after registration, and then click on
the [Next] button
Please click on the [Next] button if you are satisfied with the settings.
Quick Start Guide - Introduction 第 71 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{You can change the connection icon and icon name.
→"Changing the connection icon name "
→"Changing the connection icon"
Try to print from the message pad.
1. Click [File]→[Print]
The [Print] screen will appear.
2. Select wireless printer from under [Select Printer], and then click on the [Print]
button
Printing will commence.
Note
Printing
Note
Quick Start Guide - Introduction 第 72 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zIf you have connected to a printer using HCRP or SPP profiles, all future Bluetooth
connections to that printer will be established automatically once you have printed a
document from your PC.
　
If
ou have a
rinter that su
orts BIP
Basic Ima
in
Profile
ou can send ima
es dir
to a printer to be printed out, without having to perform any special set -up procedure.
→Printing image files on a printer (using icons)
→Printing image files on a printer (by right -clicking the mouse)
zBelow is a list of file t
yp
es
(
extensions
)
of ima
g
es that can be
p
rinted out directl
y
.
{Bitmap (*.bmp)
{JPEG (*.jpg; *.jpeg)
{PNG (*.png)
■Printing image files on a printer (using icons)
1. Turn on the printer
2. Click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
en Ex
p
lorer and click on the Bluetooth Information Exch
a
folder for the same result.
Note
Procedure
Note
Printing images directly from a digital camera or other device
[BIP]
Quick Start Guide - Introduction 第 73 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image Transfer] icon
A list of devices will appear in the [Image Transfer] window.
{If
y
our desired
p
rinter does not a
pp
ear in the list
,
p
lease confirm that the
pr
has been turned on, and then click on [Bluetooth] →[Search Devices]
A device search will be performed.
4. Drag and drop the file to be sent on top of the icon of the destination printer
Note
Quick Start Guide - Introduction 第 74 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The file will be sent to the printer.
If the file has been sent to the
p
rinter successfull
y,
the messa
g
e below will a
pp
e
a
the image will be printed out. Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the printing procedure.
{If the
p
rinter does not su
pp
ort the BIP
p
rofile
,
the messa
g
e below will a
ppe
■Printing image files to a printer (by right -clicking the mouse)
Note
Quick Start Guide - Introduction 第 75 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Turn on the printer
2. Right-click on the file to be sent
,
and then click on the destination
p
rinter under
[
Bluetooth]
{If
y
our desired device does not a
pp
ear in the list
,
p
lease confirm that the d
e
has been turned on, and then click on [to Bluetooth] →[Search Other Dev
i
Once the device has been detected
,
the messa
g
e below will a
pp
ear. Please
s
the destination device, and click on the [Send] button.
Note
Quick Start Guide - Introduction 第 76 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
A window indicating that the file is being sent to the printer will appear.
If the file has been sent to the
p
rinter successfull
y,
the messa
g
e below will a
pp
e
a
the image will be printed out. Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the printing procedure.
{If the
p
rinter does not su
pp
ort the BIP
p
rofile
,
the messa
g
e below will a
ppe
Note
If
ou have a
rinter that su
orts OPP
Ob
ect Push Profile
ou can directl
send busi
card data that conforms to the "vCard" standard to a printer and print it out.
Printing business card data [OPP]
Quick Start Guide - Introduction 第 77 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
→Printing business card data (using icons)
→Printing business card data (by right -clicking the mouse)
■Printing business card data (using icons)
1. Turn on the printer
2. Click on the Bluetooth Information Exchanger icon on the Desktop
{Alternatively, open Explorer and click on the Bluetooth Information Exch
folder for the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
Procedure
Note
Quick Start Guide - Introduction 第 78 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Here, the image will be sent to the target printer.
{If
y
our desired
p
rinter does not a
pp
ear in the list
,
p
lease confirm that the
pr
has been turned on, and then click on [Bluetooth] →[Search Devices]
A device search will be performed.
　
4. Dra
g
and dro
p
the business card data to be sent on to
p
of the icon of the destinat
i
printer
Note
Quick Start Guide - Introduction 第 79 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The business card will be sent to the printer.
If the business card has been sent to the
p
rinter successfull
y,
the messa
g
e below
w
appear, and the image will be printed out. Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the business card transmission was unsuccessf
u
Please click on the [OK] button to close the message, and repeat the printing
procedure.
■Printing business card data (by right -clicking the mouse)
1. Turn on the printer
2. Right-click on the business card data to be sent
,
and then click on the destinatio
n
printer under [to Bluetooth]
{If
y
our desired device does not a
pp
ear in the list
,
p
lease confirm that the d
e
has been turned on, and then click on [to Bluetooth] →[Search Other Dev
i
Once the device has been detected
,
the messa
g
e below will a
pp
ear. Please
s
the destination device
,
and click on the
[
Send
]
button.
Note
Quick Start Guide - Introduction 第 80 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
,[]
The business card will be sent to the printer.
If the business card has been sent to the
p
rinter successfull
y,
the messa
g
e below
w
appear, and the image will be printed out. Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the business card transmission was unsuccessf
u
Please click on the [OK] button to close the message, and repeat the printing
procedure.
This section describes how to use the stereo head
p
hones to listen to
y
our favourite music or
o
audio files stored on your PC.
Listening to music using the stereo headphones 【GAVDP】
【A2DP】 【AVRCP】
Quick Start Guide - Introduction 第 81 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
→Configuring the stereo headphones
→Connecting to the stereo headphones
→Listening to music or other audio files
→Playing music using remote control
→Copyright protection function
1. Right-click on the Bluetooth icon in the task tray, and click on [Add New
Connection].
{Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth
Settin
g
s
],
and then click on
[
New Connection
]
from the
[
Bluetooth Settin
gs
screen that has opened.
The
[
Add New Connection Wizard
(
Welcome to the Add New Connection Wiza
r
will appear.
2. Switch ON the stereo headphones and activate "Discoverable" mode
Please refer to the user
g
uide for the stereo head
p
hones for further information o
n
how to operate them.
3. Confirm that
[
Ex
p
ress Mode
]
has been selected
,
and then click on the
[
Next
]
but
t
Configuring the stereo headphones
Procedure
Note
Quick Start Guide - Introduction 第 82 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
Add New Connection Wizard
(
Searchin
g
for Bluetooth Devices
)]
screen w
i
appear.
Once the search for the devices has ended
,
the
[
Add New Connection Wizard
(
S
e
Device)] screen will appear.
4. Select the device name of the stereo head
p
hones from the list
,
and click on the
[N
button
Quick Start Guide - Introduction 第 83 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
Add New Connection Wizard
(
Searchin
g
for Services
)]
screen will a
pp
ear.
5. Confi
g
ure the t
yp
e and name of the icon to a
pp
ear once re
g
istration is com
p
lete
,
click on the [Next] button
Please click the [Next] button once you are satisfied with the configuration.
The [Add New Connection Wizard (Configure Connection Name)] screen will
appear.
6. Click on the [Finish] button
The settin
g
s will be re
g
istered
,
and the icon will a
pp
ear on the
[
Bluetooth Settin
g
screen.
You can connect to the stereo head
hones from the icon re
istered in
Bluetooth Settin
Please refer to the user
uide for information on how to make a connection from the ster
headphones.
zPlease close the followin
g
audio a
pp
lications before an
y
connection is made betwe
your stereo headphones and PC.
{Music/video playback applications
{e-Conferencing applications
{Voice-recognition applications
Please finish connecting the stereo headphones before launching any of these
applications.
1
Pl i i th di fil PC
Connecting to the stereo headphones
Important
Listening to music or other audio files
Quick Start Guide - Introduction 第 84 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1
.
Pl
a
yi
n
g
mus
i
c or o
th
er au
di
o
fil
es on
y
our
PC
{Please confirm the
p
oints below if
y
ou are unable to hear an
y
thin
g
des
p
ite
having properly connected the stereo headphones.
Click [Start]→[All Programs]→[Accessories]→[Entertainment]→[Volu
m
Control].
Remove the tick next to
[
Mute
]
if it has been ticked. If the volume is at its
lowest setting, please adjust it to an appropriate level.
{Music
p
la
y
back ma
y
be interru
p
ted if other Bluetooth devices are currentl
y
connected to
y
our PC. When
y
ou are listenin
g
to music
,
it is recommende
d
the stereo headphones be the only connected device.
{Music
p
la
y
back ma
y
be interru
p
ted if
y
ou are some distance awa
y
from th
e
or if there are any obstructions between you and the PC.
{If
y
ou are unable to hear an
y
sound out of
y
our stereo head
p
hones while
m
or audio is currentl
y
p
la
y
in
g
in a related a
pp
lication
,
p
lease sto
p
the files b
e
p
la
y
ed
,
o
p
en
[
Sounds and Audio Devices
]
from the Control Panel
,
and cha
n
the default device to "Toshiba Bluetooth Wave."
If
y
ou are still unable to hear an
y
sound from the stereo head
p
hones even
a
having set "Toshiba Bluetooth Wave" as the default device, please re -lau
n
application.
2. Finishing listening to music and disconnecting
1. Right-click on the icon for the currentl
y
connected mode from
[
Bluetoot
h
Settings] on your PC, and click on "Disconnect."
A message confirming the disconnection may appear.
2. Click on the "Yes" button after having followed the instructions in the
message.
The icon will indicate that the device has been disconnected.
{Please close the followin
g
audio a
pp
lications before
y
ou disconnect the ste
r
headphones from your PC:
Important
Important
Quick Start Guide - Introduction 第 85 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Music/video playback applications
e-Conferencing applications
Voice-recognition applications
Please com
p
letel
y
disconnect the stereo head
p
hones before launchin
g
an
y
o
these applications.
Please refer to the user
g
uide for information on terminatin
g
a connection
f
the stereo headphones.
Music applications and video playback applications installed on your PC
(e.g.,"Windows Media Player 9" and "InterVideo WinDVD") may be operated
with the remote control button/switch on your stereo headphones.
The remote control used with the stereo headphones must be compliant with
the Bluetooth AVRCP profile. Please refer to the headphones user guide for
further information.
You can configure the application to be operated using the switch/button
according to the following procedure.
1. Double-click on the Bluetooth icon in the taskbar
Launches "Bluetooth Settings."
2. Click on [Bluetooth]→[Select AV Player] from the menu bar
The [Select AV Player] screen will appear.
3. Select the application, and click on the [OK] button
The functions and switch/button that can be operated may differ depending on
the application used for music/video playback as well as the version.
The procedure below can be performed in order to change the position where
the receive command is displayed or to not have the command displayed.
1. Double-click on the Bluetooth icon in the taskbar
Launches "Bluetooth Settings."
2. Click on [Bluetooth]→[Select AV Player] from the menu bar.
The [Select AV Player] screen will appear.
3. Select the appropriate item from the pull -down menu of positions
where the receive command is to be displayed, and then click on the
[OK] button.
If the receive command appears but does not function properly, sometimes
the problem may be rectified by changing the setting to "Do not display."
The commands supported by this application are shown below. Please refer to
the headphone user guide for commands that are supported by the stereo
headphones. Problems with operation may be encountered with certain
versions of "Windows Media Player 9" and "InterVideo WinDVD."
[Windows Media Player 9]
Playing music using remote control
Procedure
Procedure
Quick Start Guide - Introduction 第 86 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
[Windows
Media
Player
9]
zPlay
zStop
zPause
zNext
zPrevious
zFast forward
zRewind
[InterVideo WinDVD]
zPlay
zStop
zPause
zNext chapter
zPrevious chapter
zFast Forward
zFast Backward
zUp
zDown
zLeft
zRight
zSelect
zRoot menu
zAngle
A copyright protection function is supported according to the SCMS -T format
as defined in the Bluetooth specifications. Follow the configuration procedure
below to establish connections only with devices that support this function.
1. Double-click on the Bluetooth icon in the task tray.
Launches "Bluetooth Settings."
2. Select
[
Bluetooth
]
from the menu
,
and click on
[
Co
py
ri
g
ht Protection Settin
g
The copyright protection dialog will appear.
3. Tick the box next to "Only connect to devices that are copyright -
p
rotected
u
the SCMS-T format," and click on the OK button.
Copyright protection function
Procedure
This section describes how to connect a Bluetooth -compatible keyboard to a PC.
S tti th i l k b d
Using a wireless keyboard [HID]
Quick Start Guide - Introduction 第 87 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
{Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth S
e
and then click on [New Connection] from the active [Bluetooth Settings]
window.
The
[
Add New Connection Wizard
(
Welcome to the Add New Connection Wiza
r
window will appear.
2. Confirm that
[
Ex
p
ress Mode
]
has been selected
,
and then click on the
[
Next
]
but
t
The
[
Add New Connection Wizard
(
Searchin
g
for Bluetooth devices
)]
window
w
appear.
S
e
tti
ng up
th
e w
i
re
l
ess
k
ey
b
oar
d
Procedure
Note
Quick Start Guide - Introduction 第 88 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Once the
p
ro
g
ram has finished searchin
g
for the devices
,
the
[
Add New Connect
i
Wizard (Device Selection)] window will appear.
3. Select the device name of the ke
y
board from
[
Device List
],
and then click on th
e
[Next] button
The
[
Add New Connection Wizard
(
Searchin
g
for Services
)]
window will a
pp
ea
r
Quick Start Guide - Introduction 第 89 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
4. Use the wireless keyboard to enter the numbers that a
pp
ear in
[
Bluetooth Passke
Code)], and then hit the [Enter] key
Once the
p
ro
g
ram has detected the services successfull
y,
connection to the devic
e
registration of settings information will be performed automatically.
The
[
Add New Connection Wizard
(
Connection Name Settin
g
s
)]
window will a
p
5. Enter the t
yp
e and name of the icon dis
p
la
y
ed after re
g
istration
,
and then click o
n
[Next] button
Please click on the [Next] button if you are satisfied with the settings.
Quick Start Guide - Introduction 第 90 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{You can change the connection icon and icon name.
→"Changing a connection icon name"
→"Changing a connection icon"
The
[
Add New Connection Wizard
(
Com
p
letin
g
the Add New Connection Wiza
r
window will appear.
6. Click on the [Finish] button
The settin
g
s information will be re
g
istered
,
and an icon will a
pp
ear in the
[
Bluet
o
Settings] window.
zPressin
g
an
y
ke
y
on the wireless ke
y
board will automaticall
y
connect it to the PC
thereafter.
Please connect manually if automatic connection is unsuccessful.
Note
Note
This section describes how to connect a Bluetooth -compatible mouse to a PC.
Setting up the wireless mouse
Using a wireless mouse [HID]
Quick Start Guide - Introduction 第 91 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Turn on the wireless mouse, and set it to be connectable via Bluetooth
Please refer to the instruction manual for details on how to operate the mouse.
2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New
Connection]
{Alternatively, click [Start]→[All Programs]→[Bluetooth]→[Bluetooth S
e
and then click on [New Connection] from the active [Bluetooth Settings]
window.
The
[
Add New Connection Wizard
(
Welcome to the Add New Connection Wiza
r
window will appear.
3. Confirm that
[
Ex
p
ress Mode
]
has been selected
,
and then click on the
[
Next
]
but
t
The
[
Add New Connection Wizard
(
Searchin
g
for Bluetooth devices
)]
window
w
appear.
Procedure
Note
Quick Start Guide - Introduction 第 92 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Once the
p
ro
g
ram has finished searchin
g
for the devices
,
the
[
Add New Connect
i
Wizard (Device Selection)] window will appear.
4. Select the device name of the mouse from
[
Device List
],
and then click on the
[N
button
The
[
Add New Connection Wizard
(
Searchin
g
for Services
)]
window will a
pp
ea
r
Quick Start Guide - Introduction 第 93 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
A message confirming a device connection will appear.
5. Click on the [OK] button
The
[
Add New Connection Wizard
(
Connection Name Settin
g
s
)]
window will a
p
6. Enter the t
yp
e and name of the icon dis
p
la
y
ed after re
g
istration
,
and then click o
n
[Next] button
Please click on the [Next] button if you are satisfied with the settings.
{Please use this window to change the connection name and icon.
- Changing the connection icon name
- Changing the connection icon
The
[
Add New Connection Wizard
(
Com
p
letin
g
the Add New Connection Wiza
r
window will appear.
7. Click on the [Finish] button
Note
Quick Start Guide - Introduction 第 94 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The settin
g
s information will be have been re
g
istered
,
and an icon will a
pp
ear in
[Bluetooth Settings] window.
{Clicking on one of the mouse buttons or otherwise operating it will
automatically connect it to the PC thereafter. Please connect manually if
automatic connection is unsuccessful.
Note
You can send and receive files other than business card data with a Bluetooth -enabled
P
PDA.
Use "File transfer" in the Bluetooth Information Exchanger to exchange files.
zThe same o
p
erations will be valid as lon
g
as the PC and PDA su
pp
ort the FTP
p
ro
f
z"File transfer" cannot be used to send or receive business card data. Please instead
"Object Push" to perform these activities.
→Sending files to a PC or PDA (using icons)
→Sending files to a PC or PDA (by right-clicking the mouse)
→Receiving files from a PC or PDA
■Sending files to a PC or PDA (using icons)
1. Turn on the PC or PDA
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Procedure
Exchanging files with a PC or PDA [FTP]
Quick Start Guide - Introduction 第 95 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [File transfer] icon
A list of devices will appear in the [File transfer] window.
Note
Note
Quick Start Guide - Introduction 第 96 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
{You can also use "Image transfer" when sending individual image files.
4. Use the mouse to dra
g
and dro
p
the file
y
ou wish to send over the destination ic
o
In this case, the file will be sent to a PC named "PC -1".
{When usin
g
"File transfer"
,
y
ou can send individual files as well as entire
folders.
5. Confirm that the file is being sent
The file will be sent to the PC.
{When sendin
g
files usin
g
"File transfer"
,
a messa
g
e re
q
uestin
g
p
ermission
t
receive the files ma
y
a
pp
ear on the destination
(
receivin
g)
device. The con
t
the messa
g
e will var
y
with the Bluetooth software installed on the destinat
i
device, so please be sure to follow the instructions provided.
If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e similar to the one below
w
appear.
If the file has been sent successfully, the message below will appear.
Please click on the [OK] button.
Note
Note
Quick Start Guide - Introduction 第 97 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The message below will appear if the file transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
{Files that have been sent will be saved in a file transfer shared folder on th
e
destination device.
{Additionally, with "File transfer", you can open the shared folder on the
destination device usin
g
Ex
p
lorer
,
s
p
ecif
y
a subfolder
,
and then send the fi
l
there.
{You can use Properties in the Bluetooth Information Exchan
g
er to chan
g
e
location of the "Shared folder" on the hard drive.
■Sending files to a PC or PDA (by right -clicking the mouse)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the file
y
ou wish to send
,
and then select its destination from
[
to
Bluetooth]
Note
Quick Start Guide - Introduction 第 98 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [to Bluetooth] →[Search other devices
]
Once the devices have been detected
,
the messa
g
e below will a
pp
ear. Plea
s
select the destination device, and then click on the [Send] button.
3. Confirm that the file is being sent
The file will be sent to the PC.
Note
Quick Start Guide - Introduction 第 99 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{When sendin
g
files usin
g
"File transfer"
,
a messa
g
e re
q
uestin
g
p
ermission
t
receive the files ma
y
a
pp
ear on the destination
(
receivin
g)
device. The con
t
the messa
g
e will var
y
with the Bluetooth software installed on the destinat
i
device, so please be sure to follow the instructions provided.
If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e similar to the one below
w
appear.
If the file has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the file transmission was unsuccessful.
Please click on the
[
OK
]
button to close the messa
g
e
,
and then re
p
eat the
p
roced
u
{Files that have been sent will be saved in a file transfer shared folder on th
e
destination device.
■Receiving files from a PC or PDA
Your PC is able to receive files that have been saved in the shared folder on the destinat
PC or PDA. Received files will be saved in the shared folder under "File transfer".
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Note
Quick Start Guide - Introduction 第 100 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [File transfer] icon
A list of devices will appear in the [File transfer] window.
In this case the file will be received from the PDA named
"
My Mobile
"
Note
Quick Start Guide - Introduction 第 101 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
In
this
case,
the
file
will
be
received
from
the
PDA
named
My
Mobile
.
4. Double-click on the [PDA-1] icon
The file saved in the shared folder in "My Mobile" will appear.
5. Right-click on the file you wish to receive, and then select "Receive file".
The file will be received from a PDA.
{With "File transfer"
,
y
ou can send individual files as well as entire folders.
Please right-click on the folder
y
ou wish to receive
,
and select "Receive fo
Subsequent operations should be performed in the same manner as when
receiving individual files.
If the file has been received successfully, the message below will appear.
Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the file transmission was unsuccessful. Please
on the [OK] button to close the message, and repeat the procedure.
Note
Quick Start Guide - Introduction 第 102 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{The received file will be saved in the "Shared folder" under "File transfer"
Bluetooth Information Exchanger
You can use Properties under the Bluetooth Information Exchan
g
er to s
p
e
c
the location of the "Shared folder" on the hard drive.
Note
You can send image data to a Bluetooth -compatible mobile telephone.
Large images will be automatically reduced to fit on the telephone display screen.
Images are sent using "Image transfer" under Bluetooth Information Exchanger.
zThe mobile telephone must support the BIP profile.
zThe followin
g
ima
g
e file formats can be sent and received usin
g
"Ima
g
e transfer":
{
Bitmap (* bmp)
Note
Sending images to a mobile telephone [BIP]
Quick Start Guide - Introduction 第 103 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{
Bitmap
(*
.
bmp)
{JPEG (*.jpg, *.jpeg)
{PNG (*.png)
→Sending images to a mobile telephone (using icons)
→Sending images to a mobile telephone (by right -clicking the mouse)
■Sending images to a mobile telephone (using icons)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image transfer] icon
A list of devices will appear in the [Image transfer] window.
Procedure
Note
Quick Start Guide - Introduction 第 104 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Drag and drop the file you wish to send over the destination icon
In this case, the image will be sent to a mobile telephone named "BT -Phone-1".
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Quick Start Guide - Introduction 第 105 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
■Sending images to a mobile telephone (by right -clicking the mouse)
1. Turn on the mobile telephone
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the file
y
ou wish to send
,
and then click on its destination from
[
t
o
Bluetooth]
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [to Bluetooth] →[Search other devices
]
Once the devices have been detected
,
the messa
g
e below will a
pp
ear. Plea
s
select the destination device, and then click on the [Send] button.
Note
Quick Start Guide - Introduction 第 106 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
　
You can send image data to a Bluetooth -enabled PC or PDA.
Images are sent using "Image transfer" under Bluetooth Information Exchanger.
Note
Sending images to a PC or PDA [BIP]
Quick Start Guide - Introduction 第 107 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zThe followin
g
ima
g
e file formats can be sent and received usin
g
"Ima
g
e transfer":
{Bitmap (*.bmp)
{JPEG (*.jpg, *.jpeg)
{PNG (*.png)
→Sending images to a PC or PDA (using icons)
→Sending images to a PC or PDA (by right-clicking the mouse)
■Sending images to a PC or PDA (using icons)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Image transfer] icon
A list of devices will appear in the [Image transfer] window.
Procedure
Note
Quick Start Guide - Introduction 第 108 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Drag and drop the file you wish to send over the destination icon
In this case, the image will be sent to a PC named "PC -1".
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
Note
Quick Start Guide - Introduction 第 109 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
{Ima
g
es that have been sent will be saved in an ima
g
e transfer folder on th
e
destination device.
{Ima
g
es received usin
g
"Ima
g
e transfer" in the Bluetooth Information Exch
a
will be saved in the "Image Box" in "Image transfer".
{You can use Properties under the Bluetooth Information Exchan
g
er to cha
n
the location of the "Image Box" folder on the hard drive.
■Sending images to a PC or PDA (by right -clicking the mouse)
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Right-click on the file
y
ou wish to send
,
and then click on its destination from
[
t
o
Bluetooth]
Note
Quick Start Guide - Introduction 第 110 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [to Bluetooth] →[Search other devices
]
Once the devices have been detected
,
the messa
g
e below will a
pp
ear. Plea
s
select the destination device, and then click on the [Send] button.
The image will be sent.
If the image has been sent successfully, the message below will appear.
Please click on the [OK] button.
The message below will appear if the image transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Quick Start Guide - Introduction 第 111 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{When you send images by right-clickin
g
the mouse
,
the ima
g
e data that h
a
sent will be saved in the ima
g
e transfer shared folder on the destination de
v
This is also the case when you send images using icons.
Note
You can exchange business card data with a Bluetooth -enabled PC or PDA.
Business card data are exchanged using "Object Push" under Bluetooth Information
Exchanger.
zData com
p
liant with the "vCARD" standard are the onl
y
t
yp
e of business card dat
a
to be sent and received with "Object Push".
Business card data can be used by applications such as Microsoft Outlook.
zBusiness card data can be created in vCARD format b
y
Microsoft Outlook and oth
similar applications.
→"Creating business card data in the vCARD format "
zYou can send business card data directly from Microsoft Outlook.
→"Sending business card data from Outlook "
zThe OPP profile must be supported by the PC or PDA of the other party.
→Selecting a business card and sending it to a PC or PDA (using icons)
→Selecting a business card and sending it to a PC or PDA (by right -clickin
g
the mous
e
→Sending your personal business card
→Receiving a business card from another party
→Exchanging business cards
■Selecting a business card and sending it to a PC or PDA (using icons)
Select a business card
ou wish to send from amon
all the business card data
ou have
alread
received throu
h exchan
es with
our business or other contacts
and then send
another party.
Note
Procedure
Exchanging business card data with a PC or PDA [OPP]
Quick Start Guide - Introduction 第 112 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
Note
Quick Start Guide - Introduction 第 113 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
4. Use the mouse to drag and drop the business card you wish to send over the
destination icon
In this case, the business card will be sent to a PC named "PC -1".
The business card will be sent.
{When
y
ou tr
y
to send a business card
,
a messa
g
e re
q
uestin
g
p
ermission to
receive the card ma
y
a
pp
ear on the device belon
g
in
g
to the other
p
art
y
(
i.e
.
the receivin
g
end
)
. The content of the messa
g
e will var
y
with the Bluetoot
h
software installed on the destination device
,
so
p
lease be sure to follow the
instructions
p
rovided. If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e si
m
the one below will appear.
If the business card has been sent successfully, the message below will appear.
Please click on the [OK] button.
Note
Note
Quick Start Guide - Introduction 第 114 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The messa
g
e below will a
pp
ear if the business card transmission was unsuccessf
u
Please click on the [OK] button to close the message, and repeat the procedure.
{Data that have been sent will be saved in a folder for exchan
g
ed business
c
on the destination device.
{You can confi
g
ure an associated a
pp
lication
(
Microsoft Outlook etc
)
to sta
r
automaticall
y
when
y
ou have received a business card
,
allowin
g
y
ou to vie
card details.
You can use Properties under Bluetooth Information Exchan
g
er to confi
g
u
r
whether or not you would like such an application to start automatically.
■Selecting a business card and sending it to a PC or PDA (by right -clickin
g
the mous
e
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Right-click on the business card
y
ou wish to send
,
and then click on its destinati
o
from [to Bluetooth]
Memo
Quick Start Guide - Introduction 第 115 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [to Bluetooth] →[Search other devices
]
Once the devices have been detected
,
the messa
g
e below will a
pp
ear. Plea
s
select the destination device, and then click on the [Send] button.
The business card will be sent.
{When
y
ou tr
y
to send a business card
,
a messa
g
e re
q
uestin
g
p
ermission to
receive the files ma
y
a
pp
ear on the device belon
g
in
g
to the other
p
art
y
(
i.e
.
the receivin
g
end
)
. The content of the messa
g
e will var
y
with the Bluetoot
h
software installed on the destination device
,
so
p
lease be sure to follow the
instructions provided.
If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e similar to the one below
w
appear.
Note
Note
Quick Start Guide - Introduction 第 116 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
If the business card has been sent successfully, the message below will appear.
Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the business card transmission was unsuccessf
u
Please click on the [OK] button to close the message, and repeat the procedure.
{Data that have been sent will be saved in a folder for exchan
g
ed business
c
on the destination device.
■Sending your personal business card
You can
re
are a business card bearin
our name and other details such as
our com
and telephone numbers, and then send it to another party.
zPlease use Properties under Bluetooth Information Exchan
g
er beforehand to confi
g
which data to use for your own business card.
zYou can onl
y
have one business card re
g
istered as
y
our own that is able to be sent
.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
Note
Note
Note
Quick Start Guide - Introduction 第 117 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
　
4. Right-click on the destination icon, and then click on [Send business card To]
In this case, your personal business card will be sent to a PC named "PC -1".
Note
Quick Start Guide - Introduction 第 118 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The business card will be sent.
{When
y
ou tr
y
to send a business card
,
a messa
g
e re
q
uestin
g
p
ermission to
receive the files ma
y
a
pp
ear on the device belon
g
in
g
to the other
p
art
y
(
i.e
.
the receivin
g
end
)
. The content of the messa
g
e will var
y
with the Bluetoot
h
software installed on the destination device
,
so
p
lease be sure to follow the
instructions
p
rovided. If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e si
m
the one below will appear.
{Business cards that have been sent will be saved in the Inbox of the destin
a
party.
If
y
our business card has been sent successfull
y,
the messa
g
e below will a
pp
ear.
Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the business card transmission was unsuccessf
u
Please click on the [OK] button to close the message, and repeat the procedure.
Note
Quick Start Guide - Introduction 第 119 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{Data that has been sent will be saved in a folder for exchan
g
ed business ca
r
the destination device.
■Acquiring a business card from another party
You can use your PC to acquire a business card from a party containing their details.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
Note
Note
Quick Start Guide - Introduction 第 120 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
　
4. Right-click on the icon of the
p
art
y
whose card
y
ou wish to ac
q
uire
,
and then cli
c
[Receive business card]
In this case
,
the business card of the other
p
art
y
will be ac
q
uired from a PC nam
e
"PC-1".
The business card will be received.
{When
y
ou tr
y
to ac
q
uire a business card
,
a messa
g
e re
q
uestin
g
p
ermission
send the files ma
y
a
pp
ear on the device belon
g
in
g
to the other
p
art
y
(
i.e.
,
o
sendin
g
end
)
. The content of the messa
g
e will var
y
with the Bluetooth soft
w
installed on the destination device
,
so
p
lease be sure to follow the instructi
o
provided.
If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e similar to the one below
w
appear.
Note
Note
Quick Start Guide - Introduction 第 121 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
If the business card has been received successfull
y,
the messa
g
e below will a
pp
e
a
Please click on the [OK] button.
The messa
g
e below will a
pp
ear if the business card was unsuccessfull
y
received.
Please click on the [OK] button to close the message, and repeat the procedure.
{Business card data that have been received will be saved in the Inbox und
e
"Object Push".
You can use Properties under the Bluetooth Information Exchan
g
er to set
t
location of the Inbox on the hard drive.
■Exchanging business cards
Simultaneously exchange your business card with one belonging to another party.
1. Turn on the PC or PDA
Confirm that a Bluetooth connection has been enabled before proceeding.
2. Double-click on the Bluetooth Information Exchanger icon on the Desktop
{Alternativel
y,
o
p
enin
g
Ex
p
lorer and clickin
g
on the Bluetooth Information
Exchanger folder will produce the same result.
Note
Note
Quick Start Guide - Introduction 第 122 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The [Bluetooth Information Exchanger] window will appear.
3. Double-click on the [Object Push] icon
A list of devices will appear in the [Object Push] window.
{If the desired device does not a
pp
ear in the list
,
p
lease confirm that the de
v
has been turned on, and then select [Bluetooth] →[Search Devices].
A device search will be performed.
　
4. Right-click on the icon of the
p
art
y
with whom
y
ou wish to exchan
g
e business c
a
and then click on [Object Push]
In this case, the business cards will be exchanged with a PC named "PC -1".
Note
Quick Start Guide - Introduction 第 123 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The business card from the party who executed the "Exchange business cards"
command will be sent first.
{When
y
ou tr
y
to send a business card
,
a messa
g
e re
q
uestin
g
p
ermission to
receive the files ma
y
a
pp
ear on the device belon
g
in
g
to the other
p
art
y
(
i.e
.
the receivin
g
end
)
. The content of the messa
g
e will var
y
with the Bluetoot
h
software installed on the destination device
,
so
p
lease be sure to follow the
instructions provided.
If
y
ou are usin
g
the Bluetooth Utilit
y,
a messa
g
e similar to the one below
w
appear.
A message of confirmation will appear if the card has been successfully sent.
{Business cards that have been sent will be saved in the Inbox of the destin
a
party.
Once
y
our business card has finished bein
g
sent
,
the
p
ro
g
ram will start receivin
g
business card belonging to the other party.
{When a business card is to be received
,
a messa
g
e such as the one below
m
appear on the device belonging to the other party.
Please click on the
[
Yes
]
button if
y
ou
g
ive
p
ermission for the business ca
r
be sent.
A message of confirmation will appear if the card has been successfully received
Note
Note
Note
Quick Start Guide - Introduction 第 124 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
A
message
of
confirmation
will
appear
if
the
card
has
been
successfully
received
{Business cards that have been received will be saved in the "Inbox" under
"Object Push".
You can use Properties under the Bluetooth Information Exchan
g
er to set
t
location of the Inbox on the hard drive.
Note
By connecting a Bluetooth-com
p
atible di
g
ital camera to
y
our PC via Bluetooth
,
y
ou will be
to operate the camera shutter from the PC and transmit the captured images to it as well.
→Connecting the camera
→Taking pictures
→Viewing images saved on your PC
Use the "Remote Camera" tool in the Bluetooth Utilit
to connect the camera to
our P
1. Click on [Start ]→[All Programs]→[Bluetooth]→[Remote Camera]
{In Windows 2000, click on [Start]→[Programs]→[Bluetooth]→[Remote
Camera].
The [Remote Camera] window will appear.
2. Turn on the camera, and set it to be connectable via Bluetooth
Connecting the camera
Procedure
Note
Using a Bluetooth-compatible camera [BIP]
Quick Start Guide - Introduction 第 125 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{Different cameras are o
p
erated in different wa
y
s
,
de
p
endin
g
on the manuf
a
and model used. Please refer to the instruction manual for further details o
n
to operate your camera.
3. Click on the [Camera Search...] button
The camera will be detected and its icon displayed.
4. Right-click on the camera icon, and select [Connect]
The camera will be connected, and images from the camera will appear on -scre
e
Note
Quick Start Guide - Introduction 第 126 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
By placing the mouse cursor over the on -screen ima
g
e
,
the camera's o
p
eratin
g
window
w
appear.
You can operate the camera from this window.
■Taking a single picture
1. Click on the button in the operating window.
A single image will be captured and sent to the PC.
■Taking several consecutive frames
1. Click on the button in the operating window
A succession of images will be captured and sent to the PC.
Taking pictures
Procedure
Quick Start Guide - Introduction 第 127 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{The remote camera shutter cannot be o
p
erated while the camera is connect
e
the PC.
{The number of consecutive
p
ictures taken can be set to an
y
where between
16
{Images are not only sent to the PC, but are stored in the camera's on -boar
d
memory as well.
Please be aware of the remainin
g
memor
y
ca
p
acit
y
when
y
ou are takin
g
a
l
number of pictures.
{Large file sizes are common for high-resolution ima
g
es
,
and ma
y
take so
m
to be transferred to the PC.
Note
1. In the [Remote Camera] window, click on [Bluetooth]→[Pro
p
erti
e
[Consecutive Image Settings]
The
[
Chan
g
e number of consecutive ima
g
es
]
dialo
g
box will a
pp
e
2. Click on the
[
<
][
>
]
buttons to select the number of consecutive i
m
to be captured
Important
Quick Start Guide - Introduction 第 128 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
A "Remote Camera" folder will be created in the "Bluetooth" folder under "M
Docume
during initial set-u
p
. A folder bearin
g
the same name as the camera will be created in it
,
images will be saved in this folder.
Click the
Ex
lorer
button in the
Remote Camera
window to dis
la
the folder where
images have been saved.
zThis window is an exam
p
le showin
g
p
ictures when
[
Filmstri
p]
has been selected f
r
the [View] menu in Explorer.
Viewing images saves on your PC
Note
This section describes how to s
y
nchronize information on
y
our PDA
(
calendars
,
contacts
,
in
b
etc) with your PC using Microsoft ActiveSync.
When
y
ou connect via Bluetooth instead of with a standard cable
,
y
ou will alwa
y
s be able t
o
synchronise your data without the hassle of having to connect the cable.
Synchronising information using ActiveSync [SPP]
Quick Start Guide - Introduction 第 129 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
→Connecting using ActiveSync
→Establishing a partnership between ActiveSync and a PDA
→Finishing an ActiveSync connection
→Cancelling a partnership
zPlease use ActiveS
y
nc v.3.7 or hi
g
her. Also
p
lease establish a
p
artnershi
p
between the
devices using a USB or infrared link before you connect via Bluetooth.
zPlease refer to the ActiveS
y
nc Hel
p
or other manuals for information on how to use th
e
application.
zMicrosoft Outlook 2002 or another schedule mana
g
ement tool must also be installed o
n
PC.
Both the PC and PDA must be set up in order for a connection to be established.
■Preparing the PC
1. On the PC, click on [Start]→[All Programs]→[Microsoft ActiveSync]
The initial ActiveSync set-up window will appear.
It is assumed in the ex
p
lanation below that no ActiveS
y
nc connections have bee
n
established with other devices.
2. Click [File]→[Connection Settings]
Important
Connecting using ActiveSync
Procedure
Quick Start Guide - Introduction 第 130 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The [Connection Settings] window will appear.
3. Place a check next to
[
Allow serial cable or infrared connection to this COM
p
o
r
and then select "COM7".
{In the standard set-u
p,
the
p
ort is confi
g
ured to "COM7"
(
refer to Ste
p
s
(
3
)
(
4
)
under "Pre
p
arin
g
the PDA" below
)
. When usin
g
a different
p
ort
,
p
lease
change the port number selected in this window.
■Preparing the PDA
1. Tap on the Bluetooth icon in the bottom right of the screen
Note
Procedure
Quick Start Guide - Introduction 第 131 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
{The graphic above shows an example of a PDA operating window.
The connection
p
rocedure ma
y
be different de
p
endin
g
on the manufacture
r
model of PDA
y
ou use. Please refer to the
p
roduct instruction manuals for
further details.
The [Bluetooth Settings] window will open.
The messa
g
e "Connection not re
g
istered" will a
pp
ear if no Bluetooth device has
registered.
Please tap on [OK] to close the message.
2. Double click on [Tools]→[Search for peripheral components]
Important
Quick Start Guide - Introduction 第 132 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The application searches for nearby Bluetooth devices.
3. Tap and hold on the destination PC icon, and then select [Update Services]
A search for services will be carried out
,
and then a list of service names and the
connection status will appear as list in the lower window.
4. Ta
p
and hold on "COM7" from the list of service names
,
and then select "Re
g
ist
e
ActiveSync".
Quick Start Guide - Introduction 第 133 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
5. Tap [OK] in the confirmation message window
An ActiveSync connection will be initiated.
Once a connection has been successfully established with a PDA, the procedure for
establishin
a
artnershi
with the PDA will be started b
the ActiveS
nc a
lication on
PC.
Performing this set-u
p
p
rocedure will enable data to be s
y
nchronised between
y
our PC
a
PDA.
1. In the [New Partnership (Set Up a Partnership)] window, select "Standard
partnership", and then click on the [Next] button
Establishing a partnership between ActiveSync and a PDA
Procedure
Quick Start Guide - Introduction 第 134 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
New Partnershi
p
(
S
p
ecif
y
Data S
y
nchronisation Method
)]
window will a
ppe
2. Select "Synchronise with this PC", and then click on the [Next] button
The [New Partnership (Select Synchronisation Settings)] window will appear.
3. Select the t
yp
e of information to be s
y
nchronised between
y
our PC and PDA
,
an
d
click on the [Next] button
Quick Start Guide - Introduction 第 135 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The [New Partnership (Completing Setup)] window will appear.
4. Click on the [Finish] button
When
y
ou click on the
[
Finish
]
button
,
ActiveS
y
nc will be
g
in to s
y
nchronise
y
o
u
information.
[Confirming changes]
　　　　　　　　　　↓
　　　　　　　　(Synchronisation process)
　　　　　　　　　　↓
[Synchronisation complete]
Quick Start Guide - Introduction 第 136 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
While the ActiveSync connection is active, synchronisation will be performed
whenever information is changed on either the PC or the PDA.
Once a
p
artnershi
p
has been established
,
ever
y
time
y
ou start
y
our PC
(
and PDA
thereafter
,
a Bluetooth connection will be o
p
ened and ActiveS
y
nc will s
y
nchroni
your information.
Follow the
rocedure below on
our PDA if
ou want to end an ActiveS
nc connection
manually.
1. Ta
p
and hold on "COM7" in the Bluetooth Settin
g
s window
,
and select
[
ActiveS
y
Release]
Finishing an ActiveSync connection
Procedure
Cancelling a partnership
Quick Start Guide - Introduction 第 137 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
partnership between your PC and PDA.
1. Click on [File]→"Delete partnership"
Click on the [Yes] button when the confirmation message appears.
{If
y
ou wish to create another ActiveS
y
nc connection
,
y
ou will have to re
pe
above procedure to re-establish a partnership.
　
Procedure
Note
This section provides a description of how to use a Bluetooth -com
p
atible wireless headset t
o
communicate (chat) using Microsoft NetMeeting or other software.
→Registering the headset
→Making a connection to the headset
→Disconnecting from the headset
Registering the headset
Using a headset to communicate [HSP]
Quick Start Guide - Introduction 第 138 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
1. Right-click on the Bluetooth icon in the tasktra
y,
then click on
[
Add New Conn
e
Wizard]
{Alternativel
y,
y
ou can click on
[
Start
]
>
[
All Pro
g
rams
]
>
[
Bluetooth
]
>
[
Bluet
o
Settin
g
s
],
then click on
[
New Connection
]
in the
[
Bluetooth Settin
g
s
]
scre
e
has opened.
The
[
Add New Connection Wizard
(
Welcome to the Add New Connection Wiza
r
screen will appear.
2. Turn the headset power on
Once
y
ou have turned on the headset
,
set the mode to enable a Bluetooth connec
t
{The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult
y
our user
g
uide for a detailed descri
p
tion of how to o
p
erate
unit.
3. Confirm that [Express Mode] has been selected, then click on the [Next] button
Procedure
Note
Important
Quick Start Guide - Introduction 第 139 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
Add New Connection Wizard
(
Searchin
g
for Bluetooth Devices
)]
screen w
i
appear.
Once the device search has been com
p
leted
,
the
[
Add New Connection Wizard
(S
a Device)] screen will appear.
4. Select the name of the headset device from the list
,
then click on the
[
Next
]
butt
o
5. Answering with the headset
If the service has been
p
ro
p
erl
y
detected
,
a screen will a
pp
ear indicatin
g
that the
headset is being called, and a tone will accordingly sound in the headset.
Quick Start Guide - Introduction 第 140 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Please press the headset switch.
{The procedure for operating the headset may differ depending on the
manufacturer and model.
Please consult
y
our user
g
uide for a detailed descri
p
tion of how to o
p
erate
unit.
The
[
Add New Connection Wizard
(
Confi
g
urin
g
(
Connectin
g
to Voice Circuit
))]
screen will appear, and device configuration will be performed.
{If
y
ou are connectin
g
to the headset for the first time
,
or if another Blueto
o
audio device has not
y
et been re
g
istered
,
the followin
g
[
Found New Hard
w
Wizard
]
screen will a
pp
ear
,
from which
y
ou can
p
roceed to install the driv
e
If another audio device has alread
y
been re
g
istered
(
i.e.
,
the driver has bee
n
installed), you can proceed to Step 9 without having to install the driver.
6. Click on the [Next] button
The [Install Hardware] screen will appear.
7. Click on the [Continue Anyway] button
The followin
g
screen will a
pp
ear automaticall
y
. You ma
y
disre
g
ard it and click
o
[Continue Anyway] button.
Important
Note
Quick Start Guide - Introduction 第 141 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
Add New Connection Wizard
(
Com
p
letin
g
the Found New Hardware Wiza
r
screen, which is the final screen of the installation wizard, will appear.
8. Click on the [Finish] button
Once driver installation is complete, the [Add New Connection Wizard (Enter
Connection Name)] will appear.
9. Confirm the information you have entered, and click on the [Next] button
Quick Start Guide - Introduction 第 142 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
The
[
Add New Connection Wizard
(
Com
p
letin
g
the Add New Connection Wiza
r
screen will appear.
10. Click on the [Finish] button
The confi
g
uration information will be re
g
istered
,
and an icon will be dis
p
la
y
ed i
n
[Bluetooth Settings] screen.
You can make a connection to the headset from an icon that has been re
istered in
Blue
Settings].
zBefore makin
g
a connection to the headset
,
p
lease check that
y
ou have turned on t
h
headset's power, and that it has been enabled for a Bluetooth connection.
Please ensure that the following audio -related a
pp
lications have been closed befor
e
connect the headset to your PC.
{Windows Media Pla
y
er
,
BeatJam
,
InterVideo WinDVD and other music/aud
i
playback software
{Windows Messenger and other e-conferencing software
If
y
ou wish to use these a
pp
lications
,
p
lease terminate the headset connection befo
r
launch them.
1. Right-click on the headset icon, then click on [Connect].
Making a connection to the headset
Important
Procedure
Quick Start Guide - Introduction 第 143 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
2. Answer with the headset
A screen will appear indicating that the headset is being called, and a tone will
accordingly sound in the headset.
Please press the headset switch.
If the connection has been
p
ro
p
erl
y
established
,
the icon's a
pp
earance will chan
ge
indicate a connected state.
You may now launch conferencing and voice -recognition software and use the
headset.
Please follow the steps below to disconnect from the headset.
1. Right-click on the headset icon in the
[
Bluetooth Settin
g
s
]
screen
,
then click on
[Disconnect].
Disconnecting from the headset
Procedure
Quick Start Guide - Introduction 第 144 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
A messa
g
e will a
pp
ear
,
re
q
uestin
g
confirmation that
y
ou wish to disconnect. Cli
c
the [Yes] button.
The icon on the
[
Bluetooth Settin
g
s
]
screen will a
pp
ear as shown below
,
indicati
n
that the device has been disconnected.
This section describes
p
ossible causes and countermeasures to be considered when
y
our Blu
e
device cannot be confi
g
ured
p
ro
p
erl
y,
functions abnormall
y
or
p
resents other
p
roblems relat
e
its operation.
The section "What you need to know about using Bluetooth " describes the basic conce
p
be aware of when usin
Bluetooth. Should
ou still encounter
roblems after havin
rea
throu
h this information
lease refer to the followin
list
which has been arran
ed acc
to application.
zGeneral operation of the Bluetooth Utility
zUsing a wireless modem station
zUsing an access point
zUsing a printer
zUsing a Bluetooth headset
zUsing a keyboard or mouse
zUsing a camera
zUsing a PDA
zUsing a mobile telephone
Basic understanding
Troubleshooting by application
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
Important
Bluetooth Manager
Troubleshooting
General operation of the Bluetooth Utility
Quick Start Guide - Introduction 第 145 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zIf the Bluetooth icon does not a
pp
ear in the task tra
y,
Bluetooth Mana
g
er will not
b
active, which will prevent you from being able to use any of the functions of the
Bluetooth Utility.
Start the utilities as instructed below to enable Bluetooth Mana
g
er to start automat
i
and allow all functions to be utilized.
Bluetooth Settings
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Bluetooth Settings]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Bluetooth Settings]
Remote Camera
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Remote Camera]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Remote Camera]
Wireless File Transfer
(from Windows XP)
[Start] > [All Programs] > [Bluetooth] > [Wireless File Transfer]
(from Windows 2000)
[Start] > [Programs] > [Bluetooth] > [Wireless File Transfer]
zThe wireless communication switch is turned off.
Please switch it on.
zThe other device(s) may have been set to Non -discoverable mode.
Please check the mode settings on the device.
zThe other device ma
y
be usin
g
a
p
rofile that is not su
pp
orted b
y
the Bluetooth Util
Please check the profile being used on the other device.
zThe following profiles are compatible with Bluetooth Settings.
DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIP
Devices runnin
g
p
rofiles other than those above will not be able to be re
g
istered w
i
Bluetooth Settings.
Bluetooth icon does not appear in task tray
Bluetooth Settings
Clicking on the [New Connection] button brings up the message "Unable to prepare
Bluetooth."
Remote device(s) cannot be detected
Services on a remote device are undiscoverable
Bluetooth Information Exchanger
An error occurs when
y
ou tr
y
to send a file usin
g
the ri
g
ht -click menu.
Quick Start Guide - Introduction 第 146 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zSelect and right-click on a file
,
and then
y
ou can choose either the FTP or OPP
p
r
o
use when you click on [Send to Bluetooth Device].
If neither
p
rofile is su
pp
orted b
y
the destination device
,
the file will not be able to
b
sent from the right-click menu.
The transmission will also fail if you use FTP to send a file to a device that only
supports the OPP profile.
Should this occur, please click on [Bluetooth] →[Profiles
]
under
[
Bluetooth Infor
m
Exchanger] to configure the Transfer mode.
zThe other device may have a certain security level enforced (Non -connectable m
o
etc). Please confirm the security settings of the other device.
Please enter the correct password if you are asked to enter one.
zSee "Using a camera"
zA maximum of 64 virtual COM
p
orts can be added. You will be unable to add ano
port if 64 ports have already been configured.
yy g g
Cannot open shared folder on remote device using [File Transfer].
Remote Camera
Bluetooth Local COM
Cannot add port
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
zIf the modem station is connected to and is bein
g
used b
y
another device
,
the mod
e
station will be undetectable even if you search for it.
zIf the modem station is connected to and is bein
g
used b
y
another device
,
no other
device will be able to connect to the modem station
Important
Modem station cannot be detected
Cannot connect to modem station
Using a wireless modem station
Quick Start Guide - Introduction 第 147 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
device
will
be
able
to
connect
to
the
modem
station
.
zThe Bluetooth
p
asske
y
(
PIN code
)
com
p
rises a se
q
uence of al
p
hanumeric characte
r
with the letters able to be rendered in upper and lower case.
If
[
Ca
p
s Lock
]
is on
,
the Bluetooth
p
asske
y
ma
y
not be able to be entered correctl
y
zPlease ensure that the tele
p
hone cable is connected from the socket to the "LINE"
terminal on the modem station.
{If the tele
p
hone cable has come loose because it has not been full
y
inserted i
n
the socket
,
the resultin
g
p
oor contact ma
y
p
revent data from bein
g
transmitt
e
accurately.
{Communication will be im
p
ossible if the interior of the cable has been broke
Please replace the cable with another one.
zPlease ensure that the two slide switches on the underside of the main unit have be
to the "NORMAL" and "MODEM" positions respectively.
zThe tele
p
hone number of the connection
(
i.e.
,
the tele
p
hone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
zThe user ID and/or
p
assword for the
p
rovider with whom
y
ou have si
g
ned u
p
ma
y
been entered incorrectly. Please check the user ID and password.
zThe default connection ma
y
have been confi
g
ured with different settin
g
s. Please s
e
connection configured for mobile telephone use as the default connection.
zWhen
y
ou
p
lace a call usin
g
a com
p
an
y
switchboard or other exchan
g
e
,
the s
y
ste
m
re
q
uire
y
ou to enter a "0" before the tele
p
hone number itself. Please check the t
ype
telephone line you are using.
zOnce
y
ou have re
g
istered a wireless modem station as
y
our fax server
,
y
ou will ne
e
enter the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to "Using a modem station for fax transmissions " for information on
t
configuration procedure.
zThe tele
p
hone number of the fax destination ma
y
have been entered incorrectl
y
. Pl
check the telephone number.
zIf the setting under COM Auto Connect Settings has been set to "Off"
,
a connecti
o
not automatically be established with the modem. Please connect to the modem
manually.
zWhen
y
ou
p
lace a call usin
g
a com
p
an
y
switchboard or other exchan
g
e
,
the s
y
ste
m
re
q
uire
y
ou to enter a "0" before the tele
p
hone number itself. Please check the t
ype
telephone line you are using.
Bluetooth passkey entry failed
Cannot connect to telephone line
Note
Cannot connect to the Internet
Cannot send or receive faxes
Quick Start Guide - Introduction 第 148 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zThe fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the
[
Fax
]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right-click on the modem
y
ou wish to use
,
and the
on [Properties]
3. Select the
[
Send
]
tab
,
and then confirm that "Enable device to send" has b
e
checked.
Quick Start Guide - Introduction 第 149 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
4. Select the
[
Receive
]
tab
,
and then confirm that "Enable device to receive"
h
been checked (when you wish to receive faxes)
5. Click on the [OK] button
Pl f "
Wh d k b i Bl h
"f d di
Important
Using an access point
Quick Start Guide - Introduction 第 150 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
z
Pl
ease re
f
er to
"
Wh
at
y
ou nee
d
to
k
now a
b
out us
i
n
g
Bl
uetoot
h
"
f
or an un
d
erstan
di
the basic concepts to be aware of when using Bluetooth.
zIf the access
p
oint is connected to and is bein
g
used b
y
another device
,
the access
p
will be undetectable even if you search for it.
zIf the access
p
oint is connected to and is bein
g
used b
y
another device
,
no other d
e
will be able to connect to the access point.
zThe LAN cable ma
y
not be
p
ro
p
erl
y
connected to the access
p
oint. Please check t
h
connection status.
{If the LAN cable has come loose because it has not been full
y
inserted into t
h
socket, the resulting poor contact may prevent data from being transmitted
accurately.
{Communication will be im
p
ossible if the interior of the LAN cable has been
broken. Please replace the cable with another one.
zThe access
p
oint ma
y
not have been confi
g
ured correctl
y,
and ma
y
not be able to
maintain the connection to the LAN.
Please refer to the
p
roduct instruction manual for information on how to confi
g
ure
access point.
zIf
y
ou are usin
g
a LAN to connect to the Internet
,
the LAN environment of the co
m
or location where
y
ou are tr
y
in
g
to establish the connection ma
y
re
q
uire
y
ou to co
n
via a proxy server .
Please click here for information on configuring a proxy server.
Access point cannot be detected
Cannot connect to access point
Cannot connect to LAN
Note
Cannot connect to the Internet
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
Important
Pi b d d
Using a printer
Quick Start Guide - Introduction 第 151 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zIf the
p
rinter is connected to and is bein
g
used b
y
another device
,
the
p
rinter will b
undetectable even if you search for it.
zIf the
p
rinter is connected to and is bein
g
used b
y
another device
,
no other device
w
able to connect to the printer.
zThe
p
rinter driver of the
p
rinter
y
ou are usin
g
ma
y
not have been installed correctl
y
Please refer to your product instruction manual and re -install the driver.
zPlease check to see if the
p
rinter has run out of
p
a
p
er
,
ink or other consumable ite
m
zIf
y
ou are usin
g
a
p
rinter while several Bluetooth devices are connected to the PC
,
devices ma
y
not functional normall
y
. Please disconnect the other devices and tr
y
t
o
again.
P
r
i
nter cannot
b
e
d
etecte
d
Cannot connect to printer
Cannot print/garbled print output
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
zIf the Bluetooth Headset is connected to and is bein
g
used b
y
another device
,
the
Bluetooth Headset will be undetectable even if you search for it.
zIf the Bluetooth Headset is connected to and is bein
g
used b
y
another device
,
no o
t
device will be able to connect to the Bluetooth Headset.
zA Bluetooth connection will be im
p
ossible if the Bluetooth Headset is connected t
o
power adaptor.
Please remove the power adaptor and re -connect.
zUsin
g
a Bluetooth headset with other Bluetooth devices ma
y
cause
p
roblems such
a
interruptions in sound, reduced transfer speed or failure during file transfer, and
Important
Bluetooth Headset cannot be detected
Cannot connect to Bluetooth Headset
Sound cuts out/cannot hear anything
Using a Bluetooth Headset
Quick Start Guide - Introduction 第 152 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
disconnection of the other Bluetooth devices. We stron
g
l
y
recommend usin
g
a Blu
e
headset on its own, not in connection with other Bluetooth devices.
zPlease confirm that the Bluetooth Headset is bein
g
o
p
erated correctl
y
(
for exam
p
le
ensure that the correct mode
(
audio or communications
)
mode has been selected
)
.
zPlease confirm that the voice file or CD is bein
g
p
la
y
ed back normall
y
on
y
our PC
zPlease check the volume settings on your Bluetooth Headset and PC.
zIf Windows Media Player or another audio -related a
pp
lication is active when
y
ou
connect
y
our Bluetooth Headset
,
y
ou ma
y
find it im
p
ossible to connect
p
ro
p
erl
y
t
o
Bluetooth Headset, or even to use it at all.
Please start such applications after you have connected to the Bluetooth Headset.
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
zIf the ke
y
board or mouse is connected to and is bein
g
used b
y
another device
,
the
keyboard or mouse will be undetectable even if you search for it.
zIf the ke
y
board or mouse is connected to and is bein
g
used b
y
another device
,
no
o
device will be able to connect to the keyboard or mouse.
Important
Keyboard or mouse cannot be detected
Cannot connect to keyboard or mouse
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
Important
Ctbdttd
Using a keyboard or mouse
Using a camera
Quick Start Guide - Introduction 第 153 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zIf the camera is connected to and is bein
g
used b
y
another device
,
the camera will
b
undetectable even if you search for it.
zIf the camera is connected to and is bein
g
used b
y
another device
,
no other device
w
be able to connect to the camera.
zThe memory card in the camera may be full.
Please make a backu
p
of all
y
our necessar
y
data on alternative media
,
then delete
t
images from the memory card, and ascertain how much free space remains.
zThe camera ma
y
not have been set to remote camera mode
(
ima
g
e browse mode
,
configuration mode, etc).
Certain cameras will end the Bluetooth connection automaticall
y
if
y
ou chan
g
e the
settings in a mode other than remote camera mode. Please re -connect to the came
r
when you next wish to use the device in remote camera mode.
C
amera canno
t
b
e
d
e
t
ec
t
e
d
Cannot connect to camera
Images from the camera can be displayed, but no pictures can be taken
Camera images do not appear in window
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
zPlease confirm that you have installed ActiveSync v3.7 or higher on your PC.
zActiveSync is installed to COM7 as a default. Please refer to " Synchronising
information using ActiveSync" and re-configure your ActiveSync connection.
If a
p
ort other than COM7 has been used
,
p
lease amend the ActiveS
y
nc connectio
n
settings accordingly.
zThe t
yp
e of file sent to
y
our PDA
,
as well as the
p
rofile used to send the file
,
ma
y
where folders saved on your PDA are located.
Important
Cannot make an ActiveSync connection
Cannot locate a saved file
Using a PDA
Quick Start Guide - Introduction 第 154 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
Examples:
Ima
g
es transferred to
y
our PDA usin
g
"Ima
g
e transfer" > saved in the "Ima
g
e tran
s
folder
Ima
g
es transferred to
y
our PDA usin
g
"File transfer" > saved in the "Shared folde
r
zPlease refer to "What you need to know about using Bluetooth " for an understand
i
the basic concepts to be aware of when using Bluetooth.
zIf the mobile tele
p
hone is connected to and is bein
g
used b
y
another device
,
the m
o
telephone will be undetectable even if you search for it.
zIf the mobile tele
p
hone is connected to and is bein
g
used b
y
another device
,
no ot
h
device will be able to connect to the mobile telephone.
zPlease use the a
pp
ro
p
riate transfer method
,
accordin
g
to the
p
rofiles su
pp
orted b
y
y
mobile telephone.
If OPP is supported: right-click on a file to send it
If BIP is su
pp
orted: use "Ima
g
e transfer" under Bluetooth Information Exchan
g
er t
send images
zThe tele
p
hone number of the connection
(
i.e.
,
the tele
p
hone number for the access
of your Internet service provider) may not be correct. Please check the telephone
number.
zThe user ID and/or
p
assword for the
p
rovider with whom
y
ou have si
g
ned u
p
ma
y
been entered incorrectly. Please check the user ID and password.
zThe default connection ma
y
have been confi
g
ured with different settin
g
s. Please s
e
connection configured for mobile telephone use as the default connection.
Important
Mobile telephone cannot be detected
Cannot connect to mobile telephone
Cannot send images to mobile telephone
Cannot connect to the Internet
Cannot send or receive faxes
Using a mobile telephone
Quick Start Guide - Introduction 第 155 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
zOnce
y
ou have re
g
istered a mobile tele
p
hone as
y
our fax server
,
y
ou will need to
e
the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to "Using a modem station for fax transmissions " for information on
t
configuration procedure.
zThe tele
p
hone number of the fax destination ma
y
have been entered incorrectl
y
. Pl
check the telephone number.
zIf the setting under COM Auto Connect Settings has been set to "Off"
,
a connecti
o
not automatically be established with the modem. Please connect to the mobile
telephone manually.
zThe fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right -click on the
[
Fax
]
and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right-click on the modem
y
ou wish to use
,
and the
on [Properties]
Cannot
send
or
receive
faxes
Quick Start Guide - Introduction 第 156 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
3. Select the
[
Send
]
tab
,
and then confirm that "Enable device to send" has b
e
checked.
4. Select the
[
Receive
]
tab
,
and then confirm that "Enable device to receive"
h
been checked when you wish to receive faxes)
5. Click on the [OK] button
Quick Start Guide - Introduction 第 157 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
This glossary provides definitions for Bluetooth -related terminology.
You will be able to look up the meanings of any uncertain terms here.
A2DP Profile
Abbreviation of Advanced Audio Distribution.
A Bluetooth
p
rofile allowin
g
y
ou to ad
j
ust the sound
q
ualit
y
of wireless headsets and o
t
audio devices.
AVRCP Profile
Abbreviation of Audio/Video Remote Control Profile. A Bluetooth
p
rofile enablin
g
re
m
control functions to be sent and received. Remote control commands can be received b
y
Bluetooth Utility.
Bluetooth Profile
A s
p
ecification that
g
uarantees the connection to the service function of a remote Bluet
o
device.
For a Bluetooth device to send and receive information to and from another device
,
bot
h
devices must support shared profiles designated for each function, such as dial -up
networking, faxing, printing and human interface devices.
DHCP
Abbreviation of Dynamic Host Configuration Protocol
DHCP is a function that automaticall
y
sets u
p
IP addresses. This function will allow
y
o
u
avoid having to set up IP addresses on each computer.
DUN P fil
Glossary
Quick Start Guide - Introduction 第 158 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
DUN
P
ro
fil
e
A Bluetooth profile for Dial-up Networking.
This profile enables you to establish a dial -u
p
Bluetooth connection with a wireless m
o
station, mobile telephone, or similar device.
FAX Profile
A Bluetooth
p
rofile that enables
y
ou to establish a Bluetooth connection with a wireles
s
modem station, mobile telephone, or similar device to send or receive a fax.
FTP
Abbreviation of File Transfer Profile.
A Bluetooth
p
rofile that enables
y
ou to browse folders on a wireless device and transfe
r
to and from the local device.
GAVDP Profile
Abbreviation of Generic Audio-Video Distribution Profile. This is a Bluetooth profile.
HCRP
Abbreviation of Hardco
py
Cable Re
p
lacement Profile. A Bluetooth
p
rofile that establis
h
connection to a device only when you print, unlike SPP (Serial Port Profile).
HID Profile
Abbreviation of Human Interface Device Profile.
A Bluetooth
p
rofile that enables
y
ou to connect to a wireless mouse
,
ke
y
board or other
i
device.
Quick Start Guide - Introduction 第 159 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
LAP
Abbreviation of LAN Access Profile.
A Bluetooth
p
rofile that enables
y
ou to establish a Bluetooth connection to a LAN acce
s
point to access a LAN via PPP.
OPP
Passkey
Also known as a PIN code
This is a
p
assword consistin
g
of u
p
to 16 al
p
hanumeric characters that enables a conne
c
to be established to a wireless device. You need to know the
p
asske
y
in order to connec
device that requires authentication.
Even when the authentication settin
g
has been disabled in the User Mode Pro
p
erties of
t
Bluetooth Utilit
y,
the
p
asske
y
entr
y
dialo
g
box will a
pp
ear automaticall
y
if authenticati
o
re
q
uired
,
enablin
g
y
ou to authenticate a device. A link ke
y
will be created once
y
ou ha
v
authenticated a device
,
eliminatin
g
the need for a
p
asske
y
to connect to that device in t
h
future.
Pairing
A securit
y
function. In order for Bluetooth devices to authenticate each other
,
a
p
asske
y
code
)
is entered in each terminal when the
y
are connected for the first time
,
and a secre
t
bit link key is generated. This action is known as "pairing."
SPP
Abbreviation of Serial Port Profile.
A Bluetooth
p
rofile that enables communication with a device throu
g
h a virtual serial
po
configured
for
a
Bluetooth
connection.
This
can
be
used
for
printers
and
printer
adapters
Abbreviation of Object Push Profile.
A Bluetooth
p
rofile that enables
y
ou to exchan
g
e business cards with a wireless device.
Quick Start Guide - Introduction 第 160 頁，共 160 頁
file://C:\Documents and Settings\anitachou\Local Settings\Temp\~hh3F24.htm 2004/11/30
configured for a Bluetooth connection. This can be used for printers and printer adapters
PDAs, using a method different from HCRP or ActiveSync .
TCP/IP
Abbreviation of Transmission Control Protocol/Internet Protocol.
Standard communications
p
rotocol
(
convention for enablin
g
data communication
)
used
Internet. Usin
g
the same
p
rotocol enables com
p
uters to exchan
g
e data with each other.
vCARD
Common standard for electronic business cards.
Names
,
(
e
)
mail addresses
,
tele
p
hone numbers and other information are exchan
g
ed in t
h
form of electronic business cards
(
in *.vcf format
),
allowin
g
all
p
arties to easil
y
re
g
iste
r
other's data in their address books.
The standard is extensivel
y
com
p
atible with Microsoft Outlook
,
Lotus Or
g
anizer and ot
h
mail/schedule management software.

Navigation menu