Abocom Systems BSR202 Bluetooth Stereo Receiver User Manual bsr202 receiver indd

Download:
Mirror Download [FCC.gov]
Document ID	542725
Application ID	84+y57CjfonRB3tRPNNSzg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.22kB (465221 bits)
Date Submitted	2005-05-17 00:00:00
Date Available	2005-05-17 00:00:00
Creation Date	2005-04-28 16:50:23
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2005-05-16 11:01:18
Document Title	bsr202-receiver.indd
Document Creator	Adobe InDesign CS (3.0.1)

1—Check the package contents
3—Turn on the power
Unpack the Bluetooth Stereo Receiver and
check that the following items are included:
To turn on the power, press and hold the
power until the power LED lights blue.
To turn off the power, press and hold the
power button until the power LED turns off.
Power button
Volume +/-
Bluetooth Stereo
Receiver
Quick Guide
USB Cable
Play
Mute on/off
Earphone jack
Power Adapter
DC jack
Power/
Batter LED
Line-out jack
Blue LED power is on
Blue flashing LED connected to device
Red LED battery is charging, turns off when
charged
Red flashing LED battery is low, recharge
before LED turns off
2—Charge the battery
4—Pair (make connection) with receiver
The battery lasts eight hours and is recharged using the power adapter or the
USB cable. To recharge:
Plug the USB cable into the DC jack on
the Bluetooth Stereo Receiver and connect
the other end to your PC.
or
Plug the power adapter into the DC jack
on the Bluetooth Stereo Receiver and connect the other end to an electrical outlet.
The Bluetooth Stereo Receiver can be used
with a bluetooth transmitter or Bluetooth
Audio Dongle. On first use, the devices must
be paired.
To pair the devices.
1. Connect your receiver to an audio device.
2. Turn on the power on your Bluetooth
Stereo Receiver.
3. Turn on the power on the transmitter.
Recharging takes 90 minutes.
5—Wait for devices to connect
7—Troubleshooting
The devices connect (pair) after 90 seconds.
90 seconds
6—Using with your mobile phone
The Bluetooth Stereo Receiver can be used
If the Bluetooth Stereo Receiver does not
work, try the following:
- Ensure connecting devices are charged
- Turn off all devices and then turn them on
in the order shown in this guide
- Ensure devices are within the 10-meter
range
8—Specifications
Standards
Bluetooth specification V1.2 compliant.
Bluetooth A2DP profile (AV Profile)
Bluetooth AVRCP profile
Headset and Hand free
Tx Power
0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity
< -80dBm (BER 0.1%)
Distance
> 10m (open space)
Audio Streaming Format
SBC 48.000 kHz
Audio Frequency Range
20Hz ~ 22 kHz
Audio S/N
> 85dB
Audio THD
< -83dB
Audio Output Power
> 20mWrms
Power supply
Supply by integrated rechargeable battery cell. Music plays : > 8 hrs.
Physical Specification:
Dimension: 65.5 mm x 35 mm x 22.5 mm
Environmental Range:
Operating temperature:-10 ~ +50 degrees centigrade
Humidity: Relative humidity 0 ~ 95%
with a Bluetooth enabled mobile phone.
To pair with your phone
1. Enable Bluetooth on your phone (refer to
the phone’s user manual).
2. Turn on the Stereo Receiver.
3. In the phone’s Bluetooth menu, search for
devices.
4. Select Stereo Receiver.
5. Enter the PIN code “0000”.
Answering calls
To answer a call, push the play button.
To end a call, push the power button.
Serial number & Firmware version:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:04:28 16:50:23Z
Creator                         : Adobe InDesign CS (3.0.1)
Modify Date                     : 2005:05:16 11:01:18+08:00
About                           : uuid:31434e3e-2d7d-4754-a6e7-354e5c8bc050
Producer                        : Adobe PDF Library 6.0
Trapped                         : False
Creation Date                   : 2005:04:28 16:50:23Z
Mod Date                        : 2005:05:16 11:01:18+08:00
Metadata Date                   : 2005:05:16 11:01:18+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:1acb4242-b78f-11d9-989a-c10db2e6f088
Instance ID                     : uuid:7fec2acd-9c77-48f7-82d5-bebe81226939
Derived From Instance ID        : 1acb4241-b78f-11d9-989a-c10db2e6f088
Derived From Document ID        : adobe:docid:indd:bc11325b-b2d9-11d9-a394-ffa3098e626b
Format                          : application/pdf
Title                           : bsr202-receiver.indd
Page Count                      : 3

EXIF Metadata provided by EXIF.tools