Apple A1954 Tablet Device User Manual iPad User Guide

Take a Live Photo. (on supported models) A Live Photo captures what happens just

before and after you take your photo, along with the audio. Choose Photo, tap to turn

on Live Photos (yellow is on), then tap the Shutter button. Live photos are marked with

“Live” in the corner. You can edit Live Photos and add filters to them in the Photos app.

Live Photos works with the rear camera and the FaceTime camera.

Take Burst shots. (on supported models) With the camera in Photo or Square mode,

touch and hold the Shutter button to take rapid-fire photos in bursts. Lift your finger to

stop. The counter shows how many shots youʼve taken. To see the suggested shots and

select the photos you want to keep, tap the burst thumbnail, then tap Select. The gray

Shutter button (the display flashes on exposure).

Take a panorama photo. (rear camera) Choose Pano, tap the Shutter button, then pan

slowly in the direction of the arrow. To finish the pan, tap the button again. To pan in the

other direction, first tap the arrow. To pan vertically, rotate iPad to landscape orientation.

Use the capture timer. Use the capture timer to give yourself time to be in the shot. First

set up iPad where you want, then frame your shot. Tap , tap 3s or 10s, then tap the

Shutter button.

Preserve camera settings. You can preserve the last camera mode setting you used so

then turn on Camera Mode. You can also preserve Live Photos settings on supported

Take a screenshot. To capture whatʼs displayed on your screen, simultaneously press

and then release the Home button and the Sleep/Wake button. Tap the screenshot, tap

Adjust shutter-sound volume. Adjust the volume of the shutter sound using the Ringer

Lock the focus and exposure. Exposure is automatic, but you can set the exposure

exposure and focus, touch and hold until the rectangle pulses. The screen indicates

when exposure and focus are locked. Take as many photos as you want. When you tap

the screen again, exposure and focus unlock, and the automatic settings and face

detection turn back on.

temporarily turned off.

Adjust the exposure. Tap to see next to the exposure rectangle, then slide up or

down to adjust the exposure.

trim videos

With Camera you can shoot video, including slow-motion and time-lapse videos.

to start and stop recording.

Change the frame rate and video resolution settings. Go to Settings > Camera >

the frame rate and the higher the resolution, the larger the resulting video file.

Snap a still while recording. Tap the white Shutter button.

slow motion. Tap Done.

to zoom in, and pinch closed to zoom out.

Capture an experience with time-lapse. Choose Time-Lapse, set up iPad where you

experiences over a period of time. Tap the Record button again to stop. The time-lapse

photos are compiled into a short video.

With iOS 9 and later, time-lapse videos have video stabilization, which minimizes the

effect of camera movement during capture.

On some models, you can choose HDR Auto so iPad uses HDR when itʼs most effective.

(by default, both the normal and HDR versions of the photo appear in Photos). In your

albums, HDR versions of photos are marked with “HDR” in the corner.

Photos and videos you take on iPad are saved in Photos. With

turned on, all new photos and videos are automatically uploaded and available in Photos

on all your devices with iOS 8.1 or later that are set up with iCloud Photo Library. When

photos in the album from your devices set up with iCloud.

Upload photos and videos. Use to upload photos and videos from

Sync photos and videos to iPad from your Mac. Use the Photos settings pane in

iTunes. See .

Location Services

With Contacts, you can view and edit your contacts lists from personal, business, and

other accounts. You can also create contacts and set up a contact card with your own

Create a new contact. Tap .

Contacts > Siri & Search, then turn off Find Contacts in Other Apps.

Allow incoming texts or calls from a specific contact even if Do Not Disturb is on. Tap the

contact, tap Edit, tap Ringtone or Text Tone, then turn on Emergency Bypass.

search. You can also search your contacts using Search (see ).

example), touch and hold the call button, then tap a phone number.

If you use a third-party app to make video or audio calls, send messages, or send email,

Change how your contacts are sorted and displayed. Go to Settings > Contacts.

Share a contact. Tap a contact, then tap Share Contact. See . Sharing a

contact shares all the info from the contactʼs card.

a photo or add one from the Photos app.

Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit.

Then tap the label and choose one from the list, or tap Custom Field to create one of your

own.

Add your friendsʼ social profiles. While viewing a contact, tap Edit, then tap “add social

Complete your My Card. Open Contacts, tap My Card at the top of your contacts list,

then tap Edit. Contacts suggests addresses and phone numbers to help you set up your

If there is no My Card, tap , then enter your information. To create a My Card with this

Besides adding contacts individually, you can:

Link contacts. If two entries for the same person arenʼt linked automatically, you can

When you link contacts with different first or last names, the names on the individual

In the Clock app, you can count down from a specified time with the timer or measure the

See cities and landmarks from above with Flyover. Flyover is available for select cities

and landmarks. Tap the name of a city (in Map or Satellite view) or tap the name of a

landmark, then tap Flyover in the banner (Flyover Tour on iPad mini). To return to the

On supported models, view a city or landmark from above:

Flyover cities are indicated by next to their names in Map view. If you donʼt see

Flyover locations are identified by the Flyover button in their banners.

such as lights, locks, thermostats, window shades, smart plugs, cameras, and more. With

After you set up your home and its rooms, you can control accessories individually, or use

scenes to control multiple accessories with one command. For example, you might create

a scene called “going to bed” that turns off the lights around the house, dims the lights in

while youʼre away.

The first time you open the Home app, the setup assistant helps you create a home,

where you can add accessories and define rooms. If you already created a home using

another HomeKit-enabled app, youʼll skip this step.

Add an accessory to your home. To add an accessory to Home, make sure the

accessory is turned on, tap , tap Add Accessory, then follow the onscreen instructions.

give it a name. The name defines how itʼs shown in the Home app, and also how you

control it using Siri.

Control an accessory. Tap an accessoryʼs button to quickly turn it on or off, or touch and

hold the button until controls appear. The available controls depend on the type of

accessory it is. For example, with some lightbulbs, you can change colors. You can also

control accessories using .

Change HomePod settings with the Home app.

Touch and hold the accessoryʼs button until its controls appear, then tap Details. Tap

Location to assign it to a room.

appear, then tap Details.

the roomʼs name, wallpaper, or delete the room.

Make an accessory a favorite. Touch and hold an accessoryʼs button until its controls

appear, then tap Details. Then turn on “Included in Favorites.” You can access your

favorite accessories from the Home tab.

Change an accessoryʼs icon. Touch and hold an accessoryʼs button until its controls

Control Center

Create and use scenes

Scenes allow you to control multiple accessories at once. For example, you might define

a “Reading” scene that adjusts the lights, closes the drapes, and adjusts the thermostat.

before theyʼll work.

Create a scene. Tap , enter a name for the scene (such as “Dinner Party” or

“Watching TV”), then tap Add Accessories. Select the accessories you want this scene to

control, then tap Done. Next, set each accessory to change it to the state you want it to

be when the scene is run. For example, you can set up a scene that turns on lights in the

bedroom, and turns off the kitchen lights, when youʼre going to bed.

Run a scene. Tap a scene to run it. If you donʼt see the scene you want to run, look in a

the scenes youʼve created:

access. Automations can run scenes automatically based on the time of day, your

location, a sensor being activated, or the action of an accessory. The Apple TV,

accessories. Apple TV 3rd generation can also provide remote access, but doesʼt support

creating or editing automations using the Home app.

Use iPad for automations and remote access. Go to Settings > Home, then turn on

“Use this iPad as a Home Hub.” When iPad is in your home, it will run your Home

automations even when your iPhone or iPod touch is not present.

If you have an Apple TV and youʼre signed in using the same Apple ID as your iPad, it will

be paired automatically and enabled for automation.

to have iCloud set up. If you have an Apple TV (4th generation or later) or HomePod, or if

controls are available that let you set what guests are able to do.

Give others control. Tap , tap Home Settings, tap a home, tap Invite, then choose

people from your contacts list or enter their email addresses.

from your supported apps in one place. You can continue watching content you

purchased or rented from the iTunes Store, or you can go to the next episode in a TV