Advanced RF Technologies ADRFTECH003 Epoch- M1P Repeater User Manual May 20 2004
Advanced RF Technologies, Inc. Epoch- M1P Repeater May 20 2004
Contents
- 1. Users Manual
- 2. QickStart Guide
- 3. Software Setup Guide
- 4. USB Driver Setup Guide
USB Driver Setup Guide
2607 Colorado Blvd. Los Angeles, CA 90041
TEL: (323) 254-8131 FAX: (323) 254-4928
www.adrftech.com
________________________________________________________________________
USB Driver Setup Guide
Note: Make sure you are not connected to the internet during the driver installation.
1. Connect one end of the USB cable to the M1P USB port and the other end to the PC
USB port.
2. Once both ends of the USB cable are connected, the following window will appear.
Choose Install the software automatically (Recommended) as shown below:
Next, place the installation CD-ROM (included in the box) into your CD drive and click
Next on the hardware wizard.
Advanced RF Technologies, Inc. Proprietary Document
1
2607 Colorado Blvd. Los Angeles, CA 90041
TEL: (323) 254-8131 FAX: (323) 254-4928
www.adrftech.com
________________________________________________________________________
3. The hardware wizard will search automatically and find the correct drivers from the
CD-ROM.
4. When the following window appears:
Click on Continue Anyway.
Advanced RF Technologies, Inc. Proprietary Document
2
2607 Colorado Blvd. Los Angeles, CA 90041
TEL: (323) 254-8131 FAX: (323) 254-4928
www.adrftech.com
________________________________________________________________________
5. After installation has been completed, the following window will appear:
Click FINISH
Advanced RF Technologies, Inc. Proprietary Document
3