Accton Technology 7004ACC Barricade 2.4GHz 11Mbps Wireless Cable/DSL Router User Manual SMC7004AWBRV2
Accton Technology Corp Barricade 2.4GHz 11Mbps Wireless Cable/DSL Router SMC7004AWBRV2
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
User Manual Part 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 325885 |
| Application ID | KxEOpveeQ6Dy89cgneSPCQ== |
| Document Description | User Manual Part 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 121.44kB (1517947 bits) |
| Date Submitted | 2003-05-16 00:00:00 |
| Date Available | 2003-05-15 00:00:00 |
| Creation Date | 2003-04-16 01:50:11 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-05-14 18:13:19 |
| Document Title | SMC7004AWBRV2.book |
| Document Creator | FrameMaker 6.0 |
| Document Author: | Geoff |
Advanced Setup The MAC Filtering feature of the Wireless Barricade allows you to control access to your network to up to 32 clients based on the MAC (Media Access Control) Address of the client machine. This ID is unique to each network adapter. If the MAC address is listed in the table, that client machine will have access to the network. URL Blocking To configure the URL Blocking feature, use the table below to specify the websites (www.somesite.com) and/or keywords you want to filter on your network. To complete this configuration, you will need to create or modify an access rule in “Access Control” on page 51. To modify an existing rule, click the Edit option next to the rule you want to modify. To create a new rule, click on the Add PC option. From the Access Control Add PC section check the option for WWW with URL Blocking in the Client PC Service table to filter out the websites and keywords specified below. 53 Configuring the Wireless Barricade Use the above screen to block access to Web sites or to Web URLs containing the keyword specified in the table. Schedule Rule The Schedule Rule feature allows you to configure specific rules based on Time and Date. These rules can then be used to configure more specific Access Control. Enables Schedule-based Internet access control. 1. Click Add Schedule Rule. 2. Define the settings for the schedule rule (as shown on the following screen). 54 Advanced Setup 3. Click OK and then click the APPLY button to save your settings. Intrusion Detection 55 Configuring the Wireless Barricade 56 • SPI and Anti-DoS firewall protection (Default: Enabled) –The Wireless Barricade Intrusion Detection Feature limits access for incoming traffic at the WAN port. When the SPI feature is turned on, all incoming packets will be blocked except for those types marked with a check in the Stateful Packet Inspection section. • RIP Defect (Default: Enabled) – If an RIP request packet is not replied to by the router, it will stay in the input queue and not be released. Accumulated packets could cause the input queue to fill, causing severe problems for all protocols. Enabling this feature prevents the packets accumulating. • Discard Ping from WAN (Default: Disabled) – Prevents a PING on the Gateway’s WAN port from being routed to the network. Advanced Setup • Stateful Packet Inspection – This is called a “stateful” packet inspection because it examines the contents of the packet to determine the state of the communications; i.e., it ensures that the stated destination computer has previously requested the current communication. This is a way of ensuring that all communications are initiated by the recipient computer and are taking place only with sources that are known and trusted from previous interactions. In addition to being more rigorous in their inspection of packets, stateful inspection firewalls also close off ports until connection to the specific port is requested. When particular types of traffic are checked, only the particular type of traffic initiated from the internal LAN will be allowed. For example, if the user only checks FTP Service in the Stateful Packet Inspection section, all incoming traffic will be blocked except for FTP connections initiated from the local LAN. Stateful Packet Inspection allows you to select different application types that are using dynamic port numbers. If you wish to use the Stateful Packet Inspection (SPI) to block packets, click on the Yes radio button in the “Enable SPI and Anti-DoS firewall protection” field and then check the inspection type that you need, such as Packet Fragmentation, TCP Connection, UDP Session, FTP Service, H.323 Service, and TFTP Service. • When hackers attempt to enter your network, we can alert you by e-mail – Enter your E-mail address. Specify your SMTP and POP3 servers, user name, and password. 57 Configuring the Wireless Barricade • 58 Connection Policy – Enter the appropriate values for TCP/ UDP sessions as described in the following table. Parameter Defaults Description Fragmentation half-open wait 10 sec Configures the number of seconds that a packet state structure remains active. When the timeout value expires, the router drops the unassembled packet, freeing that structure for use by another packet. TCP SYN wait 30 sec Defines how long the software will wait for a TCP session to synchronize before dropping the session. TCP FIN wait 5 sec Specifies how long a TCP session will be maintained after the firewall detects a FIN packet. TCP connection idle timeout 3600 seconds (1 hour) The length of time a TCP session will be maintained if there is no activity. UDP session idle 30 sec timeout The length of time a UDP session will maintained if there is no activity. H.323 data channel idle timeout The length of time an H.323 session will be maintained if there is no activity. 180 sec Advanced Setup DoS Criteria and Port Scan Criteria Set up DoS and port scan criteria in the spaces provided (as shown below). Parameter Defaults Description Total incomplete TCP/ UDP sessions HIGH 300 sessions Defines the rate of newly unestablished sessions that will cause the software to start deleting half-open sessions. Total incomplete TCP/ UDP sessions LOW 250 sessions Defines the rate of newly unestablished sessions that will cause the software to stop deleting half-open sessions. Incomplete TCP/UDP 250 sessions sessions (per min.) HIGH Maximum number of allowed incomplete TCP/ UDP sessions per minute. Incomplete TCP/UDP 200 sessions sessions (per min.) LOW Minimum number of allowed incomplete TCP/ UDP sessions per minute. Set this to “0” if no minimum setting is required. Maximum incomplete TCP/UDP sessions number from same host Maximum number of incomplete TCP/UDP sessions from the same host. 10 sessions Incomplete TCP/UDP 300 msec sessions detect sensitive time period Length of time before an incomplete TCP/UDP session is detected as incomplete. Maximum half-open fragmentation packet number from same host Maximum number of half-open fragmentation packets from the same host. 30 Half-open fragmentation 1sec detect sensitive time period Length of time before a half-open fragmentation session is detected as half-open. 59 Configuring the Wireless Barricade Parameter Defaults Description Flooding cracker block time 300 sec Length of time from detecting a flood attack to blocking of the attack. DMZ If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can open the client up to unrestricted two-way Internet access. Enter the IP address of a DMZ host to this screen. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort. 60 Advanced Setup DDNS (Dynamic DNS) Settings Dynamic DNS provides users on the Internet with a method to tie their domain name(s) to computers or servers. DDNS allows your domain name to follow your IP address automatically by having your DNS records changed when your IP address changes. Domain Name – A series of alphanumeric strings separated by periods, that is the address of a the Wireless Barricade network connection and that identifies the owner of the address. The section also has a “Server Configuration” section that automatically opens the port options checked in the Virtual Server section. Simply enter in the IP Address of your server, such as a web server, and then click on the port option HTTP Port 80 so users can access your server from the WAN connection (Internet). 61 Configuring the Wireless Barricade This DNS feature is powered by TZO.com. With a DDNS connection you can host your own web site, email server, FTP site, and more at your own location even if you have a dynamic IP address. (Default: Disable) UPnP (Universal Plug and Play) Setting Enable UPnP by checking ON in the screen above. UPnP allows the device to automatically: 62 • dynamically join a network • obtain an IP address • convey its capabilities and learn about the presence and capabilities of other devices.(Default: OFF) Advanced Setup Tools Use the Tools menu to backup the current configuration, restore a previously saved configuration, restore factory settings, update firmware, and reset the Wireless Barricade. Tools - Configuration Tools • Backup – saves the Wireless Barricade’s configuration to a file. • Restore – restores settings from a saved backup configuration file. • Restore to factory defaults – restores the Wireless Barricade settings back to the factory default original. 63 Configuring the Wireless Barricade Tools - Firmware Upgrade Use this screen to update the firmware or user interface to the latest versions. Download the upgrade file from the SMC Web site (www.smc.com) and save it to your hard drive.Click Browse to look for the previously downloaded file. Click APPLY. Check the Status page Information section to confirm that the upgrade process was successful. 64 Advanced Setup Tools - Reset Click APPLY to reset the Wireless Barricade. The reset will be complete when the power LED stops blinking. Note: If you use the Reset button on the front panel, the Wireless Barricade performs a power reset. If the button is held depressed for over five seconds, all the LEDs will illuminate and the factory settings will be restored. Status The Status screen displays WAN/LAN connection status, firmware, and hardware version numbers, illegal attempts to access your network, as well as information on DHCP clients connected to your network. 65 Configuring the Wireless Barricade The following items are included on this screen: Section 66 Description INTERNET Displays WAN connection type and status. GATEWAY Displays system IP settings, as well as DHCP and Firewall status. INFORMATION Displays the number of attached clients, the firmware versions, the physical MAC address for each media interface, as well as the hardware version and serial number. Security Log Displays illegal attempts to access your network. Save Click on this button to save the security log file. Clear Click on this button to delete the access log. Refresh Click on this button to refresh the screen. DHCP Client Log Displays information on all DHCP clients on your network. CONFIGURING THE PRINT SERVER If you want to use the print server built into the Wireless Barricade, then you must first install the Port Monitor program as described in the following section for Windows 95/98/Me/NT/ 2000. To configure the Wireless Barricade Print Server for Windows 95/ 98/Me/NT/2000, or Unix, see “Configure the Print Server” on page 70. Install the SMC Printer Port Monitor Skip this section if you are using Unix. For Windows 95/98/Me/NT/2000 clients, you need to install the port monitor program as described in this section. 1. Insert the installation CD-ROM into your CD-ROM drive. Under the Print Server directory, run the setup.exe program. The SMC Port Monitor installation program advises you to close all other Windows programs currently running on your computer. Click Next to continue. 67 Configuring the Print Server 2. The next screen indicates that the print client uses TCP/IP network protocol to monitor print requests. Click Next. 3. Select the destination folder and click on the Next button. The setup program will then begin to install the programs into the destination folder. 68 Install the SMC Printer Port Monitor 4. Select the Program Folder that will contain the program icon for uninstalling the port monitor, and then click Next. 5. Enter the printer port name that will be used to identify the port monitor in your system, and press Next. 6. When the setup program finishes installing the port monitor, check the radio button to restart your computer and then click OK. 7. After rebooting your computer, add the Wireless Barricade print server to your system as described in the following section. 69 Configuring the Print Server Configure the Print Server The Wireless Barricade’s print server supports Microsoft Windows 95/98/Me/NT/2000, and Unix. If you are using Windows 95/98/Me/NT/2000, first install the port monitor as described in the previous section before adding the Wireless Barricade’s print server to your operating system. Configure the Network Printer in Windows 95/98/Me/ 2000 1. On a Windows 95/98/Me/2000 platform, open the Printers window in the My Computer menu, and double-click the Add Printer icon. 70 Configure the Print Server 2. Follow the prompts to add a Local printer to your system. Specify the printer type attached to the Wireless Barricade. 3. Select the monitored port (the default port name is SMC100) and then click the Create a new port button. 71 Configuring the Print Server 4. Enter the IP address of the Wireless Barricade and click OK, and then click Next in the Add Printer Wizard dialog box. 5. Continue following the prompts to finish installing the Wireless Barricade print server. The printer type you specified will now be added to your Printers menu. Configure the Network Printer in Windows NT 1. On a Windows NT platform, open the Printers window in the My Computer menu, and double-click the Add Printer icon. 2. Follow the prompts to add a local printer to your system. 72 Configure the Print Server 3. Select the monitored port. The default port name is SMC100. Then click the Configure Port button. 73 Configuring the Print Server 4. Enter the IP address of the Wireless Barricade and click OK, and then click Next in the Add Printer Wizard dialog box. 5. Specify the printer type attached to the Wireless Barricade. 6. Continue following the prompts to finish installing the Wireless Barricade print server. The printer type you specified will now be added to your Printers menu. Configure the Network Printer in Unix Systems Follow the traditional configuration procedure on Unix platforms to set up the Wireless Barricade print server. The printer name is lpt1. Configure LPR port on Windows 2000/XP The Wireless Barricade Printer function can also be used with the LPR port on Windows XP and Windows 2000 machines. Below is an outline on how to configure the LPR port on a Windows 2000 machine; however the same steps will apply for a Windows XP. 1. Open the Control Panel. 2. Click on the Printers and Faxes or Printers icon. 74 Configure the Print Server 3. Click on the Add Printer icon to launch the Add Printer Wizard. 4. Click Next button to begin the printer installation process. 5. On the next dialog box, choose the Local Printer option and verify the “Automatically detect and install my Plug and Play printer” option is unchecked. Note: On Windows XP check the “Local printer attached to this computer.” 6. Click the Next button to create a new printer port. 7. Select the Create a New Port option and then select the Standard TCP/IP Port option in the drop down menu. 75 Configuring the Print Server 76 Configure the Print Server 8. When you click the Next button the “Add Standard TCP/IP Printer Port Wizard” will launch. 9. To start this new installation wizard click the Next button. 10. Provide the appropriate IP and Port name information for your new Printer port. If you are using default settings on the router you can use the following information: Printer Name or IP Address: 192.168.2.1 Port Name: IP_192.168.2. Note: This is the IP that you use to administer your router with (for example: 192.168.2.1). If you have changed this IP address then please use the new one that you have assigned to your router. 77 Configuring the Print Server 11. Click the Next button to continue 12. On the next dialog box, under the Device type choose the Custom option 13. Then click the Settings… button to input the Specific Wireless Barricade Printer port information. 78 Configure the Print Server 14. In the Configure Standard TCP/IP Port Monitor dialog box you will need to configure some additional settings. Please confirm these settings below: • Port Name: IP_192.168.2.1* • Printer Name or IP Address: 192.168.2.1* * This should be the same information that was configured in Step 7. • In the Protocol section click on the LPR option • The Raw Settings section should be grayed out • The LPR Settings section should have the Queue Name set to one of 2 options depending on the version of Wireless Barricade you are using. 79 Configuring the Print Server • The Queue Name is LPT1. • Verify the LPR Byte Counting Enabled and SNMP Status Enabled options are unchecked. 15. Once you have verified all of these settings, click the OK button to save these settings and close the “Configure Standard TCP/IP Port Monitor” window. 16. Click Next to continue and view a summary of the configuration that you have just completed. 17. Click the Finish button to complete the configuration process of the TCP/IP port 18. The Add Printer Wizard will now guide you through the Printer Driver installation for the LPR port you just installed. 19. In the dialog box listed below, choose the manufacturer of the printer that you have, and then choose your model of printer. If your printer is not listed here, then please refer to your printer documentation to get your printer installed. 80 Configure the Print Server 20. Once you have your printer listed and selected in this dialog box click the Next button. 81 Configuring the Print Server 21. Name your printer. In this dialog box you will give your installed printer a name; this will be the name this printer is referred to in your Printer folder. 22. Once you have named your printer, click Next to continue. 23. Choose the Do not share this printer option and click the Next button. 24. Choose No to the Print Test Page option, and click the Next button. 25. On the next screen, you should now see a dialog box with a summary of all the printer information that you have just configured. To complete the installation, click the Finish button. 82 Configure the Print Server Once you have completed the printer installation, you will need to configure some properties on your printer. To do so, please follow the steps listed below: 1. If you closed out the Printers window, please re-open it from the control panel. 2. Locate the printer that you just installed and right-mouse click on it and choose Properties. 3. Click on the Advanced tab and verify the following settings: • Both the “Spool print documents so program finishes printing faster” and the “Start printing after last page is spooled” options are selected. • Both the “Print spooled documents first” and “Enable advanced printing features” options are checked. 83 Configuring the Print Server • All of the other options should be disabled or unchecked. 4. Click on the Ports tab and verify that you have the TCP/IP port that you just created selected and the Enable bidirectional support and Enable printer pooling options are unchecked. 5. Click the Apply button to save the settings. 6. Next click on the General tab and click on the Print Test Page button. This will verify that you have successfully setup your LPR printing port, and now you can print through the SMC Wireless Barricade. 84 Configure the Print Server Confirm printer connection On the status page of the web-based login, you can confirm the printer connection to the Wireless Barricade. OK 85 TROUBLESHOOTING The information outlined in this section describes some useful steps for getting your computer and Wireless Barricade online. The information outlined in this section describes common problems you may encounter and possible solutions to them. The Wireless Barricade can be easily monitored through panel indicators to identify problems. If you cannot resolve any connection problems after checking the indicators, then refer to the other sections in the following table. 86 Troubleshooting Troubleshooting Chart Symptom Action LED Indicators Power LED is Off • External power supply has failed or is disconnected. • Check connections between the Wireless Barricade, the external power supply, and the wall outlet. • If the power indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or external power supply. • If the unit powers off after running for a while, check for loose power connections, power losses or surges at the power outlet. • If you cannot isolate the problem, then the external power supply may be defective. In this case, contact SMC Technical Support for assistance. 87 Troubleshooting Troubleshooting Chart Symptom Action LED Indicators Link LED is Off 88 • Verify that the Wireless Barricade and attached device are powered on. • Be sure the cable is plugged into both the Wireless Barricade and the corresponding device. • Verify that the proper cable type is used and its length does not exceed specified limits. • Be sure that the network interface on the attached device is configured for the proper communication speed and duplex mode. • Check the adapter on the attached device and cable connections for possible defects. Replace any defective adapter or cable if necessary. Troubleshooting Troubleshooting Chart Symptom Action Network Connection Problems Cannot Ping the Wireless Barricade from the attached LAN, or the Wireless Barricade cannot Ping any device on the attached LAN Mobile users cannot access the Wireless Barricade • Verify that IP addresses are properly configured. For most applications, you should use the Wireless Barricade’s DHCP function to dynamically assign IP addresses to any host on the attached LAN. However, if you manually configure any IP addresses on the LAN, verify that the same network address (network component of the IP address) and subnet mask are used for both the Wireless Barricade and attached LAN devices. • Be sure the device you want to ping (or from which you are pinging) has been configured for TCP/IP. • Make sure that the Wireless Barricade and all mobile users are configured to use the same radio channel, wireless domain (SSID), and encryption keys. • Ensure that all mobile users are within range of the Wireless Barricade as specified in Appendix C. 89 Troubleshooting Troubleshooting Chart Symptom Action Management Problems Cannot connect using the Web browser Forgot or lost the password • Be sure you have configured the Wireless Barricade with a valid IP address, subnet mask, and default gateway. • Check that you have a valid network connection to the Wireless Barricade and that the port you are using has not been disabled. • Check network cabling between the management station and the Wireless Barricade. • Press the “Reset” button for at least five seconds on the rear panel to restore the factory defaults. • Make sure the parallel cable between the Wireless Barricade and printer is connected and is in good condition Printer Server The printer cannot print or prints garbage 90 Troubleshooting 91 SPECIFICATIONS Below is an outline of the Technical Specifications for the Barricade 2.4GHz 11 Mbps Wireless Cable/DSL Broadband Router (SMC7004AWBR) Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.11b LAN Interface 3 - RJ-45 10/100 Mbps Auto MDI/MDI-X ports WAN Interface 1- RJ-45 10/100 Mbps Auto MDI/MDI-X port Serial, 1 RS-232 DB-9 connector WLAN Interface Standard: IEEE 802.11b, Direct Sequence Spread Spectrum (DSSS) Transmission Rate: 11 Mbps, automatic fallback to 5.5, 2 or 1 Mbps Maximum Channels: US/Canada: 11, Europe (ETSI): 13 Range: Up to 304 m (1000 ft) Frequency: (US/Canada/Europe) 2.400-2.4835 GHz, Japan: 2.471-2.497 GHz Sensitivity: 1, 2, 5.5 Mbps: -80 dBm; 11 Mbps: -76 dBm typical Modulation: CCK, BPSK, QPSK Encryption: 64-bit/128-bit WEP Maximum Clients: 128 Printer Interface Parallel 1 DB-25 printer port Management Web management 92 Specifications Advanced Features Dynamic IP Address Configuration – DHCP, DNS Firewall – Client privileges, hacker prevention and logging Virtual Private Network – PPTP, L2TP, IPSec pass-through Backup Internet Connection – Dial-on-demand via secondary WAN port Printer server Indicator Panel Power WAN: Link/Activity LAN: Link/Activity, 10/100 (Mbps) WLAN Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F) Dimensions 21.91 x 13.34 x 2.54 cm (8.63 x 5.25 x 1 in.) Weight 0.68 kg (1.5 lbs) Input Power 9 V DC (1.0 A) Maximum Current 0.40 A RMS max.@110 V, 0.87 A RMS max.@240 V Power Consumption 10 Watts max. @ 100-240 VAC Heat Dissipation 34.1 BTU/hr max. @ 100-240 VAC Internet Standards ARP (RFC 826), IP (RFC 791), ICMP (RFC 792), UDP (RFC 768), TCP (RFC 793), Telnet (RFC 854-859), MD5 (RFC 1321), 93 Specifications BOOTP Extension (RFC 1497), PPP LCP Extension (RFC 1570), PPPoE (RFC 2516), NAT (RFC 1631), PPP (RFC 1661), HTML (RFC 1866), HTTP (RFC 1945), CHAP (RFC 1944), DHCP (RFC 2131), PPTP (RFC 2637) Temperature Operating (0 to 40 °C), 32 to 104 °F Storage (- 40 to 70 °C), - 40 to 158 °F Humidity 5% to 95% (noncondensing) Compliances CE Mark Emissions FCC Class B Industry Canada Class B EN55022 (CISPR 22) Class B C-Tick - AS/NZS 3548 (1995) Class B ETS 300 328 MPT RCR STD-33 Immunity EN 61000-3-2/3 EN 61000-4-2/3/4/5/6/8/11 Safety UL 1950 EN60950 (TÜV) CSA 22.2 No. 950 94 FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canada (24 hours a day, 7 days a week) (800) SMC-4-YOU; (949) 679-8000; Fax: (949) 679-1481 From Europe (8:00 AM - 5:30 PM UK Time) 44 (0) 118 974 8700; Fax: 44 (0) 118 974 8701 INTERNET E-mail addresses: techsupport@smc.com european.techsupport@smc-europe.com support@smc-asia.com Driver updates: http://www.smc.com/index.cfm?action=tech_support_drivers_downloads World Wide Web: http://www.smc.com http://www.smc-europe.com http://www.smc-asia.com FOR LITERATURE OR ADVERTISING RESPONSE, CALL: U.S.A. and Canada: Spain: UK: France: Italy: Benelux: Central Europe: Nordic: Eastern Europe: Sub Saharian Africa: North West Africa: CIS: PRC (Beijing): PRC (Shanghai): Taiwan: Asia Pacific: Korea: Japan: Australia: India: 38 Tesla Irvine, CA 92618 Phone: (949) 679-8000 (800) SMC-4-YOU; 34-93-477-4935; 44 (0) 1932 866553; 33 (0) 41 38 32 32; 39 (0) 335 5708602; 31 33 455 72 88; 49 (0) 89 92861-0; 46 (0) 868 70700; 34 -93-477-4920; 27 0126610232; 216 71236616; 7 (095) 789 35 73; 86-10-8251-1550; 86-21-6485-9922; 886-2-8797-8006; (65) 6 238 6556; 82-2-553-0860; 81-3-5645-5715; 61-2-8875-7887; 91 22 5696 2790; Fax (949) 679-1481 Fax 34-93-477-3774 Fax 44 (0) 118 974 8701 Fax 33 (0) 41 38 01 58 Fax 39 02 739 14 17 Fax 31 33 455 73 30 Fax 49 (0) 89 92861-230 Fax 46 (0) 887 62 62 Fax 34 93 477 3774 Fax 27-11 314 9133 Fax 216 71751415 Fax 7 (095) 789 35 73 Fax 86-10-8251-1551 Fax 86-21-6495-7924 Fax 886-2-8797-6288 Fax (65) 6 238 6466 Fax 82-2-553-7202 Fax 81-3-5645-5716 Fax 61-2-8875-7777 Fax 91 22 5696 2794 SMC7004AWBR Part Number: 01-111234-001 Revision Number E042003-R01 F 1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2003:05:14 18:13:19+08:00 Create Date : 2003:04:16 01:50:11Z Page Count : 44 Creation Date : 2003:04:16 01:50:11Z Mod Date : 2003:05:14 18:13:19+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : Geoff Metadata Date : 2003:05:14 18:13:19+08:00 Creator : Geoff Title : SMC7004AWBRV2.book Page Mode : UseOutlines Has XFA : NoEXIF Metadata provided by EXIF.tools