Andrew Wireless Innovations Group RPT-MR703 Bi-Directional Amplifier for Small Area Indoor Coverage User Manual Appendix to

Download:
Mirror Download [FCC.gov]
Document ID	101847
Application ID	oC5T5Nu/bJxlU1KHbgHYhg==
Document Description	Appendix to user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	2.17kB (27137 bits)
Date Submitted	2000-05-24 00:00:00
Date Available	2000-07-10 00:00:00
Creation Date	2000-05-24 13:04:35
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-05-24 13:04:36
Document Title	Appendix to user manual

WARNING! While this device is in operation, a separation distance of
at least 20 centimeters must be maintained between radiating antennas
and the body of the user or nearby persons in order to meet the FCC RF
exposure guidelines.
Appendix A : Installation Checklist
The following checklist provides a summary of the procedures for installing a MR703D system:
Step
Item/ Action
MR703D Site Drawing
Equipme nt List:
MR703D
AC Power Outlet
Coverage Antenna*
Donor Antenna
50-ohm Donor Antenna Cable
50-ohm Donor Jumper*
50-ohm Coverage Antenna Cable
Installation tools:
Cable connector Tools*
Multimeter
Handset with Power Indicator
Run Cable
Attach Connectors*
Verify “Donor and
CoverageAntennas ” locations are
consistant with RF exposure warning
(see above and below).
Record Serial Numbers and Locations
on site Drawing.
Mount the Equipment
Connect the 50-ohm Cables as shown
on the Site Plan
10
11
Supply AC Power, and commission
the System.
Check Power Levels
Description
Master copy of the site plan noting the MR703D location and
serial number, and the location of the indoor coverage
antenna(s)). This should characterize the design parameters
for the system including cable paths and lengths.
Quantity:
Crimper, knife, etc.
To ensure no cable shorts.
To verify coverage after commissioning.
Install Cable in the site.
Measure across center pin and outer shell (ground) to ensure
no short.
Be sure to record the antennas location status for future
reference.
Note: this is to aid the Mikom Technical Support Specialists,
should you need their assistance.
Including indoor coverage antennas for metal case models.
Use caution when connecting semi-flexible cables to the
mounted MR703D and antennas. Excessive force on antenna
or MR703D connectors will result in serious equipment
damage.
Check the MR703D status as described in previous section .
Check power indication of handheld mobile at various
locations within the coverage area.
* As Required
WARNING! While this device is in operation, a separation distance of
at least 20 centimeters must be maintained between radiating antennas
and the body of the user or nearby persons in order to meet the FCC RF
exposure guidelines.
Appendix A : Installation Checklist:MR703D Users Guide Manual 149678 (m0041a3a, 5\00)
Page A-1
♦

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:05:24 13:04:35
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:05:24 13:04:36-04:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools