Alcatel Canada 39T28A03A22A Alcatel 7390 LMDS Multiservice Broadband Wireless User Manual 3cc12426aaaaTQbja01

Download:
Mirror Download [FCC.gov]
Document ID	175946
Application ID	mTthSkDkyAzEow6jbf2b4A==
Document Description	Base Station User Manual 10 of 14
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	216.48kB (2705966 bits)
Date Submitted	2001-10-24 00:00:00
Date Available	2001-12-11 00:00:00
Creation Date	2001-08-21 11:22:45
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-08-21 11:23:01
Document Title	3cc12426aaaaTQbja01.book
Document Creator	FrameMaker 6.0

7.5 – Sub-band distribution plan
Cross-polarized radio
Down-link
Up-link
LMCS/AB
27 850 ¾ 28 350
27 350 ¾ 27 650
LMCS/F
25 600 ¾ 25 850
25 350 ¾ 25 600
LMCS/C
27 100 ¾ 27 350
26 850 ¾ 27 100
LMDS/A
27 500 ¾ 28 350
31.075 ¾ 31 225
LMDS/B
31 225 ¾ 31 300
31 000 ¾ 31 075
38/700/1
39 700 ¾ 40 000
39 000 ¾ 39 300
(*) : figures given here represent the total bandwidth, i.e. from the lower edge of the lowest channel to
the higher edge of the highest channel.
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
301/346
302
302/346
302
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
Appendix 1 – Installation sheet
A.1.1 – 7390DBS
General information:Operator................. Date..........
Visa..........
........................................................................................
Name
Address
No .........
Operator
Street......................................................
Bld.........
Stair...................
Floor.................
Town .............................................................
Country .........................................................
Site identification
Name of Base Station
Version
Equipment characteristics
Designation
Reference
ICS
Serial No.
Subrack
Fan
PSU 1
PSU 2
CPL
IBS 1
IBS 2
IBS 3
IBS 4
IBS 5
IBS 6
IBS 7
IBS 8
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
303/346
308
Equipment characteristics and onboard software
Designation
Part number
ICS
Serial No.
Downloaded software
ANT 1
ANT 2
TNT 1
TNT 2
TNT 3
TNT 4
AMD 1
AMD 2
AMD 3
AMD 4
AMD 5
AMD 6
AMD 7
AMD 8
304/346
308
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
A.1.2 – 7390 X-Pol RBS
General information:Operator.................. Date.............
Visa..........
...................................................................................
Name
Address
No .........
Bld.........
Operator
Street................................................
Stair...................
Floor...........
Town .............................................................
Country .........................................................
Site identification
Name of Base Station
Version
Equipment characteristics
Initial configuration (1+0):
Designation
Mains
Reference
ICS
Serial No.
Tx level
Band
Sub-band
Type of cable
Length of cable
Cable attenuateur (upstream)
Cable attenuateur (downstream)
Tilt
Azimuth
Height of X-Pol RBS
Type of Mounting
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
305/346
308
Redundancy (1+1):
Designation
Mains
Reference
ICS
Serial No.
Tx level
Band
Sub-band
Onboard software
version
Type of cable
Length of cable
Tilt
Azimuth
Height of X-Pol RBS
Type of Mounting
306/346
308
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
A.1.3 – Check point list for BS commissioning
CHECKING THE SAFETY REGULATIONS:
– Equipment ground wire
OK
NOK
– Differential protection
OK
NOK
– Fire protection
OK
NOK
– No contaminants or possible outflow on the antennas and radio
OK
NOK
– No personnel allowed in the antenna fields
OK
NOK
– Use of torque wrenchs for the radio assembly
OK
NOK
– Mast rigidity and absence of vibration
OK
NOK
– Antenna clearance in immediate vicinity
OK
NOK
– Check that the ET390998 coaxial cable is installed
OK
NOK
– Radio grounding
OK
NOK
– No crushed cables
OK
NOK
– Observance of the minimum bend radius
OK
NOK
– Quality of cable ground wire installation
OK
NOK
– Sealing of ground relays on the cable
OK
NOK
– Min Max temperature of the premises containing the DBS (-5º to +55ºC) OK
NOK
– Check air inlets and outlets of the DBS backplane
OK
NOK
– Check the 48 Volt polarity
OK
NOK
– Check the ground wire of the DBS backplane
OK
NOK
– Check that all the client access cables are shielded
OK
NOK
– On the DBS panel, J101, J104 and J113 must not be connected
OK
NOK
– Check the optical fiber routing
OK
NOK
– Check the connection sequence of the X-Pol RBS cables on the panel
OK
NOK
CHECKING THE RADIO INSTALLATION:
CHECKING THE WIRING BETWEEN X-Pol RBS AND DBS:
CHECKING THE DBS INSTALLATION:
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
307/346
308
PAGE INTENTIONALLY LEFT BLANK
308/346
308
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
Appendix 2 – Installation of 7390LT software
A.2.1 – Requirements
1. Microsoft Windows NT operating system running (Service Pack 5 or above)
2. A7390LT installation Kit
3. User account with Administrator privileges to log-on with
Note: Users without Administrator privileges will not be able to install SNTP service, required to run
properly the A7390LT.
A.2.2 – Installation Procedure
1. Be sure you have administrator rights
2. Close all the aplications before start the 7390LT Installation
3. Insert the CD " 7390LT Software Package"
•
The window " 7390LT Software Package" appears
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
309/346
324
•
Click on "Install Software"
•
The window "Install Software" appears
•
Click on "7390LT Application Software Release 2.2a"
4. When the "Welcome" screen appears (see below), click on "Next" button to continue the installation
310/346
324
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
procedure or press "cancel" to exit the installation program.
5. The "Choose Destination Location" screen appears (see below). If you agree with the default
destination folder, click on the "Next" button. If you disagree, you can change it by clicking on
"Browse" button and selecting the desired destination folder.
Nota :
– If you use always the default directory, un-install the previous LT version before.
– If you want to install several LT versions on the same computer, use different folders at each time.
6. The "Select Program Manager Group" screen appears (see below). If you agree with the default
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
311/346
324
group name, click on "Next" button. If you disagree, you can change it by typing the desired name.
Note: If you want to install several LTs on the same computer use different names for the Program
group.
7. The "Start Installation" screen appears (see below). Now, you are ready to install the A7390LT (Craft
Terminal) in your computer. Click on the "Next" button to install it. You can cancel the LT installation
by clicking on the "cancell" button or you can chnage some of the choosen options by clicking on the
"Back" button.
312/346
324
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
8. The following window appears indicating that the LT installation is running.
9. If you dont't have administrator rights, the following window appears. The LT installation has not
been completely succesful, so you have to get administrator rights and start again.
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
313/346
324
10. The installation has been completed. The following window appears. Press OK to restart your
computer.
11. After copying files, the Simple Network Time Protocol (SNTP) service is installed and started. After
this, the installation process is complete.
12. Now, you are ready to run the 7390LT application.
314/346
324
Issue 01 - April 2001 - Draft 04
3CC12426AAAA TQ BJA 01
A.2.3 – License the .OCX files
1. Run the Ptlic32.exe file located in :
C:\Program_files\7390LT-Craft Terminal\Ptlic32.exe
The "Power TCP" windows appears.
2. Click on the "Licensing" button
The following window appears:
3. Enter the following values
Field
Value
Part
PT-119
S/N
119-4-697-23346
Company
Alcatel CIT
4. Click on Add
The license is printed in the box "Installed License"
5. Click on the license
6. Click on the "Stamp license" button
7. Select the following OCX file to stamp the license:
C:\WinNT\System32\ptsnmp32.ocx
A window appears on the screen mentioning that the licensing has been done succesfully.
8. Move back to the main window (see window above), click on the license detailed in the box "Installed
License", and then click on the Delete button.
3CC12426AAAA TQ BJA 01
Issue 01 - April 2001 - Draft 04
315/346
324

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2001:08:21 11:23:01-03:00
Create Date                     : 2001:08:21 11:22:45-03:00
Title                           : 3cc12426aaaaTQbja01.book
Creator                         : FrameMaker 6.0
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 15
Mod Date                        : 2001:08:21 11:23:01-03:00
Creation Date                   : 2001:08:21 11:22:45-03:00
Metadata Date                   : 2001:08:21 11:23:01-03:00

EXIF Metadata provided by EXIF.tools